Data Mapping Templates for NON-RTA Systems

Hi all,
I'm designing n extractor for my NON-SAP System.
I've been reading the Appendix B: Data Mapping Templates for Non-RTA Systems from Configuration Guide - SAP GRC AC 5.3.
I have a couple of questions regarding the size of two fields in table ACTION PERMISSION OBJECTS TEMPLATE
Is correct the size that the documents says about fields:
ACTION (document says it's 20 but in other tables is 50)
PERMISSION (document says it's 10 but in other tables is 100
ACTVT (document says it's 10but in other tables is 50)
Thank you in advanced.

Hi Luis,
Yeah i will follow the recomendations but i'm updating some files to RAR and i've seen another kind of inconsistency such as in the table User File Template. Recomendation says that both FNAME field and LNAME field are 50 size each one but in my case i can update a FNAME 51 size and a LNAME 49, i mean between FNAME and LNAME it's 100 size.
Cheers.

Similar Messages

'Error Occured in the Source System' for Non SAP system

Hi Gurus,
We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
Please suggest me how to proceed for this error for Non SAP Systems?

Hi,
Check the RFC connection in SM59 and reactivate the source system again.
Hope this helps..
Thank you,
S R.

Data Migration Template for Singapore Payroll.

Hi
I need a help on data migration template for Singapore Payroll.
Would also need guidance on what i srequired in case i want to migrate the last year payroll cluster data from legacy system to ECC 6.0.
Will appreciate if you can send me the migration template at my mail id.
Thanks and regards

Hai..
Check some of the fields mentioned below.. it may be of some use to u..
Client
Personnel Number
Sequential number for payroll period
Payroll type
Payroll Identifier
Pay date for payroll result
Period Parameters
Payroll Year
Payroll Period
Start date of payroll period (FOR period)
End of payroll period (for-period)
Reason for Off-Cycle Payroll
Sequence Number
Client
Personnel Number
Sequence Number
Country grouping
Wage type
Key date
Rate
Number
Amount

EWA report for non-abap systems

Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
Virgilio

Hi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram

How to setup EWA for non-ABAP system with SM 4.0 ?

Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
Thanks.

Hi Andrew,
we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
This is the old, available standard solution. At the moment we develop it also for java stand alone.
I think it will be available with the new ST-SER in autumn
Regards,
uDo

EWA for non-ABAP systems

Hi,
We are planing to implement EWA for Java systems. Currently EWA is active for all ABAP systems. Do we need Wily Introscope in order to setup the EWA for non-ABAP systems? Or just we can use the SMD to generate EWA reports for Java systems?
Any idea?
Thanks,
Kris

Thanks Paul
We are on SM 7.0 EhP1. But I see following info in note 976054. It says data sources for EWA are different on 7.0 EhP1, does it mean we don't need wily from 7.0 EhP1 onwards?
Data sources in Solution Manager Diagnostics up to SP17 used for EWA for non-ABAP components analysis are:
                      - Introscope (SAP Note 797147),
                      - Garbage Collection (SAP Note 1079125) and
                      - Portal Activity Reporting (SAP Notes 936612 to know how to activate PAR and 914791, 1075276 to configure SQL
                        Command Console).
Starting with Solution Manager 7.0 EHP1 (SP18) the data sources are:
                      - Solution Manager BI for performance data
                      - Configuration and Change DB(CCDB) for configuration data
Thanks,
Kris

Solution Manager System Monitoring for non SAP system

Dear Support,
I have configured the CCMS Agent (SAPCCMSR) for non-SAP system (Windows 2008R2).
The system information (e.g. CPU, Memory, Disks etc) has already showed in RZ20 of Central Monitoring system (e.g. Solution Manager).
How can I do to configure to display these information in the Alert Inbox tab on System Monitoring Workcenter?
Best regards,
Fan Hung

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

Roles for Testing ChaRMs for Non-Abap Systems

Hi,
Can you please suggest what all authorizations are required for Testing the ChaRM functionality for non-abap systems
Thanks in advance
Regards,
Reddi

hi
check the link
Check the Configuration guide for the prerequisites.

Configuration Managment Pack for Non Oracle Systems (new)

Hi ,
There is a pack called "Configuration Management" for the database. This pack manage hardware , software , updates, patches, etc for host that have installed any Oracle Software.
Now, in EM Release 2 there is a new pack "Configuration Managment Pack for Non Oracle Systems" wich basically will allow me to the same but without the requirement to have any Oracle software installed.
The question is : Where can i find a white paper about it? i been looking around and there is only mentions of the product, but not extra info. I know is out already 3k p/processor..
Any ideas?
Sergio Benavides

Found this dated Oct 2005
(Note the "priced in Advance of Availability" piece)
Standalone Managers
Configuration Management Pack for Non-Oracle Systems (priced in Advance of Availability) 2.375 522,59 Per Processor -
Provisioning Pack (priced in Advance of Availability) 2.375 522,59 Per Processor -
Service Level Management Pack (priced in Advance of Availability) 79 17,42 Test -
(Must license with Beacon Plus Test pricing) 2.375 522,59 Beacon -
System Monitoring Plug-in for Hosts (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Databases (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Middleware (priced in Advance of Availability)
25 1.188 261,29 Per Processor -
System Monitoring Plug-in for Network Devices (priced in Advance of Availability)
26 1.188 261,29 Per Network Device -
System Monitoring Plug-in for Storage (priced in Advance of Availability)
27

Mapping deploy for Non-Oracle Data Source hangs

Hi All,
I am trying to deploy mapping for Non-Oracle Data Source and it hangs.
Oracle version is 10.2.0.3 and OWB version is 10.2.0.1.3.1
It would be really appreciated if you can help.
Thanks!
PS.

That helpes quite a bit. I still can't get the app to retrieve data, but I am getting a more useful message in the log:
[Error in allocating a connection. Cause: Connection could not be allocated because: ORA-01017: invalid username/password; logon denied]
As you suggested, I removed the <default-resource-principal> stuff from sun-web.xml and modified it to match your example. Additionally, I changed the <res-ref-name> in web.xml from "jdbc/jdbc-simple" to "jdbc/oracle-dev".
The Connection Pool "Ping" from the Admin Console is successful with the user and password I have set in the parameters. (it fails if I change them, so I am pretty sure that is set up correctly) Is there another place I should check for user/pass information? Do I need to do anything to the samples/database.properties file?
By the way, this is the 4th quarter 2004 release of app server. Would it be beneficial to move to the Q1 2005 beta?
Many thanks for your help so far...

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

CP850_BIN2 for non unicode systems??

Hi All
This is possibly a really stupid question and I think I know the answer, but I need some one else to say yes!
We are currently running a SQL upgrade, from 2000 to 2005, for ore ECC6 platform. As part of the upgrade it is recommended that you change the DB collation from SQL_Latin1_General_CP850_BIN to SQL_Latin1_General_CP850_BIN2 which allows unicode data to be sorted properly.
My question is, if this enhancement is to correct a unicode issue, will it affect my current non-unicode system if applied. I don't want it to cause any issues if I apply it during the upgrade.
I don't think it will for various reasons, but I am not 100% can anone let me know if I am right, please!
Thanks in advance!
Phil

Hi,
you will have no issues with your current system when you go to BIN2 now (before you upgrade to SQL 2005). And you have to keep in mind, that you have to have BIN2 for all newer releases of SAP. So if you plan to ever upgrade your system to a newer release in some point in time, you should go to BIN2 now, as otherwiese you have to perform a homogenous systemcopy with R/3 (which is not so much fun) if you miss it now. On SQL 2005 you can't change the collation easily, so if you don't have the correct one, you only can change it when you unload the data, drop the DB, create the DB in the correct collation and reload the data.
Regards
Clas

Encrypt data send from a non-SAP system to ECC.

Hi,
We are tryign to encrypt the credit card details send from web (non-sap system) via a xml file to ECC.
From Basis side, I have exported the public key from the ECC for the web server to encrypt the CC details while sending via xml.
The external web consultants encrypted the cc detail with the public key and send it via xml but that was not able to decrypt at the ECC side.
The developers were using the FM 'CCARD_DEVELOPE'at ECC to decrypt the data in the xml file. It was saying SSF error: No data transfered.
Meanwhile SAP CryptoLib is installed and credit card encryption/decryption is working fine for CC details entered via GUI interface.
Is there anything I am missing out here to encrypt CC details send from a Non-SAP system to ECC.? Do we need to load the SAP cryptolib in the non-SAP system to ecrypt this data at the senders end. Or is there a alternate solution for this ?
We are in ECC6.0/RHEL/Oracle10204.
Appreciate your help.
Thanks

Hi Nelis,
Thanks for your reply.
This note does not get any information regarding encrypting data from a non-SAP system to SAp system.
I am looking setup/information for encrypting data from a non-SAP system to SAP system.
Thanks

Need to create stupid proof templates for non-designers

Ok folks, I'm new to this forum having come across it in search of a solution to my problem.
I need to create illustrator template files (.ai not .ait) that customers can download and use to create their own artwork for print. I have to create them in every printable paper format from business cards to A3 posters, folding, non-folding yada yada.
Now, previously, we used an .ai file with a guide layer we created. This guide layer had all relevant info, was named accordingly. It was set not to print and locked. As I tend to use print to file, distiller and all, this has always been perfectly adequate to create my pdfs. Of course, this doesn't work the same way when saving a pdf, which is what most people do. However, customers who wish to download the templates are having some difficulty with the concept of 'make sure you delete the guide layer before saving your pdf'.
For the most part, the customers using these files are not illustrator literate. Even though there are clear instructions to 'delete' the guide layer when saving the needed pdfs, they are failing to do so. This means when the .ai (with the non printable layer) is saved to pdf, the guide layer as a hidden object is saved within the pdf. Upon printing at our printing facilities, the guide layer has been printed with disasterous results.
A possible solution we came up with was to use the ruler guides to create the guide layer. For this solution to work though, I need to be able to use different colours for different guides within the same document. Which we can't. We can only change all the guide colours and they are all the same colour.
Another idea would be to outline text indicating various printable and non-printable areas and making them into guides via View>guides>make guides, which works to an extent but looks messy, especially when viewing the full page and again, isn't particularly distinctive, leading back to having different guides in different colours.
I've come across another possible solution involving template layers. Viewing the resulting pdf seems fine and in all purposes it does what we need, except for when reopening the saved (not printed) pdf back in illustrator, the template layer is still there and I need it gone. The same way it would be if the .ai were printed to postscript and sent through distiller.
My ideal solution would be to have to ability to have the different coloured ruler guides in place throughout my document, but as I previously stated, all guides have to be the same colour and that's useless in this instance.
So, has anyone got any bright ideas. Coincidentally I need to create the same templates for both psd and indesign but I'll cross that bridge when I've figured this out.

Hey Mike, thanks for the response.
1. Not a chance, if, even when the process is described in great detail in an info pdf, available as info on the website (with screenshot instructions) and mentioned in the .ai file itself, they aren't even deleting the guide layer, then turning off 'Preserve illustrator editing capabilities' is kind of a stretch. Like I said, the folks these templates are to be designed for are not illustrator literate for the most part.
2. Not sure if this would work. I'd have to look into it.
3. Beyond my capabilities. I'll let you know if number 2 works.
One possible solution I've come up with uses the idea of a template layer always on top, with 'DELETE THIS LAYER' and screenshot of layers pallette and clear little red arrows etc. If I can the template layer to always remain on top, with their artwork layer underneath, they would have to toggle hide/unhide to view their artwork, and the reminder to remove the guide layer would be pretty much in their face. That's not a guarantee either though.
Personally, I think what I've been asked to achieve is a pretty hard task and honestly, I'm thinking there are no failsafe options.

EWA reports for non abap systems

Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!

Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir

Data Mapping Templates for NON-RTA Systems

Similar Messages

Maybe you are looking for