Data Manger error: the system cannot find the file specified.
Hi,
I am using VPN to connect to MDM repository and get error:
the system cannot find the file specified. Windows sockets error code 2. And forced exit data manager. However I can login the other repository on the MDM server. Can you suggest any way to fix? Thanks!
David
It really does sound as if you are having a problem with ports. If you are able to connect to even one repository, then the problem is not with the Data Manager.
Here is how you can check:
1) Open the MDM Console, and note the port numbers of the loaded repositories.
2) Now open a Command Prompt window and type the following command:
telnet [mdm server] [repository port]
(you can use either the machine name or IP address for mdm server).
For example:
telnet 10.20.30.40 5500
You should get an empty command-type window with no error messages. This indicates success. You can close the window by clicking on the "X". Try this with the one repository which works in the DM, and then with the other repositories.
Let us know the results,
Walter
Similar Messages
-
Infopath 2013 SOAP Web Service Data Connection - Error: The file is not a valid XML file
Here are the steps to replicate the issue I’m having when adding lists.asmx or any other SharePoint web service in InfoPath 2013. This web service opens fine in the browser from my desktop. My account is a farm administrator and is added to the
web application’s User Policy. I can use these services just fine using Nintex 2013 Workflow.
Open InfoPath Designer 2013.
Select Blank Form and click Design Form button.
Click “Data” tab.
Click “From Web Service” and select “From SOAP Web Service”
Enter https://mysiteurl.com/_vti_bin/lists.asmx?WSDL for the web service definition.
Click Next.
Windows Security window pops up.
Enter a credential. I tried both my account and the farm account. My account is a farm admin and is added to the web application’s User Policy with Full Control.
Click OK. It prompts for credential multiple times.
I get below this error messages:
Sorry, we couldn't open https://mysiteurl.com/_vti_bin/lists.asmx?WSDL
InfoPath cannot find or cannot access the specified Web Service description.
The file is not a valid XML file.
Not enough storage is available to process this command.
We have a project that is in need of these services using InfoPath so any help is greatly appreciated.Hi Brian_TX,
For your issue, try to the following methods:
Change your service binding in web.config to:binding="basicHttpBinding". It seems in VS it defaults to wsHttpBinding.
Replace all instances of "parameters" from the web service wsdl with the name "parameter"
There are some similar articles about the issue, you can have a look at them:
http://www.infopathdev.com/forums/t/23239.aspx
https://social.msdn.microsoft.com/Forums/office/en-US/621929c3-0335-40af-8332-5a0b430901ab/problems-with-infopath-web-service-connection?forum=sharepointcustomizationprevious
https://social.msdn.microsoft.com/Forums/en-US/5fa5eca8-f8d7-4a2e-81ba-a3b4bdcfe5af/infopath-cannot-find-or-cannot-access-the-specified-web-service-description?forum=sharepointcustomizationlegacy
Best Regards
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] -
My HP Officejet 8500 will not install on windows 8.1. The error message says:
The system will not find the specific fileHi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the error no longer appear..
If the issue persists continue follwoing the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Error: cannot find bundle file or key for resource type
Hello,
Please help in finding out the cause & resolving the below errors.
Logs from the default trace:
Error Log Message: cannot find bundle file or key for resource type http://sap.com/xmlns/ciphotocomp, use fallback
Error Location: com.sapportals.wcm.service.resourceTypeRegistry.ResourceType.getDescription( Locale )
Thanks & Regards
Maha,<< Do not post the same question across a number of forums >>
-
hi,
am running the below command for moving sql serevr mdf and ldf files from one drive to another : c drive to d drive:
but am getting the below error
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
use master
DECLARE @DBName nvarchar(50)
SET @DBName = 'CMP_143'
DECLARE @RC int
EXEC @RC = sp_detach_db @DBName
DECLARE @NewPath nvarchar(1000)
--SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
DECLARE @OldPath nvarchar(1000)
SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
DECLARE @DBFileName nvarchar(100)
SET @DBFileName = @DBName + '.mdf';
DECLARE @LogFileName nvarchar(100)
SET @LogFileName = @DBName + '_log.ldf';
DECLARE @SRCData nvarchar(1000)
SET @SRCData = @OldPath + @DBFileName;
DECLARE @SRCLog nvarchar(1000)
SET @SRCLog = @OldPath + @LogFileName;
DECLARE @DESTData nvarchar(1000)
SET @DESTData = @NewPath + @DBFileName;
DECLARE @DESTLog nvarchar(1000)
SET @DESTLog = @NewPath + @LogFileName;
DECLARE @FILEPATH nvarchar(1000);
DECLARE @LOGPATH nvarchar(1000);
SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
exec xp_cmdshell @FILEPATH;
exec xp_cmdshell @LOGPATH;
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
go
can anyone pls help how to set the db offline. currently i stopped the sql server services from services.msc and started the sql server agent.
should i stop both services for moving from one drive to another?
note: I tried teh below solution but this didint work:
ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
Update:
now am getting the message :
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
(3 row(s) affected)
(3 row(s) affected)
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".First you should have checked the database mdf/ldf name and location by using the command
Use CMP_143
Go
Sp_helpfile
Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
Database is already detached that’s why db offline failed
Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
Attached step is failing as there is no mdf file
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
Solution:
Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf. -
Error message on my development workstation: The system cannot find the file specified.
Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
Inherits System.Web.UI.Page
Private objOpenFilesreport As OpenFilesReport
Private rptOpenFiles As ReportDocument
Private strLastErrorMessage As String = Nothing
Private errLastException As Exception = Nothing
Dim strFileKey As String
Dim strJurisdictionCode As String
Dim strStaffId As String
Dim strReportId As String
Private Sub ConfigureCrystalReports()
Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
Dim rptopenfiles As New ReportDocument
rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports folder of my project
Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
ConnectionInfo.DatabaseName = my database
ConnectionInfo.UserID = login id of user
ConnectionInfo.Password = user's password
SetDBLogonForReport(ConnectionInfo, rptopenfiles)
CrystalReportViewer1.ReportSource = rptopenfiles
End Sub
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
ConfigureCrystalReports()
End Sub
Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = ConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severinhello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.
-
"The system cannot find the path specified" error
Hi, Thanks for taking the time and reading.
I had to update an old report that was made in CrystalReports. I copied the rpt files and pasted them into a csharp solution in VS 2010.
The report structure is of a Main report and 6 subreports. I have to run this Main report many times and feed it a different integer as a parameter.
I can preview the report in report viewer perfectly. When i try to export the main report into a pdf format
i get an exception. I have tried a few different formats and it spews the same error.
Oddly enough the export sometimes works if the report i am previewing has the "Save data in the report" check box checked. My guess is that this is cached. Also when i run just the subreports through my application, it works.
Things i have tried:
I installed: CRRuntime_64bit_13_0_13
I installed: CRforVS_13_0_13
Took a look at the Procmon and i could not find an access denied error
Event Viewer has no detail.
Changed Registry values of ConnectionDirectoryPath and ReportDirectoryPath to "c:\"
Code:
if (!Directory.Exists(filePath))
Directory.CreateDirectory(filePath);
string fileName = filePath + string.Format(GlobalVaraiables.FILE_SAVE_NAME, i);
cryRpt.SetParameterValue(GlobalVaraiables.FUND_DATA_KEY_PARAMETER, i.ToString());
cryRpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, fileName);
Error message:
System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
at FundDataPDFSaver.SaveReport.GenerateReports(List`1 l) in C:\Users\user.name.here\Documents\Visual Studio 2010\Projects\FundDataToPDF\FundDataPDFSaver\SaveReport.cs:line 74
System Details:
Windows 7 Enterprise N 64 bit
ServicePack 1
IDE:
Visual studio 2010 .Net framework 4
Application is set to run as "Any CPU"
CrystalReports :
dll's: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll
Thanks for your helpI don't see where you're ever setting the logons for the tables in the report and subreports. The reports with saved data are working because they already have data in them. The reports without saved data are not working because they don't know how to connect to the database.
See the Database section here Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki for more information about how to set the logons.
-Dell -
Error [0x80070003] The system cannot find the path specified
We have Windows 2012 Server hosting 2 VMs - Domain Controller & RDS. We have been doing Windows Server Backup incremental and have an ongoing issue with scheduled backups each night. The backup shows completed with warnings and generates
2 log files.
The first log files shows:
Backup of volume \\?\Volume{5d46f853-5db2-11e2-93e7-806e6f6e6963}\ succeeded.
Backup of volume C: succeeded.
Backup of volume F: succeeded.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: ACBCD71E-A8CA-4672-B951-52C1BE8444BE
Caption : Backup Using Child Partition Snapshot\FMLRDS1
Logical Path:
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: Host Component
Caption : Host Component
Logical Path:
The 2nd log file more often than not shows:
Backup of volume E: has failed. Backup failed as shadow copy on source volume got deleted. This might caused by high write activity on the volume. Please retry the backup. If the issue persists consider increasing shadow copy storage using 'VSSADMIN Resize
ShadowStorage' command.
Error in backup of E:\ during enumerate: Error [0x80070003] The system cannot find the path specified.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: 2B4A9541-C88B-442E-9A7A-6D8A27342C11
Caption : Backup Using Child Partition Snapshot\FMLDC1
Logical Path:
Error : 8078010D
Error Message : Enumeration of the files failed.
Detailed Error : 80070003
Detailed Error Message : (null)
We had been getting a successful backup once or twice a week which showed completed (with no mentioned of warnings) but now it regularly shows completed with warnings as noted above.
We did a manual full backup of the DC to a different external drive a few days ago and that completed without warnings and the backup shows: E: Completed 63.38 Full - VSS Copy Backup Successful, 8/27/13 3:35 PM - 4:43 PM. Data Transferred 63.38
On a side note, we can view the logs in the windows/logs/windowsserverbackup directory but when we attempt to view the details of a log file through the Local Backup Console for any log which shows completed with errors, we get a "MMC has detected an
error in the snapin and will unload and then it shows Object referenced not set to instance of an object." The manual backup noted above that was successful is able to be viewed through the Local Backup Console without this error.
Any idea as to why this is failing during the scheduled backups? This hosts a database that we need to have regular successful backups.Hi,
First please follow the steps below to re-register dll files. Detailed information could be found here: http://support.microsoft.com/kb/940032:
1. Click Start, click Run, type cmd, and then click OK.
2. Type the following commands at a command prompt. Press ENTER after you type each command.
3. cd /d %windir%\system32
4. Net stop vss
5. Net stop swprv
6. regsvr32 ole32.dll
7. regsvr32 oleaut32.dll
8. regsvr32 vss_ps.dll
9. vssvc /register
10. regsvr32 /i swprv.dll
11. regsvr32 /i eventcls.dll
12. regsvr32 es.dll
13. regsvr32 stdprov.dll
14. regsvr32 vssui.dll
15. regsvr32 msxml.dll
16. regsvr32 msxml3.dll
17. regsvr32 msxml4.dll
Please let us know if any command failed to be performed with an error.
If issue still exists, have a try with the step it provided "VSSADMIN Resize ShadowStorage" to enlarge the shadow storage.
Also you could test to delete all old Shadow Copies by acccessing <Drive> Properties --> Shaodow Copies --> Delete Now. This will remove all your backup information so if it is not acceptable, just skip this step.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected] -
Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003
I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks. -
The system cannot find the file specified.Windows sockets error code:2.
Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain -
"System cannot find the path specified" error message !HELP !
Hi
In doing a program to read a string from the buffer, I am getting an error message that says "cannot find the file specified"
The file was created in a previous program and I verified it does
exist at the specified location on my hard disk.
Below is the "ReadAString" program and "WriteAString" program where the String was created.
Thanks
Joe
import java.io.*;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
public class ReadAString
public static void main(String[] args)
File myFile = new File("C:Documents and Settings/Gateway User/jbproject/ssd_ch10p407/src/ssd_ch10p407/charData.txt");
FileInputStream myInputFileInAStream = null;
try
myInputFileInAStream = new FileInputStream(myFile);
catch (FileNotFoundException e)
e.printStackTrace();
System.exit(1);
FileChannel myInputChannel = myInputFileInAStream.getChannel();
ByteBuffer myByteBuffer = ByteBuffer.allocate(48);
System.out.println("\nNew buffer: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
try
//size() will return the length of the file
System.out.println("\nFile contains " + myInputChannel.size() + " bytes");
//The FileChannel object keeps track of the file's current position
System.out.println(
"The file's current position before the read into the buffer is: " +
myInputChannel.position());
while (myInputChannel.read(myByteBuffer) != -1)
System.out.println("\nBuffer after read: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
System.out.println(
"The file's current position after it read into the buffer is: " +
myInputChannel.position());
System.out.println("\nString read: " +
( (ByteBuffer) (myByteBuffer.flip())).asCharBuffer().
toString());
System.out.println("Buffer after flip: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
// set the limit to capacity and the position to 0
myByteBuffer.clear(); //clear the buffer for the next read
} //end of while loop
System.out.println("\nEOF reached.");
myInputFileInAStream.close(); //close the file and the channel
catch (IOException e) {
e.printStackTrace(System.err);
System.exit(1);
System.exit(0);
import java.io.*;
import java.nio.*;
import java.nio.channels.FileChannel;
//This program takes a text phrase (in Unicode characters;(2 bytes each character)
//and puts it into a buffer via a CharBuffer,
//then loads the buffer contents into a file channel
//then outputs to a file.
//When you have successfully run the program, go to Start | Search |
//type in "charData.txt" and examine the contents of the file. OR
//go to the notepad and open
// C:
//Documents and Settings
//GateWay User
//jbproject
//ssd_ch10p407
//src
//ssd_ch10p407
//you should see charData so right click on it and choose "open with " "Notepad"
// and verify the contents are "Garbage in Garbage out"
// each time you run the program, "Garbage in Garbage out " should be concatenated.
public class WriteAString
public static void main(String[] args)
String phrase = new String("Garbage in Garbage out\n");
String dirname = "C:/Documents and Settings/Gateway User/jbproject/ssd_ch10p407/src/ssd_ch10p407";
String filename = "charData.txt";
File dir = new File(dirname);
//now checkout the directory
if (!dir.exists()) {
if (!dir.mkdir()) { //.....create it
System.out.println("Cannot create directory: " + dirname);
System.exit(1);
else if (!dir.isDirectory()) {
System.err.println(dirname + " is not a directory");
System.exit(1);
//create the fielstream
File myFile = new File(dir, filename);
FileOutputStream myOutputFileInAStream = null; //place to store the stream reference
try
myOutputFileInAStream = new FileOutputStream(myFile, true);
System.out.println("File stream created successfully");
catch (FileNotFoundException e)
e.printStackTrace(System.err);
ByteBuffer myByteBuffer = ByteBuffer.allocate(1024); //ByteBuffer object created
CharBuffer myCharBuffer = myByteBuffer.asCharBuffer(); // create view buffer
//transfer the phrase to myByteBuffer via mycharBuffer
myCharBuffer.put(phrase);
//update myByteBuffer limit (position times 2 because each Unicode
// character takes 2 bytes) to store in the ByteBuffer
myByteBuffer.limit(2 * myCharBuffer.position());
System.out.println("myCharBuffer position is " + myCharBuffer.position());
//create the file output stream channel object
FileChannel myOutputChannel = myOutputFileInAStream.getChannel();
System.out.println("new buffer: position = " +
myByteBuffer.position() +
"\tLimit = " + myByteBuffer.limit() +
" \tcapacity = " + myByteBuffer.capacity());
//each time the program is run, the phrase is again loaded into the buffer.
// Run the program several times and open charData.txt to verify that the
//data went into the file.
//Load the data into the buffer
for (int i = 0; i < phrase.length(); i++)
myByteBuffer.putChar(phrase.charAt(i));
System.out.println("Buffer after loading : position = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
myByteBuffer.flip(); //flip the buffer ready for file write
System.out.println("Buffer after flip: position = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
//write this file
try
myOutputChannel.write(myByteBuffer); //write the buffer to the file channel
System.out.println("The file contains " + myOutputChannel.size() + " bytes" +
" Do you see this number double every time you run the program?");
//you should see 48 characters writen to the file each time (phrase has 24 characters)
myOutputFileInAStream.close(); //close the output stream and channel
System.out.println("Buffer contents written to file");
catch(IOException e)
e.printStackTrace(System.err);
System.exit(0);
//After running the program once my output was:
//File stream created successfully
//myCharBuffer position is 23
//new buffer: position = 0 Limit = 46 capacity = 1024
//Buffer after loading : position = 46 Limit = 46 capacity = 1024
//Buffer after flip: position = 0 Limit = 46 capacity = 1024
//The file contains 46 bytes //Do you see this number double every time you run the program?
//Buffer contents written to fileRight - File is smart. Otherwise, you'd have to build
platform-specific paths by hand, using file.seperator,
to keep your code multi-platform. Ew.
Grant
IC..
Aldaris84 bows his head in honour of the man/woman that created the clearly intelligate File class
:) -
H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information. -
Hello,
we were planning to Upgrade from AGPM 4.0 to AGPM 4.0 SP2. The new AGPM should be placed on a new server. Additionally we created a new service account as the password of the old service account has been lost. We granted the new service account Full Rights
in "Domain Delegeation" and "Product Delegation", then stopped the AGPM Service on the old server.
On the new server AGPM was installed using the new service account, then the service was stopped and the archive was copied rom the old to the new server. The customer could edit policies, but not deploy them. Because of this, we changed back to the old
server, but copied the folders that were changed on the new server to keep them up to date.
Now creating a controlled Group Policy from a template causes the error
„The system cannot find the file specified. (Exception from HRESULT: 0x80070002). We tried several templates and even created new ones but the problem persists.
The following things do work:
- editing a controlled policy
- renaming a controlled policy
- check in/check out of a policy
- set a uncontrolled policy to controlled (needs to grant the serviceaccount Full rights to the policy before)
- deletion of a controlled policy
- creating a template from a policy
Thank you in advance for your help.0x80070002 usually means that the source could not be found or located. Make sue that the FQDN path to your templates is the correct one as well as your DNS is
properly configured.
sharing some manuals @: http://1drv.ms/1kk6u6j -
Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
DimitriHi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
System error 3 has occurred. The system cannot find the path specified
Enterprise Manager 12c Release 2 - 12.1.0.2.0
Agent Deployment Failed - host agent for Windows 32 bit, version 12.1.0.2
Deployment Phase Name: Secure Agent
Error: Execution of command C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent' on host myhost.mydomain.com Failed
Cause: Error Message: System error 3 has occurred. The system cannot find the path specified. Exit Code :2
Recommendation:
Fix the cause of the error and retry the operation (or) manually run the following commands on the remote host
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat secure agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat config agent addinternaltargets'
Any ideas? thanksI installed Cygwin, and it's working fine I suppose. From my EM12c host I can connect to the Windows host via SSH:
ssh WinHost
The authenticity of host 'WinHost (XXX.XXX.XXX.XXX)' can't be established.
RSA key fingerprint is XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'WinHost' (RSA) to the list of known hosts.
oracle@WinHost's password:
Last login: Wed Sep 19 17:26:40 2012 from SomeHost
oracle@WinHost ~
$ cygrunsrv -h
Usage: cygrunsrv [OPTION]...
Main options: Exactly one is required.
-I, --install <svc_name> Installes a new service named <svc_name>.
-R, --remove <svc_name> Removes a service named <svc_name>.
----------------- blah blah blah ------------------------------------
Report bugs to <[email protected]>.
oracle@WinHost ~
$ date
Thu, Sep 20, 2012 10:10:01 AM
oracle@WinHost ~
$ cd /cygdrive/c/oracle/product/emagent12/ - this is the folder where I try to install the agent
oracle@WinHost /cygdrive/c/oracle/product/emagent12
$ ls -la
total 0
drwx------+ 1 oracle None 0 Sep 20 09:55 .
drwx------+ 1 WinHostAdmin None 0 Sep 19 12:31 ..
Thanks
Maybe you are looking for
-
Can I install SAPDings on Windows system that doesn't have SAPGUI installed
I am working on a Windows system that has never had SAPGUI installed and am dealing with a PowerPoint file that was created on a system that did have SAPGUI, and the author used some SAPDIngs characters but did not embed the TT fonts in the PPT file
-
Problem with log4j.properties and level DEBUG
Hi, I need some log4j help. I create 2 different appenders in the log4j.properties file and it works. This is my complete log4j.properties: log4j.logger.log1=DEBUG, log1 log4j.logger.log2=DEBUG, log2 log4j.appender.log1=org.apache.log4j.DailyRollingF
-
SQL> execute dbms_logmnr.ADD_logFILE('/u01/app/oracle/oradata/test/redo01.log'); PL/SQL procedure successfully completed SQL> execute dbms_logmnr.ADD_logFILE('/u01/app/oracle/oradata/test/redo02.log'); PL/SQL procedure successfully completed SQL> exe
-
Adobe X Pro Excel Dates Conversion Incorrect
When I save a table to an Excel worksheet, dates such as 11-Jul-12 are converted to 11-7-12 in Albanian date format. Correct date should be 7/11/12. Moreover, the month and dates would interchange every so often. I was not able to convert to the
-
HT4463 I have FaceTime on my MacBook Pro, but I can't open it.
It is a new computer and I cant seem to initiate a FaceTime connection. It seems to have come with it on the dashboard (I did not by from app store). I have an Apple ID and a me.com account... Any suggestions??