Data services stop working after updating to new OS version for Q10

I am from Qatar, after i updated my device ( Q10 SNQ100-3 ) to new OS ( 10.2.1.537 ), the mobile data services stopped working, but it works everytime I connect to wifi. This is the same with Z10. Please need help.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Phsp CS3 - License has stopped working - How to access new install version for download?

Please help! I just finished a session with Adobe and they told me to use the Forums for a solution to my issue.
Bought a new iMac with Mavericks OS/X. Photoshop CS3 will not open due to a "license has stopped working" error message. I asked the Adobe support person for a link to download a replacement copy and he gave me a link that gives a 404 error on the Mac dmg download page,. I am ready to install PS CS3 but first need to have a usable dmg download link. The tech support person assured me that experts on this forum can help. My question is WHY did he send me to a non-working link?
Thanks for any advice you can give that really works! :-D

I get the "License has stopped working" mesages too.
We have a MacbookPro at home. There are two user-acounts on this mac, one for my wife and one for myself. This way we keep our personal stuff (e-mail, files, settings, dropbox, desktop clutter etc) separated. "Fast user switching" is enabled to easily switch to your personal account.
Now when I open Photoshop I might get the dreaded "License has stopped working" message. This will happen if Photoshop is left open in her account. So I'll have to log into her account, close Photoshop, go back into my own acount and open Photoshop again.
I should not get this message since Photoshop is not part of a particular user account, it is installed in the "Applications" folder which is accesible to all users.
What makes it even more annoying is that I get the "License has stopped working" message on trying to open Photoshop even when Photoshop is closed in in the other acount, but Illustrator is opened.
This makes no sense since we bought Photoshop and Illustrator CS3 as separate programs, not as a part of the Creative Suite.
I did not report this to Adobe yet but it wil do that now.

My cellular data has stopped working after updating to ios 6.1, i need help, urgently...!!!

This is just crazy, i just updated and now nothing works...whats wrong with apple developers, i m stuck here now! what do i do...such thing is now happening so frequently, i am never goin to get another apple product here after, I just stupid!!!! cant believe this..!

Have you tried restarting or resetting your iPHone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Wifi iPad 3 charger stopped working after updating to iOS 6, help!

Wifi iPad 3 charger stopped working after updating to iOS 6. The little iPhone charger charges it very very slowly, but the charger gets really hot after a while. I restored it and everything works but the charger. It's only a few months old, should I try a new iPad wall charger block?

Hi,
I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
Will monitor it and if no joy will go to a apple store
Thanks

Earpiece stopped working after updating to 5.0.1.

It worked fine the night before. Then it stopped working after updating to 5.0.1. I can only hear calls on speaker. Did anyone else have this problem. I have tried all the fixes, restart, reboot, restore. No debris in the headphone jack, and when volume is turned up or down it doesn't show headphones on the screen. Nothing covering the earpiece. Tried to blow out headphone jack with compressed air. I'm thinking it is a glitch in the software. Using Iphone 4 on Verizon. Any thoughts or ideas?

you can try reading the posts listed to your right in the "More Like This" box or by searching this forum.

HT201371 Touch ID stopped working after updating to IOS 7.1.

Good morning to all,
My touch ID stopped working after updating to IOS 7.1.
It was working perfectly until the update and then it stopped recognizing my prints
I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
Also the sensor is clean as well as my fingers.

Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

My Plug in "Free Download Manager" stopped working after update

== Issue
==
I have another kind of problem with Firefox
== Description
==
My Plug in = "Free Download Manager" stopped working after I updated FIrefox !
It worked fine previously ! What did I do wrong ??
**** Also I've forgotten my User name, but Firefox says that my email is registered already
I was on some other Internet provider; and have been a PC user since 1987 ! I am a Retired Network Administrator for both Microsoft NT4 & Novell 4.x Networking; and a former IS Dept. Tech' for an Orlando, FL Corp' that had over 500 PC's;
both Lap & Desk Top for some 3 1/2 yrs.
***** I CONSTANTLY RECOMMEND FIREFOX TO EVERYONE THAT IS EITHER MY CLIENT -- OR ANY OTHER CASUAL CONTACT *****
***** In fact I suggested your Browser to 3 people Today; Wed. the 14th of July 2010 *****
Respectfully;
Raymond E Bachelor
aka "New System Services"
<blockquote>Removed personal info. Please don't out yourself, or post personal info on forums. thanks! -T </blockquote>
== This happened
==
Every time Firefox opened
== I updated Firefox to the Newest Version !
==
== Troubleshooting information
==
PLEASE !!!!
SEND ME MY LOGIN INFO I have an active email entry; but I've lost track of my Username over the years !
== Firefox version
==
3.6.6
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
== Plugins installed
==
*-Shockwave Flash 10.1 r53
*Adobe Acrobat Plug-In Version 7.00 for Netscape
*Office Plugin for Netscape Navigator
*np-mswmp
*getplusplusadobe16263
*Default Plug-in
*Delivery Network Acceleration by BitTorrent™
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

I hate it when updates break things instead of fixing them. Can't Mozilla leave well enough alone? At the very least, each new release should be tested so it works with ALL PREVIOUS extensions!
Wait till you "update" to firefox 4 and EVERYthing breaks, including the buttons that come with it. There is no arrow next to the dropdown button, right clicking the tab bar doesn't bring up the correct menu, but one as though it were the menu bar (which is missing) and the information bar is missing. True, it's fast, but you'll spend weeks getting it to work properly.

Why do some apps stop working after update to iOS 6?

I notice one of my apps stopped working after the iOS 6 update, in particular Uno HD, which I paid $5 for. Why did this happen?

I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day. I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game. I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again. I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
EDIT
Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
Went to open it again, and it of course crashed back to the desktop again. So there is some issue with it that is making it unstable.
I have to keep pushing on either one of the app icons continuously until one of them starts, and then the other one will start.
Gameloft needs to do an update.
Message was edited by: Sonic Bodhi

The inspector stopped working after update

The inspector stopped working after an update. When I click on the inspector button it says "An unexpected error has occured. Please quit and reopen Keynote." Quitting and reopening Keynote does not fix the problem. Inspector does not work in Pages either (it doesn't do anything when I click on it), but it does work in Numbers. I also am having problems opening files created in Numbers before the update.

Hi jeau300!
Here is an article that can give you some tips about using your computer with your external monitor in closed clamshell mode:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/ht3131
How to disconnect your Mac notebook from the display after use:
For best results it is recommend that you put your computer to sleep before disconnecting your display.
Note: Some DVI and Mini DisplayPort displays—including Apple's aluminum-framed DVI displays and the 24-inch and 27-inch LED Cinema Displays—can be unplugged without putting the computer to sleep. If you aren't sure whether your display supports this feature, put your computer to sleep before unplugging the display.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Send Link and Mail To are stop working after update to FF v.13 on WinXP

Send Link and Mail To where stopped working after upgrade to FF13 on win XP. I'd appreciate any suggestions.
Thank you in advance

Can you check to see whether your mailto setting got changed?
orange Firefox button ''or'' classic Tools menu > Options > Applications
In the Search box above the list, type or paste '''mailto''' and pause while Firefox filters the list. On the right side, you can select your mail application. Unless it's missing. Are you able to establish the connection?

Magic mouse stopped working after update to windows service pack 1

After installing windows 7 via bootcamp and installing the windows support software everything worked fine, until i updated to windows service park 1 and my keyboard and mouse stopped working. is there way i can update without this problem..10x

how do i do this its an exe file and i cant move the mouse or use the keyboard

GPU basic features stop working after updating from version 13.0 to Photoshop version 13.1

My Basic GPU features were working flawless with Photoshop version 13.0 After I update to version 13.1 for CC members all my GPU features stop working. Is there a form to set my Photosop version 13.1 in order to use my GPU features or there is a huge difference between versions that doesn't allow me to use the GPU features? Note: I Already update my graphics card driver

Thanks for your response! these are the data that my photoshop display Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:15, Stepping:13 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2161 MHz
Built-in memory: 3001 MB
Free memory: 1383 MB
Memory available to Photoshop: 2472 MB
Memory used by Photoshop: 81 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Unavailable
OpenGL Version: 2.1
Video Rect Texture Size: 4096
OpenGL Memory: 1308 MB
Video Card Vendor: Intel
Video Card Renderer: Mobile Intel(R) 4 Series Express Chipset Family
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 2
Video Card: Mobile Intel(R) 4 Series Express Chipset Family
Driver Version: 8.15.10.2869
Driver Date: 20121004000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode:
Video Card Caption: Mobile Intel(R) 4 Series Express Chipset Family
Video Card Memory: 0 MB
Video Card Number: 1
Video Card: Mobile Intel(R) 4 Series Express Chipset Family
Driver Version: 8.15.10.2869
Driver Date: 20121004000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: Mobile Intel(R) 4 Series Express Chipset Family
Video Card Memory: 1308 MB
Serial number: 91190152077705349988
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Aaron\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
D:\, 69.6G, 38.3G free
H:\, 465.1G, 335.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/09/10-12:31:21   5.0.4   79.517869
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1686
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.0.20577   2.1.0.20577
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1681
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
Required plug-ins:
   3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   Angled Strokes 13.0
   Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Bas Relief 13.0
   BMP 13.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Embed Watermark 4.0
   Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Extrude 13.0
   FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mezzotint 13.0
   Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Pinch 13.0
   Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.1.2
   Shear 13.0
   Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Sumi-e 13.0
   Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Viveza 2 2.0.6.16608
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Wind 13.0
   Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   ZigZag 13.0
Optional and third party plug-ins:
   Camera Raw 7.4
   Color Efex Pro 4 NO VERSION
   Color Efex Pro 4 NO VERSION
   Nik Selective Tool 2.1.3.17256
   Portrait Professional 1, 4, 1, 0
   Topaz Adjust 5 10.0
   Topaz BW Effects 2 10.0
   Topaz Clean 3 10.0
   Topaz DeJpeg 4 10.0
   Topaz DeNoise 5 10.0
   Topaz Detail 3 10.0
   Topaz InFocus 10.0
   Topaz Lens Effects 10.0
   Topaz ReMask 3 10.0
   Topaz Simplify 4 10.0
   TopazRemaskAutomate NO VERSION
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE please note that with the same configuration or hardware everything related to my basic GPU usage was working flawless with the version 13.0 and that was a few hours ago! thanks again!

Internet stopped working after update

i have had my blackberry for about 4 months, i am on a sim only contract which has blackberry internet, this morning i installed the blackberry desktop manager so i could update my blackberry from version 4.6 to 5.0, wouldnt let me do it from my blackberry, dont know why. After i did this everything was working fine but my app world had gone, so i downloaded it again and it was the new version, i noticed i could update bbm, so i tried to do this, i then went out to a area which doesnt have signal for orange, so the updates cancelled, when i got back in signal it was telling me to reboot my phone, do i did this, after i did this and it came back on the internet is no longer working, instead of GRPS it says GSM and when i go to services status it says blackberry internet not connected and i cant send bbms, use facebook or the internet, im really confused and dont understand what has happened,i have tried everything but nothing works, do i need to ring Orange?

Hey sarahwilliams0,
Welcome to the forums.
If you are only getting GSM on your device then you are not getting a data connection. The best course of action is to contact your service provider for assistance.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

MBP Keys 1 to 9 stop working after update to 10.9.5

Hi,
I just update my MacBook Pro 13" mi-2012 10.9.4 to 10.9.5
Keys 1 to 9 (and associated special characters) are having problem to work. I was typping and they just stop working. When I press keys 1 to 9 a lot of time, they start working again for few seconds, and stop again.
It's very annoying
I've tried everything I could find on Apple Support (like http://support.apple.com/kb/TS1381), but the problem is still there. I've tried also to restart the computer, and to change session. Same problem.
Keys worked just fine before the update to 10.9.5
Is anyone knows or has this problem ?
Thanks.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Dell XPS 15 l502x mini-Display Port stopped working after update.

After the updates on the 11-10-2014 my mini-display port (which worked great previously and is part of the Intel Graphics) stopped working.
Am running Arch 64bit with Slim + E19
The symptoms are:
1. Detects monitor from the laptop and xrandr throws no errors
2. Enlightenment thinks the screen is connected and it appears in the screen setup as on.
3. The monitor no longer recognizes that there is a laptop plugged in and just stays off...
kernel.log
Oct 13 10:10:19 localhost kernel: [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder B
Oct 13 10:10:19 localhost kernel: [drm:cpt_serr_int_handler] *ERROR* PCH transcoder B FIFO underrun
Oct 13 14:09:35 localhost kernel: [drm] Wrong MCH_SSKPD value: 0x16040307
Oct 13 14:09:35 localhost kernel: [drm] This can cause pipe underruns and display issues.
Oct 13 14:09:35 localhost kernel: [drm] Please upgrade your BIOS to fix this. (Will look for an update...)
lspci | grep Intel | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Here are the packages that I think I may have to swap around...
[2014-10-11 19:16] [PACMAN] removed ati-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed svga-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] upgraded apache-ant (1.9.4-2 -> 1.9.4-3)
[2014-10-11 19:16] [PACMAN] upgraded libdrm (2.4.56-1 -> 2.4.58-1)
[2014-10-11 19:16] [PACMAN] installed mesa-dri (10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded wayland (1.5.0-1 -> 1.6.0-1)
[2014-10-11 19:16] [PACMAN] upgraded mesa (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded mesa-libgl (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded libva (1.3.1-2 -> 1.4.0-1)
[2014-10-11 19:20] [PACMAN] upgraded linux-lts (3.14.19-1 -> 3.14.20-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-ati (1:7.4.0-3 -> 1:7.5.0-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-intel (2.99.916-2 -> 2.99.916-3)
As far as I can see my options are to try and roll back via pacman -U in my /var/cache... or to figure out how to make my Nvidia HDMI output work using Synergy...
I suspect this is some type of driver regression (kernel/mesa/xorg) but am not sure as I have not seen much information about this issue online.
Unless someone has a better idea... when I get time to try to resolve the issue I will update this post.
Ok I missed this from dmesg:
[11671.333426] WARNING: CPU: 0 PID: 486 at drivers/gpu/drm/i915/intel_dp.c:137 intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]()
[11671.333428] invalid max DP link bw val 0, using 1.62Gbps
[11671.333430] Modules linked in: ctr ccm bnep ipt_REJECT xt_conntrack iptable_filter xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core fuse v4l2_common ecb videodev media btusb bluetooth 6lowpan_iphc coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp joydev mousedev snd_hda_codec_hdmi kvm_intel arc4 snd_hda_codec_realtek snd_hda_codec_generic kvm iwldvm snd_hda_intel snd_hda_controller crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd snd_hda_codec r8169 iwlwifi snd_hwdep dell_wmi snd_pcm sparse_keymap iTCO_wdt snd_timer snd mii iTCO_vendor_support dell_laptop microcode pcspkr dcdbas dell_smo8800 psmouse serio_raw
[11671.333467] thermal soundcore i2c_i801 shpchp evdev mac_hid mei_me mei lpc_ich wmi processor ac battery pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O) udlfb syscopyarea sysfillrect sysimgblt fb_sys_fops tun nfs lockd sunrpc fscache vhba(O) bridge stp llc brcmsmac cordic brcmutil led_class bcma mac80211 cfg80211 rfkill bbswitch(O) ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common atkbd libps2 ahci libahci ehci_pci libata xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio i915 button intel_gtt i2c_algo_bit video drm_kms_helper drm i2c_core
[11671.333506] CPU: 0 PID: 486 Comm: Xorg.bin Tainted: G W O 3.16.4-1-ARCH #1
[11671.333509] Hardware name: Dell Inc. Dell System XPS L502X/0YR8NN, BIOS A04 03/25/2011
[11671.333511] 0000000000000000 00000000c0982604 ffff8800b2b4fa80 ffffffff8152ba1c
[11671.333515] ffff8800b2b4fac8 ffff8800b2b4fab8 ffffffff8106e45d ffff880037c92000
[11671.333518] 0000000000000000 0000000000000004 ffff88014e2d8c00 ffff8801b5a2f800
[11671.333521] Call Trace:
[11671.333528] [<ffffffff8152ba1c>] dump_stack+0x4d/0x6f
[11671.333534] [<ffffffff8106e45d>] warn_slowpath_common+0x7d/0xa0
[11671.333537] [<ffffffff8106e4dc>] warn_slowpath_fmt+0x5c/0x80
[11671.333553] [<ffffffffa00f543e>] intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]
[11671.333566] [<ffffffffa00f5539>] intel_dp_compute_config+0x99/0x660 [i915]
[11671.333579] [<ffffffffa00da214>] __intel_set_mode+0xb14/0x1670 [i915]
[11671.333608] [<ffffffffa00dd4e6>] intel_set_mode+0x16/0x30 [i915]
[11671.333638] [<ffffffffa00de623>] intel_crtc_set_config+0xa83/0xdd0 [i915]
[11671.333666] [<ffffffffa0025fa1>] drm_mode_set_config_internal+0x61/0xe0 [drm]
[11671.333690] [<ffffffffa002984b>] drm_mode_setcrtc+0x2ab/0x5b0 [drm]
[11671.333712] [<ffffffffa0019b9f>] drm_ioctl+0x1df/0x680 [drm]
[11671.333728] [<ffffffff811d4db0>] do_vfs_ioctl+0x2d0/0x4b0
[11671.333737] [<ffffffff811df4ee>] ? __fget+0x6e/0xb0
[11671.333745] [<ffffffff811d5011>] SyS_ioctl+0x81/0xa0
[11671.333753] [<ffffffff815317a9>] system_call_fastpath+0x16/0x1b
[11671.333758] ---[ end trace 64be8044e26ca3c5 ]---
Last edited by scmurcott (2014-10-13 19:12:07)

So I downgraded those packages and the kernel with no luck.
I tried to get the HDMI working via Synergy... and failed
I then tested the Display Port on Windows and it did not work there either - exhibiting the same symptoms as Linux - the OS sees the monitor but no data was transferred.
So I ended up using one of my Display Link monitors at work... the USB monitors were ok, just an irritation with a flickering mouse.
I hope it is the miniDP>HDMI adapter and not the port... very frustrated by this problem.
I hope to test another adapter soon.
I think as nobody else is experiencing this issue that it may well be hardware/firmware related.
Hope there is a happy end to this post but not feeling so positive right now.

Data services stop working after updating to new OS version for Q10

Similar Messages

Maybe you are looking for