Data Manager lock

Could someone tell me what message you get when you attempt to run a package on locked data.
I am testing data locking. It works fine when i try to submit data through an input schedule. But for some reason I am able to run a DM package on locked data. I verified that the status is "Data approved and locked"
thanks!!

Thanks guys.
I tested some more packages. The FX Restatement, Clear and ICEliminations packages all run despite the data lock. The Import is the only one that functions correctly on this matter.
See script from FX Restatement. What should i adjust.
'DEBUG(ON) PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when running logic.",1,{"Yes, check for work status settings before running logic","No, do not check work status settings"},{"1","0"}) PROMPT(SELECTINPUT,,,"Please select category, entity and time for restatement","%CATEGORY_DIM%%ENTITY_DIM%%TIME_DIM%") TASK(Execute formulas,USER,%USER%) TASK(Execute formulas,APPSET,%APPSET%) TASK(Execute formulas,APP,%APP%) TASK(Execute formulas,SELECTION,%SELECTIONFILE%) TASK(Execute formulas,LOGICFILE,%APPPATH%\..\AdminApp\%APP%\FXTrans.lgx) TASK(Execute formulas,RUNMODE,1) TASK(Execute formulas,LOGICMODE,1) TASK(Execute formulas,CHECKLCK,%CHECKLCK%)

Similar Messages

Data Manager Locking

Data manager is getting locked up every time we switch from taxonomy mode to record mode? has anyone else experience this issue?

Hello Gootz11
SAP MDM efficiency dependent of many different factors.
Previously you sould reading "Sizing guide" - it can help you improve efficiency your SAP MDM Server
But in practice: delays is standart Data Manager behaviour when in SAP MDM work a lot of user some time.
You can create OSS note for SAP about its issue
Regards
Kanstantsin Chernichenka

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

Data manager package records being rejected and showing following reason.

The current members are locked::(N'ACTUAL', N'2012.JAN')(ACTUAL, 2012.JAN)
The member name is invalid::CC.3012 in ENTITY Dimension ,CC.3018 in ENTITY Dimension ,800002 in ACCOUNT Dimension ,802020 in ACCOUNT Dimension ,811001 in ACCOUNT Dimension ,811016 in ACCOUNT Dimension ,811036 in ACCOUNT Dimension ,811037 in ACCOUNT Dimension ,811040 in ACCOUNT Dimension ,827101 in ACCOUNT Dimension ,827102 in ACCOUNT Dimension ,CC.8851 in ENTITY Dimension ,CC.8852 in ENTITY Dimension ,879155 in ACCOUNT Dimension ,879160 in ACCOUNT Dimension ,879165 in ACCOUNT Dimension ,879175 in ACCOUNT Dimension ,,S614229 in ACCOUNT Dimension ,S614230 in ACCOUNT Dimension...
This is the error we getting,when we try to run the package in data manager ,and no work status locks defined at all.
please let us know the solution as on high priority.
Thanks in advance

Hi Praveen,
In case if u find that the package is not getting aborted, there is another way to kill the process.
1) connect to the SQL Server using SQL Server Management Studio
2) Right Click on the name of the server->Activity monitor
3) Open the section Processes and then filter the column DataBase for the appropriate DB and in the the column Commands, select not blank
4) Now you should have in the list all the running processes on that database. Among these you have to find the right one to kill. Keep in mind the session ID associated to the process. To be sure that this is the right process to kill right click the process row->Details, to make sure you are looking at the the right process.
NOTE : This is critical step and u need to make sure that u don't kill any other processes.
5) Close the previous windows the right click again on the process row identified by the session id previously noted->click kill process.
6) Process the cube from Analysis Services.

Work status Data Manager

Hello!
We can run a package from Data Manager on periods that have the status of "Locked"
We have a package with the following script:
'DEBUG(ON)
PROMPT(SELECTINPUT,,,"Please select category, entity and time for restatement","%CATEGORY_DIM%%TIME_DIM%%CURRENCY_DIM%")
TASK(Execute formulas,USER,%USER%)
TASK(Execute formulas,APPSET,%APPSET%)
TASK(Execute formulas,APP,%APP%)
TASK(Execute formulas,SELECTION,%SELECTIONFILE%)
TASK(Execute formulas,LOGICFILE,%APPPATH%\..\AdminApp\%APP%\FXCONSOL_Restatement.lgx)
TASK(Execute formulas,RUNMODE,1)
TASK(Execute formulas,LOGICMODE,1)
TASK(Execute formulas,CHECKLCK,1)
The logic used are as follows:
*INCLUDE SYSTEM_CONSTANTS.LGL
//Kr omflyttning av obeskattade reserver
*INCLUDE ObeskRes.lgf
// Kr berkningar av elimineringar och konsolidering
*RUN_STORED_PROCEDURE = SPRUNCONSO('%APP%', [%KATEGORI_SET%], [%GRUPP_SET%],'%SCOPETABLE%','%LOGTABLE%')
*COMMIT
*INCLUDE Calculations_H2.LGF
If we use this package in Data Manager for a period which has the status of "Locked" the package will run. Should not this be stopped because we have the status of "Locked" on the period and the script says that it will check Work Status

Hi Daniel,
'Normal' logic should listen to the 'locked' settings. Please double check the workstatus settings to see if DM=locked is correct for the 'locked' workstatus.
BUT:
The businessrules stored procedures do not listen to these settings. Most SP calls have there own locking methods.
For example the SPRUNCONVERSION call is as follow:
*RUN_STORED_PROCEDURE=SPRUNCONVERSION(u2018APPLICATIONu2019,u2019CATEGORY_SET%u2019,
u2019%CURRENCY_SET%u2019,u2019GLOBALu2019,u2019%SCOPETABLE%u2019,u2019%LOGTABLE%u2019,impact,destination,
ratedimension,maxstatus)
The maxstatus setting here is the maximum status which allows change of data.
The one exception here is SPRUNCONSO which can not be prevented from running and storing data.
Normally this is good behaviour;
SPRUNCONSO doesn't change LC data and shouldn't therefore not calculate other numbers than the previous run.
The behaviour of other sp's could/must sometimes be different then normal datamanager packages; for example when the status is submitted, users should not be able to upload/clear data, but should be able to run conversion and consolidations, that is why the sp's have there own locking section in the call itself.
Alwin

Search for [Remote Key] and [Remote System] in Data Manager

Hello all
I would like to be able to search on the remote key and the remote system in the MDM Data Manager is that not possible? I thought I remembered seeing that possibility under the Free-Form Search but now I can't find it.
I have, however, found this in the Data Manager reference guide:
REMOTE SYSTEM AND REMOTE KEY FIELDS
MDM uses the remote systems defined in the Remote Systems table
within the MDM Console to store and maintain key mapping information
for each record or text attribute. It does this using a virtual key
mapping field that you never see in the MDM Client.
This virtual key mapping field is very much like a qualified lookup field
into a virtual key mapping qualified lookup table.
Key Mapping information stored in virtual lookup field
The Remote System and Remote Key fields are normally not visible;
however, they do appear in several places in the MDM Client.
Specifically, both fields: (1) appear in the File > Export dialogs in Record
mode for exporting value pairs; (2) are recognized by the File > Import
dialog in Record mode for importing value pairs; and (3) appear in the
Edit Key Mappings dialogs in both Record mode and Taxonomy mode,
for viewing and editing value pairs.
Is there any way to search on the value in the remote key from the Data Manager?

Not sure search i think not possible.
But you can see keys as mentioned:
Enable Key mapping in Console.
MDM Client maens MDM Data Manager.
They do appear in several places in the MDM Client or Data Manager. Three different methods to see in DM are given already below:
Specifically, both fields: (1) appear in the File > Export dialogs in Record mode for exporting value pairs; (2) are recognized by the File > Import dialog in Record mode for importing value pairs; and (3) appear in the Edit Key Mappings dialogs in both Record mode and Taxonomy mode, for viewing and editing value pairs.
BR,
Alok

Error while opening MDM Data Manager

Hi,
We are getting the following error while trying to open Data manager on our repository.
"Error Initializing Attributes for table Taxonomy
Application will exit
Already exists"
mds Version 5.5.42.90
MDM DataManager Ver5.5.42.90
The repository loads without any errors. The server log file too doesnt show any errors.
Is there anyway to fix this?

Go to your MDM console, Login to repository and Unload repository first.
Then load with Update Indices.
This problem comes when you change anything in schema in console and then load repository with immediate option.
So always prefer to use update indices as accelator files will get updated and data comes from actual database.
If the problem still persists then Go again to console and check your repository for any fatal error. if errors come then repair repository and if not come then also repair.
Then load with update indices.
Hope it will help you.
BR,
Alok
Edited by: Alok Sharma on Feb 14, 2008 9:20 AM

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Unable to refresh SQL Server data source through Data Management Gateway

I just installed the version 1.1.5226.8 of Data Management Gateway and tried to refresh a simple query on a table connected to SQL Server, with no transformations in Power Query.
This is the error I obtain:
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: transfer service job status is invalid.
I am wondering whether my Power BI is still not updated to handle such a connection type, or there could be something else not working?
I correctly created the data source in admin panel following instructions in Release Notes, and
test Power Query connection is ok.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

I made other tests and I found important information (maybe there is a bug, but read the following).
The functions DateTime.LocalNow and DateTime.FixedLocalNow
work correctly, generating these statements to SQL Server:
    convert(datetime2, '2014-05-03 06:37:52.1135108') as [LocalNow],
    convert(datetime2, '2014-05-03 06:37:52.0525061') as [FixedLocalNow],
The functions DateTimeZone.FixedLocalNow, DateTimeZone.FixedUtcNow,
DateTimeZone.LocalNow, and DateTimeZone.UtcNow
stop the scheduled refresh with the error I mentioned
in my previous messages, generating these statements to SQL Server:
    '2014-05-03 06:37:52.0525061+02:00' as [TZFixedLocalNow],
    '2014-05-03 04:37:52.0525061+00:00' as [TZFixedUtcNow],
    '2014-05-03 06:37:52.1135108+02:00' as [TZLocalNow],
    '2014-05-03 04:37:52.1135108+00:00' as [TZUtcNow]
I solved the issue by placing the DateTimeZone calls after a Table.Buffer call, so query folding does not translate in SQL these functions. However, it seems like something to fix.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

Change of sign when running the data management package

Hi All,
I have written a script logic for copying my Budget member under category dimension to say another member say "XYZ" under category dimension and this is for my Member Sales under ACcount dimension having acctype as inc.
When i run the logic thru default i am getting the correct value. however if i run the same thru data manager package- my sign changes.
Eg. 100000 is copied as -100000 and -50000 is copied as 50000.
Please help me out
Regards
Navin

Hi Navin,
CREDITPOSITIVE= YES | NO
Default: YES
If No, all amounts referring to an ACCOUNT type (LEQ, INC) will have their signs reversed.
Since you are referring to the member account sales as INC the default logic considers the sign as reversed.
Please look at this link which helps you to understand
Significance of Account Type EXP,LEQ,INC,AST in BPC- Need some valid reason
Hope this helps.
Regards,
Sanjeev

Power Query/Data Management Gateway data refresh not working

Pretty new to o365/Power BI, but here's what I've got going on (hopefully someone can help me out):
I created a data management gateway and data source. The data source says it's online in the PowerBI admin center, and it seems to be working correctly. I can open Excel 2013 on my desktop (logging in as my trial o365 account which has Power
BI associated with it) and connect to the data source via Power Query using the oData option. I make sure to import the data into the model, and then open up the PowerPivot window and create a simple pivot table using the data in the model.
that all works just great. The problem comes when I upload the workbook and try to update it. I've tried a few different ways.
1. When I try to manually refresh the workbook by opening it in my o365 site and going to data-->refresh I get the following error:
      An error occurred while working on the Data Model in the workbook. Please try again.
      We were unable to refresh one or more data connections in this workbook.
      The following connections failed to refresh:
      Connection: Power Query - dbo_DimProductCategory
      Error: Out of line object 'DataSource', referring to ID(s) 'a75593f3-c34d-4f83-9458-49aa2cece164', has been specified but has not been used.
      The following system error occurred: Class not registered
      The provider 'Microsoft.Mashup.OleDb.1' is not registered.
      Power Query - dbo_DimProductCategory
2. When I go into Power BI and go to "Schedule Data Refresh" for the workbook, I get the following error:
      Sorry, the data connections in this report arenâ€™t supported for Scheduled Refresh.
      Technical Details â–¼
      Correlation ID: B3CE4B10-2137-E593-6FCF-189B73465190
      Date and Time: 03/31/2014 06:20:39 PM (UTC)
Any help would be greatly appreciated. If you need additional information, I'd be happy to provide it.

Hey Guy,
Thanks for the reply.
The "data source type" of the data source in Power BI is "SQL Server" (there was only that and Oracle available to select from)
The "data source type" that Power Query is using in Excel is "From oData Feed"....which is using the Power BI data source....which is using the data management gateway.
A few follow up questions if you have a second
1. Do you know when PowerQuery data refresh will be supported? (just a general idea....weeks, months, next year?)
2. Is there any other way to connect to (and be able to refresh) PowerBI data sources referencing "on prem" data via the data management gateway? I tried using the oData feed URL in non-PowerQuery areas of excel (excel data tab, PowerPivot directly)
but it didn't work. If there's some other way to connect to and refresh on prem data, i'm all ears :D
Really appreciate your help, thanks for taking the time.

Cannot Delete Articles from Data manager..

Hi Guru's,
WHile delting record s from Data Manager I am getting Error
" Insufficient disk space available on DBMS" and as a result i cannot delete reocrds..
What could be the issue?
Please let me know if ican take help of our Basisi admin team .. Or Is there anything that i can work out in MDM..
Regards,
Vikrant M Kelkar..

Hi everyone,
Got it .. It was isseu because the table space was full and it ddnt allow me to further delete articles..
Increased Table space and its ALl Good now..
Thanks all ( whoen=ver reads this thread)
Regards
Vikrant M Kelkar

Is there a Java utility class to help with data management in a desktop UI?

Is there a Java utility class to help with data management in a desktop UI?
I am writing a UI to configure a network device that will be connected to the serial port of the computer while it is being configured. There is no web server or database for my application. The UI has a large number of fields (50+) spread across 16 tabs. I will write the UI in Java FX. It should run inside the browser when launched, and issue commands to the network device through the serial port. A UI has several input fields spread across tabs and one single Submit button. If a field is edited, and the submit button clicked, it issues a command and sends the new datum to the device, retrieves current value and any errors. so if input field has bad data, it is indicated for example, the field has a red border.
Is there a standard design pattern or Java utility class to accomplish the frequently encountered, 'generic' parts of this scenario? lazy loading, submitting only what fields changed, displaying what fields have errors etc. (I dont want to reinvent the wheel if it is already there). Otherwise I can write such a class and share it back here if it is useful.
someone recommended JGoodies Bindings for Swing - will this work well and in FX?

Many thanks for the reply.
In the servlet create an Arraylist and in th efor
loop put the insances of the csqabean in this
ArrayList. Exit the for loop and then add the
ArrayList as an attribute to the session.I am making the use of Vector and did the same thing as u mentioned.I am using scriplets...
>
In the jsp retrieve the array list from the session
and in a for loop step through the ArrayList
retrieving each CourseSectionQABean and displaying.
You can do this in a scriptlet but should also check
out the jstl tags.I am able to remove this problem.Thanks again for the suggestion.
AS

Data Manager Packeage and Process chain si not working

Hi All,
I executed a data manager package which contain a process chain to revaluate the one of my Account dimension meneber Say "Revenue". I am working on BPC NW 7.0
steps I followed:
1. I created a script logic file and created a custom process chain.
process chain steps:
a) Start variant
b) Modify dynamically
c) Run Logic
d) Or and Clear BPC tables
2. This process chain was included in data manager package.
3. Data manager package was modyfied to include parameters and scipt logic file name.
4. executed data package
The issue is " when I execute Data manager Package" I dont get any error but when I View status I dont see any pachage running or completed. If I see Process chain, It is failing at first step of Modify dynamically..no clue?
Could you please let me know what could be a issue?
Cheers,
SAC

I encounter this problem, Do this Steps:
I. First,check if your process chain is existing in the Library.
II.If yes,follow the steps below:
1. Edata - organize Package - Modify your Package.
2.Check if you had the correct process chain.
3.IF yes, Click View package at its right side.
4.Expand the Task Folder and take note of the Task Name (e.g. ZBPC_PROT_RUN_LOGIC)
5.click Advance,Compare the task name that you noted in the syntax TASKS
(e.g. TASK(ZBPC_PROT_CF_RUN_LOGIC,SUSER,%USER%)
6. It should be the same.
Running package but not appearing any status happens when the system cannot find your process chain.
hope this helps,

How to set a variable value on the BPC Data Manager

Hello BPC Experts,
I'm creating a BPC10 NW version demo environment for our prospect customer.
I made a data manager to import BW data into BPC model from BW cube.
I need to import just one month data into BPC from the BW cube that has more than one month data.
When I run the data package manually, I can select a member of the time dimension prompt and I can import specific month data I want.
But, in a case where the program (data manager) runs by JOB monthly,
I can't select a member of the time dimension prompt manually.
So I want to know how to set a variable value to the time dimension prompt from a system date etc. automatically.
Are there any way to set a variable value to the time dimension prompt on the data manager automatically from a system date?
Or, do you have any other solution to import just one month data into BPC from the BW cube that has more than one month data by the data manager running on JOB ?
(without selecting a member of the time dimension prompt of the data package manually)
Thanks in advance,
Keisuke

Hi Gersh
Sorry for my late reply and thanks for your helpful information.
I tried the second way of your information and I could configure it.
And I 'll try first way of your information.
Regards,
Keisuke

Data Manager lock

Similar Messages

Maybe you are looking for