Data inconsistency: posting with restricted transaction type (FAA_POST047)

Hi colleagues!
I have the following error:
Data inconsistency: posting with restricted transaction type
Message no. FAA_POST047
Diagnosis
You are trying to post in company code 1000 with transaction type 130 in ledger group 0N. According to table TABWA, this transaction type is limited. Nonetheless, according to your entries, you want to post to area 11.
System Response
Using limited transaction types is obsolete and would lead to an inconsistent posting in this situation. The system rejects the posting.
Procedure
Use a transaction type that is not limited. And, if possible, choose the ledger group and/or depreciation area on the initial screen.
According to specific accounting we shouldn't post to one of the depr. area, so most of the tr.types are restricted to post to all areas except this one.
Because of this, posting from MM with acc.assignment 'A' is impossible - I have this error.
Any ideas how to solve?
Thanks in advance

Hi Anton
This looks like your transaction type -130 is limited to post only in ledger group-0N as per the transaction type configuration. Due to which system is unable to post all the ledgers and hence this lead to inconsistency.
Please verify the transaction type 130- in configuration T code - OAYA and see if it is restricted by depreciation area (eventually allow to post only ledger group- 0N.
Tcode - OAYA (Limit Transaction Types to Depreciation Areas)
please verify and let us know the update. hope this helps
Best Regards
Jomon

Similar Messages

  • BORGR 649 error message while posting with 105 mov type

    Hi Gurus,
    I faced a problem when I try to post with 105 mov type, when material doc is related to Inbound delivery.
    Explained better:
    I did a purchase order with inbound delivery confirmation.
    I carried out Good Receipt (related to Inb delievery) with mov type 103 (blocked stock from PO)
    When I try to post stock with 105 mov type, the following error appear:
    "Movement type 105 not allowed as it is not assigned to item category"
    Msg ID: BORGR
    Msg no: 649
    I already checked delivery item category configuration, movement types involved and transactions allowed for each mov types.
    Take care that the error mentioned doesn't occur if posting is related directly to purchase order, instead of inbound delivery..
    Thanks in advance
    Regards
    Ale

    Hi Sandra_PF
    in the inbound delivery the mov type is not 105, but 101 (correct, it's the default value for Inb delivery)
    With transaction MIGO I do 2 different operations (in 2 different moments):
    1°) Good Receipt referred to Inbound delivery (103 mov type - Blocked stock from PO)
    2°) Stock posting with 105 mov type, to transfer stock from Blocked to Unrestricted
    Here the system notice me that is not possible, because the mov type 105 is not assigned to the delivery inboud category.
    Please note that we did the same thing in another system with the same configuration, without any problems..
    Cheers,
    Ale

  • Restrict Transaction types in menu

    Hi All,
    In CRMD_ORDER transaction, when i select option "Create" from the menu 'Business transaction', it gives me a BIG list of all the standard and custom transaction types for selection.
    Is it possible to restrict this list to limited custom transaction types based on the user authorization. Also i have same requiremnt with Follow up transaction option.
    I guess this should be possible throgh authorization, but not sure how to go about it.
    Any help in this regard would be greatly appreciated.
    Thanks and Regards,
    Imran

    Hi,
    Make use of Authorization object CRM_ORD_PR to restrict transaction types.
    Follow Up Transaction authorization also linked with the same object you can use the following Transaction types for Follow up Transactions.
    0001
    0002
    0003
    0004
    0005
    0010
    0020
    0025
    1001
    1004
    ACCP
    ACPO
    ACTI
    ATCP
    ATPO
    CHM1
    CHM2
    PCAL
    SDCR
    TASK
    TWSQ
    TWTP
    Hope this solves your problem.
    Feel free to revert back.
    -=-Ragu

  • Posting  with clearing transaction

    Hello,
      I wanted to understand what exactly is posting with clearing transaction about ( viz. FB05) , it lists multiple option s on the screen , especially transfer posting with clearing.
    Kindly let me know.
    Thanks in advance.

    Hi,
    For your clear understanding, Please go through the below link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/01/a9bc23455711d182b40000e829fbfe/frameset.htm
    Assign points if useful
    Thanks & Regards,
    Lakshmi Ranga

  • Why use AB doc type with F-04 Post with Clearing Transaction

    I am following a script for the F-04 command and it specifies the doc type as AB in the header?  Why would you use AB in this case?

    Hi Hari Nair Junior,
    It's an accounting document type and this document type is general compared with other document type. But then, u also can use GC document type.
    Hope this will solve your issue.
    TQ
    Regards,
    Nazrul

  • How to restrict transaction type in customized activity pop-up

    We have created a custom workcenter link for search enhancement of activities. We copied the work center link and are calling the same component as in std search but a different customized configuration with added and deleted fields in search criteria. This works fine. Now the requirement is to restrict the 'transaction types' available when we click on the 'new' button in the new custom activity search page. As this pop-up emanates from the std component, it can not be functionally configured (because that would restrict the 'transaction types' while creating new activity in std componnet) but should be technically handled. Please advise.

    Hi Amar,
    Solution here is to let the framework know who is caller ?
    That is, when pop up is opening, you have to put a code in this pop up view to understand who is invoking this pop up , Is it the search page of std. component configuration or is it the custom search page configuration ?
    So have a static attribute in some Z class, you can use your IMPL class also for that matter, Now whenever you know that its custom config i.e. in DO_CONFIG_DETERMINATION, read the role key( i assumed that you have a role key for your custom config)
    and if its custom role key, then set this static parameter say ZCUST_CONFIG = abap_true else abap_false (this is must to reset it using else as this is static attribute )
    Now, in your pop_up view, read this static attribute as XXXX_IMPL=>zcust_config , and if true, then you know that the pop up is invoking from custom config, so do the coding to remove the unwanted transaction types.
    and you are done !!
    Hope it helps you.
    Thanks & Regards,
    SUCHITA

  • POSTING WITH A DOCUMENT TYPE WITH DIFFERENT EXCHANGE RATE TYPES

    Hi there,
    We have different company codes in the same client. These companies are situated in various countries.
    I like to use the same document type with several exchange types M and X(specific for countries). Posting in MM and SD are ok by defining a exchange rate to master records of customers and vendors. Unfortunately I could not find a way to post documents from FI using the same document type.
    Is it possible and how?
    Thank you,
    melike

    Hi,
    In accounting editing options (Transaction code FB00) - in the tab Document entry - there is an option to select the check box Exchange Rate from first line item. If this is selected, the exchange rate entered manually in the first line item will be copied in the header automatically. This could be one of the options you can consider.
    However, the hitch is it involves manual entry which could result in human errors.
    Thanks
    Murali.

  • Posting with MM Movement Type 309 material to material: Error in WM

    Hello,
    i post an MM-Movement type (Bewegungsart) 309 (material to material).
    The MM-goods movement works, but then in warehouse mangagement there is a problem:
    The creation of the transfer order (Transportauftrag) stops in many cases.
    The aim is to post Material A to the same storage bin in Warehouse Management where Material B was before.
    I programmed this in user-exit (ZXLToU03) that by movement type 309, always taking same storage bin. But then I often get the error: transfer order could not be created. Then I have to do the creation of tranfer order in foreground and then I get an error like this:
    capacity of the bin location is not enough.
    The Problem is that I do a posting for example:
    001 010101                   to     922 Umbuchungzone    -->  Transfer order Pos 1
    922 Umbuchungszone  to    001 010101                    --> Transfer order Pos 2.
    And so the first transfer order position is not confirmed when I do the transfer order Pos 2.
    How can I confirm Pos 1 by batch-input? The Programm to do 309 should posting 1000 materials in one step. But in Warehouse management I get those problems?
    Is it possible to increase the capacitiy of the storage bin and then decrease it after creation of transfer order(where can I do this and when)???
    I hope anybody can help me.
    Thanks.

    Hello Kevin,
    I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
    This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
    Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
    A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
    Success and thanks beforehand for any credits!
    Kind regards,
    Bart

  • Post with 561 movement type without affecting MAP

    Hi all,
    I have a scenario for Raw Material with Moving Average Price.
    When posting inventory with movement type 561 we are able to enter the Amount in LC.  I have set the value here as 0.01 but once I post the document the Moving Average Price in MM03 changes with respect to this value.
    I would like to ask is there any way to book stock into inventory without affecting the Moving Average Price.
    Thanks.

    >
    jamison2004 jordan2004 wrote:
    > Hi,
    >
    > Sorry, let me elaborate my requirement.
    >
    > For example :
    > Current Moving Average Price is 1.5
    > Current Inventory Quantity is 1000
    > Current Inventory Value = 1.5 x 1000 = 1500
    >
    > Requirement :
    > Posting excess stock using 561
    > Receipt Quantity : 500
    >
    > After posting, I want the Moving Average Price to remain as 1.5
    >
    > Can you please tell me the solution for this?
    >
    > Thanks
    Do not enter any external value, just post the quantity, and SAP will not change the MAP.
    But of course your stock value will increase by 500 x 1,5
    there is NO WAY to post a quantity of 500 with no value   for a valuated stock managed material and keeping the MAP uneffected.
    if you post with value,  then the MAP keeps constant but your total stock value goes up.
    if you post with zero value, then the MAP goes down.
    OF course you can then change the MAP again with MR21, this will create the next accounting document then.

  • Wrongly Stock issued & difference posting with CENVAT transaction

    Hi all,
    The user has made the wrong entry by issuing more stock for example Qty. 400 in the month April 2007 but he has not verified physically & with system, now after January 2008 he has verified the difference that Physically he has found Qty.1000 but in system Qty. 600. For this I have suggested to go for Physical inventory difference posts that he has found 400 Qty. more since it was wrong entry in April 2007.
    But in this case how to consider the Excise duty transaction since he is posting the difference of 400 Qty. after 6 months.
    Kindly let me know the solution if anybody experienced the same.
    regards,
    Dhanu

    Hi Dhanu,
    There are 2  types of costs involved in procurement.
    1.Material cost(all costs + direct taxes)
    2.Non Material costs(Dedectable Taxes) like Excise.
    So, clearly the company which is going to procured should  pay that Excise amount to that concerned vendor.
    If u find more qty, u can post in Phy.Inv.doc.
    Then where is need of concerning of Excise ..!!!
    Regards

  • You cannot use this transaction type to post to this asset Message no. AA83

    < MODERATOR:  Message locked.  Please post this message in the [Asset Accounting forum|SAP ERP Financials  - Asset Accounting;. >
    Hi,
    I am settling credit values [-ve values] from WBS to Asset Under Constructions Assets during CJ88 period settlement run.
    These assets belongs to Investment Measure. For few assets I am getting below error and
    You cannot use this transaction type to post to this asset
    Message no. AA834
    Diagnosis
    The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
    The asset to which you are posting belongs to class XXXXX (chart of depreciation XXXX). You cannot post to this class using the transaction type you have entered.
    Procedure
    Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
    I know normally we do this way
    During charging
    Dr Exp  A/c WBS name
    Cr B.S A/c
    During settlement
    Cr Exp A/c WBS name
    Dr AuC GL A/c
    But we have situation that during settlement, we are doing reverse
    ie., Cr AuC GL A/c
          Dr Exp A/c WBS Name
    These expenses are through POs and no downpayments. The below error taking me to down payment accounts config but we dont have down payment scenario, can any one advise, thanks
    Regards,
    Sridhar

    Hi,
    Please check the SAP note 1091728 for this.
    Regards

  • You cannot use this transaction type to post to this asset Message no.AA834

    Hi,
    I am settling credit values -ve values from WBS to Asset Under Constructions Assets during CJ88 period settlement run.
    These assets belongs to Investment Measure. For few assets I am getting below error and
    You cannot use this transaction type to post to this asset
    Message no. AA834
    Diagnosis
    The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
    The asset to which you are posting belongs to class XXXXX (chart of depreciation XXXX). You cannot post to this class using the transaction type you have entered.
    Procedure
    Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
    I know normally we do this way
    During charging
    Dr Exp A/c WBS name
    Cr B.S A/c
    During settlement
    Cr Exp A/c WBS name
    Dr AuC GL A/c
    But we have situation that during settlement, we are doing reverse
    ie., Cr AuC GL A/c
    Dr Exp A/c WBS Name
    These expenses are through POs and no downpayments. The below error taking me to down payment accounts config but we dont have down payment scenario, can any one advise, thanks
    Regards,
    Sridhar

    When you have an investment order/WBS create from there the AUC. You collect the cost on the AUC. Final you fill in the settlement rule the final asset in (from a normal asset class) and then you transfer the costs to the final asset.
    In the IO or WBS should be assigened a investment profile and the asset class AUC should be set-up correct
    Search on this forum for more information or read the SAP help

  • Partial divestiture : transaction type

    Dear SDNers,
    I have a simple question concerning the Partial divestiture activity :
    Is it normal that the system doesn't post with "Disposal" transaction type when we have a Partial Divestiture ?
    Is it possible to change this behaviour ?
    Many thanks
    Regards,
    Thibaud

    Hi Dan,
    In fact it was a bug that can be corrected by note 824843 - "Flow types with Equity postings"
    Thanks for your reply
    Regards,
    Thibaud

  • How to test a new transaction type in Asset Accounting?

    Hello everybody,
    I need to explain how to test if the creation of a new transaction type in Asset Accounting was correct.
    In other words, under what condition what should be the expected result.
    The requirement was:
    Create 2 new transaction types in asset accounting in order to book various business transactions:
    -     Create a new transaction type in asset accounting in order to book the credit memo.
    -     Create a new transaction type in asset accounting in order to book the scrapping cost.
    And we make it throught AO73 transaction - Define Transaction Types for Acquisitions u2013 and OAYA transaction - Limit Transaction Types to Depreciation Areas u2013
    Many thanks in advance,
    Alvaro

    Hi Alvaro,
    I think best is you test a posting with the standard transaction typ delivered by SAP first. For example for credit memo in the aqcuisition year the standard tty is 105. If you post with this transaction type you then can check the document and you will see what line items are posted in which way.
    To create your own transaction type:
    You can check the customizing in the standard transaction type and then you could copy it to your own transaction type and give it your own name, and which you may then want to limit to certain depreciation areas via OAYA as you rightly pointed out.
    For retirement by scrapping I would suggest the same: make a posting using the standard delivered transaction types and then check the document to see how the system posts. The make the required admustments in your own created transaction type copied from the standard transaction type.
    I hope this helps,
    Kind regards,
    Brigitte

  • ABZO Posting with T Type 100 By LSMW ( with Dep areas restriction)

    Hi Gurus
    I have few hundreds of Assets that are created before the Activation of New dep Areas. Now i have to updated the Acquisition costs to those 10 and 11 Dep areas only. I am able to do the update the acquisition costs to Asset master by ABZO tcode with restricted T type 100 for 10 and 11 Dep areas manually But i have to do it by LSMW process with BAPI  method,  But ended up in the following error message.
    Posting with transaction type 100 is not possible here, see long text
    Message no. AAPO177
    Diagnosis
    Transaction type 100 has a depreciation area limitation, although posting is not mandatory in all of the depreciation areas entered. However, it is not possible to select depreciation areas in the current transaction.
    Procedure
    Check the specifications for transaction type 100 or use transaction LSMW to enter the transaction.
    Please guide me the procedure to fix this issue.
    Meenakshi.N
    Edited by: Meenakshi.Nakshatrula on Jun 21, 2010 4:35 AM

    ABZO - Tcode,
    100 - Transaction type
    Assets - Non AUC assets
    Mistake is when i am recording the Session i haven't correctly determined the Depreciation areas. That lead me into error message.
    I was able to do it successfully by Batch input recording method instead of BAPI.
    Thanks
    Meenakshi.N

Maybe you are looking for

  • I am no longer able to copy and paste artwork to my songs with the new Itunes to transfer to my Itouch

    I have tried everything and it still wont work, the strange thing is when I got to "Get Info" and click on the "Artwork" tab it's there but it wont transfer over to my Itouch. Is there something else I need to be doing now? It used to do it automatic

  • IPhoto 11 and PS Elements 10 - external editor issue

    My Imac has been upgraded to Mountain Lion, iPhoto 11 and PS Elements 10. Now right-clicking shots in iPhoto browser brings up external editor choice and will then open PSE 10, but not the shot ( I have to drag shot to desktop, open with PSE10, save,

  • Default Camera and the Publish Model

    Hey, i log into a room with the room console. Then i select "Default Camera" in the tab "Streams" and klick on "Configure". Now i choose "Viewer (10)" as "Publish Model" and save with "OK". When i click on "Configure" again the "Publish Model" is set

  • Getting the random password to user email or manager email

    Hi All, when the user is created then the random password generated successfully. Now i want sent the generated password to User Email or Manager Email. For that how can I approch for this. Regards, ADR

  • Account lock error when opmnctl start

    Hi After a longer time I tried to reboot my Portal 10. When running opmnctl startall, the service was hanging and only starting the following: ------------------------------------------------+--------- ias-component | process-type | pid | status ----