Data load error regarding timestamp

Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
Rupa

Hi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia

Similar Messages

Data Loading Error : ToomanyError records.

Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthy

hi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh

Common data load errors in BI 7

Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..

Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank

Sap bw 7.3 master data load error

sap bw 7.3 master data load error
erroe: Exception in Substep Rules

Hi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan

Data load error--urgent

hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddartha

Hi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

What are the frequent data load errors in production support?

what are the frequent data load errors in production support?

It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri

Data Load error Please respond ASAP

Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
Thanks

Key here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J

Material Master Data Loading Error

Hi All,
I am loading master data for material. i got the following error.
1. 0material_attr :
    Record 1 :0MATERIAL : Data record 1 ('000000000000010220 '): Version '000000000000010220 ' is not   valid
    Process :   If this message appears during a data load, maintain the attribute in
                     the PSA maintenance screens. If this message appears in the master data
                     maintenance screens, leave the transaction and call it again. This
2.0material_text : Data record 1 ('000000000000010220E '): Version '000000000000010220 ' is not valid
   Process : Same as above.
I have applied RSKC tcode in BI with ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX, and one special character string. but still getting the same error.
Regards,
Komik Shah

Hi All,
Thanks for the reply. i have solved most of errors. but there are some errors like this
Diagnosis
    Data record 261 & with the key '000000000000132559 &' is invalid in
    value '10x8x5 &' of the attribute/characteristic 0SIZE_DIM &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This allows to maintain your masterdata
which string i should have to add in RSKC to remove this error ? i have already added the ALL_CAPITAL, ALL_CAPITAL_PLUS_HEX.
I have assigned points.
Regards,
Komik Shah

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Master Data Loading Error

Hi,
While loading the master data from R/3 below error message getting.
Error Message:DUMP:ABAP/4 Processor:ASSIGN_TYPE_CONFLICT.
Thanks,
Jayapal.

hi,
Check..
/thread/261418 [original link is broken]
Data Load Short Dump (ABAP/4 processor: ASSIGN_TYPE_CONFLICT)
Also, Check..
OSS note 971584 - ASSIGN_TYPE_CONFLICT in the DTP program
Regards
Lavanya

Data load error in PSA

hellow gurus
i have run the data load for 2lis_02_scl at psa level..
but when i went to RSMO
i m seein
Transfer ( Idoc and TRFC) : error occured
Reuest IDoc : application documented posted
Info Idoc1: Sent not arrived ,Data Passed to port Ok
how to resolve this error
thanks
points wil be assigned as my gesture
Regards
Rahul

Hi,
Check SM58 and BD87 for pending tRFCs/IDOCS and execute them manually.
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
IDOCS Process Manually
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/content.htm
&messageID=2311994
Thanks,
JituK

ERPI data load error

Hello,
We are loading one month data from peoplesoft to planning application using ERPI 11.1.2.1. It takes about 1 hrs to load one month data.Is it normal? When looking at ODI PS_GL_LOAD_BALANCES_DATA is always successful but COMM_LOAD_BALANCES fails at the end with this error.Did anyone have this error before. Message in HyS9aifWeb-sysout file is:
FROM AIF_HS_BALANCES
WHERE LOADID = 132
[EssbaseRuleFile] Locking rules file AIFData
[EssbaseRuleFile] Successfully locked rules file AIFData
[EssbaseRuleFile] Copying rules file OWBPLAND for data load as AIFData
[EssbaseRuleFile] Unlocking rules file AIFData
[EssbaseRuleFile] Successfully unlocked rules file AIFData
[EssbaseRuleFile] The data rules file has been created successfully.
[EssbaseRuleFile] Locking rules file AIFData
[EssbaseRuleFile] Successfully locked rules file AIFData
[EssbaseRuleFile] Load data into the cube by launching rules file...
<Mar 1, 2012 1:09:30 PM PST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "625" seconds working on the request "weblogic.servlet.internal.ServletRequestImpl@3bc2189[
POST /aif/services/HPLService HTTP/1.1
Content-type: text/xml;charset="utf-8"
Accept: text/xml, multipart/related, text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Soapaction: "http://DEVAPPHPN001.indymacdev.biz:19000/aif/services/HPLServiceexecuteDataLoad"
User-Agent: JAX-WS RI 2.1.7-b01-
Content-Length: 638
Connection: Keep-Alive
Proxy-Client-IP: 10.205.101.108
X-Forwarded-For: 10.205.101.108
X-WebLogic-KeepAliveSecs: 30
X-WebLogic-Force-JVMID: 2124105652
]", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-176 "[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, suspended, priority=1, DAEMON> {
jrockit.net.SocketNativeIO.readBytesPinned(SocketNativeIO.java:???)
jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:24)
java.net.SocketInputStream.socketRead0(SocketInputStream.java:???)
java.net.SocketInputStream.read(SocketInputStream.java:107)
com.essbase.services.olap.main.main_direct.EssNetClient.readFrom(Unknown Source)
com.essbase.services.olap.main.main_direct.EssNetClient.readPackage(Unknown Source)
com.essbase.services.olap.main.main_direct.EssNetClient.receiveResponse2(Unknown Source)
com.essbase.services.olap.main.main_direct.EssNetClient.adNetReceiveResponse(Unknown Source)
com.essbase.services.olap.main.main_direct.EssAPIData._adImport(Unknown Source)
com.essbase.services.olap.main.main_direct.EssAPIData.ImportToEssbaseASO(Unknown Source)
com.essbase.services.olap.main.main_direct.EssMAPIDir.BeginDataload(Unknown Source)
com.essbase.server.framework.EssOlapMainService.BeginDataload(Unknown Source)
com.essbase.server.framework.EssOrbPluginDirect.essMainBeginDataload(Unknown Source)
com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
com.essbase.api.session.EssOrbPlugin.essMainBeginDataload(Unknown Source)
com.essbase.api.datasource.EssCube.beginDataload(Unknown Source)
com.hyperion.aif.essbase.EssbaseRuleFile.executeDataRuleFile(EssbaseRuleFile.java:314)
com.hyperion.aif.webservices.HPLService.executeDataLoad(HPLService.java:167)
sun.reflect.GeneratedMethodAccessor7310.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:575)
org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:71)
org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:265)
org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:113)
org.apache.axis.SimpleChain.invoke(SimpleChain.java:78)
org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:435)
org.apache.axis.server.AxisServer.invoke(AxisServer.java:132)
org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:586)
javax.servlet.http.HttpServlet.service(HttpServlet.java:700)
org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:325)
javax.servlet.http.HttpServlet.service(HttpServlet.java:815)
weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:224)
weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:108)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:206)
weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:299)
oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:405)
oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:98)
oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:86)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:25)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3687)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:308)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:116)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2213)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2135)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1420)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
weblogic.work.ExecuteThread.run(ExecuteThread.java:168)
Any feedback is appreciated.Thank you for taking ime to read through.
Regards.

Hello,
Part of the message you are getting is because the WebLogic process is a bit intuitive. It knows when something is running and waits. It also assumes anything running for a certain period of time is considered "stalled/stuck" and reports it. The time it waits is dependant on the Weblogic configuration.
As for the time it takes to load data... that is very vague. Without knowing more about your environment that is very hard to state. We know nothing about the hardware, platform, dataset size, etc. You would need to review ODI to find out what is taking the long amount of time and try and replicate it outside of ERPi/ODI to see if you get the same results.
Thank you,

CX_RSR_X_MESSAGE Data load error in Quality system

Hi
We are on BI.7 and trying to load Technical content data for first time in Quality system .
We get the following error :
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSR_X_MESSAGE
for all the technical content data load.
The other data loads are working fine in the quality system.
We searched a lot on the forum and got various solutions like try out note 615389, 963760 etc.. But none of them are working fine for us.
Please suggest.
Thanks you for your help.
Gaurav

Hi
The error log is as follows -
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_RSR_X_MESSAGE
Date and Time          23.01.2009 10:06:08
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
      along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program 'SAPLRRMS' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    No text available for this exception
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
    "SAPLRRMS" or "LRRMSU13"
    "RRMS_X_MESSAGE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
It gives a error in the last step of executing infopackage wherein the data is to be updated to the infocube.
I checked with Basis team. There is no tablespace problem as well.
Regards
Gaurav

0MATERIAL master data loading error - version not valid

Hi all,
When i am trying to load 0material master data , i get the following error :
0MATERIAL:Data record 1 ('000000000000100001 '): Version '000000000000100001 ' is not valid RSDMD 194
System diagnosis :
Data record 1 & with key '000000000000100001 &' is invalid in value '000000000000100001 &' of the attribute or characteristic 0material &.
System response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.
Please help me solve this problem. Will assign points.
Thanks & Regards,

Hi Stefen,
Thanks a lot for your input.. It has solved my problem as well.
10 points from me
Thanks a lot.
Regards
Dolly

Data load error regarding timestamp

Similar Messages

Maybe you are looking for