Data Origin Types not filled in the tab "Control Data" of BP interface
Hello experts,
I have loaded the clients from ECC6.0 to CRM 4.0.
Before I have loaded the clients I have maintained the data origin type for the BP in spro -> cross application components -> SAP Business Partner -> Business partner -> Basic settings -> Data Origin -> Maintain Data Origin Type.
After I have done the load initial of clients, the field "Data Origin" is empty in the tab "Control Data" in BP interface. If I do F4 in the field appear the configuration that I did in spro appear.
For this field will appear filled I'll need to do more configurations in spro?
Best regards,
Mary
Hi Mary,
The middleware does not fill this field in BP master data. You can maintain data origin type in SPRO, however the mBdoc does not use this customizing in order to fill this field.
Please try to use the BADI CRM_DATAEXCHG_BADI in order to fill this field during master data download.
It hope it helps.
Regards,
Gabriel Santana
Similar Messages
-
Example: If I'm typing in www.mozilla.com, when I get to www.mo, it drops down a list of all the sites I've previously gone to that start with that.
Quote: ''I have my settings to not fill in the URL bar when I type''<br />
Do you have an extension to make that setting or did you change the pref [http://kb.mozillazine.org/browser.urlbar.maxRichResults browser.urlbar.maxRichResults] on the about:config page to 0 or -1?
In the Firefox 3.0.x versions you are limited about what to do with the location bar.
* Old Location Bar: https://addons.mozilla.org/firefox/addon/7637
If you update to Firefox 3.5.x or 3.6.x then you have more options for the location bar behavior.<br />
See [[Smart Location Bar]] -
The data target is not appeared in the Infopackage under datatagets tab.
Hi thanks for your response, i eloboreted my problem below pl see,
In the Info Cube structure i check the Trassactinal check box, In the Infopackage level under the data targets tab i selected the 'Select data targets' radio button icon but the data target is not appeared in the table.pl give me a suggetion in which location can i make a change.
Thanks & Regards
BhaskarThe same question in data source is not appeared in the Infopackage.
-
Add a new field in the Tab Addicional data en la ME22N
Hi,
Please, can anyone tell me how can we add a new field in the tab Addicional data en la ME21N? I have to use the MM06E005, but I don't know which screen exit should I use and also how to add this subcreen in the tab Addicional data.
Thanks in advance.
Saida.Hi,
using SE80 you can add your fields with subscreens
SAPLXM06 0101 for Headerfields
SAPLXM06 0111 for Items.
This will add a tab in ME2..N.
if you want your own Text on the tabstrip just edit the Textsymbols
101 and 111 from SAPLXM06.
At output you have to open a module asking the gl_aktyp to switch edit/display mode.
then you must code the Exits to import/export values
EXIT_SAPMM06E_006
store transaction type for later modification of screen attributes
gl_aktyp = i_trtyp.
gl_no_screen = i_no_screen.
store current state of customer data in ekko_ci (structure for screen)
ekko_ci = i_ci_ekko.
store reference document
if i_rekko-ebeln ne gl_rekko-ebeln and
not i_rekko-ebeln is initial and
gl_rekko-ebeln is initial.
ekko_ci-zzemail = i_rekko-zzemail.
gl_rekko = i_rekko.
endif.
EXIT_SAPMM06E_007
move-corresponding i_ekko to gl_ekko_ci.
EXIT_SAPMM06E_008
e_ci_ekko = gl_ekko_ci.
ekko_ci contains the actual values of the Dynpro fields
e_ci_update is only set if you really want the fields
on the Dynpro to be saved. You must set it then to 'X'
the field ekko_ci-zzflag will here only be saved if there
was a change and the transaction is not in display mode
if gl_ekko_ci-zzemail ne ekko_ci-zzemail.
e_ci_ekko-zzemail = ekko_ci-zzemail.
if gl_aktyp ne 'A'.
e_ci_update = 'X'.
endif.
endif.
Regards
Kiran Sure -
System error: Default TXJCD is not filled in the table T001
Hi friends,
Can anyone help me out in this scenario? We are facing a peculiar problem.
We are in a upgrade project from 4.5b to ECC 6.0.Client is not maintaining any tax codes i.e they are maintaining it outside SAP.The problem is when ever the billing document is released to accounting(VF02) in ECC 6.0 it is showing this error System error: Default TXJCD is not filled in the table T001.But this is working fine in 4.5b.
Are there any basic changes regarding TAX JURISDICTION CODE is concerned from upgrade. Please provide.
Thanks in advance,
YogaHi Yoga,
Probably, the program is showing error message FF799, please maintain transaction OBCL with a default tax jurisdiction code.
The tax jurisdiction code should be maintained at state level only and
corresponds to the tax jurisdiction code structure maintained in table
TTXD. For example, if your structure is 2-3-4-1. Then your default
code should be XX00000000. I suspect that the settings in transaction
OBCL are incorrect and hence the FF799 error, when shipping from a US
plant to a foreign ship-to customer (non-US).
Addional info concerning the Tax Interface for standard methods for
US taxes you can find at - http://www.saplabs.com/projects/tax/
Documentation: Tax Interface Configuration Guide for release 4.6x
Please have a look at attached notes 112609 and 385127.
Here is the explaination that the process for tax-exempt transactions
has been changed.
Other notes you may need for OBCL :
-> 0627091 Message FF749 with billing data transfer
-> 0608159 Error FS791 during billing data transfer
-> 0380158 Jurisdiction code for export business transaction
-> 0419124 Export billing document with tax jurisdictions
I hope this information helps you,.
Regards,
Paulo -
Clean-up all data that did not match with the selection.
Hi Everyone,
In my requirement I need to Clean-up all data that did not match with the selection from my internal table lt_cdpos.....in this case wat can i use like.'Refresh' or ' Clear' or 'DELETE ADJACENT DUPLICATES FROM lt_cdpos'.
Pls suggest me...Hi Meenakshi
Try delete lt_cdpos where kunnr NE KUNNR (from selection screen) .
Before Checking <condition> make sure both comparing field type match with each other.
You can use FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' for append leading zeros in compare condition before comparing kunnr from selection screen
Regards
Parveen -
Firefox does not open all the tabs kirloskar brothers limited portal
firefox does not open all the tabs kirloskar brothers limited portal
Hello,
To find the correct solution to your problem, we need some more non-personal information from you. Please do the following:
# Use ONE of these methods to open the Firefox Troubleshooting Information page:
#* Click the menu button [[Image:New Fx Menu]], click on help [[Image:Help-29]] and select ''Troubleshooting Information''.
#* Type '''about:support''' into the Firefox address bar and press the enter key.
# At the top of the Troubleshooting Information page that comes up, you should see a button that says "Copy text to clipboard". Click it.
#Now, go back to your forum post, right-click in the reply box and select '''Paste''' from the context menu (or else click inside the reply box and press the Ctrl+V keys) to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help! -
My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new one?
http://swcdn.apple.com/content/downloads/37/23/041-5058/lr5tynbldi18zcrqo8a8uq88 rnjushqliu/Safari6Lion.pkg
Here you go..... -
The word "ORIGINAL" is not appearing in the print out of documents
Hi,
For some reason the word "ORIGINAL" does not appear in the print outs (A/R Invoice, etc) anymore. But the word "COPY" appears when we reprint the documents. We could not see any setting in SAP that relates to this, and no changes in the PLD has been made prior to this issue. What could we be missing?
Thank you,
ericHi Eric,
The "Copy" remarks will be printed if you print a printed documents. Sometimes documents automatically change into "Open-Printed" event if we not actually print it.
The solution is to chnge that remarks in the PLD to text "Original".
Cheers -
Created new data source, does not appear in the list
Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
thanks
SrinivasHi
I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
- If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
- It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
- Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
thanks
Srinivas -
How can I get iCal not to show the same birthday dates from my iCloud
How can I get iCal not to show the same birthday dates from my iCloud?
You don't need them stored locally for a backup. You can manually export your contacts as archive for backup. Also, if you are backing up with Time Machine, you already have a backup. If your hard drive crashed, you would have to rely on your backup or iCloud anyway.
So, if you're comfortable with that, sign out of iCloud. Choose to delete contacts from the computer. When you sign back into iCloud, you should only have iCloud contacts listed in AB. When you open iCal, you should only have one listing for birthdays.
The other alternative is to disable the Birthday c.alendar and create one manually. -
'Order type not defined in the sales area'.
Hi,
I am creating a sales order, in order type I am taking standard order 'OR' but it is giving error message -'Order type not defined in the sales area'.
Pls where to tweak..
regards,Hi,
In the transaction code OVAZ you can assign the SALES ORDER type to your SALES AREA
and also check the below transaction code
OVAM--- Reference distribution channel
OVAN---- Reference Division
OVAO ---Reference sales organisation
revert back if you need any more
thanks
santosh -
I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures and that I need to in order to purchase it, even though I did and have checked multiple times. Please help, it's for Mother's Day.
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN -
Default TXJCD is not filled in the table T001
Hi gurus,
I get the error mesage "Default TXJCD is not filled in the table T001" in trcode VF01.
How can I correct the error?
Thanks&RegardsAssign a tax juristiction to your Company Code.
-
Maintenance Order TECO date must not be befor the Permit Issue Date
Hi Friends,
I have a genuine requirement like " Maintenance Order TECO date must not be befor the Permit Issue Date ".
The requirement is System shall issue a message if TECO date is before the Permit issue date.
Guys pls help me onthis.
Thanks & Regards,
krishnaKrishna,
What you can do is use a User Exit: IWO10004 Maintenance order: Customer check for order completionand check that the reference date of completion, also you would need the approval date for the assigned permits in Order by using the table "IHSG" or a relevant function module to get the details of the Permit approval date. After you have the permit approval date, you can compare it with the reference date of completion and if mismatched then generate the relevant error message.
regards,
Muhammad Usman Kahoot
Maybe you are looking for
-
Sychronisation of DAQ on multiple cards
I am operating with Labview 5.1.1 and Flexmotion on Windows 98 and I am an intermediate user. Using PCI-6023E and PCI-7344 motion controller card, connected by an RTSI cable. Want a process whereby after running a subvi, DAQ begins at the same time o
-
oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8 Cause: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8 I am getting the above error message when i tes
-
Primavera P6 Analytics R3.3
Hello Friends, I am installing analytics 3.3 and facing error in the last step. Please let me know if anyone has faced any issue with the installation. The below error comes when I try to run reporting db diagnostic utilityin the last step. Details B
-
Hi All We have got a requirement where we have been given tax_rate_code now based on this tax_rate code we need to find the tax account ie ccid of the tax can anybody tell me the what are the two tables envolved Note we are on R12 1.1
-
Pb entre Photoshop CS3 et l'imprimante Sony UP CR 20L
Bonjour, Je suis photographe et comme le dit le titre, j'ai un soucis de compatibilité entre Photoshop CS3 et l'imprimante à sublimation thermique SONY UP-CR 20L. je m'explique : J'ouvre une image (JPG sortit de mon D3) sur photoshop, je fais quelque