Data Services- The job server you selected is not working

Long Text:
After logging in to the Data Services designer,when try to run a job it shows error -The job server you selected is not working
Latest Software version -BODS 4.0 SP2
Reproduce Steps:
1. Double click on the Project from repository, it will display the project in Project area.
2. After that it will display all the jobs under the project.
3.Right click on the job and try to execute, then it will display the "Execution Properties" windows.
Here the we can the default Job Server has been selected.
4. Try to click ok to execute the job and then we get the error-"The job server you selected is not working"

Hi
Please contact your Data services administrator to check on the server why the job server is not working.
There might be several issues like connectivity with the repository, access details , mapping in the management console etc.
And let us know the exact issue.
Regards
Puneet

Similar Messages

Port forwarding for the Web server for outside Internet (not working , help!!!!!!)

Hello
I am trying to learn something new here. We have web server inside our organization its IP address is 172.16.0.35. We want outside Internet users to access web server, How is it possible? Please have a look at the running configuration. Web server is working inside the organization but not at outside. Our Static Public IP is 197.255.232.15 it is assigned to Inetrface Gigabit ATM0.1 and ISP default GW is 197.255.232.1. Let me know whats next? How do I make web server inside the organization available for outside Internet users. Thank you.
Building configuration.
Current configuration : 1983 bytes
! Last configuration change at 17:57:15 UTC Sat Jan 24 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router_test
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool test
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
ip access-group netin in
ip access-group netout out
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
atm route-bridged ip
bridge-group 1
bridge-group 1 spanning-disabled
pvc 0/35
encapsulation aal5snap
protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description Lan
ip address 172.16.0.34 255.255.255.224
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1454
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
login
transport input all
end
http://pastie.org/9858814

Hi Karsten Iwen
I deleted ( ip access-group netin in and ip access-group netout out) but it still does not work
my config :
Building configuration...
Current configuration : 2267 bytes
! Last configuration change at 15:43:06 UTC Wed Jan 28 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool my
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
no ip virtual-reassembly in
atm route-bridged ip
pvc 0/35
encapsulation aal5snap
no protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description
ip address 172.16.0.34 255.255.255.224
ip nat inside
no ip virtual-reassembly in
ip tcp adjust-mss 1414
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
end
Router#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 197.255.232.15:5183 172.16.0.33:5183 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5196 172.16.0.33:5196 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5602 172.16.0.33:5602 174.129.246.27:80 174.129.246.27:80
tcp 197.255.232.15:5785 172.16.0.33:5785 31.13.93.3:443 31.13.93.3:443
tcp 197.255.232.15:443 172.16.0.35:443 --- ---

Applicaton Catalog - "Cannot connect to the application server" - Existing solutions have not worked

Hi there,
I have researched the problem below extensively online and found quite a varies array of solutions offered however they all seem to relate to the problem in that someone was setting up SCCM but couldn't get it to work. My situation is different in that the
feature was working, no settings were changed however it has now stopped working.
The issue is that if any user attempts to use the app catalog, they are shown the error screen which says "Cannot connect to the application server". It then says the problem might be temporary, try again later etc however it's not temporary.
All the settings for the app catalog appear to be correct, as I would expect them to be as it was working (I am new to this company, the Desktop manager has told me it was working a few weeks ago).
Does anyone know of a service in Windows, maybe something to do with the SQL side or certificates that could cause this issue? (although I checked certificates and again, looks fine). I'm almost at the point now of just restarting the server because
if all else fails, turn it off and on again right?
Cheers all.

Hi, I just typed a long reply to this and then accidentally clicked a favourite on the Favourites bar and lost everything I typed :(
-Checked the path in IIS to the \SMS_CCM\CMApplicationCatalog folder was OK and it was.
-Checked that required .NET components including WCF are installed.
-This one seemed a bit strange but ensured local service account has access to C:\Windows\Temp (this seemed very basic and unlikely but I tried it anyway due to desperation).
-Checked that self-signed certificate was trusted by my PC attempting to access the App Catalog.
-Checked SCCM services on the server are all running (where they should be, or set to manual as appropriate).
I'm sure I've tried more than this, but these are the main things I can remember.
Cheers.

Error 16 , the help that you suggest does not work!

I had Acrobat XI monthly subscription, computer crashed, when I open my Adobe ID to download on new computer XI is not there anymore it is DC and it downloads but I get error 16 when I try to open it. Have Windows 7. I have done all the suggestions on your web site and but it still will not work. Getting very frustrated as this has been going on for 2 weeks now.
What other suggestions do you have besides: Set permissions. Did all that and that is not the issue!

Hey karenb34171070,
Since you were using Acrobat XI subscription, you are eligible to upgrade to Acrobat DC without paying any extra charges.
As you are using a subscription, you might try uninstalling and reinstalling Acrobat DC from the below mentioned link:
https://cloud.acrobat.com/acrobat
You will need to activate your subscription using the same Adobe ID credentials.
Let me know if you still face the same error.
Regards,
Anubha

The pdf file you selected is not currently supported

I keep receiving this message when I try & use the fill & sign option on documents. It was not happening yesterday. What would cause this issue?

I'm having the same issues. Frustrating!

Cascading Select Lists - Not Working for me

I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
     select state_code || ' - ' || state_desc d, state_code r
     from tbk_state
     where country_code = :P6_COUNTRY_CODE
     order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?

Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti

Data services with SQL Server 2008 and Invalid time format variable

Hi all
Recently we have switched from DI on SQL Server 2005, to DS(Date Services) on SQL Server 2008. However I have faced an odd error on the query that I was running successfully in DI.
I validate my query output using a validation object to fill either Target table (if it passes), or the Target_Fail table (if it fails). Before sending data to the Target_Fail table, I map the columns using a query to the Target_Fail table. As I have a column called 'ETL_Load_Date' in that table, which I should fill it with a global variable called 'Load_Date'. I have set this global variable in the script at the very first beginning of the job. It is a data variable type:
$Load_Date = to_char(sysdate(),'YYYY.MM.DD');
When I assign this global variable to a datetime data type cloumn in my table and run the job using Data Services, I get this error:
error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Invalid time format>.
However I didn't have this problem when I was running my job on the SQL Server 2005 using Data Integrator. The strange thing is that, when I debug this job, it runs completely successfully!!
Could you please help me to fix this problem?
Thanks for your help in advance.

Thanks for your reply.
The ETL_Date is a datetime column and the global variable is date data type. I have to use the to_char() function to be able to get just the date part of the current system datetime. Earlier I had tried date_part function but it returns int, which didn't work for me.
I found what the issue was. I don't know why there were some little squares next to the name of the global variable which I had mapped to the ETL_Date in the query object!!! The format and everything was OK, as I had the same mapping in other tables that had worked successfully.
When I deleted the column in the query object and added it again, my problem solved.

The workbook that you selected cannot be opened. The workbook may be in an unsupported file format, or it may be corrupt.

Hello folk,
I am trying to create pivot tables from an SSAS cube, in excel (Windows Authentication being used) and publishing the same to a document library in sharepoint. I am publishing only 'Pivot1'(the default name of the pivot table you create) using the Excel Services options. Similar excel sheets (containing pivot tables) are getting published to the same document library in sharepoint - the only difference being that the data is not being imported from anywhere. The error :
The workbook that you selected cannot be opened.
The workbook may be in an unsupported file format, or it may be
corrupt.
Would you like to try and
open this file in Excel? which opens perfectly when opened back in Excel.
P.S. :
The event viewer also shows a file missing event logged by sharepoint i.e. - Console Configuration File Error: File Not Found: The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
Any idea?
-Khyati

iqbalkmk and vijaynats:
Do NOT propose your own posts as answers.
The function is there so that *other people* can propose good posts as answers - not for you to propose your own posts.
(Moderator)
iqbalkmk:
Your post was in any case not an answer. Also Project Server 2010 is NOT even close to be covered in these forums. There are separate forums for SP 2010 questions but Project Server 2010 questions go in any case to the Project Server forums.
SP 2010 "FAQ" (mainly useful links):
http://wssv4faq.mindsharp.com/default.aspx
WSS3/MOSS FAQ (FAQ and Links) http://wssv3faq.mindsharp.com/default.aspx
Both also have links to extensive book lists and to (free) on-line chapters

How does the codepage of the job server and the datastore work together?

<p>In Data Integrator, a datastore can be used as a source or a target of an ETL transaction (called dataflows). The dataflow is executed by a single job server. During reading or loading, Data Integrator will "transcode" from the datastore codepage to the codepage of the job server. As you can imagine, you will need to be careful when selecting the codepage of the job server, as it will need to be able to represent all characters you are trying to read/load. In other words, the codepage of the job server MUST be a SUPERset of all codepages used in all datastores which that job server may encounter.</p><p>If Great Big Company Inc. selected MS1252 (which supports many western languages including English) for the job server, Great Big Company Inc. would potentially lose characters coming in from the Korean customer database. That's why it is recommended that you choose UTF-8 for the job server when processing a mix of multi-byte / single-byte data. UTF-8 will be able to map to all of the characters used in both source databases. </p><p> </p>

It is slightly difficult to post the code as it is a huge project. I think the issue is connected with the actual 3D control, as when I copy it and paste it into another blank vi, it shows the same behavior. I have tried to attach a vi where I copied the indicator from my program and put some dummy data in. I keep getting an error 'The contents of teh attachment doesn't match its file type' . I guess I need help attaching the vi.
When I do, the following wll be true...
I've also put a few of the property nodes into the vi to see what impact they have.
Basically, run the vi and look at the data. On my screen the points look a sort of muddy brown color. With the 'fast draw' option selected, when I click and drag on the graph, the labelling disappears and the points change color to reflect the values seen on the color pallete indicator. Changing the colors in the Scatter Color Ramp control has the expected effect of chaging the plot colors, but only in the fast draw case. I want the colors to be there all the time, but cannot find the magic trick to set the pallette for the points when not in 'fast draw' mode, i.e. clicked and held.

ABAP Code for Backup the entire table data in the application server

Hello Friends,
I have to create the table data Backup and Store the entire table data in the application server and also be able to restore the data back if needed.
this should be dynamic program for any table based on the table name given on the application server.. I have developed a program for this but its having problems with the Quantity, amount. Its not writing it correctly at the application level.
ANy Suggestions on this.
Below is the program for this.
Thanks,
Ster.
* Report YWMM_TABLE_DUMP                                             *
REPORT ywmm_table_dump .
TABLES :
        dd03l.
* Type spool declaration
TYPE-POOLS:
        abap, slis.
DATA: i_table_data1 TYPE REF TO data.
DATA : it_dd03l LIKE dd03l OCCURS 0 WITH HEADER LINE.
*DATA : gt_fieldcat TYPE lvc_s_fcat.
DATA : i_fcat      TYPE STANDARD TABLE OF lvc_s_fcat,
       l_dr_line         TYPE   REF TO data,
       l_v_as4vers       TYPE as4vers.
FIELD-SYMBOLS: <f_table_data1>     TYPE STANDARD TABLE,
               <f_wa_table_data1> TYPE ANY.
SELECTION-SCREEN: BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
PARAMETERS: rb_copy RADIOBUTTON GROUP map DEFAULT 'X',
            rb_rest RADIOBUTTON GROUP map.
SELECTION-SCREEN: END   OF BLOCK bl1.
SELECTION-SCREEN: BEGIN OF BLOCK bl2 WITH FRAME TITLE text-002.
PARAMETERS: p_table TYPE tabname OBLIGATORY,
            p_plfld TYPE dd03l-fieldname.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_bkfile TYPE localfile OBLIGATORY.
SELECTION-SCREEN: END   OF BLOCK bl2.
PERFORM get_data.
IF rb_copy = 'X'.
PERFORM backup.
ELSEIF rb_rest = 'X'.
PERFORM database_update.
ENDIF.
*&      Form get_data
FORM get_data.
CLEAR   i_fcat.
REFRESH i_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
            i_structure_name = p_table " Table Name
       CHANGING
            ct_fieldcat      = i_fcat
       EXCEPTIONS
            OTHERS           = 1.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog = i_fcat
IMPORTING
    ep_table        = i_table_data1.
IF sy-subrc = 0.
    ASSIGN i_table_data1->* TO <f_table_data1>.
ELSE.
    WRITE: 'Error creating internal table'.
ENDIF.
IF rb_copy = 'X'.
    SELECT * FROM (p_table) INTO CORRESPONDING FIELDS OF
              TABLE <f_table_data1> UP TO 20 ROWS.
ELSEIF rb_rest = 'X'.
    CREATE DATA l_dr_line LIKE LINE OF <f_table_data1>.
    ASSIGN l_dr_line->* TO <f_wa_table_data1>.
*Get Data from Application Server
* Opening the dataset P_BKFILE given in the selection screen
    TRANSLATE p_bkfile TO LOWER CASE.
    OPEN DATASET p_bkfile FOR INPUT IN TEXT MODE." ENCODING DEFAULT.
    IF sy-subrc NE 0.
*    MESSAGE:
    ELSE.
      DO.
* Reading the file from application server
        READ DATASET p_bkfile INTO <f_wa_table_data1>.
        IF sy-subrc = 0.
          APPEND <f_wa_table_data1> TO <f_table_data1>.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
* Closing the dataset
      CLOSE DATASET p_bkfile.
    ENDIF.
ENDIF.
ENDFORM.                    " get_data
*&      Form backup
*       text
* --> p1        text
* <-- p2        text
FORM backup.
TRANSLATE p_bkfile TO LOWER CASE.
OPEN DATASET p_bkfile FOR OUTPUT IN TEXT MODE.
IF sy-subrc NE 0.
    WRITE: text-017.
    STOP.
ELSE.
    LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
      TRANSFER <f_wa_table_data1> TO p_bkfile.
    ENDLOOP.
ENDIF.
CLOSE DATASET p_bkfile.
ENDFORM.                    " backup
*&      Form database_update
FORM database_update.
DATA : i_mara_u TYPE STANDARD TABLE OF mara WITH HEADER LINE,
         i_ekpo_u TYPE STANDARD TABLE OF ekpo WITH HEADER LINE,
         i_eban_u TYPE STANDARD TABLE OF eban WITH HEADER LINE,
         i_resb_u TYPE STANDARD TABLE OF resb WITH HEADER LINE,
         i_plpo_u TYPE STANDARD TABLE OF plpo WITH HEADER LINE,
         i_stpo_u TYPE STANDARD TABLE OF stpo WITH HEADER LINE,
         i_vbap_u TYPE STANDARD TABLE OF vbap WITH HEADER LINE,
         i_vbrp_u TYPE STANDARD TABLE OF vbrp WITH HEADER LINE,
         i_lips_u TYPE STANDARD TABLE OF lips WITH HEADER LINE,
         i_afvc_u TYPE STANDARD TABLE OF afvc WITH HEADER LINE,
         i_asmd_u TYPE STANDARD TABLE OF asmd WITH HEADER LINE,
*           i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
         i_qmel_u TYPE STANDARD TABLE OF qmel WITH HEADER LINE,
         i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
         i_esll_u TYPE STANDARD TABLE OF esll WITH HEADER LINE,
         i_t165_u TYPE STANDARD TABLE OF t165 WITH HEADER LINE,
         i_t165e_u TYPE STANDARD TABLE OF t165e WITH HEADER LINE,
         i_twpko_u TYPE STANDARD TABLE OF twpko WITH HEADER LINE,
         i_tpext_u TYPE STANDARD TABLE OF tpext WITH HEADER LINE,
         i_ce4mxpa_u TYPE STANDARD TABLE OF ce4mxpa WITH HEADER LINE,
         i_ce4mxpa_acct_u TYPE STANDARD TABLE OF ce4mxpa_acct WITH
                                                         HEADER LINE,
         i_zaim_u TYPE STANDARD TABLE OF zaim WITH HEADER LINE,
         i_s012_d TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
         i_s012_i TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
         i_dummy TYPE STANDARD TABLE OF mara.
CASE p_table.
    WHEN 'MARA'.
*     Non-Key
      PERFORM move_to_table USING   <f_table_data1>
                            CHANGING i_mara_u[]
                                     i_mara_u.
      PERFORM update_table USING i_mara_u[].
ENDCASE.
ENDFORM.                    " database_update
*&      Form move_to_mara
FORM move_to_table USING    p_tab_from TYPE STANDARD TABLE
                   CHANGING p_tab_to   TYPE STANDARD TABLE
                            p_w_table.
DATA: l_wa_fcat TYPE lvc_s_fcat.
FIELD-SYMBOLS: <f_field_from> TYPE ANY,
                 <f_field_to>   TYPE ANY.
LOOP AT p_tab_from ASSIGNING <f_wa_table_data1>.
    LOOP AT i_fcat INTO l_wa_fcat.
      ASSIGN COMPONENT l_wa_fcat-fieldname
     OF STRUCTURE <f_wa_table_data1> TO <f_field_from>.
      ASSIGN COMPONENT l_wa_fcat-fieldname
     OF STRUCTURE p_w_table TO <f_field_to>.
      <f_field_to> = <f_field_from>.
    ENDLOOP.
    APPEND p_w_table TO p_tab_to.
ENDLOOP.
ENDFORM.                    " move_to_mara
*&      Form update_table
FORM update_table USING p_table_update TYPE STANDARD TABLE.
SELECT SINGLE *
    FROM dd03l
   WHERE fieldname = p_plfld
     AND tabname   = p_table
     AND keyflag   <> 'X'
     AND as4local = 'A'
     AND   as4vers = l_v_as4vers
     AND   ( comptype = 'E' OR comptype = space ).
IF sy-subrc = 0.
*   Do update
    IF NOT p_table_update IS INITIAL.
      UPDATE (p_table) FROM TABLE p_table_update.
      IF sy-subrc = 0.
        COMMIT WORK.
      ELSE.
        ROLLBACK WORK.
        WRITE: text-003.
        STOP.
      ENDIF.
    ENDIF.
ELSE.
*delete and insert.
    IF NOT p_table_update IS INITIAL.
*      DELETE (p_table).
      IF sy-subrc = 0.
        INSERT (p_table) FROM TABLE p_table_update.
        IF sy-subrc = 0.
          COMMIT WORK.
        ELSE.
          ROLLBACK WORK.
          WRITE: text-018.
          STOP.
        ENDIF.
      ELSE.
        ROLLBACK WORK.
        WRITE: text-018.
        STOP.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    " update_table
Edited by: Julius Bussche on Jul 18, 2008 1:43 PM
Please use a meaningfull subject title!

ARS,
I am struggling a bit to get this.
there is a syntax error,
Field "FIELDS_INT-TYPE" is unknown. It is neither in one of thespecified tables nor defined by a "DATA" statement.
Again you have asked to move to a diffrent table. What is that table and how to build it.
    LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
      LOOP AT i_fcat INTO l_fcat.
        IF l_fcat-inttype EQ 'P'.
          ASSIGN COMPONENT l_fcat-fieldname
              OF STRUCTURE <f_wa_table_data1> TO <f_field>
              TYPE     fields_int-type
              DECIMALS fields_int-decimals.
        ELSE.
          ASSIGN COMPONENT l_fcat-fieldname
              OF STRUCTURE <f_wa_table_data1> TO <f_field>
              TYPE     fields_int-type.
        ENDIF.
        " Move <f_field> to a new table and use this table for download
      ENDLOOP.
      TRANSFER <f_wa_table_data1> TO p_bkfile.
    ENDLOOP.
Ster

Working with data services on remote server (not just deploying)

Hi!,
Is this possible? I'm used to work directly agains remote servers, but it seems flash builder 4 data services doesn't like it in development phase.
I know I can deploy my services to a remote server for production, but want to do the same in development phase, work against remote data service. Could anyone suguest any tip?
Thanks in advance,
HexDump.

Hello HexDump;
If I understand your question correctly - you are trying to connect to a remote server to use its data during development. What type of data are you working with and how do you connect to it?
For example if you are using php/mySQL on your remote server and you are using data services and a callresponder, you can put in the endpoint in your service (see below example). *This might change in newer revisions.
<fx:Declarations>
<users:Users id="users" destination="users" endpoint="http://www.yourdomain.com/gateway.php"
fault="Alert.show(event.fault.faultString)" showBusyCursor="true" source="users"/>
<s:CallResponder id="loginUserResult"/>
</fx:Declarations>
John

Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.

Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

Object failed to run due to an error while processing on the Job Server

when i am scheduling a report ith email notification i am getting below error
error msg: Object failed to run due to an error while processing on the Job Server
i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.

hi prithvi,
i am able to schedule reports to other destinations and reports are delivered as per the requirement.
i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
have to check errors on log file....
@ COULD YOU PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY AFTER RUNNING REPORT.

Java.Lang.nullpointerexception issue only isolated to a repository on the job server

I am having the
"Java.Lang.nullpointerexception" error message issue only isolated to a repository on the job server.
This error message appearing when i try to execute or create a new schedule for a job on mgmt console.
I have few other repositories in the same server, with those repositories i am not having any issues, in terms of executing a job or creating a new schedule.
Does any one had the similar issue, and know how to resolve it.
Thanks a lot for the helpful info.

Hello George / Viacheslav, thks to both for responding.
BODS is based on 4.0 never was migrated from 3.2
Under this repository almost 30 jobs currently running with no issues, which were created and scheduled before this error started.
THis error message started just two months ago, since then it is not allowing any new jobs to be executed or creating any new schedules.
But all prior jobs are running fine no issues.
FRom designer i am able to execute with no problem, This issue is only happening on Mgmt console and only in this repository.
Repository name has no apostrophe, all repsositories have the same style naming convention.
"BODS_THENAME"
Here i am pasting the block from viewsoure, where the error is:
<span nowrap class="viewContext">Repository: BODS_JBROOK</span><table class="viewcontrollerarea" style="height:1"><COLGROUP><COL width="100%"/></COLGROUP><tr><td class="viewcontrollerheaderspacer"></td></tr><tr><td class="viewcontrollerheadertabarea"><table class="viewcontrollertabs"><tr class="viewcontrollertabs"><td class="viewcontrollertabs"><img border=0 src="../images/tab_sel_left.gif"></td><td class="selectedTab" nowrap background="../images/tab_sel_center.gif" ><a class="selectedTab" href="/DataServices/servlet/AwBatchJobExecute?REPOSITORY_NAME=BODS_JBROOK&GUID=7cb34824-6d1f-42cc-9968-6c69d006ee87&NAME=Job_TestRaghuRepo&HISTORY=%2FDataServices%2Fservlet%2FAwBatchJobHistory%3FREPOSITORY_NAME%3DBODS_JBROOK%26SHOWREPO%3D2%26ACTIVE_VIEW%3DBatch%2BJob%2BConfiguration&ACTIVE_VIEW=Execute+Batch+Job">Execute Batch Job</a></td><td class="viewcontrollertabs"><img border=0 src="../images/tab_sel_right.gif"></td></tr></table></td></tr><tr bgcolor="#7997CD" ><td height="2px" class="viewfont" VALIGN=CENTER width="100%"></td></tr><tr><td class="viewcontrollermain"><div id="tipDiv" class="tipdiv"></div><span class="viewMessage">java.lang.NullPointerException</span><br><span class="viewMessage"> </span><br>

Transaction code used to upload the data in the application server SCM syst

Hi
Could you please anyone tell me the transaction code which has been used to upload the data into the application server in SCM ( APO) system from presentation server.
For ex : R/3 system CG3Y , CG3Z has been used to upload the data into application server similarly way could you please tell me the transaction code is used in the APO system for uploading the data into application server.
Thanks advance for your support.
Regards,
Kiran

try tcode SXDA_TOOLS - copy
(1st you must fill all obligatory fields)
A.

Data Services- The job server you selected is not working

Similar Messages

Maybe you are looking for