Data Servers Enabled Servers not visible

Hi,
We seem to be having a problem with xMII at the moment. Enabled servers within Data Servers are not visible. The windows is completely blank. After unchecking Show Only Enabled Server we get the following error as below and no connectors are visible. The version of xMII being used is 11.5. Any pointers on how to solve this.
Thanks,
Vanshi
Error. The server encountered an unexpected condition which prevented it from fulfilling the request.
java.lang.NullPointerException
at pagecompile._Admin._Server_xjsp._jspService(_Server_xjsp.java:138)
at com.newatlanta.servletexec.JspHttpJspPage.service(JspHttpJspPage.java:41)
at com.newatlanta.servletexec.JspServlet.service(JspServlet.java:1036)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.newatlanta.servletexec.SERequestDispatcher.forwardServlet(SERequestDispatcher.java:638)
at com.newatlanta.servletexec.SERequestDispatcher.forward(SERequestDispatcher.java:236)
at com.newatlanta.servletexec.SERequestDispatcher.internalForward(SERequestDispatcher.java:283)
at com.newatlanta.servletexec.SEFilterChain.doFilter(SEFilterChain.java:96)
at com.lighthammer.cms.system.CMSFilter.doFilter(Unknown Source)
at com.newatlanta.servletexec.SEFilterChain.doFilter(SEFilterChain.java:60)
at com.newatlanta.servletexec.ApplicationInfo.filterApplRequest(ApplicationInfo.java:2159)
at com.newatlanta.servletexec.ApplicationInfo.processApplRequest(ApplicationInfo.java:1823)
at com.newatlanta.servletexec.ServerHostInfo.processApplRequest(ServerHostInfo.java:937)
at com.newatlanta.servletexec.ServletExec.ProcessRequest(ServletExec.java:1091)
at com.newatlanta.servletexec.ServletExec.ProcessRequest(ServletExec.java:973)
at com.newatlanta.servletexec.ServletExecService.processServletRequest(ServletExecService.java:167)
at com.newatlanta.servletexec.ServletExecService.Run(ServletExecService.java:204)
at com.newatlanta.servletexec.HttpServerRequest.run(HttpServerRequest.java:487)

Give these URL's a try:
/Lighthammer/Illuminator?Service=SystemInfo&Mode=ServerList
/Lighthammer/Illuminator?Service=SystemInfo&Mode=ServerList&Mask=Disabled
They should essentially give you the list of active and disabled data servers (much like the jsp page is trying to do)
It is possible you managed to get an invalid name in the system and that's causing the error.
You could also look carefully into the Server.xml file in the Conf directory.
A ServletExec restart will also cause the system to re-read the file and log out trace information about the data server in the cms.log file (you'll see Loading Servers... and then you should see them one at a time).

Similar Messages

Account Assignment data in Shopping Cart not visible after upgrade of R/3

Hello,
We are currently working with SRM 5.0 and R/3 4.6 Backend system.
We are now upgrading our R/3 system from version 4.6C to ECC 6.0.
When we try to create a shopping cart, the account assignment Tab is not visible.
We checked the RFC (SRM-R/3 and R/3-SRM) and they our working fine.
Now we think the problem is caused by a configuration setting in which one defines the Backend System. In this configuration, the system category is still set to 4.6C (for the logical System of the Backend System)
We want to change this but in our list of system categories, the ECC 6.0 option is not present!
Questions:
1. Is this configuration setting the cause for our account assignment tab problem?
2. How can one add the System Category ECC 6.0 so it will appear in the configuration setting "Specify Backend System" ?
Anyone had experience with this? Please give us a clue.
Thanks in advance.
Aart

Hello Aart,
You can choose the ERP_2.0 option. It contains the correct structures for the new ECC 6.0 system.
You can change it and retest.
Kind regards,
Ricardo

'Secondary Logon' service for Windows servers - enable or not?

Hi,
Since have only one windows server working as 'TS server' to remote employes on our network and another 04 (one for SQL, another for Exchange, another for File and another for DHCP/DNS), can we disable that service on all servers except TS server or we can
disable it on all??
>>> There is some services that depends on it?
interesting article:
http://tech-wonders.blogspot.com.br/2009/08/disable-secondary-logon-service-to.html
useful links:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sys_srv_secondary_logon.mspx?mfr=true
http://www.blackviper.com/windows-services/secondary-logon/

Windows Secondary Logon allows administrators to log on with a non-administrator account to perform administrative tasks without logging off by using Run as option.
Enabling/Disabling depends from one organization to another.
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

CCMS alert monitoring data for ORACLE is not visible in Central system

Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod Meno

Bhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon

SAP GUI issues - VA41 - additonal data B screen is not visible completly

Hello everyone,
Tthere was a problem reported by one of our sales users that in VA41/VA42 screen, there are different tables available, there is a tab "Additional data B" for one user only half of the tab is visible in the presentation server. The user is not able to scroll right/left and couldn't do any data entry on that screen.
Any one has any clue why this issue is only for this user.
The GUI version and patch : 7.10 with Patch level 3 ( File version : 7100.1.3.1029)
When we ask the user to try logging with his id in another PC, the table is visible completely. Both the desktop' GUI version is all the same. No other user is having this issue except one user. Hence I think it is related to GUI issue.
If anyone faced this issue before, please suggest a resolution/workaround
Please don't suggest for higher level patch, other PC's with the same level patch is working fine.
Rajan

We had a similar issue with a different t-code. The user also had a problem with Outlook and the CRM system we use. We eventually decided thet athe user's profile information was corrupted.
We deleted the user's windows profile on the particular PC and then created it again. This fixed the problem - probably not the best answer, but it worked.

OEM - Data Guard Menu is not visible

Hello guys,
at the moment i am trying to install and configure Oracle Dataguard in our test environment.
Because of some easy managing of Data Guard i want to use the OEM Data Guard interface in the OEM. So i configured my local OEM on my test database and started it.
I login with SYSDBA privileges to the local OEM on my test server, but i don't see any Data Guard menu.
I go to Maintenance -> High Availability and the last point that i can see is "File System Backup and Restore" .. but the help of the OEM says:
File System Backup and Restore -- Backup or restore the database file system.
Data Guard -- Use Data Guard to protect critical data by automating the creation, management, and monitoring aspects of standby database environments. I don't see any Data Guard menu point in my OEM.
The documentation of the Data Guard .. says the same:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14230/install.htm#BABFHFEI
To use DGMGRL, the best practice is to install the Oracle Enterprise Edition or Personal Edition database software on each location you expect to include in broker configurations. You must install Oracle Enterprise Manager 10g Grid Control to use the Enterprise Manager Web-based user interface for Data Guard.
The DGMGRL is available. Am i doing something wrong?
UPDATE!!: The problem is solved.. i justed mixed up the ports between database and grid control :-\ .. it is working now
Regards
Stefan

Hi Joshi,
Check ur detailed navigation is open or closed
goto cont adminportal content-- go to ur default frame work page-- desktop innerpage-- open --- see detailed navigation iview is checked for visible or not
hope this helps u
Regards
Krishna.

Data in ZIC_C03 cube not visible

I have loaded the data into the cube using 2LIS_03_BF infosource.
The data is loaded into the cube and it is showing as reportable when I go to the Manage Requests tab. However when I try to look into the cube contents, nothing comes up. Also when I try to run a BEX query nothing shows up.
Any idea why??
Thanks

In Listcube, choose your record type. 0 should give you the BF records and 1 will give you the BX records.
If you choose 0 to 1 you will get both.
You still won't be able to see your non-cumulative kyfs because those are only available through your query. To calculate them, you need to subtract your outflow kyf from your inflow kyf in listcube.
Also, when loading the BX and BF extractors, it is important to follow the steps outlined in the white paper titled, "How to Handle Inventory Management Scenarios in BW".
You could also create a custom ODS and load it in parallel with your cube. This way you can see what records are coming across. It's a little easier than fooling around with the PSA.
Two last things to check.... If you have update rules on characteristics, make none of them have a returncode 0, it kicks out the entire record which is different than a key figure -and- if you have a start routine, make sure you are not deleting your entire data_package.
Brian
Edited by: Brian Anthony on Jan 3, 2008 11:51 AM

Add-ons which are installed and enabled are not visible - no Firebug icon, no Web Developer toolbar.

I was busy working with Firebug last night. This morning the icon wasn't present and I couldn't find it anywhere. In Add-on manager I disabled/reloaded then enabled/reloaded, but still nothing. Web developer toolbar was also missing and not in the toolbar menu. Checking versions, I saw I had Firebug 1.8.1, and one of the compatibility lists suggested that went with Firefox 6 (I was on 5.0.1).
I installed Firefox 6 beta, reinstalled Firebug 1.8.1, but no change. I uninstalled, reinstalled 5.0.1 and this time Firebug 1.8.0, and again nothing.
I must be missing something, but my poductivity has suffered so much that I'd be happy to discover exactly what sort of idiot I am.

I know where to find it. It was the absence of that icon I was complaining about. After a day and a half of doing very little, I suddenly saw that the Web Developer toolbar had reappeared (for no apparent reason). That gave me access to options which had previously been invisible, and I have succeeded in switching Firebug on again. I only wish I could tell all the other people suffering from this problem how to solve it, but the solution was quite spontaneous.

Employees data uploaded thru lsmw not visible in ppome

hi experts,
i have uploaded some HR master data thru lsmw using tcode pa40.
i am getting all the data in master tables pa0000,pa0001,pa0002.
for example
100 is a person with position manager(e.g. 5000234).
i am getting his details in all the tables .and in pa 30 also when i type pernr i am getting all the informations.
buit when in go in ppome to see the details of position organisational structure .
under manager and that position no his name is not assigned .
what may be the problem ????
it's very urgent .... i am in production stage. pl. hep immediately
regards,
mani

Hi Mani,
Sorry yaar i dont have enough knowledge to discuss/tell abt spro, anyway go through this hope u can .
More or less, the SPRO transaction is just a collection of table maintenance programs. So in order to see the changes to the tables, the tables must have the "log changes" checkbox assigned to the table itself. Some programs in spro may provide there own "changes" functionality.
Here is the help on "Log Data Changes".
Log data changes
The logging flag defines whether changes to the data records of a table should be logged. If logging is activated, every change (with UPDATE, DELETE) to an existing data record by a user or an application program is recorded in a log table in the database.
Note: Activating logging slows down accesses that change the table. First of all, a record must be written in the log table for each change. Secondly, many users access this log table in parallel. This could cause lock situations even though the users are working with different application tables.
Dependencies
Logging only takes place if parameter rec/client in the system profile is set correctly. Setting the flag on its own does not cause the table changes to be logged.
The existing logs can be displayed with Transaction Table history (SCU3).
As the help has described, use transaction SCU3 to view the change logs regarding customizing tables.
Thanks
NAveen khan

Employee data uploaded thru lsmw not visible in ppome

hi experts,
i have uploaded some HR master data thru lsmw using tcode pa40.
i am getting all the data in master tables pa0000,pa0001,pa0002.
for example
100 is a person with position manager(e.g. 5000234).
i am getting his details in all the tables .and in pa 30 also when i type pernr i am getting all the informations.
buit when in go in ppome to see the details of position organisational structure .
under manager and that position no his name is not assigned .
what may be the problem ????
it's very urgent .... i am in production stage. pl. hep immediately
regards,
mani

hello is there anyone to help me

Data Type Enhancement not visible in SPROXY

Hi All,
We are implementing SRM 7.0 with PI 7.1.
We have a reuiquirement of adding custom fields in the standard message DespatchedDeliveryNotification_Out which is sent from SRM SUS. I have created the data type enhancement in the ESR in the namespace http://sap.com/xi/SRM/SupplierEnablement/Global
for the data type DespatchedDeliveryNotification. But the Data Type Enhancement is not visible in transaction SPROXY in the SRM server.
Is this the way to do it? Or there is some different method to be followed?
Please advise.
Regards,
Karen Pereira

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

Some of the Master Data Attributes DataSources not visible in RSA5

Hi Experts,
After installation of R/3 ECC 5, some of the master data attributes datasources are not visible in RSA5.
Do i need to do any other settings to get them.
Awaiting response....
Thanks in advance.....
Rafi

Hi Prakash,
Thanks for quick response. I have checked those tables. i found that i have same datasources as it is in RSA5.
For example: i have 0SALE_DIST_TEXT in both RSA5 and ROOSOURCE, how i can have the attributes for the same.
also i don't have attributes datasource for Customer Group1...5, Material Group1...5, sales office etc.,
Anticipating your response,
Thanks
Rafi

Servers not visible in admin console

Hello,
we have admin server and one managed server (soa_server1) up and running, but for some reason they are not visible in admin console Environment -> Servers. The list is empty...
Any idea why admin console cannot see these servers?
Can this be fixed any other way than recreating the domain?
As a consequence jdbc datasource cannot be created. Testing the database connection succeeds but after that setting the target cannot be done.
We have weblogic 10.3.3.
regards, Matti

Hello,
we rebooted the RedHat EL5 machine we have weblogic installed, after reboot Servers are visible as they should and datasource targeting for soa server succeeds.
In the same machine there's Oracle SOA Suite 11g in one domain (AdminServer, soa_server1), and Oracle Service Bus in another domain. It is a mystery why things did not work before reboot.
Thank you for the ideas how to debug and fix the problem.
regards, Matti

Data Table module enabled script is not visible in Oracle Test Manager

Hi,
Data Table module enabled script is not visible in Oracle Test Manager (OTM)
Steps to reproduce:
1.     Create new script (Oracle EBS/Forms)
2.     Enable Data Table module (Script--->Script Properties-->Modules) and save.
3.     Try to add the script in Oracle Test Manager.
Environment details:
Windows 7
OATS Version: 12.1.0.2 Build 58
IE 9
Thanks
-Pops

Hi Deepu,
I'm trying to add Data Table enabled script in Oracle Test Manager.
Data Table Module enable script is not visible in OTM.
In OATS 12.3, also i'm facing the same issue.
Thanks,
POPS

Data in CSV uploads successfully, but it is not visible after upload.

Hi,
I am using Apex 3.2 on Oracle 11g.
This is an imported application for which I am making changes as per my requirements. As I am new to Apex and even SQL, I request forum members to help me with this.
Please find below the old code for uploading data from CSV. It displays only 6 columns - Database Name, Server Name, Application Name, Application Provider, Critical, Remarks. This was successfully uploading all the data from CSV and that data was visible after upload.
OLD CODE:_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,APPNAME,APP_PROVIDER,DBID,SERVERID,CRITICAL,LAST_UPDATE_BY,LAST_UPDATE_DATE,REMARKS) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(3),
v_data_array(4),
v_dbid,
v_serverid,
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
==============================================================================================================================
Please find below the new code (which I modified as per my requirements) for uploading data from CSV. It displays 17 columns - Hostname, IP Address, Env Type, Env Num, Env Name, Application, Application Component, Notes, Cluster , Load Balanced, Business User Access Mechanism for Application, Env Owner, Controlled Environment, SSO Enabled, ADSI / LDAP / External Directory Authentication, Disaster Recovery Solution in Place, Interfaces with other application.
This is successfully uploading all the data from CSV, But this uploaded data is not visible in its respective tab.
_*NEW CODE:*_
--PLSQL code for uploading application details
DECLARE
v_blob_data      BLOB;
v_blob_len      NUMBER;
v_position      NUMBER;
v_raw_chunk      RAW(10000);
v_char           CHAR(1);
c_chunk_len           NUMBER:= 1;
v_line           VARCHAR2 (32767):= NULL;
v_data_array      wwv_flow_global.vc_arr2;
v_rows           NUMBER;
v_count           NUMBER;
v_dbid           NUMBER;
v_serverid           NUMBER;
v_sr_no          NUMBER:=1;
v_last_char          varchar2(2);
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content INTO v_blob_data FROM wwv_flow_files
WHERE last_updated = (SELECT MAX(last_updated) FROM wwv_flow_files WHERE UPDATED_BY = :APP_USER)
AND id = (SELECT MAX(id) FROM wwv_flow_files WHERE updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- For removing the first line
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
EXIT;
END IF;
END LOOP;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len )
LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
--removing the new line character added in the end
v_line := substr(v_line, 1, length(v_line)-2);
--removing the double quotes
v_line := REPLACE (v_line, '"', '');
--checking the absense of data in the end
v_last_char:= substr(v_line,length(v_line),1);
IF v_last_char = CHR(44) THEN
     v_line :=v_line||'-';
END IF;
-- Convert each column separated by , into array of data
v_data_array := wwv_flow_utilities.string_to_table (v_line, ',');
-- Insert data into target tables
--SELECT SERVERID into v_serverid FROM REPOS_SERVERS WHERE SERVERNAME=v_data_array(2);
--SELECT DBID into v_dbid FROM REPOS_DATABASES WHERE DBNAME=v_data_array(1) AND SERVERID=v_serverid;
--Checking whether the data already exist
--SELECT COUNT(APPID) INTO v_count FROM REPOS_APPLICATIONS WHERE DBID=v_dbid AND APPNAME=v_data_array(1);
IF v_count = 0 THEN
EXECUTE IMMEDIATE 'INSERT INTO
REPOS_APPLICATIONS (APPID,HOSTNAME,IPADDRESS,ENV_TYPE,ENV_NUM,ENV_NAME,APPLICATION,APPLICATION_COMPONENT,NOTES,CLSTR,LOAD_BALANCED,BUSINESS,ENV_OWNER,CONTROLLED,SSO_ENABLED,ADSI,DISASTER,INTERFACES) VALUES(:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18)'
USING
APP_ID_SEQ.NEXTVAL,
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7),
v_data_array(8),
v_data_array(9),
v_data_array(10),
v_data_array(11),
v_data_array(12),
v_data_array(13),
v_data_array(14),
v_data_array(15),
v_data_array(16),
v_data_array(17);
END IF;
-- Clearing out the previous line
v_line := NULL;
END IF;
END LOOP;
END;
============================================================================================================================
FYI, CREATE TABLE_ is as below:
CREATE TABLE "REPOS_APPLICATIONS"
(     "APPID" NUMBER,
     "APPNAME" VARCHAR2(50),
     "APP_PROVIDER" VARCHAR2(50),
     "DBID" NUMBER,
     "CRITICAL" VARCHAR2(3),
     "REMARKS" VARCHAR2(255),
     "LAST_UPDATE_DATE" TIMESTAMP (6) DEFAULT SYSDATE NOT NULL ENABLE,
     "LAST_UPDATE_BY" VARCHAR2(10),
     "SERVERID" NUMBER,
     "HOSTNAME" VARCHAR2(20),
     "IPADDRESS" VARCHAR2(16),
     "ENV_TYPE" VARCHAR2(20),
     "ENV_NUM" VARCHAR2(20),
     "ENV_NAME" VARCHAR2(50),
     "APPLICATION" VARCHAR2(50),
     "APPLICATION_COMPONENT" VARCHAR2(50),
     "NOTES" VARCHAR2(255),
     "CLSTR" VARCHAR2(20),
     "LOAD_BALANCED" VARCHAR2(20),
     "BUSINESS" VARCHAR2(255),
     "ENV_OWNER" VARCHAR2(20),
     "CONTROLLED" VARCHAR2(20),
     "SSO_ENABLED" VARCHAR2(20),
     "ADSI" VARCHAR2(20),
     "DISASTER" VARCHAR2(50),
     "INTERFACES" VARCHAR2(50),
     CONSTRAINT "REPOS_APPLICATIONS_PK" PRIMARY KEY ("APPID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R01" FOREIGN KEY ("DBID")
     REFERENCES "REPOS_DATABASES" ("DBID") ENABLE
ALTER TABLE "REPOS_APPLICATIONS" ADD CONSTRAINT "REPOS_APPLICATIONS_R02" FOREIGN KEY ("SERVERID")
     REFERENCES "REPOS_SERVERS" ("SERVERID") ENABLE
==============================================================================================================================
It would be of great help if someone can help me to resolve this issue with uploading data from CSV.
Thanks & Regards
Sharath

Hi,
You can see the installed dictionaries and change between them by right-clicking and choosing '''Languages''' inside a live text box eg. the box you are in when replying or right-clicking on the '''Search''' box on the top right corner of this page and choosing '''Check Spelling'''.

Data Servers Enabled Servers not visible

Similar Messages

Maybe you are looking for