Data issue in IDOC

Hi Experts,
I do the following steps to generate IDOC for Passing over payroll data to ADP.
I run the payroll and Run the coombined Payroll export and go to WE05 to chk for idoc.
I have some data issue here. I need the IDOC to Pick 0167 infotype information. For few employees if does generate but for few it does not generate the info in IDOC. Please help me as to how to navigate this problem as iam very new to payroll and as weel as IDOc's.
Thanks
Chowdary

Hello,
Please try your luck with this.
Go to BD87 see the error message why this idoc is not moved. some time retrying will you success.
else also you find the problem in the error message.
thanks

Similar Messages

Posting Data Issue with IDOC Type : COND_A03

Friends,
I'm posting the data from Middleware(Message Broker) to SAP using the IDOC Type : COND_A03 with Message Type : COND_A.
For this IDOC,I'm populating the below Segment's data.
Segement :E1KOMG:
Fields:
KVEWE,KOTABNR,KAPPL ,KSCHL,VAKEY ,KONDA,MATNR .
Segement :E1KONH:
Fields:
KNUMH,DATAB,DATBI
Segement :E1KONP:
Fields:
KSCHL,STFKZ,KSTBM,KSTBW,KRECH ,KBETR,KONWA,KPEIN,KUMZA,KUMNE,MXWRT,GKWRT,ZAEHK_IND ,KBRUE,VALTG,
VALDT,ANZAUF,MIKBAS,MXKBAS,KOMXWRT,KLF_STG,KLF_KAL
Problem: In SAP, IDOC's are processing successfully with status 53 and updating the tables : KONH,KONP successfully.
But Table A957 which is passing against KOTABNR field is not pupulating with the Materials passing.
Can anyone please guide me why the Materials are not populating in the table : A957.
Regards,
Sreeram

Hi,
I guess there might be some issue with VAKEY population.
All the key fields in A957 should be concated properly while populating VAKEY. (Leading zeros must be prefixed to the material)
Regards,
Ganga

Receive data for same IDOC from 2 different scenarios

Hello,
I have already scenario that received xml file and transfer data to IDOC (The IDOC is purchase order).
This scenario works fine.
Now I try to add more scenarios. This scenario takes files from other xml source work with new mapping and transfer data to same IDOC.
The problem is in integration builder u2013
When I try to create receiver agreement the message the message "Object already exists" appear.
How can I solve this issue?
Elad

Hi Elad,
+Now I try to add more scenarios. This scenario takes files from other xml source work with new mapping and transfer data to same IDOC.
The problem is in integration builder u2013
When I try to create receiver agreement the message the message "Object already exists" appear.+
Does this mean that the other xml source is from the same party? If yes, then that party is already configured in your receiver agreement as explained by the error "Object already exists".
If the xml source is from a different party. What you can do is to delete the existing receiver determination. Make a new one and replace the party with an "*", in that way, increasing the parties would only consist of one receiver determination for that particular interface. You would only have to add sender and receiver agreements.
Hope this helps,

ECC6.0 upgrade issue with IDoc release

Hi experts,
we are in the process of upgrading our ECC environment from 5.0 to 6.0. We have quite a few interfaces which use ORDERS/Invoice Idocs in customised form. In ECC5.0 environment, we had developed a Z segment in the ORDERS Idoc and the segment release was set as 640. Everything worked fine in ECC5.0.
In upgraded environment, SAP has released new version of some segments. one of those is E1EDP01. This segment has 2 new versions in ECC6.0 environment - 007 and 008. This change in the version changes the data in the IDoc and hence interface goes in error at the EDI provider.
We have tried to use 640 as the IDoc segment release in the partner profile of the IDocs. This still gives us an issue because the 007 version of the segment E1EDP01 has release 620 and hence the Idoc picks up 007 version instead of 006 version as desired. When we change the partner profile with Segment release in the IDoc type as 46C, it gives us an issue in the Z segment saying that the IDoc segment is not released in 46C and the Idoc goes in error.
has any one faces such situation in the past? if yes, please throw some light.
Thanks in advance.

Hello,
Iam new to SAP. Thars why i cant understand well to do upgrade,
Then i found out some notes from internet about Upgrade : SAP Note Number 857904 (upgrade from Release 6. To 7.0).
In that notes,
Actually i would like to know about some key words (for example : ASSIGNING, REPLACE, TRANSFER. ) which how to work in the Release 7.0
Always i have some objets in 4.6C.
Ex 01: READ DATASET p_dataset INTO wa_record
Ex 02 : TRANSFER i_crhu TO p_crhd
LOOP AT i_crhd.
*disable controls in crhd
    PERFORM f_disable_crhd.
    TRANSFER i_crhd TO p_crhd.
    IF sy-subrc NE 0.
      MESSAGE a045.        "Error when transfering data to error file
    ENDIF.
ENDLOOP.
CLEAR i_crhd.
CLOSE DATASET p_crhd.
IF sy-subrc NE 0.
    MESSAGE a039.                      "Error at close dataset
ENDIF.
OPEN DATASET v_crhd FOR OUTPUT IN TEXT MODE.
And then i have some FM (ex : WS_UPLOAD , WS_DOWNLOAD)
So I have changed the code for WS_UPLOAD by GUI_UPLOAD
                              and WS_DOWNLOAD by GUI_DOWNLOAD
now my problem is to know about some key word which how to work in ECC6 (for example ASSIGNING, REPLACE, TRANSFER. )
thanks in advance
Rathy

Add new bank account in master data client with idoc DEBMAS.

Hi friends,
I have an issue.
I am trying to add new bank account in master data client with idoc DEBMAS.
But when I submit, then just overwrite the bank data but not add.
I try playing with MSGFN code with value '009' or '004' but nothing done.
Someone has met this issue ?
Thanks for your answers.

Thanks,
But what do you mean ? where can I find this path , in img ?
Fields->Set Qualified Update ->Append Option
I think we have to use another idoc :
BUPA_C_BANKDETAIL_ADD01 SAP BP, BAPI: Add Bank Details
I'll try...

The meta data for the IDoc type "LOIPRO01" is unavailable

Hello,
i'm trying to send idocs via rfc from SAP ERP ECC 6.0 to SAP MII 12.06, but we always get errors like:
The meta data for the IDOC type LOIPRO01 is unavailable
I've checked the parameters on MII side of the IDOC Listener:
Servername MII_JCI33
server Properties
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
progid MII_JCI33
trace 1
params
snc_myname
snc_qop
snc_lib
unicode 1
max_startup_delay
Client Properties
client 303
user RFC-I33
alias_user
passwd
lang en
sysnr 02
ashost h33-i0.rz.k-plus-s.net
mshost H33-I0.rz.k-plus-s.net
gwhost H33-I0.rz.k-plus-s.net
gwserv sapgw02
r3name H33
group
tpname MII_JCI33
tphost H33-I0.rz.k-plus-s.net
type 3
trace 1
codepage 1
There is no saprouter between ERP and MII as in the thread from Christoph Mertins in November 2008. The user rfc-i33 on the ERP has SAP_ALL permissions.
Has anyone an idea ?
Kind Regards,
Thomas Strecker

Thomas,
There is a link for a basic IDoc installation that may help.
[IDocListener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
One other issue that has occurred to cause problems is registering the program in Visual Administrator. If you registered the ProgID in Visual Administrator, there will now be two ProgIDs registered (MII does self registration with the RFC Destination upon starting the server). Delete the registration in VA, if you did it.
If there are other error messages available, please post them.
Good luck,
Mike
I also just remembered, if you have two ProgIDs that are the same, running on two separate MII instances, you may run into a problem. Not sure it will have the same symptoms or error messages, but something else to check with (especially when migrating from dev to prod).
Edited by: Michael Appleby on Feb 10, 2009 5:02 PM

The meta data for the IDoc type "MATMAS05" is unavailable

Dear Gurus:
I need help in completing small test that I am doing to send MATMAS IDOC to xMII.
I have done:
1.     RFC connection SM69 and tested ok
2.             xMII IDOC Listner config with my SAP client
3.     Connection appears in smgw ok (in logon client screen)
4.     Completed Distribution channel and we20,we21
All above looks in place when I send one IDOC (BD10) it remains in 03 even after I run RBDMOIND. Besides IDOC is not appearing in C:\Lighthammer\JCO\Output.
On tRFC I see error The meta data for the IDoc type "MATMAS05" is unavailable.
Note that
a) I am NOT using transaction on routing tab
b) xMII version 11.5
c) I used "How to send IDOC ...." Version 2 PDF that is available on web (thanks to Bimal)
d) I looked at other two posts which has to do with LOIPRO message type and with JCO issue
Please help.
Thanks
Jay

Jay,
What version of ERP are you using, perhaps this note will help: 770239
Also the SAP Help has some suggestions as well...<a href="http://help.sap.com/saphelp_nw04/helpdata/en/8a/b8b13bb3ace769e10000000a11402f/content.htm">Click Here</a>
-Sam
null

Data Issue

Hi All ..
           We are facing one data issue DSO. One record is worngly loaded with some project iD ( Ex record is having ID GE1234 insted of having LE4423) remaining details are same . we are loading the data furtherly to master data table from the DSO. if i try for reporting for project id LE4423 ,information not avilable because it is heaving wrong ID,it is key also.But in the Source system (CFG) side Data is correct with ID LE4423.
         In update rule we are following one to one mapping for all infoobjects.My requirement is i need to have in my DSo LE4423 . I need to overwrite the record id GE1234 with LE4423 without affecting other fields in the record.
        Shall i load till PSA with the ID LE4423 ..then if load this single record to DSO will overwrite the GE1234 by choosing other field as key field. but we are following one to one mapping in update rule.
Please help me on this. i need to hev a correct id for record.
Thanks ,
Prem.

You can use selective deletion to delete the record with Project ID = GE1234
Load the data till PSA
Load the data to DSO using selection Project ID = LE4423 in DTP from PSA.
check in further data targets also for mismatch of data
Hope it helps,
Naveen Vytla
Edited by: Naveen Vytla on Nov 18, 2008 10:49 AM

Custom report -Mb51 -EBELN,AUFNR,KDAUF & KUNNR -Data issues

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Consistent Data Issues Even After Replacement

I don't know whether to blame the phone or the ice cream sandwich update for all the problems I have been having with my RAZR. When I first got it six months ago it was great and I loved it now after the ice cream sandwich update I dont really like it anymore. I never had any sort of issues while using it on gingerbread. Today, I have seen my phone switch constantly between 3g and 4g more times than I can count over the course of half an hour. I couldn't even get a consistent signal to watch a 3 minute youtube clip.
First off, I updated it to ICS but first wiped the phone clean including cache, etc. So it would have basically been a clean install. Now, I have certain issues. The 4g and 3g switch is terrible. On the street and in my own house I have had the same thing happen. In my house I get anywhere from 3-5 bars of 4g but it still switches over to 4 bars of 3g. I have even seen it switch from 4g to 3g when I had full bars. I have already replaced the sim cards, but I am still having these issues. It's actually happening on all 4 of my RAZRs on my family plan. I have gone through the network resets where I pull out the sim card and for 30 seconds, insert it, power on the phone, etc. I went through all 4 of them with the Rep over the phone. I have also had several instances where I did not have data but signal bars and then I didn't have absolutely anything at all. I live in a "major" city metro area, Boston, and I can't believe I am having these problems.
At first I would have gone off and blamed Verizon, but it is definitely not Verizon, it is our phones that are terrible. I can confirm this because my brother uses an ipad (4g Verizon) on a separate account and he consistently maintains 4g even though I have seen it go as low as two bars. Yes, I understand the ipad is a different device and may have a different radio, but that is exactly how our phones used to work on gingerbread. I received a replacement device and I am still having the same issues. Also, the headset speaker, not the speaker on the back, or receiver is really tinny during phone calls even with the in call volume down half way. It is really annoying and the little tone that plays after hanging up makes the speaker sound like its about to blow out. I don't know what to do if the RAZR will keep having data issues because this is absolutely ridiculous. I know i'm not entitled to anything but for $310 a month I mean come on, I just want my phone to work properly. As I am typing this now, I have witnessed my phone switch between 4g, 3g, and no signal at least 5 times and of course my brother's iPad on Verizon has kept its 4g signal.

Thanks for all the suggestions, but they just don't work at all guys. I've even tried that restore connectivity app from Motorola, but of course it didn't work. I don't like that I keep having constant switches between 3g,4g, and no signal bars. It's awful thats just what it is. I feel like I got gipped with this update promising better user experience. If the darned thing can't connect to their network, then what is Verizon doing to address these issues? Every time I try to do something "data intensive" (i.e. youtube, facebook, twitter, etc) the data signal just drops and I'm either left with gray bars and no data or no signal bars whatsoever. Also one thing that annoys me to death with this phone is that I have it sitting in my pocket after I lock the screen and I go to pull it out of my otherwise empty pocket. The screen is turned on by itself (I have the clear silicon case on it so the power button shouldn't be pressed by itself and no I don't wear skinny jeans), its got 3g and no bars, and its piping hot.
WHAT IS WRONG WITH THIS PHONE VERIZON???!!!

Master data Issue --- materials have unassigned or # values ...!!

Hello Experts,
I am facing an issue that the Customer Data is missing in a BEx Report.
Data Flow is 2LIS_13_VDITM --> DSO1 --> Merging DSO --> Cube --> Multiprovider --> Bex Report.
Exact issue is Customers in the Bex Report has unassigned to Sales Office, Sales Group, Sales District.
The only reason a customer should show up under u201Cunassignedu201D or u201C#u201D is if itu2019s improperly set up in the system.
customers are assigned with two values. one which has data and the other which has unassigned value.
I wanted to know, how do i check if the matierials are valid to have unassigned Values ?
Checked the Merging DSO and saw that there are actually values assigned values for the affected matierials.
After that checked the Cube data values are displayed except the Master Data values.
I guess..its completely related to Master data. I would like to know how can i resolve this issue.
Please reply me if you face this kind of master data issue in your expeiriance.
Thanks,
SN.

Hi,
Are Sales Office, Sales Group, Sales District are attributes of Customer?
In case they are, then the customers will be unassigned to Sales Office, Sales Group, Sales District in case the data for these attributes is loaded to the customer attributes.
and also check if the customer characteristic is properly assigned in the multiprovider.
Check if it helps.
Regards,
Joe

OBIEE 11g .0d date issue

Hi,
I create an initialization block to populate a couple of repository variables.
After saving the RDP the value for the default initializer changes from 2011 to 2011.0d
I have been using several workaround. But I need some permanent fix in rpd itself. Can anyone point to some Oracle Document? Is this issue been resolved in latest release of OBIEE. I am using 11.1.1.6.6.
Workaround Ref : The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type

Have you gone through my suggestions at the below links?
The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type
You have to do it where ever you are using that rep. variable not in the init block.

Verizon mades changes in the coding and now Windows Phone 7 is having data issues!!!

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

How to find out the table, data for the IDOCS is pulled from?

HI
The ZFPH9999397 VENDOR FEED job runs the RBDMIDOC program with the variant Z9999_397. This creates IDOCS that are sent out and eventually wind up in IMOS.
The IDOC Type is CREMAS.
Can you tell me which table or tables the data for these IDOCS is pulled from?
Or tell me the procedure to find out the table name.
Thanks,
das.
Edited by: sathish dasari on Dec 10, 2009 11:54 AM

You can use Transp. Table      TBD62 .
enter Message Type                      CREMAS
you will get the list of tables and the fields from which data is pulled based on the change pointers in Transp. Table      BDCP.

Mapping issue in idoc to JDBC scenario

mapping issue in idoc to JDBC scenario
source structure
E1KNB1M
BUKRS = 1000
E1KNB1M
BUKRS= 9000
E1KNB1M
BUKRS= 2000
THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
TARGET field : ISFRANCHISE
if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
if BUKRS = 9000   THEN ISFRANCHISE= Y
               ELSE
            ISFRANCHISE=N
I've done the mapping as below
BUKRS = 9000--> IF THEN Y ELSE N--
> ISFRANCHISE
BUT everry time the target value is N only
pl suggest
rgds
mojib

mapped like this
BUKRS--->SORT---->
                                             EQUALS --------IF---THEN    Y
9000------------------------>                                               ----------------->ISFRANCHISE
                                                              ELSE   N
context of BUKRS set to parent node
its worked
thanks to all for valuable suggestions
rgds
mojib

Data issue in IDOC

Similar Messages

Maybe you are looking for