Data Not Aggregated properly in the visualization

Hi Experts,
I have created a Simple BO Explorer report with a few facets and the automatic measure 'Occurrences'. The Facets Panel shows proper data. But when I have the Visualize Panel open it shows a different result. I am not sure why this happens as I am new to BO.
Kindly check the screenshot to get a clearer idea.
Thanks & Regards,
Shreepad Patil

Hi Shreepad,
thanks for your reply. I thought it was HANA source. So this is a known issue with HANA or Explorer at the moment, I can reproduce the issue, and it seems to be a problem mainly for calculated columns. Still under investigation.  Is Region a calculated column?
If you trace the Explorer Exploration server and get the chart query (the smaller one in the log) and run it in HANA Studio you will see that HANA is also returning 1 for occurences. If you want you open a message with SAP.

Similar Messages

  • 21"imac 45 days old - 2tb drive has started not being recognized; receiving a "drive not disconnected properly", though the drive was never disconnected

    21"imac 45 days old - 2tb drive has started not being recognized; receiving a "drive not disconnected properly", though the drive was never disconnected

    That sounds like a hardware problem.
    Backup your data and contact Apple Support or your local AASP to make a service appointment.
    Apple - Support - Contact Apple Support
    Apple - Find Locations

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • My IPOD classic headport is not working properly.  The sound is going in and out?

    My ipod classic headport is not working properly.  The sound keeps going in and out.  I have tried changing headphones and checking the settings.  Does anyone have any ideas?

    Do a Hard Reset
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

  • XMP data not showing up in the custom file info panels when upgraded to CC

    For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
    1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
    2. Raw data is not visible in CC in the File info panel.
    3. This occurs in new documents where we create the xmp wrapper while the file template is built.
    4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
    5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
    Any feedback or a direction will be appreciated.

    I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
    in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
    is no longer the node that can be appended.
    Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
    <rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
    it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are  XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
    with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

  • My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks

    My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks

    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    Might be something from that link that will help.

  • Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

    Hello:
    Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

    Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
    Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
    Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
    There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
    The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
    Good luck,
    Hunt

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • HT1386 My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

    My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

    You need to update to 10.6.8 using Software Update.

  • I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just g

    I have a copy of Web Premium CS3 which was installed on a Windows Vista PC.  I have a new Windows 7 PC and the installation disc will not run properly.  The installation begins and then asks for the CS3 disc to be inserted.  If I re-insert the CD I just get a message asking for the disc to be inserted.  any ideas anyone?

    Use the download version:
    Download CS3 products
    Mylenium

  • Hi, My iPhone 4s does not work properly with the sound.

    Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

    Hi M3MB3R,
    Thanks for visiting Apple Support Communities.
    You may find the troubleshooting tips in this article helpful:
    iPhone: Sound muffled or low from the speaker or when speaking into the mic
    http://support.apple.com/kb/TS1631
    Cheers,
    Jeremy

  • The paint bucket tool is not working properly. The colors does not change, any suggestion?

    The paint bucket tool is not working properly. The colors does not change, any suggestion?

    Maybe on the wrong layer.
    It would be more beneficial if you capture your screen with the layers panel open and any layers that are collapsed, expand them.

  • Skrolu mouse does not work properly in the list of bookmarks

    skrolu mouse does not work properly in the list of bookmarks
    yer imleri listesinde maus skrolu düzgün çalışmıyor

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    You can also try to move (delete) the Firefox plist file.<br />
    See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]
    Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

  • HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    Have you tried calling Apple tech support?
    http://www.apple.com/contact/

  • Scrolling effects in Muse are not working properly with the Chrome browser at the moment.

    My scrolling effects in Muse are not working properly in the Chrome browser .I disabled any third party widgets to see if that was the problem but it wasn't. Safari and firefox presented my site perfectly but when it was opened in chrome the menu navigation bar will not stop moving uncontrollably jittering when the page is scrolled. Does anyone know what I can do to fix this? My site is danieltoruno01.businesscatalyst.com

    We are using Vertical spry menu bar features provided with Dreamweaver CS3.
    You are using Spry 1.4.
    The latest  version of the Adobe Spry Framework is 1.6.1, this is the same version  that ships with Dreamweaver CS4.
    When using Dreamweaver CS3 (uses Spry  1.4), it's wise to upgrade your files to the latest version. This can  easily be done using the Spry Updater that can be found here.
    If after that you still have problems, please come back here.
    Ben

Maybe you are looking for

  • How can I return my ipad 1 to pre OS5?

    how can I return my ipad 1 to pre OS5? Ive been reading the forums all over the place to find the solution to my ipad 1 continually crashing. it does it mainly in safari and the app store. Its really annoying when you're halfway through composing a l

  • Sort albums by descending year - itunes unable to play album

    I prefer my albums to be displayed in itunes with the latest albums first.  So I use grid view albums and set 'sort by' to 'descending'. When i select an album to play it will play the first track but the track numbers are ALSO in descending order an

  • Use of .png files in Photoshop

    I use Fireworks to create graphics using layers with each element on its own layer. When I send them to some companies, they state that a .png file cannot be edited by photoshop, and that the file has only one layer. Can anyone answer a few questions

  • H:selectOneRadio lacks

    Hi! I've got the following code: <h:selectOneRadio id="sortOrder" layout="pageDirection">      <f:selectItem itemValue="1" itemLabel="note" />      <f:selectItem itemValue="2" itemLabel="name" />      <f:selectItem itemValue="3" itemLabel="postcode"

  • Having a bit of a problem...

    All of my java apps are refusing to import outside public classes and thus cannot compile. If ANYBODY could help me out herre I'd be really thankful.