Data form for entering conversion rates

Hi,
I am trying to create a data form for input of conversion rates. For example in the line given below I want to create a data form to convert USD to euro and I want to enter 1.05742 through the data form. I am not sure how to select USD and EUR from custom 1 and custom 2 members. where do I see this option?
Actual; 2005; January; Periodic; [None]; [None]; AverageRate; [ICP None]; USD; EUR; [None]; [None]; 1.05742
I am new to HFM and any help will be appreciated.
Thanks

That looks right to me. C1 will be USD and C2 will be EUR. Entity will be [None]. To choose USD and EUR in C1 and C2, make sure to change the 'Selector' dropdown box on the form to "Currencies".

Similar Messages

I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where

I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections. I need to be able access files without going to acrobat.com. Help!!!@

Post the PDF files to a web site. The browse to them in Safari on the iPad. When you Open the files specify the Open to occur in Adobe Reader. Then you can have/Save them in your Documents folder on the iPad. An iPad has limited access to files otherwise.

Where to enter conversion rates

Hi,
We are trying to implement a case study in bpc for 1st time and am not aware where I should enter currency conversion rates.I have included all local currency in entity under currency property.
Should all this currencies be members of input currency?
I have included RPTcurrency in the dimensions I used and Inputcurrency in only Rate application.Should I include Inputcurrency any where else?
Awaiting for your response.

The rates are entered into the RATE application, by RATETYPE and INPUTCURRENCY. So, if you have 10 Input currencies defined and ENTITIES that will use one of the 10 defined currencies, then you need to ENTER in the RATE cube 10 currency values, by TIME, by category. The dimension named InputCurrency is limited to the RATE cube in standard designs, based ONLY on its function.
In the core Reporting cube, such as FINANCE, RPTCURRENCY defines the available views of the combined FX results. SO, if you want to see the 10 currencies in EURO and GBP, then you need to define those currencies as members in the RPTCURRENCY dimension. This also requires you to set up the properties correctly by reproting currency. PLus, make certain tha tyou enter the cube's script logic section and open the FXTRANS and defualt logic scriipts, Validate and Process the scripts to account for the changes you have made to the dimensionality.
Hope this helps.

Link file name to a field in the form for save as button

Does anyone know how to have the file name auto populate from a field in your form when using a button that does a save as function?
Best regards,
Michael

Hi
Details:
JSP - Contains a Form for entering ID number.
Java Bean - Stores the ID number entered into the Form of the JSP page and also has the SQL Statement Object
The Problem: Where should you put the SQL Statement Object ?
Possible Solution: I think you are confused about SQL statements execution. This is what you can do. The Retrieved Id number from the Form has to be appended to the preformatted String which has the SQL statement stored in it. Once this is done this statement may be executed to retrieve the data associated with the ID number , if it exists.
Here is a link that should help you build an SQL statement on the fly and execute it. Try out some of the examples.
http://java.sun.com/docs/books/tutorial/jdbc/
Good Luck!
Eshwar Rao
Developer Technical Support
Sun mcirosystems inc
http://www.sun.com/developers/support

Reg:Currency Conversion Rates

Hi All,
How can I get the history rate and Conversion rate for a particular currency for a particular date.
For example I have given INR as currency in my screen on a particular date(Hist Date). Then the rate of INR against USD will be the HISTORY RATE.
And if I change the currency to some other currency on some other date (CONV Date) then the rate of that currency against USD on that date will be the CONVERSION RATE.
So how can I calculate these.Do we have any function modules or any tables in which I can get the SAP Exchange rates, so that my issue gets resolved.
Please help me in resolving this issue.
Thanks,
Khan.

hi see this thread
Re: Finding currency date
table ortt will help u.

How to enter Currency Rates

According to User's Guide, place Custom1 on row and Custom2 on column in data grids to enter currency rates. But Custom1 is Products dimension and Custom2 is Customer dimension in Simple Demo application. How can I enter rate between US$ and EURO?

As Kelly says you have to select the system defined members of Custom1 and Custom2. You can locate those members from the POV selector for each of the two custom dimensions, by choosing the Currencies member list in the combo box right over the dimension hierarchy. Also be careful to choose the right account (corresponding to the average or period end rate) as well as the right Entity. By entity = [None] the rate works for any entity using that currency. However, if you choose an entity other than [None], the rate will work for only that entity overriding any value set for the same currency in the [None] entity. (You may apply historical rates per entity this way).

Hyperion Data form issue

Hi,
I have created one dataform,in that data form for one particular member the data is aggregating with additional value(10)
But the same data form in another folder is working fine.
Can any one help me on this issue with a solution.
Thank You in advance
Ram

Hi Ram,
It cannot be the case .
The cell values of dimensions does not depend upon the folder, in which the data form is saved.
You need to recheck.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Where are planning data forms stored ?

are they stored as a file on the server with a file extension
or are they completely stored in db tables ?
we want to use data forms for versioning and moving from DEV to QA instances etc
is there any way to do this ?

The planning forms can be exported (.xml) and imported into the target planning application.
FormDefUtil.cmd is used for this purpose, it is present in <HYPERION_HOME>\Planning\bin folder
goto the aboce location (via cmd prompt) and use the syntax "formdefutil <import|export> <filename|formname|-all> <server name> <user name> <password> <application>"
The files would be saved in the same location and can be imported into the target planning application using the above syntax.
Hope this helps.

Wrong exchange rate entered for MRC conversion. How to correct it?

Oracle GL with MRC instance
RDBMS : 9.2.0.5.0
Oracle Applications : 11.5.10.2
We entered wrong exchange rate in daily rates for MRC conversion for APR-11 period. Users already posted 5000 je lines in local currency which have been booked in MRC books with the wrong exchange rate.
Is it possible to reverse those JEs and then correct the exchange rate and re-enter the period JEs?
Is there another alternative?
In AR there are some invoices and payments but no accounting process have been executed. If we correct the x-rate and then run Payables Accounting Process will those transactions be accounted with the correct x-rate?
Any advice will be welcome.
Francisco.

First thing is, "Maintain Masterdata" option is disabled for 0RTYPE, because Master / Text data is not enabled for this object. This is the only reason, why system does not allow you to maintain the master data.
Regarding the SID error, have you restricted the 0RTYPE with the 9165 in your query?
- Danny

How is Form Conversion Rate been calculated

Can anyone help me understand how the form conversion rate been calculated in the Landing Page Activity for Date Range report in Insight? Trying to figure out the conversion rates been measured in this report, so that we can properly interpret the results from below. Thank you in advance!
Landing page Activity for Date Range in Insight
Landing Page
Total Visits (by visitor)
Total Page Views
Total Visitors
Average Page Time
Total Form Submissions
Form Conversion Rate
my.learning.com/forms
381
422
375
0:09:25
28
100.00%
Transition | LP
18
28
17
0:05:53
2
100.00%
GoCool.html
17
18
14
0:13:09
56
77.78%
Summer Training 2015 Confirmation | EMAIL
21
34
14
0:08:15
22
57.89%
events.Training.com/forms/ISContactUs
27
57
25
0:05:29
21
45.65%

Thanks so much for your detailed reply!
I checked into "Landing Page Activity for Date Range" report again and accidently hovered over "Form Conversion Rate"; it displayed the formula as "Total Form Submissions / Total Form Views". I added that metric to the report and saved locally. Now the Form Conversion Rate does equal to the calculation of Total Form Submissions / Total Form Views; data copied below. However, that formula is different from the one specified in the "Insight_ReportDetails_Guide", which is "Total Submits / Total Page Views").
Now, here comes the new questions for your help/ideas/suggestions -
    - How come in our "Landing Page Activity for Date Range", the formula for Form Conversion Rate is different from the one listed in "Insight_ReportDetails_Guide"?
    - Can we change it to use this formula: Total Submits / Total Page Views?
    - Which one indeed is the correct calculation for Form Conversion Rate in "Landing Page Activity for Date Range" report?
Landing Page
Total Visits (by visitor)
Total Page Views
Total Visitors
Total Form Views
Total Form Submissions
Form Conversion Rate
Landing Page 1
5
6
5
6
0
0.00%
Landing Page 2
58
86
56
3
3
100.00%
Landing Page 3
14
15
13
15
2
13.33%
Landing Page 4
16
17
16
0
0
0.00%
Landing Page 5
66
144
55
143
1
0.70%
Landing Page 6
21
47
20
45
1
2.22%
Landing Page 7
24
25
13
25
6
24.00%
Landing Page 8
12
13
12
13
3
23.08%
Landing Page 9
31
37
27
6
6
100.00%
Landing Page 10
24
33
21
31
4
12.90%
Thank you very much!
Xuan

Can you enter cumulative numeric rating data per response in colums on the Formcentral Data Form?

Can you enter cumulative numeric rating data per response in colums on the Formcentral Data Form?
In other words can you rate each responce numerically - have it add up per responce etc... - and then divide up the responces by the accumulated ratings ( All rated 5 ) (All rated 8) etc... ?
Thanks
Al

Hi Brian
The form is a grant application where the applicants are rated on their responses.
The ratings are done after the answers are accumulated in the Formscentral contol panel. The ratings are done by 3 other project members (VPs).
These ratings are in 3 catagories, each catagory is worth up to 5. The VP's will access the form central panel and rate each applicant per catagory.
I have added 3 catagory colums with multiple choice rating selections from 1 to 5 for each of the 3 VP's for a total of 9 colums (3 x 3 catagories)
The reason I did it this way is because at this point I would be relying on an Exel download to calculate the winner or/and also the top rated winners
per the ratings that the 3 VP's put on them per catagory.
Thanks for your help - do you have any suggestions to make this smoother.
Thanks
Al

Customer Exit for Number of Days from 1 st Apr to last date of Month Enter

Hello BI Experts,
I have a requirement to count the number of days from 1 st April of current year to the last date of month entered.
For example : The use will enter say July 2010 or 003.2010 (as Fiscal Year Variant is V3 ).
Today is 14 July ...So we have to first find out the end date of the July month ie 31 st July
Then go to 1 st April 2010.
Now calculate the Number of days between 1 st April to 31 st July 2010.
I consider I have to create two Customer Exit variable
as below
1 st customer exit Bex variable say ZLY_MTH ( Last day of Month Entered)
and i_step = 1
2 nd Customer Exit BEx Formula variable say ZF_NUMDAYS ( Number of days between two dates)
i_step =1 .
Please provide me the logic for the above two.
Thanks in Advance.
Regards,
Amol Kulkarni

PSUDEO CODE:
1. Initially LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = 'ZMONTH'.
2. Get the Month input using VAR_MONTH2 = LOC_VAR_RANGE-LOW+4(2)
3. Now calculate Month+1: VAR_MONTH2 = VAR_MONTH2 + 1 (Refer **)
4. Now calculate the Current Year: VAR_YEAR = LOC_VAR_RANGE-LOW+0(4).
5. Get the 1st Day of the Month (VAR_MONTH2): CONCATENATE '01' '/' VAR_MONTH2 '/' VAR_YEAR INTO L_S_RANGE-LOW.
6. SUBRACT 1 (0DATE) from this DATE (This will give the logic for last day of the current month)
Insert this code also for using the date conversions
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = VAR_MONTH2
          IMPORTING
            OUTPUT = VAR_MONTH2.
Pls. check out this logic. Guess it would solve your need.
Thanks,
Arun Bala

Error entering data in a data form using Smart View

One of my user is facing an issue while entering data in a data form through Excel, if she uses the same data form in workspace she is able to enter data. She is facing the issue while entering in a specific column, for all other columns she is able to enter data in the data form. It is only one column for which she is facing issue while using smart view/excel and not workspace, as in workspace she is able to enter data.
Thanks,

Hi
Check they have the "Data Form Write Back from Excel" role in Shared Services.
See p.133 of the security guide for more info -
http://docs.oracle.com/cd/E17236_01/epm.1112/hss_admin_1112200.pdf
Regards
jpr

In Hyperion Financial Reporting can we show comments entered in data forms?

Hi,
I want to show comments in Hyperion financial reports. The data form are against BSO cube and when users enter comments in it they want to see in reports which are against ASO.
Also, if you can help me if it is possible against same cube?

Hi,
I think we can't show it in ASO, but if we have a BSO cube then we have to connect our reports with the Planning data source instead of an Essbase data source and specify on the report to show supporting detail.
You have to do some settings in the FR_Global.properties which are:
AllowCellTextAsAnnotation=true, the Cell Text check box on the Report Property sheet is shown (for Financial Management and Planning, not Essbase yet). The default setting will be unchecked (turned off).
AllowPlanningUnitAnnotationsAsAnnotations=true, the Planning Unit Annotations check box on the Report Property sheet is shown for Planning. The default setting will be unchecked (turned off).
AllowDocAttachmentsAsAnnotations=true, the Document Attachments check box on the Report Property Sheet is shown for Financial Management. The default setting will be unchecked (turned off).
Hope this helps.
Regards
SST.....

Cost and/or Conversion Rates are missing for some planning resources

Hi,
In Workplan of projects, we are facing a issue "Cost and/or Conversion Rates are missing for some planning resources". even though the schedules for the project WP is defined.
Any inputs on this is highly apprciated. Thanks !!!
Regards,
Pallavi

Did you check the Cost for all the Planned Workplan Budget Lines. Generally, this type of error comes when the Quantity is defined but the Cost is missing for any Line. Find that Planned Workplan Budget Lines and enter the Cost for them and save it.
I hope it may help you.
Regards,
Khan.

Data form for entering conversion rates

Similar Messages

Maybe you are looking for