Data Migration from CRM 5.0 to CRM 7.0

Hi Friends,
We are into a re-implementation on CRM 7.0. The old system was on CRM 5.0.
Since this is not an upgrade, the data will not copied over from the old system into the new system.
So, now I would like to know how to migrate data (master/transaction) from CRM 5.0 into 7.0.
I have read that we can make use of BAPI/LSMW/IDOC/XIF adapters to push info into CRM.
But, the customer wants all the historical data to be in the new system.
I think master data can be handled.... but how to migrate the transaction data?.... i mean the number ranges/document flow.. and other relationships.. how can we maintain the same links into the new system?
If it was a migration from legacy system into the SAP CRM, we could have gone ahead with new number ranges etc... but this migration is from SAP to SAP.
Also, we will have ECC6.0 connected to CRM 7.0. ANy additional things to be taken care of when the connection is live in DEV/QA/PROd instances?
Any pointers to this ?

Hi Gary,
As per my understanding, your data migration involves quite complex scenarios covering the CRM and ERP box. As the customer needs the old data to be present in the new implementation, the old data needs to be migrated from the CRM 5.0 to CRM 7.0. For the migration to happen, you need to setup the customization (like the number ranges,Condition Data Tables, etc ). Then only you can proceed with the data migration. Also, you need a proper backup plan as this involves proper backup of the data.
Once the setup is complete, you need to configure the ECC6.0 with the CRM7.0 system. Here also, you need to do a lot of settings and performing the Initial loading of the Adapter Objects. But before you proceed with the entire operation, the entire system landscape must be properly defined with appropriate settings.
My recomendation is to take help of SAP Consultants and data migration experts as they are the best persons to guide you on this. Also it would be great if you can go through the SAP Best Practices documents which are best repository documents to guide you on this.
Have a look on this link for an overview of the CRM Data Migration
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Hope this helps.
Thanks,
Samantak.

Similar Messages

Data Migration from CRM 4.0 to CRM 2007

Hi experts,
we have transaction data to be migrated from CRM 4.0 to 2007, the transactions are having followup transactions, how can we transfer the transactions along with follow up transactions to CRM 2007, can any one share the documents, i know it can be done with idoc meathod. can any one suggest what are the pre requisites and what is the role of CRM consultant here.

Okay the only question is that is your CRM 40 system and the CRM 2007 separate systems? If so then you can use the XIF IDOC adapter to setup the transfer between the two systems.
Now if the CRM 40 system is being upgraded to CRM 2007 then you don't have to "transfer" data.
As far as the CRM consultant role, you better understand basic IDOC setup and be able to do data mapping between the older and newer version. Luckily you shouldn't have a lot of mapping work as 2007 IDOC structure is a refinement of 4.0.
For more XIF information search the CRM general and framework forum.
Take care,
Stephen

Migrating from CRM 2011 on-premise to Online

Hi there,
We currently run CRM 2011 on-premise, we have 5 users and minimal customisations so far. We would like to migrate from On-premise to Online as we have this available through our Office 365 plan. Is there a migration tool available from Microsoft, or a manual
migration guide? We have searched for info online and can only find 3rd party tools that provide this function that are very pricey for such a small company.
Are we stuck doing this manually or is there a way?
Steve

For the migrating from CRM on premise to online has two parts:
1.Customization
You can export the total solution as following:
Go to Settings->Customization->Export Solution
Click Next->Choose what you want to export.
Click Next to export.
Then you can go to another CRM Online instance, go to Settings->Solutions->Import solution.
2. Data
For the out of box function of CRM 2011 Online, we does not support all data export one time. But we support all data export for one entity one time as following:
Let us take example that you want to export data for Account and Contact record types.
1. Create a view of all fields for the record type Account.
a. Go to accounts Grid and click on Create personal view
Click Edit Columns in the dialog that pops up and then click Add Columns.
Click the checkbox in the header to select all columns. (This will export data for all columns, some of which may not be importable)
Click ‘ok’ and then Click ‘Save’ on the Ribbon in Advanced find dialog. It will prompt you for name of the view .Provide the name for the view.
2. Navigate to view (Account) and Export the data in Static Excel format.
a) Go to Accounts Grid.
b) Navigate to Accounts view.
c) Click Export to Excel.
d) Select “Static worksheet with records from all pages in current view”.
e) Click Export and save the file. (Account.xls)(The records that are exported will be based on the record for which you had privileges).
f) Save the file in CSV /XML format from Excel. (Account.csv)
Wilson

Data transfer from CRM to R3

What exact data transfer from CRM to R3, on completion of a sales Order. I am new in the field, need some good example?

HI Sajjad,
Transafer of order from CRM to R/3 involves following activies.
Setup RFC destination between CRM & R/3
Create a R/3 Site (Transaction: SMOEAC) and assign a subscription named
(Sales Document (Mesg) created from publication Sales Document(Mesg)).
In R/3 maintain Document type with same name as Transaction type in CRM, item category with same name as item category in CRM, Item category determination with same as in CRM.
Master data i.e. Product in CRM should be present with same name as material in R/3. BP in CRM should be present with same name as Customer in R/3
Organizational data is maintained in CRM.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

Data Extraction from CRM to BW

Hi,
I just need some information/help on BW Data Extraction from CRM, it would be great if some one could help out or mail some related help documents.
Currently we are implementing the complaints module in CRM simultaneously on the BW side we have identified an info cube for complaints 0CSAL_C09, but this cube and its ODS source does not have all the required fields like (newly created text types, serial number etc), so how these tables and fields can be identified in the source system and added to extract structure in CRM. Also what is the table in which the CRM transaction data would be stored.
Especially i require the newly added text types in CRM to appear in BW, there are around 5 new text types are added and user can enter free text, i need these information to be captured in reports. kindly mail me the steps to [email protected]
Thanks
Akila.R

hi,
try these links
http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
this:
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
regards,
pankaj singh
reward if helpful

Data Extraction from CRM

Hello Experts,
I am presently working on data extraction from CRM system. I understand that there are three ways of data extraction from the CRM system:
i) Using Middleware integration
ii) CRM BI integration through XI
iii) Generic ETL process as used when extracting data from other SAP systems
Can anyone please suggest which one is the best method to follow and why?
Thanks & Regards
Nikhil

Hi,
The Third option is the best one I would say.
Why to use any other way line XI integration or anything like that which involves more complexity in terms of development , maintenance and most importantly COST. SAP is providing you the standard set of extractors, it will be a wise choice.
Regards
Pratap Sone

Data Flow from CRM to BW

Dear SAP Experts,
Greetings for the Day!
I am looking forward for some information on the Data flow happening from CRM to BW system. Some of the few queries are as below:
Do we have any settings for this data flow in Transaction SMOEAC.
How does the below setting impact the BDOC flow in BW. Also, if we un-check the “Do Not Snd”, will BDOCs
flow to BW system ? <PFA>
PS: We are on CRM 7.0 with EHP2.
Thanks!
Regards,
Kanika

Hi Kanika,
Data flow from CRM to BW happens via XIF using IDocs. You can check in transaction WE21 for your RFC destination of BW and the output parameters, which decides what data would be send to the corresponding destination.
You can also check my blog:
External Interface (XIF) Setup but this is XIF setup in general and not specific to BW.
Hope this helps.
Best Regards,
Shanthala.

Data Migration from 11i to R12 Global - Open POs,lines, receipts & on hand upload, Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines?

Hi Friends,
We are in a phase of data migration from 11i to R12
I was discussed with client & they wants extraction of all open POs which was generated after 01 Jan 2014 to till date in 11i.
Condition for open POs is PO qty-received qty=>0
critical Example for open PO is :PO no: 10 has 4 lines, 3lines full qty has been received & for 1 line partial qty(say 50 out of 100) received.
in this case he wants in R12 uploading as PO no:10 should entered as open PO with all 4lines & 3 lines complete receipt should be done, for 4th line partial qty i.e 50 should be received.
the question is if we upload on hand qty first, then open POs & receipts, it will increase the onhand qty in new system(mismatch of on hand qty's 11i to R12)
Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines.
Or Please advice best solution.
Thanks & Regards
Giri

adetoye50 wrote:
Dear Contacts Journal Support Team,
FYI, this is a user to user support forum. You are NOT addressing Apple here.
Honestly, I doubt anyone is really going to take the time to read the novel you have written.

Data Migration from 4.7 to ECC 6.0

Dear Friends,
We are doing upgration from sap4.7 to ECC6.0.
We have activated new gl. We have configured all ecc6.0 functionality.
But we stuck on data migration from classic gl to new gl.
We want to activate the migration cockpit but system is asking license key.
My question is, which license key it is?
From where we will get this?
Kindly don't send me any links and any documents related to ecc6 functionality.
Please guide us on this.
Thanks & Regards,
Reva Naik

Hi,
following link may give you some hints:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/9e4638a28b2763e10000009b38f8cf/frameset.htm
Regards
Bernd

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

AR & AP Data migration from legacy

Hi,
1.What are the precaution to be taken for Data migration from legacy system?
2.We intend to use a conversion ac ( Dr conv ac cr Vendor ) Is it Correct way of doing it ?
3.How do i ensure that all my invoices uploaded correctlt ?
4.What is the best Standard program to get it doen ?.
5.Is LSMW is best to do it or shall I have to go for custom development?
Any piece of yr advice is appreciated.
Thanks, Chitra

Hi Chitra,
Following link are helpful in understanding LSMW:
Note 105244 - LSMW 1.0: known problems, tips and tricks
Re: LSMW and error handling
/community [original link is broken]
For Data Migration:
Note 400257 - Data Migration and Upload Report
Note 739860 - Data migration from a legacy system to SAP
Hope this helps.
Please assign points as way to say thanks

Date Migration from IBM DB2/400 V4R3M0 to Oracle 11.2G

Dear ALL<
We have a requirement for Date Migration from IBM DB2/400 V4R3M0 to Oracle 11.2g. Can you guys please share your experiences with similar activities done in the past ? We do not have environment at present to try out with Oracle Migration workbench.
http://www.oracle.com/technetwork/topics/index-095746.html
You experiece sharing will really help ...!!
Regards,
VKMP
Edited by: 909016 on Jan 31, 2013 5:52 AM

Hi VKMP,
As well as reading the documentation thoroughly the following note available in My Oracle Support may be useful -
Problem To Migrate Table With Table Type P From DB/AS400 With OMWB (Doc ID 466271.1)
as OMWB does not support migrating physical files.
Regards,
Mike

Data Migration from R3 to new ECC System

Hello,
We are doing a fresh implementation for SAP MDM. Currently we have 3 SAP R/3 systems and 1 non-R3 system (BPCS system). One of the project goals is to do data migration from all these 4 systems into a new SAP ECC system and to MDM for Vendor Master, Customer Master and Material Master. My manager says that we need Business Objects tool to Migrate these data. But, my question is that is it not possible to achive this through XI/PI itself ? Can anyone let me know the entire process in XI/PI as to how do I receive the Idocs from R/3, convert into XML and then send it to the new ECC system in Idoc format ?
Thks & Rgds,
Hema

Hi Gandhi,
You have SAP MDM, BPC and R/3 systems in your landscape, when you are migrating data to new ECC system, what is the role of mdm, did you moving the same data to MDM to avoid duplicate/redundant data??is there any data migration from R/3 to MDM(any integration required)or MDM to R/3,
You have to develop different interfaces to transfer data from MDM to ECC, BPC to ECC.definelty you required one middleware, the option definitely SAP PI. it offers very easy of integration between MDM and R/3 system, you can use MDM-PI adapter to connect to directly MDM syndicator file port from there you can pull the XML file and convert it in to IDoc format use Receiver IDoc adapter in PI, the same way we can integrate BPC system with R/3.
Search in sdn, there are some scenarios integration of R/3 and MDM using PI, refer those links, if still you have any doubts let me know,
Regards,
Raj

Data Migration from 4.6C to ECC 6.0

Hi all,
Can you suggest me solution for data migration from 4.6C to ECC6.O which technique to be used!!
if you have the documents regarding the above post it which will be useful!!!
Thanks,
Yogeshwaran K S

Hi Yogesh
OS migrations are more or less painless beside the fact, that most "Unix" operating systems are using a different endianess (aside from Solaris on X86_64). For RFC and other SAP proprietary communication this is done in the kernel but if you use own software to read BINARY data (not talking about textfiles) you need to take care of that in your software.
Hope ths helps
Please reward points
Sunil

Data migration from 4.7 system to ECC 6.0

Hi All,
I am a Solution Architect. Currently working on a typical pursuit requirement. the requirement is as below:
One of our customer is currently on SAP 4.7 system. Their current system is shared by 2 companies & the companies got demerged now. Hence they are palnning for fresh ECC 6.0 implementation & migrating Master data & transactional data related to this customer from the current 4.7 system to ECC 6.0.
I am seeing possible way for data migration is through ALE or LSMW. But I am not confident about the execution plan & process.
I would wish to know from you people is:
1. The different methods to do data migration from 4.7 to ECC 6.0 with pros & cons
2. How to plan for data migration
3. Risks & mitigations during data migration
4. different kind of skill set & duration required to accomplish this requirement
Currently we are planning for 6 months for the ECC 6.0 core modules implementation.
If you have undergone this kind of project then request you to share your experience. Any information on this regard is appreciated.
Thanks & Regards,
Suresh

Hi
Go through eh below link for Best Practices
http://help.sap.com/bp_hcmv1600/HCM_US/HTML/master_data.htm
[Risk Factors|http://www.informatica.com/INFA_Resources/article_sap_netweaver_mag_data_migration.pdf]
[Different Methods|http://www.sap-img.com/general/what-are-the-methods-to-migrate-data-from-a-legacy-system-to-sap.htm]
[Best Practices|http://partners.netapp.com/go/techontap/NGS_migration.pdf]
Regards
Pavan

Data Migration from CRM 5.0 to CRM 7.0

Similar Messages

Maybe you are looking for