Data from different tables in EIS

I am trying to build EIS 6.5.1. model so it loads data for Actual from one table, and for Budget from another one, into a cube with Scenario dimension - Actual and Budget. I know workaround for this (creating one table with merged data separated by Scenario), but I was wandering is there another way to do it? I could probably create the separate model for each table as a source and change my Scenario Default member, but... How 'bout some elegance and simplicity?Any advice or a guideline appreciated,=================M. SladicCIBC-AGS, [email protected]

If you use SQL Interface to load the data instead of EIS, you can easily accomodate this, either as a single load or possibly a two-pass load. I always prefer to use SQL interface to load the data as it is much easier, you can use load rules to manipulate/transform data as necessary, and you can use error files that are produced. Drill through still works as it is only dependent on outline generation, not data loading. This will require a license of SQL Interface, however.

Similar Messages

  • How to display multiple data from different table in one table? please help

    Hi
    I got sun java studio creator 2(the separate installation not the one in the net beans)....
    My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
    when i want to use a sql statement that taken the data from different table...
    how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
    Note:
    1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
    2) i mean by different table is that( i.e. select a from table1,table2 )..
    thanks in advance...

    Hi,
    937440 wrote:
    Hi every one, this is my first post in this portal. Welcome to the forum!
    Be sure to read the forum FAQ {message:id=9360002}
    I want display the details of emp table.. for that I am using this SQL statement.
    select * from emp where mgr=nvl(:mgr,mgr);
    when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
    1)I want to display all the records when I won't give any input including nulls
    2)I want to display all the records who's mgr is null
    Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
    The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
    SELECT  *
    FROM     emp
    WHERE     LNNVL (mgr != :mgr)
    ;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
    The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
    SELECT     *
    FROM     emp
    WHERE     :mgr     = mgr
    OR       :mgr       IS NULL
    ;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
    The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
    SELECT     *
    FROM     emp
    WHERE     DECODE ( mgr
                , :mgr, 'OK'
                )     = 'OK'
    ;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

  • Retriving of data from different tables

    retriving of data from different tables depening of the primary key  this key field is there in all tables   if it is there in one v table it should continue to other tables otherwise it should get exit from that it should display information message or otherwise success  message if it is there in all tables .

    Im writing the concept, just check it.
    SELECT * from kna1 into lt_kna1.
    if sy-subrc eq 0.
       selest * from lfa1 into lt_lfa1
    for all entries in lt_kna1.
    endif.

  • Fetch data from different tables print them is assigned places

    Hi Friends,
    I have designed one SMART-Form (Receipt).
    I need to fetch data from different tables and the data must be print in assigned places. Please help me how to achieve this requirement. Thanks for your help.
    Best regards,
    Manju.
    Edited by: Alvaro Tejada Galindo on Feb 12, 2008 10:20 AM

    U're right.
    When it creates a smartform it needs to decide when the main data have to be extracted:
    - or in driver program
    - or in smartforms
    The difference can be in the performance, because the program can select the data only once, the smartforms needs to extract them everytime it's called.
    I prefer to use a complex structure for the smartform interface as so all data I need are in only one structure, the problem is the complex structure is harder to be managed.
    Max

  • Procedure to check data from different tables

    Hi
    I am trying to write a procedure to compare data from a table with another.
    Table 1
    ID Name Dept
    1 ABC Y
    2 DEF Z
    Table 2
    ID Dept
    1 Y
    2 Z
    Table 3
    Name ID
    1 ABC
    2 DEF
    I would like to compare each record data in Table 1 with data from different tables table2,table3 by matching ID,name.... Please help me with how I could start writing a procedure and also spool data that does not match from the table1 with other tables
    thanks
    Edited by: 890563 on Apr 30, 2012 10:34 AM

    Hope below helps you.
    CREATE TABLE TABLE1
    (    ID          VARCHAR2(10),
         FIRST_NAME  VARCHAR2(30),
         LAST_NAME   VARCHAR2(30),
         MIDDLE_NAME VARCHAR2(30)
    INSERT INTO TABLE1 VALUES('123456','testfirst','testlast','testmiddle');
    INSERT INTO TABLE1 VALUES('123457','testfirst1','testlast1','testmiddle1');
    CREATE TABLE TABLE1
    (    ID          VARCHAR2(10),
         FIRST_NAME  VARCHAR2(30),
         LAST_NAME   VARCHAR2(30),
         MIDDLE_NAME VARCHAR2(30)
    INSERT INTO TABLE2 VALUES('123456','testfirst','testlas','testmidd');
    INSERT INTO TABLE2 VALUES('123457','testfirst2','testlast1','testmiddle1');
    SELECT TABLE1.ID,
            -- Match First Name
         CASE WHEN TABLE1.FIRST_NAME != TABLE2.FIRST_NAME THEN TABLE1.FIRST_NAME ELSE NULL END TABLE1_FIRST_NAME,
         CASE WHEN TABLE1.FIRST_NAME != TABLE2.FIRST_NAME THEN TABLE2.FIRST_NAME ELSE NULL END TABLE2_FIRST_NAME,
            -- Match Middle Name
         CASE WHEN TABLE1.MIDDLE_NAME != TABLE2.MIDDLE_NAME THEN TABLE1.MIDDLE_NAME ELSE NULL END TABLE1_MIDDLE_NAME,
            CASE WHEN TABLE1.MIDDLE_NAME != TABLE2.MIDDLE_NAME THEN TABLE2.MIDDLE_NAME ELSE NULL END TABLE2_MIDDLE_NAME,
            -- Match Last Name
         CASE WHEN TABLE1.LAST_NAME != TABLE2.LAST_NAME THEN TABLE1.LAST_NAME ELSE NULL END TABLE1_LAST_NAME,
            CASE WHEN TABLE1.LAST_NAME != TABLE2.LAST_NAME THEN TABLE2.LAST_NAME ELSE NULL END TABLE2_LAST_NAME
    FROM  TABLE1, TABLE2
    WHERE TABLE1.ID = TABLE2.ID
    ID         TABLE1_FIRST_NAME  TABLE2_FIRST_NAME  TABLE1_MIDDLE_NAME TABLE2_MIDDLE_NAME TABLE1_LAST_NAME   TABLE2_LAST_NAME
    123456     NULL               NULL               testmiddle         testmidd           testlast        testlas
    123457     testfirst1         testfirst2         NULL               NULL               NULL            NULL
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Report using Data from different tables

    Hello,
    I am trying to convert a Cobol batch program to Oracle 6i tabular report.
    The data is fetched from many different tables and there are lots of processing(i.e, based on the value of a column from one table need additional processing from different tables) required to generate the desired columns in the final report.
    I would like to know what is the best strategy to follow in Oracle Reports 6i. I heard that CREATE GLOBAL TEMPORARY TABLE is an option. ( or REF CURSOR ?) I do not know much about its usage. Can somebody guide me about this or any other better way to achieve the result.
    Thank you in advance
    Priya

    Hello,
    There are many, many options available to you, each of which has advantages and disadvantages. This is why it is difficult to answer "what is best?" without alot more details about your specific circumstances.
    In general, you're going to be writing PL/SQL to do any conditional logic that cannot be expressed as pure SQL. It can executed in the database, or it can executed within Reports itself. And most reports developers do some of both.
    As a general rule, you want to send only the data you need from the database to the report. This means you want to do as much filtering and aggregating of the data as is readily possible within the database. If this cannot be expressed as plain SQL queries, then you'll want to create a stored procedures to help do this work.
    Generally, the PL/SQL you create for executing within the report should be focused on control of the formatting, such as controlling whether a field is visible, or controlling display attributes for conditional formatting.
    But these are not hard and fast rules. In some cases, it is difficult to get all the stored procedures you might like installed into the database. Perhaps the dba is reluctant to let you install that many stored procedures. Perhaps there are restrictions when and how often updates can be made to stored procedures in a production database, which makes it difficult to incrementally adjust your reports based on user feedback. Or perhaps there are restrictions for how long queries are allowed to run.
    So, Reports offers lots of options and features to let you do data manipulation operations from within the report data model.
    In any case, Oracle does offer temporary table capabilities. You can populate a temp table by running stored procedures that do queries, calculations and aggregations. And you can define and initiate a dynamic query statement within the database and pass a handle to this query off to the report to execute (ref cursor).
    From the reports side, you can have as many queries as you want in the data model, arranged in any hierarchy via links. You can parameterize and change the queries dynamically using bind variables and lexicals. And you can add calculations, aggregations, and filters.
    Again, most people do data manipulation both in the database and in Reports, using the database for what it excels at, and Reports for what it excels at.
    Hope this helps.
    Regards,
    The Oracle Reports Team --skw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Retrieving Data from different Tables with same tuple name

    Hi,
    I am made the following query from different tables. A tuple "name" is appearing in some tables. So when I run the qiery in a Java class, it delivers the same result of c.name, bpl.name and p.name. The result of c.name is correct, but the other 2 names are overwritten. It works perfect in a postgreSql query tool. How can I correct it, plz?
    SELECT c.ad_client_id, c.name, o.c_order_id, o.ref_order_id, bp.name, bpl.name, o.dateordered, o.datepromised, od.c_orderline_id,p.m_product_id,p.name, cur.iso_code, od.qtyordered
    FROM adempiere.ad_client c, adempiere.c_order o, adempiere.c_orderline od, adempiere.c_bpartner bp, adempiere.m_product p, adempiere.c_bpartner_location bpl, adempiere.c_currency cur
    WHERE c.ad_client_id =11 and c.ad_client_id = o.ad_client_id and bp.c_bpartner_id=o.c_bpartner_id and o.c_order_id = od.c_order_id and od.m_product_id = p.m_product_id and o.c_bpartner_location_id =bpl.c_bpartner_location_id and o.c_currency_id=cur.c_currency_id;
    Cheers

    Hi,
    create alias, if u have similar field names as below. Use the alias name (rs.getString("cname") and rs.getString("bpname") and so on ) to retrive data.
    SELECT c.ad_client_id, c.name as cname, o.c_order_id, o.ref_order_id, bp.name as bpname, bpl.name as bplname, o.dateordered, o.datepromised, od.c_orderline_id,p.m_product_id,p.name as pname, cur.iso_code, od.qtyordered
    FROM adempiere.ad_client c, adempiere.c_order o, adempiere.c_orderline od, adempiere.c_bpartner bp, adempiere.m_product p, adempiere.c_bpartner_location bpl, adempiere.c_currency cur
    WHERE c.ad_client_id =11 and c.ad_client_id = o.ad_client_id and bp.c_bpartner_id=o.c_bpartner_id and o.c_order_id = od.c_order_id and od.m_product_id = p.m_product_id and o.c_bpartner_location_id =bpl.c_bpartner_location_id and o.c_currency_id=cur.c_currency_id;Regards,
    Ram

  • Extraction of data from different tables

    hi,
    i have requirment as following .
    I have tables EKET,EKKO,EKPO,EKKI,EKPA for all the tables there is common primary key (EBELN,EBELP),but i want to bring the all the data from all tables by using join,how to bring  all the data can any body give me the idea.
    Thanks,
    Rammohan.

    hi,
    search for exisintg views with: se11-search
    and fill primary and base table
    or create your own view
    A.
    Message was edited by: Andreas Mann

  • Retrieving data from different tables in the same time crash

    Hi
    this is probably the wrong way to do it, but this is how I did:
    - I wanted a screen with 3 datagrids components retrieving data from 3 different tables.
    - I could make it work while enabling 1 or 2 of them.  When the 3 are enabled, I get this error:
    btw its a huge msg, I will trim it:
    ArgumentError: Can't find ManagedQuery or ManagedOperation named: getItems_paged     at mx.data::RPCDataServiceAdapter/executeQuery()[C:\depot\DataServices\branches\lcds_modeler 101\frameworks\projects\data\src\mx\data\RPCDataServiceAdapter.as:325]     at mx.data::RPCDataServiceAdapter/processDataMessage()[C:\depot\DataServices\branches\lcds_m odeler101\frameworks\projects\data\src\mx\data\RPCDataServiceAdapter.as:920]     at RPCDataServiceRequest/invoke()[C:\depot\DataServices\branches\lcds_modeler101\frameworks\ projects\data\src\mx\data\RPCDataServiceAdapter.as:1668]     at mx.data::DataStore/http://www.adobe.com/2006/flex/mx/internal::invoke()[C:\depot\DataServices\branches\lcds_m odeler101\frameworks\projects\data\src\mx\data\DataStore.as:3343] ...  it continues forever. 
    the getItems_paged is a auto generated function inside the php class flex generates to handle the tables.
    Each of the datagrid is a custom component. I made so to avoid keeping a bunch of code lines in the main 'page'.
    Any suggestion to make it work smoothly?
    Thanks in advance,
    btp~

    Hi
    this is probably the wrong way to do it, but this is how I did:
    - I wanted a screen with 3 datagrids components retrieving data from 3 different tables.
    - I could make it work while enabling 1 or 2 of them.  When the 3 are enabled, I get this error:
    btw its a huge msg, I will trim it:
    ArgumentError: Can't find ManagedQuery or ManagedOperation named: getItems_paged     at mx.data::RPCDataServiceAdapter/executeQuery()[C:\depot\DataServices\branches\lcds_modeler 101\frameworks\projects\data\src\mx\data\RPCDataServiceAdapter.as:325]     at mx.data::RPCDataServiceAdapter/processDataMessage()[C:\depot\DataServices\branches\lcds_m odeler101\frameworks\projects\data\src\mx\data\RPCDataServiceAdapter.as:920]     at RPCDataServiceRequest/invoke()[C:\depot\DataServices\branches\lcds_modeler101\frameworks\ projects\data\src\mx\data\RPCDataServiceAdapter.as:1668]     at mx.data::DataStore/http://www.adobe.com/2006/flex/mx/internal::invoke()[C:\depot\DataServices\branches\lcds_m odeler101\frameworks\projects\data\src\mx\data\DataStore.as:3343] ...  it continues forever. 
    the getItems_paged is a auto generated function inside the php class flex generates to handle the tables.
    Each of the datagrid is a custom component. I made so to avoid keeping a bunch of code lines in the main 'page'.
    Any suggestion to make it work smoothly?
    Thanks in advance,
    btp~

  • How to Select Data from different Tables Using Linq

    Hi,
    I have two different tables, I just want to collect data from tables using Linq to SQL Queries.
    The tables looks like This 
    ID Name ImageUrl 
    Other Table is
    ID EmpID CheckInTime CheckOutTime 
    What I want to Collect data from CheckInTime and want to place it in a that is in a list view
    Same thing I want to do it for CheckOutTime And One thing I want to tell is both tables are joined by a FK EmpID with ID.
    What Are the suggestions for me 
    I have Used this code
    var data = from emp in db.Employees
    join chk in db.CheckInCheckOuts on emp.ID equals chk.EmpID
    select new EmployeeCheckInOut
    Name = emp.Name,
    ImageUrl = emp.ImageUrl,
    CheckIn = emp.CheckInCheckOuts,
    CheckOut = emp.CheckInCheckOuts
    Here the CheckInCheckOuts is another table, I don't how do I access fields of the Other table "CheckInCheckOuts"
    Thank you
    Ali

    Mitja,
    Kind of Tables, I don't Know but I can Tell you that these are Two table, first Table Have Data in It, Name, ImageUrl I have filled this table with names and ImageUrls And are string type.Other Table is for the CheckInTime And CheckOutTime of the employee.
    What I need that when I click on the Image button it Should displays The Current Datetime into the label below the Image button.
    So I have Problem accessing my CheckInCheckOut Table because I may not have Idea about.Did you understand what I need to do, if you have more question please ask to me.
    Thanks
    Ali

  • Extracting data from different tables

    HI
    can some one help me to extract the data from:
    NATION field from ADRC table + Company code (BURKS) field from LFA1.
    I am using SQVI (query), but not succeeded. Please help me.....
    Thanks
    NIlesh

    Hi,
    see this sample code based on the name u have to get i think..
    SELECT SINGLE * FROM lfa1 INTO i_lfa1 WHERE lifnr = i_ekko-lifnr.
          IF sy-subrc = 0.
            *SELECT SINGLE * FROM adrc INTO i_adrc WHERE name1 = i_lfa1-name1.*
           IF sy-subrc = 0.
              i_zzep_pohdr_s-ven_name = i_lfa1-name1.       "5
              i_zzep_pohdr_s-ven_addy1 = i_adrc-street.      "6
              i_zzep_pohdr_s-ven_strt2 = i_adrc-str_suppl1. "7
              i_zzep_pohdr_s-ven_strt3 = i_adrc-str_suppl2. "8
              i_zzep_pohdr_s-ven_strt4 = i_adrc-str_suppl3. "9
              i_zzep_pohdr_s-ven_strt5 = i_adrc-location.  "10
              i_zzep_pohdr_s-ven_tel_no = i_adrc-tel_number.   "11
              i_zzep_pohdr_s-ven_tel_ext = i_adrc-tel_extens. "12
              i_zzep_pohdr_s-ven_fax_no = i_adrc-fax_number.  "13
              i_zzep_pohdr_s-nation = i_adrc-nation.  "14         
            ENDIF.
          ENDIF.
    Regards,
    Kiran

  • How to return course  data  from different tables from a procedure

    I have a procedure which must return information from two tables:
    The sturcture of tables is as below:
    Table 1:
    id,
    name,
    property,
    type
    Table 2:
    id1
    id2 ,
    property.
    id1 of table2 refers to id attribute of table1. ie id is the foreign key for table2.
    the tables are defined such that for corresponding to each id in table1 there would
    be two or more rows in table2.
    Now in the procedure given the id, i need to retrieve information from table1 and also all the rows in table2 which refers to id2.I want to return a cursor.How can i do this.
    eg:
    if table 1 has an entry with id 2
    and table 2 has three entries with id1 referring to id(i.e id1=2)..I need to return the table1 entry with id=2 and three entires from table2 with id1=2.
    If cursors are not appropriate, what other alternative methods can be used.
    Any suggestions would be of great help.

    thanks for the reply,
    The result set would be returned to the client .....which would do further processing.The client does not even know that the data is organized in two tables..Therefore given an id, client would expect to have all the information...i.e the info from table 1 and info from table 2 where the relation ship between id and other ids are stored.
    i.e say client has id=6.This id has property,name,etc stored in table1.
    This id can further be related to any number other of ids.It can be related 2,5,100,or may be even 10000s of other ids.This mapping between the original id and other ids..are stored in table2.
    So given the id by the client , i would want to return property of the ids itself along with all the ids that it is related to .
    I want to achieve this.....

  • How to fetch data from different tables

    I have a view created based on Emp table. while querying the employee details i want to display the dept_ description from dept table. how can i do that ??
    Regards Abin

    you mean when you click on a emp table row you want to display dept. description?
    Use the following query in the view so you have all the required information. In the table selectionlistener get the dept. description and display it.
    SELECT distinct E.empno, E.ename, E.sal, D.dname
    FROM dept D, emp E
    WHERE E.deptno = D.deptno
    ORDER BY E.empno;

  • How to show data from different tables in database in ADF Jdeveloper 11g R2

    Hi,
    My requirement is to display the data in the grid (html > table), the data is to be displayed from more than one table in a single grid and thereafter I am supposed to display the sum of some of the records in another table, I am confused about this, plz help.
    Rajat

    The view link is generally used to relate two view objects together in the AMs data model, for example in a master-detail relationship. If you use them properly, ADF takes care of coordinating master/detail records - for example, ensuring that the detail record has the correct FK to the master record.
    Have you read the Fusion Developers Guide for ADF? [url http://docs.oracle.com/cd/E26098_01/web.1112/e16182/bcquerying.htm#CEGJCAHC]This section, for example?
    John

  • Move data from multiple Tables to a Single Table & Convert the list to ALV.

    Hi,
    My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
    Also tell me how to convert this list into ALV.
    Below is the program code.
    *& Report  Y_REORDER_REPORT
    REPORT  Y_REORDER_REPORT.
    tables : marc,makt, mard.
    DATA: Begin of i_final occurs 0,
            matnr type marc-matnr,
            maktx type makt-maktx,
            DISPO type marc-DISPO,
            MINBE type marc-MINBE,
            LABST type mard-LABST,
          end of i_final.
    DATA: Begin of i_marc occurs 0,
           matnr type marc-matnr,
           DISPO type marc-DISPO,
           MINBE type marc-MINBE,
          end of i_marc.
    DATA: Begin of i_makt occurs 0,
           matnr type makt-matnr,
           maktx type makt-maktx,
          end of i_makt.
    DATA: Begin of i_mard occurs 0,
           matnr type mard-matnr,
           LABST type mard-LABST,
           LGORT TYPE MARD-LGORT,
          end of i_mard.
    SELECT  matnr
            dispo
            minbe from marc
            into corresponding fields of table i_marc
            where dispo EQ 'STR'.
    SORT I_MARC by MATNR.
    WRITE: /10  'Material',
            75  'MRP',
            80  'Reorder Qty.'.
    LOOP at i_marc.
    Write: /10  i_marc-matnr,
            75  i_marc-dispo,
            80  i_marc-minbe.
    ENDLOOP.
    write: /.
    SELECT  matnr
            MAKTX from makt
            into corresponding fields of table i_makt
            for all entries in i_marc
            where matnr = i_marc-matnr.
    LOOP at i_makt.
    Write: /10 i_makt-matnr,
            30 i_makt-maktx.
    ENDLOOP.
    SELECT  matnr
            LGORT
            LABST from mard
            into corresponding fields of table i_mard
            for all entries in i_marc
            where matnr = i_marc-matnr.
    LOOP at i_mard.
    Write: /10 i_mard-matnr,
            30 I_MARD-LGORT,
            40 i_mard-labst.
    ENDLOOP.
    move  i_mard-matnr to i_final-matnr.
    move  i_marc-dispo to i_final-dispo.
    move  i_marc-minbe to i_final-minbe.
    move  i_makt-maktx to i_final-maktx.
    move  i_mard-labst to i_final-labst.
    WRITE: /10  'Material',
            30  'Material Desc.',
            75  'MRP',
            80  'Reorder Qty.',
            105 'Current Stock'.
    LOOP at i_final.
    Write: /10  i_final-matnr,
            30  i_final-maktx,
            75  i_final-dispo,
            80  i_final-minbe,
            105 i_final-labst.
    ENDLOOP.
    *LOOP at i_mard.
    *Write: /10  i_mard-matnr,
           30  i_makt-maktx,
           75  i_marc-dispo,
           80  i_marc-minbe,
           105 i_mard-labst.
    *ENDLOOP.
    Regards,
    Vishal

    Change like this,
    SELECT matnr
    lgort
    labst FROM mard
    INTO CORRESPONDING FIELDS OF TABLE i_mard
    FOR ALL ENTRIES IN i_marc
    WHERE matnr = i_marc-matnr.
    LOOP AT i_mard.
       WRITE: /10 i_mard-matnr,
       30 i_mard-lgort,
       40 i_mard-labst.
    ENDLOOP.
    LOOP AT i_marc.
       READ TABLE i_mard WITH KEY matnr =  i_marc-matnr.
       READ TABLE i_makt WITH KEY matnr =  i_marc-matnr.
       MOVE i_mard-matnr TO i_final-matnr.
       MOVE i_marc-dispo TO i_final-dispo.
       MOVE i_marc-minbe TO i_final-minbe.
       MOVE i_makt-maktx TO i_final-maktx.
       MOVE i_mard-labst TO i_final-labst.
       APPEND i_final.
    ENDLOOP.
    WRITE: /10 'Material',
    30 'Material Desc.',
    75 'MRP',
    80 'Reorder Qty.',
    105 'Current Stock'.

Maybe you are looking for

  • How to integrate BW with CRM?

    Dear All Experts, I need to integrate BW 7.0 with CRM 7.0. I have searched alot on forums regarding this. The more I search the more I got confused. some thread says that all CRM reporting is done from BW whereas some says standard crm reporting is d

  • Organization Structure In GP

    Hi All, I need to create a Organization Structure in Gp(Role Structue) similler to workflow,is it possible ?, Plz any one Suggest Regards, Vinoth Raja.V

  • Bug: For a migrated roaming profile from V2 to V3 browser history may not work ...

    Solution: Do a new profile ... or use the bug fix from Win8 and previous: https://social.technet.microsoft.com/Forums/ie/en-US/6418ae13-63c7-44a1-9e97-0ad875a2bd7a/browsing-history-not-being-recorded?forum=ieitprocurrentver#d16f8580-0d2a-40f7-8197-86

  • N Level Parent child hierachy (BO)

    Hi Tammy , Thanks a lot for the valuable information that you have provided . Can you please let me know whether we can handle N level hierarchy in 4.0 Universe in Member Ancester format . e.g Member_key       Ancenster_Key 1                         

  • Windows Bootcamp Drivers Trouble

    My Windows Vista Drivers that I got for my MacBook Pro from the installation disk have bad audio drivers. The sound on the speakers is too low, and the microphone won't even work. When I talk into the microphone while under Sound Properties in the Re