Data not getting transffered from SRM system to BW
Hi All,
We have an issue where in the data is not getting transferred from SRM to BW. If i see in RSA 3 of SRM system, the datasource is pulling around 3000 records and in WE02, the idoc is generated and passed without any errors.
Whereas in BW the idoc is coming with code 8 and no data is getting transferred to BW.
What can be the probable reasons for this mismatch ??
Thanks
Abhi
Hi Abhi,
After an upgrade, i would go for following checks
1. Check the Data Source on CRM side and check if it is Active.
2. With Upgrade, usually DataSources become inactive and also, pls check if any required fields are hidden in the data source before you activate.
3. After unhiding required fields, i would activate the Data Source and Replicate the Data Source on BI Side.
4. Now I would delete the failed request by forcing its status to RED in RSMO and then go for the load.
Let me know if it worked.
Similar Messages
-
Baseline date not getting populated from SRM invoices posted to ECC 6.0
Hi,
We are currently in ECC 6.0. The SRM system is in 4.0. We have this particular problem that the baseline date is not getting populated from the Invoices posted from the SRM. The baseline date is blank and the document is saved.
Did anyone face the same problem??? Can you please refer SAP note 541934 and expand........
Thanks
Aravind
Edited by: Aitipamula Aravind on Aug 10, 2009 5:13 AMHello,
Yes, you could check the attached note 541934 and regard the implementation of the field ZFBDT in the invoicing document.
Note 541934 provides a solution how to achieve the MM-customizing for payment baseline dates getting effective for invoices with SRM-origin. This note needs to be applied at your ERP-MM-side in the former plug-in-layer. As described in the note, this is a modification. It's recommended to apply in non-productive system first.
Hope the above infor.are helps for you!
Best Regards,
Gladys xing -
Data not getting fetched from Quotation to Contract
Hi,Myself new to TM. I have a ticket mentioning data not getting fetched from quotation to contract. How to solve it? Please help...
Message was edited by: Michael ApplebyPlease add the version of the TM product and which SPs have been installed. Also more information on the quotation and contract.
What do you mean by ticket? It you mean an error message, from where are you reading the message?
Regards, Mike
SAP Customer Experience Group - CEG -
PO is not getting released from SRM
Dear Experts,
I am configuring SRM-SUS Scenario on SRM 7.0. I have set up all SRM, XI and SUS cofiguration.
(SRM - SHDCLNT901, XI - XHDCLNT500, SUS- SHDCLNT951)
Shopping Cart and PO is creating fine but PO is not tranferring from SRM to SUS.
when i checked SXMB_MONI in SRM, there is no messeges showing there. It means PO is not getting released from SRM.
Kindly let me know is there any t-code for enable communication between SRM and SUS?
I have correctly configured XI and also transferred vendors from SRM to SUS through SupplierPortalTradingPartner_CreateOrChange_Out messege type but
PurchaseOrderRequest_Out for PO transfer is not getting triggered in sxmb_moni in SRM.
Thanks in advance.
Regards,
Pawan KeshwaniHi,
Thanks for your reply.
I have configured Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
(CCMS monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
I am configured ESOA Architecture in XI for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
Not getting any messege in SXMB_MONI in SRM.
Regards,
Pawan Keshwani -
Billing Plan Data not getting copied from Contract to SO
Hi ,
I have a Business requirement in which i ham supposed to create a Contract and then release/sales orders with reference to this contract. Whle creating the SO, the header billing plan dates are not getting copied from COntract to Sales Order.
Please guide me on how can this be done.
Regards,
MadhavHi,
plz check your copy controls VTAA from contract to release order ,under the contract item category there is Field-FPLA check what is the routine that is assigned.
you can either use routine-401 or 402 -
All Data not getting viewed from one user
Hello,
I have created a user named "ABC" in SAP and have given full authorization to that user.
But while logging through that user and viewing the Sales Order all data are not viewed through the form as i haven't
defined Data Ownership for that user but still i am not able to view all data from that user login.
Please suggest what i have to do view all data from that login.
Thanks & Regards,
AmitHello Amit,
Data ownership authorization would not be override by general authorization. If this user has not been assigned for data ownership authorization, the sales order may not be available to the user.
Thanks,
Gordon -
Data not getting transferred from LBWQ to RSA7 - LO(Purchasing)
Hi Gurus,
Please advise.
We have queued delta method in our purchasing set-up. Iam running job control (LBWE). The job getting finished, but I do not see data comming into delta queue(rsa7), the records are still available in LBWQ. Please help...
Thanks
Syed.I had the same problem. For me datasources 2LIS_11_VASTI, 2LIS_11_V_SSL, 2LIS_11_VAITM were not pulling records when I ran my loads in BW. The runtime of LIS-BW-VB_APPLICATION_11_200 kept growing as well.
Anyways my solution was found in SAP NOTE: 728687. I suggest you check that one out. At the very bottom of the note is SOLUTION 2. This was the solution that I used.
Let me know how you do!
Thanks,
Nick -
Stock value is not getting updated in APO system From ECC automatically
Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PMHi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram -
Profit Center not getting copied from WBS master data to settlement rule
Hello,
I am facing issues during settlement to G/L. From FI side we have set up some validations that the FI postings shld always carry a Profit Ctr. Now when I am doing settlement to B/S account, the profit ctr from WBS master data gets copied to settlement details and hence on FI posting (Credit line).
However when I am trying to settle to Expenxse/P&L account this is not happening. The profit Ctr is not getting copied from WBS master data to Settlement details and hence the settlement is not going thru. The profit derived is a dummy profit ctr and not the one on WBS master data.
I have posted this query on FI forum too but no satisfactory answers.
Pls let me know, what is the system behaviour....will the prof ctr on WBS master data gets copied on settlement rule details automatically ?
SarangWhich exit do I use in OPSN? any thts or some exit in FI?
I am on ECC-6.0...
One thing to mention, the prof ctr is getting copied to settlement rules for Balance sheet account but not for P&L.This is more confusing...
Sarang -
Validity end date is not getting copied from inquiry to quotation.
Hi Friends,
While creating quotation the validity end date is not getting copied from inquiry to quotation.
What setting needs to be done, pl suggest.
Regards,
Hari.Sreehari,
i dont find any logic of having Same validity date for Quotation and Inquiry....
the simple reason is explained by example: Say you have created Inquiry on 1st november and end date is 15th novembr. Customer comes to you on 14th november and asked for Quotation, and if you refer quotation on that day that means its only applicable for one day, which generally wont be the case.
There is no option for copying the validity dates from Inquiry to Quotation as per standard. If you want, create routine, place it in copy control.
Thanks,
raja -
Purchase Req & Standard PO - Price is not getting Defaulted from Price List
Dear All,
Hope you are doing good!!!
We are implementing R12.1 for one of our client. This query is pertaining to the Advance Pricing with Purchasing. Infact client wants to default the Purchase Requisition and Standard Purchase Order Price from Price List.
I have done entire setup and defined ASL for this reason. But still price is not getting defulted from Contract Purchase Ageerement.
What could be the reason. Its an standard fucntionality but still its not picking up.
I would really appreciate if someone could help me on this. Its URGENT.
Thanks in Advance.
Thanks & Regards,
AdityaLet us go through the steps involved in integrating Advanced Pricing with Purchasing so that we know if we have missed anything.
1. Create Price Lists in Advanced Pricing.
2. Setup Profile Options in System Administrator responsibility:
QP: Licensed for Product - at Application: Purchasing level = Purchasing.
QP: Pricing Transaction Entity - at Application: Purchasing level = Procurement
( Site level - ‘Order Fulfillment’ )
Profile option can be set at site, application, and user levels.
QP: Source System Code – at Application: Purchasing level = Oracle Purchasing
( Site level -- ‘Oracle Pricing’ )
Profile can be set at site and responsibility levels.
QP: Item Validation Organization - at Application: Purchasing level = null
( Site level -- specified in Financial Options )
Profile option can be set at site and responsibility levels.
3. Add item to the Price list Advanced Pricing ->Price Lists -> Price List Setup.
Enter the item/price/dates etc.
4. Create Contract Purchase Agreement.
5. Create Approved Suppliers List. In the Source Documents, select the Type as Contract and reference the Contract Agreement Number.
Create the Sourcing Rule and add the Rule to the Assignment Set.
6. Create the Standard Purchase Order referencing the Contract Purchase Agreement in the Reference Documents.
The Price listed should be defaulted from the Price Lists.
Cross-Check the following steps and let me know if it still fails and we can try to resolve from then on :) -
CRM Sales Order Not getting transfer to ECC System
Hi,
We had created one sale order in CRM and created sale order is not getting transfer to ECC system. BDOC are ending into error status and following are the error which is getting generated
ERP adapter is called
item is not to invoice0000000010
Service that caused the error: CRM_1O_DELTA_MOB_MBDOC_SRV
We had cross check the item category in CRM and ECC system and it seem to be fine.
We had tried opening the document and it is gettinh opened suceesfully also.
In case if any one had face this issue then please let me know the solution step to get this issue resolved.
With Regards
Ankush Rai
9423404043Hi Anukush,
To replicate a sales order from CRM to ECC you should have following prerequisties.
1. Master Data: Customer, material should exist in both the system
2.Organization Structure like Sales Org, Division, Distribution Channel (Sales Area) should exist in both the system
3.Same Document Type,Item Category, Item Category Determination should exist in both the system
4.Same Number Range should exist in both the system
Best Regards,
Rajendra Sonawane -
Dispatcher yellow,J2EE status info unavailable,Could not get file from DB
Hello Experts,
I have successfully installed a ECC 6.0 server-ABAP +JAVA system (DB2 v9.5 FP4 windows server 2008-x64 bit).
Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
I already tried Notes 784568 and 997510
Relevant logs:-
jvm_bootstrap.out
=================================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
Attempt to fully materialize lob data that is too large for the JVM.
Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
==============================================================================================
dev_jcontrol
=============================================================================================
Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c 913]
[Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c 1749]
[Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 273]
[Thr 4360] JControlCloseProgram: started (exitcode = -1)
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
=================================================================================================
log_bootstrap_ID0140026.0
==========================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
============================================================================================
Eagerly looking forward to a solution from you experts..
Thanks,
RakeshHi,
I am facing the same related problem with ECC 6.0.
My dispatcher started it is showing yellow- dialog queue standstill, J2EE status info unavailable
after some time dispatcher has stopped.
Please check my below trace file for dispatcher:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid DEV
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 114
intno 20050900
make: multithreaded, Unicode, optimized
pid 13108
Fri Nov 27 02:31:55 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 114 successfully loaded
shared lib "dw_xtc.dll" version 114 successfully loaded
shared lib "dw_stl.dll" version 114 successfully loaded
shared lib "dw_gui.dll" version 114 successfully loaded
shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
Fri Nov 27 02:31:59 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapdev_DEV_03 <
DpShMCreate: sizeof(wp_adm) 15800 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 08290040, size: 4889440)
DpShMCreate: allocated sys_adm at 08290040
DpShMCreate: allocated wp_adm at 08292090
DpShMCreate: allocated tm_adm_list at 08295E48
DpShMCreate: allocated tm_adm at 08295E78
DpShMCreate: allocated wp_ca_adm at 0869F2B8
DpShMCreate: allocated appc_ca_adm at 086A5078
DpShMCreate: allocated comm_adm at 086A6FB8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 08727E78
DpShMCreate: allocated gw_adm at 08727EB8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 08727EE8
DpShMCreate: allocated wall_adm at 08727EF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Nov 27 02:32:00 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 13356
argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2919
argv[5] = -DSAPSYSTEM=03
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=sapdev_DEV_03
argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >sapdev_DEV_03 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Nov 27 02:32:01 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Fri Nov 27 02:32:05 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Nov 27 02:32:40 2009
ERROR => W0 (pid 13364) died [dpxxdisp.c 14441]
ERROR => W1 (pid 13372) died [dpxxdisp.c 14441]
ERROR => W2 (pid 13380) died [dpxxdisp.c 14441]
ERROR => W3 (pid 13388) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 13396) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 13404) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 13412) died [dpxxdisp.c 14441]
ERROR => W7 (pid 13420) died [dpxxdisp.c 14441]
ERROR => W8 (pid 13428) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W9 (pid 13436) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W10 (pid 13444) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:50 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Nov 26 21:02:50 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 13364 Ended no 1 0 0
1 DIA 13372 Ended no 1 0 0
2 DIA 13380 Ended no 1 0 0
3 DIA 13388 Ended no 1 0 0
4 UPD 13396 Ended no 1 0 0
5 ENQ 13404 Ended no 1 0 0
6 BTC 13412 Ended no 1 0 0
7 BTC 13420 Ended no 1 0 0
8 BTC 13428 Ended no 1 0 0
9 SPO 13436 Ended no 1 0 0
10 UP2 13444 Ended no 1 0 0
Dispatcher Queue Statistics Thu Nov 26 21:02:50 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu Nov 26 21:02:50 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Nov 26 21:02:50 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:55 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapdev_DEV_03 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (13340) (SOFT_KILL)
Stop icman
killing process (13348) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:13340 HANDLE:1564)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:56 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:13340 HANDLE:1564)
wait for end of icman
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:57 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:58 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:59 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Please help me to start my SAP MMC.
Thanks -
Team view data not getting refers for some user
Hi,
We are facing an issue in team view app for mss, manager's are seeing details of employees not belonging to their Org Unit/ data not getting refreshed. This seems to be the Cache related issue where the data of perviously logged in user is displayed to the current user till browser cache are cleared manually.
User don't have permission to clear browser cache. Is there any work around.The issue is coming only for some users.I have enable the 'ABAP HTTP Security session Enabled' property of the system used.
Regards
PallaviHi Karthik,
in the first view I execute the BAPI and in the second view I show the results. In the second view I also submit the modified data via another BAPI.
As I execute and display result of same BAPI in two different views I have bound the same model node to both of these views. Let me give you some sample code for understanding what have I done.
In the first BAPI's search action handler I have written:
Zsr_Packnr_Validate_Components_Input input = new Zsr_Packnr_Validate_Components_Input();
wdContext.nodeZsr_Packnr_Validate_Components_Input().bind(input);
input.addT_Version(new Zsr_Packnr_Field_Values());
input.addT_Zsr_Genbr(new Zsr_Packnr_Field_Values());
input.setZsr_Gmc(globalMaterialCode);
input.setZsr_Mrc(mrc);
input.setZsr_Ctry(country);
input.setZsr_Dc(distributionChannel);
input.setZsr_Div(commercialSegment);
wdContext.nodeOutput_Validate().invalidate(); //as u suggested
wdContext.currentZsr_Packnr_Validate_Components_InputElement().modelObject().execute();
wdContext.nodeOutput_Validate().invalidate();
In the second BAPI I just display the output node from the same Model context node (its mapped to the second view too).
But as I said whenever I update some values in the result set and submit it the data gets submitted properly. But when I press the search button again, the previous set of data gets populated, not the just updated data.
If anybody has some idea on why the second time search BAPI execution still shows the previous set of result it will be a great help to me.
Thanks for all your help.
Shubhadip -
How to connect from SRM system to Punch out Catalog
Hi all,
I would like to know connecting from SRM system to Punch out Catalog , do we require XI inbetween??
Regards
VamsiHi Vamsi,
There is an XML variant of the OCI interface as described in the OCI documentation attached. Using this you can use XML documents instead of plain HTTP for the OCI transfer. No specific configuration is required as a transformation agent is contained within the FUNCTION bbp_ws_mapoci_to_sc
map xml to oci structure
CALL FUNCTION 'BBP_WS_DISPATCH_XML_MAPPING'
EXPORTING
iv_xml_type = iv_xml_type
iv_xml_document = iv_xml_document
TABLES
et_oci_items = et_oci_item_data
et_longtext = et_oci_longtext
EXCEPTIONS
xml_mapping_error = 1
OTHERS = 2.
In this xml mapping function we use a CALL TRANSFORMATION to perform the XML -> OCI mapping:
Transfrom OCI XML data via XSLT to RFC structures
TRY.
CALL TRANSFORMATION bbp_oci_xml_to_rfc
SOURCE XML IV_XML_DOCUMENT
RESULT sc_items = lt_sc_items.
CATCH CX_ROOT INTO lr_exception.
CATCH cx_xslt_runtime_error.
RAISE xslt_failure.
ENDTRY.
ENDIF.
Put mapped data into export strutures
LOOP AT lt_sc_items INTO wa_sc_item.
IF NOT wa_sc_item IS INITIAL.
Hopefully this clarifies the possibility of using the XML variant of the OCI.
Regards,
Jason
Edited by: Jason Boggans on May 13, 2009 6:54 PM
Forgot to attach the document
Maybe you are looking for
-
Problem with Photoshop CS4 after migration to new Mac
I just migrated from an old Mac to a new Macbook Pro running Mavericks. I'm having a problem with Photoshop CS4. Specifically, two things: 1) When I open an image in Camera Raw, I get this error: Fatal error - missing component /Library/Application S
-
Problem in BEx analyzer output in BI dev and BI Quality
Hi All I am facing a problem in BEx analyzer output in BI Dev and BI Quality server where the query is make on BI infoset. When i am executing the query in BI dev server then it is giving the output result but when i tried to executing the BI query i
-
Does Fireworks CS5.5 come in 64 bit format?
Background: I was just setting up Acrobat X Pro to use Fireworks as its graphic editor, instead of Photoshop on my win7 64 bit machine. I looked in the Win 7 Program files where all the 64 bit programs are found, only to find that there were no Adobe
-
Hi guys Trying to run this package on SQL 2012 agent and getting below error . No more details I could find so far. The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed. Abou
-
States of EJB in replication mode
During in memory replication in a cluster, is the replicated EJB active? Is the replicated EJB in the "Passivate" State, "Active" State or "Bean not in existence" State? Appreciate your prompt response. Thank y