Data overwriting n not getting displayed in seperate ro
Hi Experts,
I have a very simple doubt here.
I have two popups with me. Say popup1 and popup2. Both are tables.
popup2 opens through popup1. I have some data in popup2 which i have to pass to popup1. I select one row in popup2 and pass the same to popup1 on the click of button "ok". Now if I again select another row from popup2 and press the button "ok". the new value overwrites the old value in pupup1.
I need the new value from popup2 to be displayed in a new row in popup1 n no overwriting should happen.
In short, the data in popup1 coming from popup2 is not getting poplutaed in seperate rows, instead it is overwriting the previous entry.
Please suggest me complete code to iterate the data in different rows or else letme know if i have to make changes in some property of my tables in popup.
Best Regards,
Kaustubh
Hi Kausthab,
you want to get the details or rows selected in the popup2 to popup1 right?
Get the current row from the popup2 and store it in another(say Node1) node while clicking ok.
write another piece of code to get the size of the Node1. Once you got the size then loop that and create element for the popup1 table node.
Simple.
I think this is your problem
Regards
SM Nizamudeen
Similar Messages
-
The values for list items of other data blocks are not getting displayed when executed.
Hi,
I have a new problem again.
I am doing a new form in which there are around 8 blocks. All the blocks have their tables in the oracle database.
Each block has 18 columns with the same column & column names. But the values in those columns are different & the values do not match.
The problem lies while i execute the form, it populates only the first block data. Other blocks do not display or populate the values.
I cannot create a master relationship because all the column values are different.
How do i display or populate the values of all the tables?
Please help me. Thank You.hi
if your form has truly disassociated tables, then you could simply use a key-exeqry trigger at forms level to travel to each block in turn and perform an execute-query built-in, eventually returning to the starting block.
ie
go_block('..');
execute_query;
go_block('..');
execute_query;
etc
go_item(......);
In this case you would use the block where clause to constrain each table to the appropriate set.
If however, the database has no relationships between the tables but the data content has some corelation, then you could craft a forms relation manually.
cheers
Rod -
Master data: Text is not getting displayed
Hi Experts,
There is one Infoobject 0EMPLOYEE..It is the master data.I am loading the attributes and texts for the same..I am loading this object thru Direct Update.When I go in the Maintain Masterdata...there I am not able to see the text..I have selected Medium Description..But text is there in the T table..
Please help me out as what can be the problem..
Thanks,
Shalaka.Hi Shalaka,
You need to activate that particular master firstly, inorder to make the changes reflect in the maintain master data.
and as you are saying the text text is visible in Report,so it might
be a problem of refreshing as well.
Regards,
Umesh. -
Data is not getting displayed in the report from an Infoset.
Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.RaoHi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
Master data is not getting displayed in the Query Designer
Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
ThanksHi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks -
Table PA0045 is getting updated but data is not getting displayed in Infty
Hi,
When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
Regards,
JyotiCheck if there is proper data to be shown in the tabstrip.
EX.. Loan Amount Granted in the Tabstrip Basicdata ... -
Data not getting displayed in query
Hi
I have master infoobject with keyfigure units as percentage, and data is loaded and working fine.
data is not getting displayed in query, i am getting the error message, that exception aggregation has to be maintained for 0calday.
how do i resolve the issue
Regardssolved
-
Data of one group not getting displayed (in rtf template)
Hi
We have build one rtf template it has 2 sectrions one is main section where data is being displayed with out any issues.
where as for Sub section data is not getting displayed though there is data in xml file
1) Main section
<?for-each@section:G_ORDER?>
<?for-each:G_PART_NUM?>
data in this porting is getting displayed
<?end for-each?>
<?end for-each?>
2) Sub section at the end of page
<?for-each:G_SCH_SCH_B?>
data in this portion is not getting displayed
<?end for-each?>
Regards
Kamalakar.G
Edited by: kamalakarg on Jul 13, 2012 8:47 PMPlease, post sample XML and desired output.
-
Data carrier & application field are not getting displayed in CV04N
Hi Guru's
In TCode : CV04N, data carrier & application field are not getting displayed.
While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
Let me know is there any configuration that has been missed out.
Regards
BhanuHi Bhanu,
Please note that the fields 'Data carrier' & 'Application field' are visible only if no document type is entered.
Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
Regards,
Pradeepkumar Haragoldavar -
Adhoc Query data not getting displayed on Portal
Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GTHi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal -
Data is not getting displayed in my form
hi,
i have declared variable to hold amount in that as v_amt type konv-kwert in my program and in form interface in import parameters i gave it the same as v_amt type konv-kwert..............and in text i gave the variable v_amt.............
but it is not getting displayed................Hi!
on the application toolbar on the top a icon is there for Field list on/off.
click on it.
below left hand side field names will be displayed.
now from the import parameter drag that parameter and drop it in the text boc where you are to display it.
try this way.....it can work.....sometimes there is problem when u don't drag and drop the fields from the list box in the text nodes.
Regards. -
Total is not getting displayed in the ALV output.
Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
IT_eventS TYPE slis_t_event,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
belnr TYPE dberchz-belnr,
belzart TYPE dberchz-belzart,
net TYPE dberchz-nettobtr,
END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'YZ_PLR'
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* IT_EXCLUDING =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = layout
it_fieldcat = fcat[]
i_tabname = 'LT_TAB'
it_events = IT_EVENTS[]
* IT_SORT =
* I_TEXT = ' '
tables
t_outtab = lt_tab[]
* EXCEPTIONS
* PROGRAM_ERROR = 1
* MAXIMUM_OF_APPENDS_REACHED = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
GauravHi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
WRBTR LIKE BSEG-WRBTR,
WAERS LIKE BKPF-WAERS,
END OF LT_TAB.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS TYPE SLIS_T_EVENT,
FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
REC_FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS = 1.
FCAT-FIELDNAME = 'BELNR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 2.
FCAT-FIELDNAME = 'GJAHR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 3.
FCAT-FIELDNAME = 'WRBTR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-CFIELDNAME = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME = 'BSEG'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
FCAT-COL_POS = 4.
FCAT-FIELDNAME = 'WAERS'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME = 'BKPF'.
FCAT-DO_SUM = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
WHERE BUKRS = 'MAAB'
AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT[]
I_TABNAME = 'LT_TAB'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max -
Default Value is not getting displayed in SUN ONE Ldap
Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil KumarHi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi -
Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
JeetuHi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier. -
Links not getting displayed in the contextual panel
Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
AshutoshHi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh
Maybe you are looking for
-
I received an email stating that I had downloaded something from iTunes that I didn't download. I went in to reset the password on that account, but now I'm unable to; the emals aren't sending to my email account nor is my birthdate correct anymore.
-
Can an error in battery cause a slow CPUS and the fan to run non-stop?
tthe battery need serviced but my computer runs slow and the fan is running non-stop. MacBook Pro 13" purchased around 2011.
-
Will the battery protect the MBA in the event of a power issue? Will the MBA interface with a UPS with a USB connection? Will this allow auto shut-off if the MBA is asleep? Any help would be greatly appreciated!
-
Trigger a WD Application on click of a button
Hi, Could anyone please tell me the steps involved in triggering a webdynpro application on click of a button ? I have created the webdynpro application. The button is "Create Follow-on RFx" which is associated with event "FOLLOWON_RFQ" Thank you, Pa
-
I have acrobat 5.0 loaded along with Acrobat reader 9.0. However whenever I am in any web browser, IE or Firefox, whenever I try to open a PDF on a web site, it begins to open 5.0 and states" The Adobe Acrobat/Reader that is running cannot be uset ot