Data of one group not getting displayed (in rtf template)

Hi
We have build one rtf template it has 2 sectrions one is main section where data is being displayed with out any issues.
where as for Sub section data is not getting displayed though there is data in xml file
1) Main section
<?for-each@section:G_ORDER?>
<?for-each:G_PART_NUM?>
data in this porting is getting displayed
<?end for-each?>
<?end for-each?>
2) Sub section at the end of page
<?for-each:G_SCH_SCH_B?>
data in this portion is not getting displayed
<?end for-each?>
Regards
Kamalakar.G
Edited by: kamalakarg on Jul 13, 2012 8:47 PM

Please, post sample XML and desired output.

Similar Messages

  • Data source 2LIS_03_BX is not getting displayed in LBWE

    Dear All,
      I was trying to extract MM data sources in R3 , I activated 2LIS_03_BF, 2LIS_03_BX ,2LIS_03_UM in RSA5 .After tat wen i tried to activate this data sources in LBWE only 2LIS_03_BF, 2LIS_03_UM are displayed under inventory.
    please let me know how to get 2LIS_03_BX  in LBWE
    Regards,
    Dippy

    You wont find data source 2LIS_03_BX in the LBWE screen.
    We use this data source as a one time activity. you can directly activate the data soruce using the transaction RSA5 and delete the set up tables and fill the set up tables and initialize to extract the historical stock data.
    2LIS_03_BX is not part of LO cockpit, hence you will not see them in LBWE. Pls use transaction code MCNB to load the setup table before you load data into BI.
    rest of the data source you use OLI1Bw and OLIZBW to load the set up tables for BF AND UM.
    Regards
    KP
    Edited by: prashanthk on Oct 5, 2010 5:33 PM

  • In produstion one window in smart form is not getting displayed

    hello everyone,
    i had created one smartform report,
    its getting executed on development,
    but on production only one window not getting displayed,rest of the windows are displaying.
    can you give me some suggestions so i can make changes in smartforms.
    thaking ya
    chitra

    First check for window conditions
    which window is not displaying secondary window or copies window or Final window or address window
    and tell me the clearly

  • Default Value is not getting displayed in SUN ONE Ldap

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
    We need the default value to run our applicatin. Can anyone help me for this issue
    Regards,
    K. Senthil Kumar

    Hi anandkumar,
    I belive this issue can be resolved by changing the  Query proprties for the perticular field.
    Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
    __Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
    FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
    Hope this helps you!!
    Best Regards,
    Maruthi

  • Data is not getting displayed after Exception,mysterious cause?

    Hi, Good Afternoon all,
    I'm Kittu. I have got a peculiar problem(it seems peculiar atleast to me) in my application, i donno whether it is programmatic error or problem with the environment that i'm using.
    In my application,I'm using java with NetBeans 5.5.1(Server being Tomcat). Problem is : once I get certain kind of exceptions in 'Bundled Tomcat(log)' window of Netbeans output, all the data and content that generally gets displayed in 'Bundled Tomcat' window of NetBeans output.(Note that these two are different windows) , gets erased and no more displaying is happening. Dont know what must be the problem. Please, if anybody knows the cause of such situation, DO RESPOND. I'll be waiting for your replies.Thanx in advance.
    ---Kittu.

    It's likely what'd confusing you is the way Netbeans automatically switches between tabbed windows in the Output area at the bottom of the window.
    There's a variety of windows to look at (especially when running a server), but it only shows one at a time, and will switch to the one with the latest output. To see the window you were previously looking at you'll have to switch back by clicking a tab.

  • Table PA0045 is getting updated but data is not getting displayed in Infty

    Hi,
             When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
              But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
    Regards,
    Jyoti

    Check if there is proper data to be shown in the tabstrip.
    EX.. Loan Amount Granted in the Tabstrip Basicdata ...

  • Group Headers are not getting displayed in crystal report

    Hi,
    I have got 1 reprot having 8 subreports in it. In the parent report I group by 2 different fields. I have created 8 diff. sections under 2nd group and put every subreport in different section. The data in subreport gets displayed depending on the parameters selected by user.
    Sometimes the group headers get displayed. Most of the time when I add only 1 subreport. As & when I add 2 or 3 it disappears.
    Can any body guide me in this issue.
    Thanks a lot...

    Deepa,
    Your issue might appear due to the sub report not being able to grow.
    This can be done by right-clicking on the sub report and select 'can grow' on the general tab of the properties.

  • Data is not getting displayed in the report from an Infoset.

    Hi All,
    I am having a report  based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
    While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
    Could anyone please suggest why the data is not getting displayed in the query designer.
    Thanks & Regards,
    A.V.N.Rao

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • Master data is not getting displayed in the Query Designer

    Hi,
    I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
    The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
    I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
    The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
    Hope its clear.
    Please help.
    Thanks

    Hi,
    I have brought the Emp. No. in the Key Field and also have activate the master data again.
    Yet my Query Designer doesn't have the Emp. No.
    I have done a full load for both Master and Transaction.
    Please advice me what the other alternative.
    Thanks

  • Form not getting displayed in sap b one

    I have created a form using screen painter.But it is not getting displayed in sap b one.When I debugged the form it doesnot show any error.

    Option Strict Off
    Option Explicit On
    Friend Class frmEmployee
        Private WithEvents SBO_Application As SAPbouiCOM.Application
        Private objForm As SAPbouiCOM.Form
        Public Sub New()
            MyBase.New()
            '// set SBO_Application with an initialized application object
            SetApplication()
            LoadFromXML("frmEmployee.xml")
            'LoadFromXML("MySimpleFormxml")
            '// Get the added form object by using the form's UID
            objForm = SBO_Application.Forms.Item("F_4")
            '// Show the loaded Form
            objForm.Visible = True
            '// Saving the Form as an XML file
            '// although it already exist as an XML file
            '// it is good for practice
            'SaveAsXML(objForm)
        End Sub
        Private Sub SetApplication()
            '// Use an SboGuiApi object to establish connection
            '// with the SAP Business One application and return an
            '// initialized appliction object
            Dim SboGuiApi As SAPbouiCOM.SboGuiApi
            Dim sConnectionString As String
            SboGuiApi = New SAPbouiCOM.SboGuiApi
            '// by following the steps specified above, the following
            '// statment should be suficient for either development or run mode
            sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
            '// connect to a running SBO Application
            SboGuiApi.Connect(sConnectionString)
            '// get an initialized application object
            SBO_Application = SboGuiApi.GetApplication()
        End Sub
        Private Sub LoadFromXML(ByRef FileName As String)
            Dim oXmlDoc As Xml.XmlDocument
            oXmlDoc = New Xml.XmlDocument
            '// load the content of the XML File
            Dim sPath As String
            'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
            sPath = "D:\Final\Forms"
            oXmlDoc.Load(sPath & "\" & FileName)
            '// load the form to the SBO application in one batch
            SBO_Application.LoadBatchActions(oXmlDoc.InnerXml)
        End Sub
        Private Sub SaveAsXML(ByRef Form As SAPbouiCOM.Form)
            Dim oXmlDoc As Xml.XmlDocument
            Dim sXmlString As String
            oXmlDoc = New Xml.XmlDocument
            '// get the form as an XML string
            sXmlString = Form.GetAsXML
            '// load the form's XML string to the
            '// XML document object
            oXmlDoc.LoadXml(sXmlString)
            Dim sPath As String
            'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
            sPath = "D:\Final\Forms"
            '// save the XML Document
            oXmlDoc.Save((sPath & "\frmEmployee1.xml"))
        End Sub
    End Class

  • Data not getting displayed in query

    Hi
    I have master infoobject with keyfigure units as percentage, and data is loaded and working fine.
    data is not getting displayed in query, i am getting the error message, that exception aggregation has to be maintained for 0calday.
    how do i resolve the issue
    Regards

    solved

  • SUN ONE Ldap - Default value is not getting displayed

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
    Can any one help me in this for this issue.
    Regards,
    K. Senthil Kumar

    I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.

  • Data carrier & application field are not getting displayed in CV04N

    Hi Guru's
    In TCode : CV04N,  data carrier & application field are not getting displayed.
    While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
    Let me know is there any configuration that has been missed out.
    Regards
    Bhanu

    Hi Bhanu,
    Please note that the fields 'Data carrier' & 'Application field'  are visible only if no document type is entered.
    Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
    Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
    Regards,
    Pradeepkumar Haragoldavar

  • Adhoc Query data not getting displayed on Portal

    Hi,
    I have a problem with custom Adhoc query data not getting displayed on the portal.
    It was getting displayed initially but after a user made some changes to the query its not getting displayed.
    The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
    Can anyone help me on this.
    Also if anyone can tell me how do i debug an Adhoc query from potal.
    Is there any tool to debug an Abap program from portal.
    I dont want to use trace,
    Thanks
    GT
    Message was edited by: GT

    Hi GT
    find out the EXACT query u want to launch if it's display
    in BW buisness explorer then change the iview property
    for that query in portal . right click on iview
    BEx Web Application Query String -> assign correct query
    regards,
    kaushal

  • Need to display data from one group while in another repeating group

    I have a repeating group in my .rft file which displays line level data that has a quote number in it.
    At the end of this repeating group I need to display the total for the quote number but these values are in another group that's within a differnt group higher up in the XML tree. Both of the groups have quote number so there is a link between the two. How do I do this? When I add the "higher up" repeating group within the current group I can't get any data to show. Any help would be appreciated.
    Kind Regards

    Here's the data, I do know how to to move up the tree like a file system but I think my problem is I need to move up the tree and repeat based on the value (quote number) of the lower node.
    For instance for each quote number in repeating group G_FORX_OPS_QTE_ORDER_LINES loop through the occurances of same quote number in G_OPPCAT_BREAKDOWN so I can get a total of the fields by quote number
    This is overly simplified but it would be like this
    <?for-each-group:G_FORX_OPS_QTE_ORDER_LINES;QUOTE_NUMBER?>
    quote number 1428
    various line level data....
    various line level data....
    etc....
    -- Open loop to get data from other group (Only get data for quote 1428!!)
    <?for-each-group:/FORX_AS_OPPOR/LIST_G_OPPORTUNITY_SHEET/G_OPPORTUNITY_ID/LIST_G_OPPCAT_BREAKDOWN/G_OPPCAT_BREAKDOWN;./QUOTE_NUMBER1?>
    Total For Quote 1428
    Billing Class
    BILLABLE: Billable total in dollars
    INTERNAL: Internal total in dollars
    <?end for-each-group?>
    <!-- Generated by Oracle Reports version 6.0.8.26.0
    -->
    - <FORX_AS_OPPOR>
    - <LIST_G_OPPORTUNITY_SHEET>
    - <G_OPPORTUNITY_ID>
    <COMMENTS1>Opportunity Includes Quote Number(s): 1428-2 1443-1 1444-1 Order Number(s): 159038-10 159044-3</COMMENTS1>
    <CUSTOMER_ID>1183</CUSTOMER_ID>
    <UPDATED_BY>CTYNER</UPDATED_BY>
    <DEPOSITS>5704.68</DEPOSITS>
    <OPPORTUNITY_ID>1000216</OPPORTUNITY_ID>
    <OPPORTUNITY_NAME>1000216:UAT DEMO</OPPORTUNITY_NAME>
    <CUSTOMER_NUMBER>103736</CUSTOMER_NUMBER>
    <ENTITY>FSG</ENTITY>
    <SOLD_TO>ALLSTATE INSURANCE COMPANY</SOLD_TO>
    <CONTRACT_ID>S620_N</CONTRACT_ID>
    <SALESREP_ID>2239</SALESREP_ID>
    <SALES_REP_NAME>Conley, Michael</SALES_REP_NAME>
    <ORDER_ACCEPTANCE>Skokie</ORDER_ACCEPTANCE>
    <BOOKED_COUNT>2</BOOKED_COUNT>
    <TERRITORY_NAME>Enterprise - Enterprise</TERRITORY_NAME>
    - <LIST_G_OPPCAT_BREAKDOWN>
    - <G_OPPCAT_BREAKDOWN>
    <QUOTE_NUMBER1>1428</QUOTE_NUMBER1> First Occurence of 1428
    <INT_ITM_TYPES>HARDWARE</INT_ITM_TYPES>
    <OPPORTUNITY_ID3>1000216</OPPORTUNITY_ID3>
    <INT_BILLING_CLASS>BILLABLE</INT_BILLING_CLASS>
    <SUM_ITM_COUNT>5</SUM_ITM_COUNT>
    <SUM_ITM_PRICE>151500.4</SUM_ITM_PRICE>
    <SUM_ITM_COST>1688</SUM_ITM_COST>
    <SUM_ITM_GPM>149812.4</SUM_ITM_GPM>
    <SUM_ITM_MARKUP>88.7514218009478672985781990521327014218</SUM_ITM_MARKUP>
    </G_OPPCAT_BREAKDOWN>
    - <G_OPPCAT_BREAKDOWN>
    <QUOTE_NUMBER1>1428</QUOTE_NUMBER1> Second Occurence of 1428
    <INT_ITM_TYPES>INVOICE_ADJUSTMENT</INT_ITM_TYPES>
    <OPPORTUNITY_ID3>1000216</OPPORTUNITY_ID3>
    <INT_BILLING_CLASS>BILLABLE</INT_BILLING_CLASS>
    <SUM_ITM_COUNT>4</SUM_ITM_COUNT>
    <SUM_ITM_PRICE>29.72</SUM_ITM_PRICE>
    <SUM_ITM_COST>0</SUM_ITM_COST>
    <SUM_ITM_GPM>29.72</SUM_ITM_GPM>
    <SUM_ITM_MARKUP />
    </G_OPPCAT_BREAKDOWN>
    - <G_OPPCAT_BREAKDOWN>
    <QUOTE_NUMBER1>1443</QUOTE_NUMBER1>
    <INT_ITM_TYPES>HARDWARE</INT_ITM_TYPES>
    <OPPORTUNITY_ID3>1000216</OPPORTUNITY_ID3>
    <INT_BILLING_CLASS>BILLABLE</INT_BILLING_CLASS>
    <SUM_ITM_COUNT>5</SUM_ITM_COUNT>
    <SUM_ITM_PRICE>2084</SUM_ITM_PRICE>
    <SUM_ITM_COST>1748</SUM_ITM_COST>
    <SUM_ITM_GPM>336</SUM_ITM_GPM>
    <SUM_ITM_MARKUP>.192219679633867276887871853546910755149</SUM_ITM_MARKUP>
    </G_OPPCAT_BREAKDOWN>
    - <G_OPPCAT_BREAKDOWN>
    <QUOTE_NUMBER1>1444</QUOTE_NUMBER1>
    <INT_ITM_TYPES>HARDWARE</INT_ITM_TYPES>
    <OPPORTUNITY_ID3>1000216</OPPORTUNITY_ID3>
    <INT_BILLING_CLASS>BILLABLE</INT_BILLING_CLASS>
    <SUM_ITM_COUNT>4</SUM_ITM_COUNT>
    <SUM_ITM_PRICE>1500.4</SUM_ITM_PRICE>
    <SUM_ITM_COST>1364</SUM_ITM_COST>
    <SUM_ITM_GPM>136.4</SUM_ITM_GPM>
    <SUM_ITM_MARKUP>.1</SUM_ITM_MARKUP>
    </G_OPPCAT_BREAKDOWN>
    - <G_OPPCAT_BREAKDOWN>
    <QUOTE_NUMBER1>1444</QUOTE_NUMBER1>
    <INT_ITM_TYPES>INVOICE_ADJUSTMENT</INT_ITM_TYPES>
    <OPPORTUNITY_ID3>1000216</OPPORTUNITY_ID3>
    <INT_BILLING_CLASS>BILLABLE</INT_BILLING_CLASS>
    <SUM_ITM_COUNT>4</SUM_ITM_COUNT>
    <SUM_ITM_PRICE>66.28</SUM_ITM_PRICE>
    <SUM_ITM_COST>0</SUM_ITM_COST>
    <SUM_ITM_GPM>66.28</SUM_ITM_GPM>
    <SUM_ITM_MARKUP />
    </G_OPPCAT_BREAKDOWN>
    - <G_OPPCAT_BREAKDOWN>
    <QUOTE_NUMBER1>1428</QUOTE_NUMBER1>
    <INT_ITM_TYPES>EXPENSE_ADJUSTMENT</INT_ITM_TYPES>
    <OPPORTUNITY_ID3>1000216</OPPORTUNITY_ID3>
    <INT_BILLING_CLASS>INTERNAL</INT_BILLING_CLASS>
    <SUM_ITM_COUNT>1</SUM_ITM_COUNT>
    <SUM_ITM_PRICE>0</SUM_ITM_PRICE>
    <SUM_ITM_COST>22.98</SUM_ITM_COST>
    <SUM_ITM_GPM />
    <SUM_ITM_MARKUP />
    </G_OPPCAT_BREAKDOWN>
    - <G_OPPCAT_BREAKDOWN>
    <QUOTE_NUMBER1>1444</QUOTE_NUMBER1>
    <INT_ITM_TYPES>EXPENSE_ADJUSTMENT</INT_ITM_TYPES>
    <OPPORTUNITY_ID3>1000216</OPPORTUNITY_ID3>
    <INT_BILLING_CLASS>INTERNAL</INT_BILLING_CLASS>
    <SUM_ITM_COUNT>1</SUM_ITM_COUNT>
    <SUM_ITM_PRICE>0</SUM_ITM_PRICE>
    <SUM_ITM_COST>22.98</SUM_ITM_COST>
    <SUM_ITM_GPM />
    <SUM_ITM_MARKUP />
    </G_OPPCAT_BREAKDOWN>
    - <G_OPPCAT_BREAKDOWN>
    <QUOTE_NUMBER1>1428</QUOTE_NUMBER1>
    <INT_ITM_TYPES>REVENUE_ADJUSTMENT</INT_ITM_TYPES>
    <OPPORTUNITY_ID3>1000216</OPPORTUNITY_ID3>
    <INT_BILLING_CLASS>INTERNAL</INT_BILLING_CLASS>
    <SUM_ITM_COUNT>1</SUM_ITM_COUNT>
    <SUM_ITM_PRICE>20</SUM_ITM_PRICE>
    <SUM_ITM_COST>101</SUM_ITM_COST>
    <SUM_ITM_GPM />
    <SUM_ITM_MARKUP />
    </G_OPPCAT_BREAKDOWN>
    </LIST_G_OPPCAT_BREAKDOWN>
    - <LIST_G_FORX_OPS_QTE_ORDER_LINES>
    - <G_FORX_OPS_QTE_ORDER_LINES>
    <ORDER_ACCEPTANCE1>SKOKIE</ORDER_ACCEPTANCE1>
    <COMMITMENT />
    <COMMITMENT_APPLIED_AMOUNT />
    <PARTIAL_COMMENTS />
    <COMMENT_FOR_INVOICE />
    <QUOTE_DATE>07/13/2009 02:00:10PM</QUOTE_DATE>
    <LINE_NUMBER>1</LINE_NUMBER>
    <EXTD_SELLING_PRICE>880</EXTD_SELLING_PRICE>
    <ORDER_PAY_TERM>Automated Term Due in 44 Days</ORDER_PAY_TERM>
    <QUOTE_PAY_TERM />
    <ITEM_CATEGORIES>HARDWARE.MACHINE.SERVER.</ITEM_CATEGORIES>
    <QUOTE_STATUS>Order Submitted</QUOTE_STATUS>
    <QUOTE_USER>Tyner, Chris</QUOTE_USER>
    <OPPORTUNITY_ID1>1000216</OPPORTUNITY_ID1>
    <DATASOURCE>1</DATASOURCE>
    <HEADER_ID>398631</HEADER_ID>
    <LINE_ID>900897</LINE_ID>
    <LINE_TYPE_ID>1181</LINE_TYPE_ID>
    <ORDER_NUMBER>159038</ORDER_NUMBER>
    <ORDER_VERSION>10</ORDER_VERSION>
    <TEAM>IBM</TEAM>
    <OPPORTUNITY_NAME1 />
    <QUOTE_NAME>1000216:IBM:UAT DEMO</QUOTE_NAME>
    <QUOTE_NUMBER>1428</QUOTE_NUMBER>
    <QUOTE_VERSION>2</QUOTE_VERSION>
    <NEW_PARTIAL>0</NEW_PARTIAL>
    <COMMIT_DEL_DATE>13-JUL-09</COMMIT_DEL_DATE>
    <ORDERED_QUANTITY>1</ORDERED_QUANTITY>
    <PO_NUMBER>098534089</PO_NUMBER>
    <GROUP_NUM>1</GROUP_NUM>
    <INVENTORY_ITEM_ID>845256</INVENTORY_ITEM_ID>
    <ORDERED_ITEM>7978BDU</ORDERED_ITEM>
    <PRODUCT>7978BDU</PRODUCT>
    <ITEM_DESCRIPTION>X3550, XEON QUAD CORE E5430 80W 2.66GHZ/1333MHZ/12MB L2, 2X1GB CHK, O/BAY 2.5IN HS SAS, SR 8K-I, PCI-E RISER CARD, ULTRABAY ENHANCED DVD-ROM/CD-RW COMBO DRIVE, 670W P/S, RACK</ITEM_DESCRIPTION>
    <MANUFACTURER_DESCRIPTION>IBM</MANUFACTURER_DESCRIPTION>
    <TYPE />
    <EQUIPMENT_CODE>B</EQUIPMENT_CODE>
    <TAX_CLASS_CODE>HW</TAX_CLASS_CODE>
    <CLS />
    <SUBINVENTORY />
    <UNIT_LIST_PRICE>0</UNIT_LIST_PRICE>
    <ITEM_UNIT_COST>800</ITEM_UNIT_COST>
    <VENDOR_INVENTORY_RETURN />
    <SHIPPING_TYPE />
    <SHIPPING_ORG>DSP</SHIPPING_ORG>
    <SOLD_TO1>ALLSTATE INSURANCE COMPANY</SOLD_TO1>
    <SOLD_TO_ACCOUNT_NUMBER>103736</SOLD_TO_ACCOUNT_NUMBER>
    <INVOICE_TO_LOCATION>10110384</INVOICE_TO_LOCATION>
    <INVOICE_TO>ALLSTATE INSURANCE COMPANY</INVOICE_TO>
    <INVOICE_TO_ACCOUNT_NUMBER>103736</INVOICE_TO_ACCOUNT_NUMBER>
    <INVOICE_TO_ADDRESS1>2775 SANDERS RD</INVOICE_TO_ADDRESS1>
    <INVOICE_TO_ADDRESS2 />
    <INVOICE_TO_ADDRESS3 />
    <INVOICE_TO_ADDRESS4 />
    <INVOICE_TO_EMAIL />
    <INVOICE_TO_PHONE_NUMBER>847-402-0223</INVOICE_TO_PHONE_NUMBER>
    <INVOICE_TO_ADDRESS5>NORTHBROOK, IL, 60062-6110, US</INVOICE_TO_ADDRESS5>
    <INVOICE_TO_CONTACT>CRAIG SOCKEL</INVOICE_TO_CONTACT>
    <L_INVOICE_TO_LOCATION>10110384</L_INVOICE_TO_LOCATION>
    <L_INVOICE_TO_ACCOUNT_NUMBER>103736</L_INVOICE_TO_ACCOUNT_NUMBER>
    <L_INVOICE_TO>ALLSTATE INSURANCE COMPANY</L_INVOICE_TO>
    <L_INVOICE_TO_ADDRESS1>2775 SANDERS RD</L_INVOICE_TO_ADDRESS1>
    <L_INVOICE_TO_ADDRESS2 />
    <L_INVOICE_TO_ADDRESS3 />
    <L_INVOICE_TO_ADDRESS4 />
    <L_INVOICE_TO_EMAIL />
    <L_INVOICE_TO_PHONE_NUMBER>847-402-0223</L_INVOICE_TO_PHONE_NUMBER>
    <L_INVOICE_TO_ADDRESS5>NORTHBROOK, IL, 60062-6110, US</L_INVOICE_TO_ADDRESS5>
    <L_INVOICE_TO_CONTACT>CRAIG SOCKEL</L_INVOICE_TO_CONTACT>
    <SHIP_TO_ACCOUNT_NUMBER>103736</SHIP_TO_ACCOUNT_NUMBER>
    <SHIP_TO>ALLSTATE INSURANCE COMPANY</SHIP_TO>
    <SHIP_TO_LOCATION>10271260</SHIP_TO_LOCATION>
    <SHIP_TO_ADDRESS1>3075 SANDERS RD STE 12C</SHIP_TO_ADDRESS1>
    <SHIP_TO_ADDRESS2 />
    <SHIP_TO_ADDRESS3 />
    <SHIP_TO_ADDRESS4 />
    <SHIP_TO_ADDRESS>NORTHBROOK, IL, 60062-7119, US</SHIP_TO_ADDRESS>
    <SHIP_EMAIL>[email protected]</SHIP_EMAIL>
    <SHIP_TO_PHONE_NUMBER>847-402-0223</SHIP_TO_PHONE_NUMBER>
    <SHIP_TO_CONTACT>ORLANDO LOPEZ</SHIP_TO_CONTACT>
    <L_SHIP_TO_ACCOUNT_NUMBER>103736</L_SHIP_TO_ACCOUNT_NUMBER>
    <L_SHIP_TO>ALLSTATE INSURANCE COMPANY</L_SHIP_TO>
    <L_SHIP_TO_LOCATION>10271260</L_SHIP_TO_LOCATION>
    <L_SHIP_TO_ADDRESS1>3075 SANDERS RD STE 12C</L_SHIP_TO_ADDRESS1>
    <L_SHIP_TO_ADDRESS2 />
    <L_SHIP_TO_ADDRESS3 />
    <L_SHIP_TO_ADDRESS4 />
    <L_SHIP_TO_ADDRESS>NORTHBROOK, IL, 60062-7119, US</L_SHIP_TO_ADDRESS>
    <L_SHIP_EMAIL>[email protected]</L_SHIP_EMAIL>
    <L_SHIP_TO_PHONE_NUMBER>847-402-0223</L_SHIP_TO_PHONE_NUMBER>
    <L_SHIP_TO_CONTACT>ORLANDO LOPEZ</L_SHIP_TO_CONTACT>
    <DEL_TO_ACCOUNT_NUMBER>103736</DEL_TO_ACCOUNT_NUMBER>
    <DEL_TO>ALLSTATE INSURANCE COMPANY</DEL_TO>
    <DEL_TO_LOCATION>10110327</DEL_TO_LOCATION>
    <DEL_TO_ADDRESS1>3075 SANDERS RD</DEL_TO_ADDRESS1>
    <DEL_TO_ADDRESS2 />
    <DEL_TO_ADDRESS3 />
    <DEL_TO_ADDRESS4 />
    <DEL_TO_ADDRESS>NORTHBROOK, IL, 60062-7119, US</DEL_TO_ADDRESS>
    <DEL_TO_EMAIL />
    <DEL_TO_PHONE_NUMBER>847-402-0223</DEL_TO_PHONE_NUMBER>
    <DEL_TO_CONTACT />
    <UNIT_SELLING_PRICE>880</UNIT_SELLING_PRICE>
    <BILL_TO_LAST_UPDATE>21/04/2009 02:25:18PM</BILL_TO_LAST_UPDATE>
    <SHIP_TO_LAST_UPDATE>13/07/2009 01:31:45PM</SHIP_TO_LAST_UPDATE>
    <BILL_TO_UPDATED_BY>SLUMPP</BILL_TO_UPDATED_BY>
    <SHIP_TO_UPDATED_BY>CTYNER</SHIP_TO_UPDATED_BY>
    <ORDER_QUOTE_USER>CTYNER</ORDER_QUOTE_USER>
    <PARTICIPANTS>Conley, Michael Order:159044 100% and Conley, Michael Order:159038 100% and Conley, Michael Quote:1443 50% and Jones, Maureen Quote:1443 50%</PARTICIPANTS>
    <ORDERED_DATE>07/13/2009 02:23:23PM</ORDERED_DATE>
    <BOOKED_DATE>07/13/2009 02:31:15PM</BOOKED_DATE>
    <ORDER_QUOTE_STATUS>BOOKED</ORDER_QUOTE_STATUS>
    <ORDER_USER_STATUS>RE-BOOK REQD</ORDER_USER_STATUS>
    <BUYER>Tyner, Chris</BUYER>
    <SERIAL_NUM>45784687</SERIAL_NUM>
    <INVOICE_HANDLING_FORMAT_VALUE />
    <INVOICE_HANDLING_FORMAT />
    <PRINT_TRADE_NAME_VALUE>No</PRINT_TRADE_NAME_VALUE>
    <ITEM_EXTD_COST>800</ITEM_EXTD_COST>
    <QUOTE_APPROVERS>Tyner, Chris</QUOTE_APPROVERS>
    </G_FORX_OPS_QTE_ORDER_LINES>

Maybe you are looking for

  • Do I have to upgrade my software when updating from 10.3.9 to Tiger?

    I have pretty much the latest versions of all my software, as far as 10.3.9, anyhow. Mostly, I used Adobe and Macromedia programs, and I use Eudora (I have the latest one- 6.2 - I know they've stopped updating it.) Also, I still use my Classic enviro

  • Additional workflow Mailer setup on Purchase Order

    Dear All, We are running on R12 on 11.0.1.7 database. We have configured Workflow mailer notification and it seems to be running properly.. And the approver/approvee gets appropriate mails on appropriate time. But our management requires additional c

  • RoboHelp 6 crashes-Robo 5 project when using conditional build tags

    Hi there I had no build tags in my project, and it was an R5 project. I just upgrated to R6. I need to use the tags & when I put a build tag or two in the project on the topic level and compile it and it crashes. Based on a prior thread (related to m

  • How to combine two Info provider data matained at different line items?

    Hello Friends, I have a requirement in which they want to combine the invoice line item data with the GL line item data , in which both are maintained at different line items....... For e.g: DSo 1: Invoice no                Inv line item         Net

  • Disk I/O errors within every two weeks

    So here's my problem. We've got 2 servers. First one is the Open Directory Master, iCal and Wiki Server. The second one is the Replica of the first server. Also this is the server that has the homefolders. Every night i make a backup of the homefolde