Data not coming in cube...

Hi,
I have loaded data in ODS but when loading the data from this ODS to cube it is not fetching any data in the cube. I have created the DTP to transfer data from ODS. but no data is coming in cube.
Any mistake I have to correct? or any setting I have to check?
Please let me know.
Thanks,
Jeetu

Hi Ravi,
I presed execute button from DTP in schedule tab.
It is showing DTP as green , no error is there.
But no records are loaded from ODS through DTP.
Thanks,
jeetu

Similar Messages

Nav.attr data is not coming in cube

Hi guys,
Nav.attr data is not coming in cube even though there is data in master data tables.

Hi Ajay,
In your case for the Nav Attr data to appear firstly load the master data where your Nav Attr resides and then do the apply hier/attr change for that master data.
Hope this helps.
Bye
Dinesh

SLED date not coming automatically

hi,
As per my client requirement they will enter the production date only in goods receipt and SLED date have to come automatically at GR time. I already maintain the Total shelf life and minimum remaining shelf life in material master.i activated SLED for plant and movement type but SLED date not coming automatically.
If i l enter SLED date more than my Total shelf life period , then system automatically updating the total shelf life period in batch master record. how to avoid this issue? i want whatever shelf life entered in GR should have to recorded not system calculated based on master data(Total-shelf life)
Thanks
Muthuraman.D

Dear all,
i am using internal batch numbers at the time of goods receipt provide me some solution for above issue?.....
Thanks
Muthuraman.D
Edited by: muthuraman d on Nov 7, 2011 12:18 AM

Data Not coming From DSO to Cube

Hi All,
I have data in DSO. When i run the DTP , request status is green.
Now when i go to cube and see the data the request has came but data has not transferred .....
The Request Status is green in cube but data is not cuming....
No transferred data.
How can bring data in cube..??
Regards,
Rohit

Hi,
When you loaded the DSO......after that are you loading the cube for the first time?If so .....and still data is not coming..then check if the last loaded request somehow got deleted from the DSO....
If after loading the DSO....you have already loaded the cube...and this is the second time you are loading the cube.........then obviously it will pick 0 records...........since delta DTP always picks the fresh new request..........if there is no new request in the source .......then it will pick 0 records.......
Also both the cased are not working.........then check the End routine or Start routine.if any.......
Thanks and Regards,
Debjani.......

(Request for reporting available) is not coming in Cube

Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

0vtype =20 (plan data) not populating to cube but present in psa

Hello Experts,
I have a requirement in BW 3.5 where in I need to create a report on multiprovider which should give the actual data,plan data and the difference between actual and plan data for some key figures.
The data flow is like this
There are two cubes one for actual and the other for plan ,I am able to get the actual data (10) for actual cube from R/3 .
But the problem is with plan cube,I am not able to get the plan data (20) to the plan cube (to the field 0vtype) ,but the data is coming till psa from R/3,there is no routine present in update rule also,but still data is not showing up for this 0vtype in plan cube...
I have tried loading selectively (020) by giving 020 as constant in the update rule..but still no luck
The datasource that is fetching plan data is 1_CO_PA_PLN1000.
Could you please suggest how to proceed further
Thanks,

HI Sashi,
Checking the mapping between the 0vtype and the source fiedls.
Check in transfer rules first if it is mapped or not.
Transfer rules are not mapped to source fields then correct it .
Hope this helps.
Regards,
Reddy

Data not coming from DOE to Mobile After defining Rule for device attribute

Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
Abhishek

Hi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w

Data not loading to cube copied from 0sd cubes

hello everyone,
wen ever im trying to load data from r/3 into a cube which is created by copying from a 0sd cube, everything is running successfully, info package, dtp, transformations and all, but when i look into the contents tab, it says this is not a basis cube, can anyone explain pls.
thanks in advance

Hi
Some one changed the settings of your cube from Basic cube to transactional cube ( real time infocube in IP)
Change it from transactional cube back to basic cube..This error will not come
Regards
N Ganesh

Data not updated to cube from DSO

Hi all,
We have a scenario where in the dtp from the DSO to cube does not write any data records to the cube, where as we are able to see 9 records when we debug the transformation which has a start routine. Could you kindly suggest what the issue can be ?
Regards
Snehith

I hope in your start routine you dont have anything with DELETE statement. Or the problem might be with Processing Key, check these links:
[Transfered records 475 added records 0 to cube.;
[Records are not showed in Info Cube;
[0 Record Loaded From ODS to Cube;
Regards,
Arminder Singh

Date not coming in proper format after applying formula in Update Rules

Hi All,
I have two time characteristics "Goods Issue date" and "Goods Return date" and One key figure "No. of days elapsed".
The key figure "number of days elapsed" is being calculated by taking difference of "goods issue date" from "goods return date", but the format for that is not coming proper for example:-
Goods Issue Date is 21.06.2006
Goods Return Date is 22.08.2006
According to formula No. of days elapsed shud be 62
but it is coming as 04.03.0001.
Please help as it is a urgent requirement.
Much Appreciated,
Sunil Morwal.

Dear Sunil,
Kindly check if creating 2 new KeyFigures (DATE) will be of help by assigning the said "two time characteristics" values.
From these 2 new KYFs, apply your formula..
Hope this helps..
Thanks.
Message was edited by: Arnold Padiernos

Data not matching in cube which gets from two DSOs

Hi All,
I have a requirement.
Cube gets from data from 2 DSOs.
In 1 DSO -
There are three fields which are mapped to one field in Cube
2 DSO--There are also similar type.
Like 4 fields in dso2 mapping to 1 field in cube
When the data is loaded into Cube,
the data is shown as split data like DSO 1 data and DSO2 data.
I want them combined.
Can anyone let me know what can I do to show as combined data.
Thanks In advance!

Thanks to both of you.
I am different characterstics in DSO1 and DSO2 to cube.
Ofcourse 1or 2 characterstics are common in both DSOs.
Employee LNum deptid frname compcode
12                               VBNM W123
13                                KNML   W145
15             345    K45
16             864    L89
So I am able to see as Split data.12,13 employee IDs are from DSO1 and 15,16 r from DSO2.
even if I give sam eemploee numbers also, same type of split data appears.
Please suggest tocombine both DSOs data in the cube.
Thanks In advance!

Data not coming to BW from SAP system from last 7 days....please help

Hi Experts,
I am monitoring the process chain from last 7-8 days but no data is coming to BW from SAP R/3 . then i checked in SAP R/3 system in RSA7 there weree no queues it was empty. then i checked LBWQ and some MCEX03,MCEX11,MCEX13,MCEX04 were there and i double clicked on one of them then i saw the status in queue as NOSEND . we have used QUEUED DELTA as update mode in LBWE. now i want to bring data for last 7-8 days in BW system. please can anyone provide me the detail steps for this as it is our PRODUCTION system. please provide the steps...!!!!

Hi,
Go to SM37 in your R/3 environment and check if there are any jobs starting with LIS* in released status. This is the job which would push the entries from LBWQ to RSA7 for specific applications. If there are no jobs, this is the reason for your problem.
If you do find any job there, then double click on them to check their frequency. Generally it should be hourly.
If there is no such job, then go to LBWE. For each of your applications, click on Job Control and maintain the job scheduling. In the start date, maintain it as periodic job. Then simply schedule teh jobs. Once the jobs are scheduled, after every run of them, LBWQ would get cleared.
Then it would get picked from RSA7 by the BI job.
Edited by: Rahul K Rai on Dec 8, 2010 4:00 PM

Data not loading to cube

I am loading a cube from a cube. There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube. There is no delete in start routines.
Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
The load I am making is full repair
Can someone assist
Thanks

Hi Akreddy
I am not sure "Repair full to Cube"...!
Still the following is my opninon abt your issue...
It seems there is some miss map ..Just one quick check in the DTP monitor in which step your getting 0 records . Is it Data package level or transformation level or routine level..
Identify the step where the transfered records is nullifying then dig through the step..or post the waning or message in this forum so that its pretty easier to get answered..
Hope its clear a little..!
Thanks
K M R
"Impossible Means I 'M Possible"
Winners Don't Do Different things,They Do things Differently...!.
>
akreddy wrote:
> I am loading a cube from a cube. There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube. There is no delete in start routines.
>
> Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
>
> The load I am making is full repair
>
> Can someone assist
>
> Thanks
Edited by: K M R on Aug 16, 2010 2:01 PM

Data not coming in proper tabular format - BICS

Hi friends,
I tried connecting Xcelsius with BW(BEX query) where I succeeded to connect both system and was able to see objects coming through BEX query into Xcelsius connection defination TAB. When I go to its output values, it contains "cross-tab Data". I clicked on it and map it in excel. My BEX query has only two things one is Material (Char) and other is Amount(Key Figure). So I mapped it with two colums of excel of Xelsius and finally mapped those two colums with Spreadsheet component of Xcelsius to view the things precisely as it is coming.
But the problem is when I see the output, though it is showing the data but the header of the spreadsheet is bit scattered.As in,
it should display like:
Material.....|...Amount..|
Mat1..........| 5000........|
Mat2..........| 2000........|
But it is showing something like
Key Figures...|...Amount....|
Material.........................|...........................
Mat1..............................| 5000........|
Mat2..............................| 2000........|
Overall Result...............|..7000.......|
You can see the second table contains data which is really different from the format I am looking for. What could be the reason for this? Anybody can guide me..
Thanks alot!!

Hi kgaurav2k1, if you don´t want to see the "Overall Result" you need to change the query definition to not show total (from Bex Query Designer). Regarding the header, I´ve never could change it, and decided to use the data from the 3rd row. It is the format for a cross-tab header.
Hope I help.
Regards,
Liliana

Data not coming in web report

Hi,
I have created a multiprovider based on two cubes...have done neccessary identification and selection as well. But the query->web report is not displaying data from one cube. It only displays data for char n kf for one cube and the char n kf for other cube dosent show any data. Also, there are no filters set in the query and data is also available in both the cubes.
Can anyone please suggest what must be going wrong. Your help will be surely rewarded.
Regards,
Minal

but check if there are any global filters or hidden filters in query used for web reporting
i donot want any reward

Data not coming in cube...

Similar Messages

Maybe you are looking for