Data Migration from 11i to R12 Global - Open POs,lines, receipts & on hand upload, Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines?

Hi Friends,
We are in a phase of data migration from 11i to R12 
I was discussed with client & they wants extraction of all open POs which was generated after 01 Jan 2014 to till date in 11i.
Condition for open POs is PO qty-received qty=>0
critical Example for open PO is :PO no: 10 has 4 lines, 3lines full qty has been received & for 1 line partial qty(say 50 out of 100) received.
in this case he wants in R12 uploading as PO no:10 should entered as open PO with all 4lines & 3 lines complete receipt should be done, for 4th line partial qty i.e 50 should be received.
the question is if we upload on hand qty first, then open POs & receipts, it will increase the onhand qty in new system(mismatch of on hand qty's 11i to R12) 
Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines.
Or Please advice best solution.
Thanks & Regards
Giri

adetoye50 wrote:
Dear Contacts Journal Support Team,
FYI, this is a user to user support forum.  You are NOT addressing Apple here.
Honestly, I doubt anyone is really going to take the time to read the novel you have written.

Similar Messages

  • Migrating from 11i to R12 - setup reports and diagnostics

    Hi,
    we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.

    983173 wrote:
    Hi,
    we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
    Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
    Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
    Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
    Identifying Data Model Changes Between EBS 12.1.3 and Prior EBS Releases
    https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
    EBS Seed Data Comparison Reports Now Available
    https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
    eTRM
    http://etrm.oracle.com
    Thanks,
    Hussein

  • Migrating Workflow Customizations from 11i to R12

    Hi:
    I have customizations to the PO Account Generator workflow that need to migrate from 11i to R12. I've attempted to drag 'n drop and copy/paste between workflow processes, but have been unsuccessful. Does anyone know of a way to migrate changes in a workflow process?
    Thanks.

    I've attempted to drag 'n drop and copy/paste between workflow processes, but have been unsuccessful.Do you get any error? Was the file replaced when you upgraded to R12?
    Thanks,
    Hussein

  • Upgrade from 11i to r12 application servers with Discoverer 10g

    Hello, one and all.
    I have recently upgraded from 11i to r12 Oracle financial application server, after much patching and testing we finally came to the Discoverer application server.
    Most workbooks open fine, however it seems that some of them (about 3%) reference columns that no longer exist in r12, for example, SET_Of_BOOKS_ID has become LEDGER_ID in r12 on the gl.gl_je_lines table.
    This causes any workbook that references that business area to return an error 'Database Error - ORA-00904: " O974567"."SET_OF_BOOKS_ID": invalid identifier.
    Well and good; I think that that's caused by the EUL not being refreshed after the upgrade, so I go to the Discoverer administrator and refresh the general ledger Business area. This unfortunately renames several objects inside the business area, including SET_OF_BOOKS_ID to LEDGER_ID, so instead of that error, we now get several 'Missing item or condition' errors until the workbook will not open at all with an 'Item dependency "" not found in the EUL.' error. This i assume is because the workbooks still reference the old items.
    I'm guessing that several Business areas and objects therein have been renamed since nearly none of the workbooks will open now. I have restored the EUL from a backup (imported all the *.eex files) however I was wondering if anyone had faced this issue.
    I apologize as I have very little understanding of Discoverer and this might be a simple fix, but I'm at this point willing to try anything for help.
    Thanks!

    user8612301 wrote:
    Hi Srini
    Srini,
    To understand your above reply,
    You say that
    1) If they are based on 11i Discoverer EUL and Folders then export EUL And WorkBooks and Import them
    into R12 Discoverer Environment..Refresh the EUL..So ORACLE will take care of the changes like 11i SOB vs R12 Ledegrs??Pl open a SR with Support on what to do with seeded EUL as part of this upgrade - I suspect you will need to import the R12 EUL as part of this upgrade.
    >
    2) If they are Custom SQL reports from 11i then just RECREATE them from SCRATCH..Correct - after you verify that they are changed to reflect the R12 data model
    >
    Am I right?
    thanks
    kp
    Edited by: user8612301 on Apr 20, 2011 8:57 AMSrini

  • Mapping of columns from 11i to R12 0 - AP Bank Accounts

    Hi All,
    We are working on application migration from 11i to R12.
    In our report columns bank_account_uses_id, customer_site_use_id and primary_flag from table AP_BANK_ACCOUNT_USES_ALL are used. Can some one help me to find how these columns are mapped in R12.
    I have all ready searched in tables IBY_PMT_INSTR_USES_ALL, IBY_EXTERNAL_PAYEES_ALL and IBY_EXT_BANK_ACCOUNTS but not able to locate exact columns.
    Regards,
    Nandeep

    Hi,
    Please refer to:
    Note: 579132.1 - R12 Payments and Payment Reports 'How To' documents), 2. How to Setup Banks in R12
    Note: 434195.1 - Bank Setups in R12 Question
    Regards,
    Hussein

  • Migration of  Approved Invoices from 11i to R12

    Hi All,
    I am migrating all approved invoices from 11i to R12 using Invoice Interface tables and "Payables Open Interface Import" Concurrent program.But in R12 the Approval status changes and to "Required" and the Accounted status of distribution line changes to Unprocessed. We do not have the set up for approval work flow process, So the invoice should be validated by "Force Validation" by checking the ‘Allow Force Approval’ in payable options. But when I am running the "Invoice Validation" program the theere is no change in the Approval status.
    Please help.
    Thanks in Advance,
    Subhrakant

    I am a newbie to Oracle Apps. I guess Oracle Apps use the "sequence" to generate the Key in the Oracle tables or is there some else mechanism.
    When migrating Oracle Apps from lower version to higher version, is there any concept of setting the sequence numbers in Oracle Apps or we don't need to take care of this ie the migration handles this automatically.The migration/upgrade script/driver should take of seeded objects,
    For your custom objects, you need to verify it yourself.
    Thanks,
    Hussein

  • How to migrate the userwise organization access rights info from 11i to R12

    Dear All,
    Is there a way to migrate the user-wise organization access rights information from 11i to R12 ? Does this falls under DBA purview ?

    I assume you are talking about Organization Access (in Inventory). As far as I know, there is no api for this. You can consider using a key-mapping software such as Data loader / winparrot.
    OR
    you can write your own script to insert records into the org_access table. It should be a straight forward insert. You just need to ensure that the combination of organization_id, responsibility_id and resp_application_id is valid.
    Hope this helps
    Sandeep Gandhi
    Independent Consultant

  • Best possible appraoch to migrate OAF personalization from 11i to R12

    Hi
    We are upgrading the EBS application from 11i to R12 and I am dealing with OAF personalization.
    Since some of the screen (Agent and Sales Dashboard) layouts in R12 are changed significantly, I believe we have no alternative but to re-implement those changes manually.
    I was wondering what would be the best approach to do this and while doing this how I can make sure that I have not missed any change.
    Appreciate any help on this.
    Swaroop

    The best possible approach is to deprecate them. Are they still needed with R12?
    Kristofer Cruz

  • Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

    Dear Community Friends,
    We are planning for upgrade from oracle apps 11.5.10.2 to R12.
    We have custom Forms,Form Libraries,Reports and Workflows.
    Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
    I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
    I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
    Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
    Links i have read for all these in our forum are:
    For Custom Forms,
    Re: Planning to upgrade from 11i to R12
    Re: Custom forms: After upgrading 11i to R12
    ofcourse,'n' number of links exists providing metalink notes also.
    Hussain,Helios and some others also has given many updates regd this.
    For custom workflow upgradation,
    Upgrade Workflow 11i to R12
    Workflow Upgrade
    Workflow Upgrade
    For reports,links mentioned the below metalink notes:
    Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
    Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
    Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
    Please correct me,if i am wrong.
    1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
    2) Open the forms using Forms Developer 10G and connect to DB
    3) Compile by clicking compilein Forms Developer and then save it.
    4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
    5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
    this will generate the .fmx's.
    frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
    Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
    6) Open the form and check in R12 instance
    As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
    Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
    As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
    Some says that reports should be converted to XML published as reports does not exists in R12.
    So,i am not clear on this.
    Thanks,
    Ganesh
    [email protected]

    Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
    Please correct me,if i am wrong.
    1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
    2) Open the forms using Forms Developer 10G and connect to DB
    3) Compile by clicking compilein Forms Developer and then save it.
    4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
    5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
    this will generate the .fmx's.
    frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
    Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
    6) Open the form and check in R12 instance
    As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
    Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
    As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
    Some says that reports should be converted to XML published as reports does not exists in R12.
    So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
    For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
    Thanks,
    Hussein

  • India localization from 11i to R12

    Hi,
    We have India localization in 11i.  Now, we have upgraded to R12.1.3.
    From DBA perspective, Is the below step enough to do in R12 for India localization?
    Latest Oracle HRMS Legislative Data Patch Available (HR Global / hrglobal) (Doc ID 145837.1)
    As per this, need to apply patch 12730429 and then followed by Datainstall and running hrglobal.drv
    Let me know if anything needs to be done apart from this.
    Regards,
    RKA

    Hi,
    Thanks.  We followed the steps as per Doc ID 954143.1.
    Also, We installed all preinstall patches as per
    Pre and Post Upgrade Requirements from 11i to R12.1 for Oracle Financials for India (India Localization) (Doc ID 1590646.1)
    But, Still after upgrade we are havings issues like TDS year is not migrated, Access some forms has errors saying "Table does not exist".
    Can you please let us know what are the other steps needs to be performed apart from installing preinstall patches before upgrade with respect to India localization?

  • Issue with Supplier site descriptive flex field upgrade from 11i to R12

    We ran into some issue when upgrade Supplier site descriptive flex field from 11i to R12.
    In 11i. we defined descriptive field on JG_PO_VENDOR_SITES. in the segment definition, we defined one of the attributes default value based on Form Field Value, and the statement is like this:
    SELECT decode(:SITE.COUNTRY,'IT','AP ITALIAN TRANSACTIONS','AP AUTOFATTURA') FROM dual
    All above worked fine in 11i, whenever the flexfield field is open in forms, the default valuse shows based on the real-time value in :SITE.COUNTRY.
    In R12, Supplier site management is in HTML format. There is no forms, which means no form value. Do you have an alternative soluction for implement the same logic in R12?
    Thank you and regards,
    Kate
    Edited by: user12100435 on Feb 12, 2013 9:06 AM

    Kate,
    Have you logged a SR and see if Oracle support can help?
    Thanks,
    Hussein

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Compile all custom forms from 11i to r12

    Hi,
    I have to compile 11i forms into R12.
    Copyresource folder and fmb to local system and compile forms manually in local system is one way
    I heard there is another easy way of compiling custom forms from 11i to r12. If you have any solution for this please help me.
    Any help is big help, thanks in advance.

    Hi;
    In addition to Hussein Sawwan great post,please review:
    Custom form upgrade 11i to R12
    Planning to upgrade from 11i to R12
    Oracle Custom 11i Forms compatablity in Oracle R12
    Oracle Custom 11i Forms compatablity in Oracle R12
    How To Migrate My Customized reports & Forms To R12?
    How To Migrate My Customized reports & Forms  To R12?
    Regard
    Helios

  • Business Folder Upgrade from 11i to R12

    Hi,
    We are upgrading from 11.5.10.2 to R12.
    In the process, we have to upgrade discoverer folder also.
    To undergo the change, we are testing one report from 11i to R12.
    The report has the business folder as po_vendors in 11i, which is taking data from PO_VENDORS table from PO schema.
    As the PO_VENDORS table is obselete in R12.
    We are trying to change the PO_VENDORS table to AP_SUPPLIERS table and we are changing schema from PO to AP.
    We were able to do that in Disco Admin, but when I run the report from Desktop, we are not able to get the data.
    Where in SQLInspector we can that the query is changed, one more interesting thing is when we run the query from backend for exact set of parameters, its returning data.
    Is there anything which we need to take care, are we doing anything wrong.
    Please help.
    Thanks,
    S

    Hi,
    We are using 3 views and a materialized view.
    Object names are
    1) AP_INVOICES
    2) AP_INVOICES_DISTRIBUTIONS
    3) AP_SUPPLIERS
    now when we change the views to base tables for e.g. AP_INVOICES to AP_INVOICES_ALL and AP_INVOICES_DISTRIBUTIONS to AP_INVOICES_DISTRIBUTIONS_ALL then our report is givng data.
    PFB the query.
    SELECT DISTINCT o215482.SEGMENT2 as E215623,o215482.SEGMENT2_DESCRIPTION as E215625,o215476.ATTRIBUTE5 as E216133,o215482.SEGMENT4 as E216142,o215482.SEGMENT1 as E216190,o215482.SEGMENT3 as E216208,o215482.SEGMENT3_DESCRIPTION as E216210,o215476.INVOICE_DATE as E216817,o215476.PAYMENT_STATUS_FLAG as E217125,o215473.PERIOD_NAME as E217133,o215487.VENDOR_NAME as E217379,o215487.SEGMENT1 as E217385,(SUBSTR(o215476.INVOICE_NUM,1,12)) as E217632,as215592_217133_OLD as as215592_217133_OLD,o215473.AMOUNT as E215705,NVL(o215476.INVOICE_AMOUNT,0) as E216800
    FROM APPS.AP_INVOICE_DISTRIBUTIONS o215473,
    APPS.AP_INVOICES o215476,
    APPS.JS_GL_CODE_COMBINATIONS_MV o215482,
    AP.AP_SUPPLIERS o215487,
    ( SELECT o215509.PERIOD_NAME AS as215592_217133_OLD_2, MAX(o215509.START_DATE) AS as215592_217133_OLD FROM ( SELECT gl.period_name ,gl.start_date ,gl.end_date ,gl.period_set_name FROM gl.gl_periods gl ) o215509 WHERE (o215509.PERIOD_SET_NAME = 'JS_GL_Calendar') GROUP BY o215509.PERIOD_NAME)
    WHERE ( (o215476.INVOICE_ID = o215473.INVOICE_ID)
    and (o215482.CODE_COMBINATION_ID = o215473.DIST_CODE_COMBINATION_ID)
    and (o215487.VENDOR_ID = o215476.VENDOR_ID)
    and (o215473.PERIOD_NAME = as215592_217133_OLD_2(+)))
    AND (o215482.SEGMENT6 LIKE :"Project Parameter 1")
    AND (o215482.SEGMENT5 LIKE :"Category Code Parameter 1")
    AND (o215482.SEGMENT4 LIKE :"Business Unit Parameter 1")
    AND (o215482.SEGMENT3 LIKE :"Cost Centre Parameter 1")
    AND (o215482.SEGMENT2 LIKE :"Account Parameter 1")
    AND (o215482.SEGMENT1 LIKE :"Company Parameter 1")
    AND (o215473.PERIOD_NAME LIKE :"Period Name Parameter 1")
    AND (o215487.SEGMENT1 LIKE :"Supplier Number Parameter 1")
    AND (o215476.CANCELLED_DATE IS NULL )
    AND ( ( UPPER(o215473.LINE_TYPE_LOOKUP_CODE) = UPPER('ITEM') OR UPPER(o215473.LINE_TYPE_LOOKUP_CODE) = UPPER('FREIGHT') ) )
    ORDER BY o215482.SEGMENT1 ASC , o215482.SEGMENT3 ASC , o215482.SEGMENT2 ASC , o215482.SEGMENT4 ASC , o215487.SEGMENT1 ASC , o215487.VENDOR_NAME ASC , (SUBSTR(o215476.INVOICE_NUM,1,12)) ASC ;
    Kindly help.
    Thanks,
    S

  • Inventory Module Upgrade from 11i to R12 - How to Copy Inventory Orgs.

    Hi All,
    We are working on R12 Upgrade project for Item Conversion.
    Requirement is to upgrade and bring all the Item setup and data from 11i to R12.
    As part of setup requirement, there are around 1900 Inventory Orgs in 11i instance. Please let me know what is the best approach / strategy to copy and bring over the 1900 Inventory Orgs.including the Master Org from 11i to R12.
    Your inputs will be highly appreciated.
    Thanks in Advance !
    Regards,
    Nityanand.

    Reporting Set of Books (MRC) in 11i is called as Alternate Currency Ledgers (ALC Ledger) in R12.
    After 11i upgrade, the reporting SOBs (MRCs) will be automatically changed to ALCs in R12.
    Some are primary and some are used as reportingI hope you are talking about MRCs.
    When we upgrade from 11i to r12, all the SOBs would be created as primary ledgers (as per oracle)If they are not MRCs and it is getting upgraded as primay ledger, you may create new ALC for your requirement.
    In that case you may need a datafix from Oracle to fix the old data.
    By
    Vamsi

Maybe you are looking for

  • Nvarchar2 in oracle 8i and 9i

    Hi All, I am woking in 9i d/b and changed a column from varchar2(50) to nvarchar2(50) from 9i client. Now I am connecting to the 9i d/b from a 8i client and when i am doing desc of the table then the column is showing nvarchar2(150) but when I'm doin

  • How to make image out of panel?

    hi, i have a JPanel object and i drawn something on this panel. it also contains somemore components. can anyone say how to create image (like .jpg) from what is getting displayed in my panel. thankx in advance.

  • CONTROLLING TIME OF STILL SLIDES IN IMOVIE

    WHEN I TRY INSERTING A DESIRED TIME FOR A SLIDE IN "CLIP ADJUSTMENTS" THE RESULT IS NEVER WHAT I ENTER. IF I ENTER 2 SECONDS, FOR EXAMPLE, I'M LIABLE TO GET 6S. IF I EXPERIMENT GOING DOWN IN SECONDS, I GET ALL THE WAY TO .1, AFTER WHICH IT WILL GO TO

  • My macbook pro's iTunes can't sync with my iPad1

    Hi there, My MacBook Pro's iTunes can't sync with my iPad1. They are connected by cable and the Macbook and the ipad can find each other by wifi but that's it. The software seems to be upto date on both but im not sure as i can't find the itunes app

  • Skype automatic left group while calling or not.

    HELP! Been using skype but once after 6.18 release, skype has been automatic leaving conversion especially in group for no reason. It just kick me out of the group randomly but for 1 to 1 is fine.