Data source is not activated!!!!

Hi Friends,
Currently we are workig on BI 7.0 version and trying to upload flat file data. We have created Datasource for Flatfile source system and activated ( 100% sure about activation). But when we trying to give selections for the Fields in the infopackage screen it was saying the above said Datasource is not in Active version ( Even thoug that was activated properly).
We are wondering about this in the data souce tree it was cleary showing as activated , but in the infopackage it was stating that is not activated.
Please look into this one and give your valuable suggestions.
Thanks in advance...

Solved by own

Similar Messages

Posting date in AFRU and 2lis_04_p_arbpl data source is not matching

Hi Experts,
We are facing an issue with 2LIS_04_P_ARBPL data source, posting date in AFRU table and in data source is not matching.
For example: we booked an activity confirmation of value 100 on 01.01.2015 posting date, Counter 1, Operation 10
For the same operation another counter is confirmed on 01.02.2015 posting date.
So, in AFRU table:
Prod Order     Operation     Confirmation Number     Counter     PostingDate     Activity
1001               10               8001                             1              01.01.2015       100
1001               10               8001                             2              01.02.2015       0
In 2lis_04_p_arbpl data source, counter field is missing due to which only 1 record is coming which is:
Prod Order     Operation     Confirmation Number     Counter     PostingDate     Activity
1001               10               8001                             1              01.02.2015       100
In data source, activity of value 100 is coming on 01.02.2015 date instead in AFRU table it is booked on 01.01.2015 posting date by which we are unable to match the value in query which is based on posting date.
Please help on this.
Thanks,
Sameer

Hi Sameer,
Please check on which date the production order has status as "completed".
It could be on 01.02.2015.
Thanks,
Vimal

Data source does not exist

Dear all,
am extracting the data from Vistex datasource,IRM/LIS_RM_IPCRASP IP CR Agreement Conditions
after activating in RSA5 i can able to see in RSA6
but while activating the data source after the extract structure has successfully generated,
the system showing data source does not exist
plz help me

hi,
when i click the maintain button save button will appear,
but in my case this save button not highlighting...
when i check in ST22 the system proposed error mesage is table illegal statement,
i found this error in many forums but its not related to datasource actvation,
plz anyone giv me solution as soon as possible...
regards
Edited by: gadhatharan thirunavukkarasu on Oct 15, 2011 7:57 AM

OBDC Data Source Error - Data source name not found and no default driver specified

Hello,
I get this error whenever I try to use the "Modify Microsoft Access Database" tab to update my
Access 2000 database after a conversion:
Unable to connect to target database.
java.sql.SQLException: [Microsoft] [ODBC Driver Manager]
Data source name not found and no default driver specified
Now, the weird thing is that when I log in as Administrator and go to the "Control Panel" there is
no "ODBC Data Sources" option to chose from. So I went to the "Microsoft ODBC Administrator"
from the "Configuration and Migration Tools" tab instead. I tried configuring "omwb_msaccess"
under the "User DSN" tab with both the name of my Access file, and the "small.mdb" file that was
in the omb directory. No go for either one. Whatever I try I still get the same pop-up box.
Question:
(1) What should I be putting for the "ODBC Data Source" when I try to Migrate my Access Database?
(2) Any other idea/configuration issue I might be missing that could do this? The process works up
to the Access Update point, and I configured the repository correctly.
Thanks
Aaron - [email protected]

Nope, I'd already tried both of those things. I checked again, but no go.
I think the problem may be that I'm not entering the right value in the
"ODBC Data Source" field on the Migration Workbench "Modify Microsoft
Access Database" form - the same one where you enter a "Username" and
"Password" for the conversion. What should I be entering here? What is
the standard filename?
The log files aren't very informative to me. Here is the odbcconf.log:
==============
ODBCConf called with arguments: '/S /Lv odbcconf.log /F C:\WINNT\System32\mdaccore.rsp'
Data Struct:
     Reboot First : 0
     Use Response File : 1
     Response File : 'C:\WINNT\System32\mdaccore.rsp'
     Erase Response File: 0
     Silent : 1
     Continue on Error : 0
     Log Mode : 2
     Log File : 'odbcconf.log'
     Actions:
          8, '(null)', '(null)', ''
          6, 'MS Code Page Translator|Translator=MSCPXL32.dll||', '(null)', '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
          5, 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||', '(null)', '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
          1, 'Microsoft ODBC for Oracle', 'CPTimeout=60', '"Microsoft ODBC for Oracle" "CPTimeout=60"'
          17, 'simpdata.tlb', '(null)', '"simpdata.tlb"'
EXECUTING ACTIONS
Executing Action: INSTALLDRVRMGR
          arg1: '(null)'
          arg2: '(null)'
          args: ''
Install Driver Manager succeeded
          Return HR: 0x0
Executing Action: INSTALLTRANSLATOR
          arg1: 'MS Code Page Translator|Translator=MSCPXL32.dll||'
          arg2: '(null)'
          args: '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
INSTALLTRANSLATOR SQLInstallTranslatorEx succeeded
          Return HR: 0x0
Executing Action: INSTALLDRIVER
          arg1: 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||'
          arg2: '(null)'
          args: '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
INSTALLDRIVER SQLInstallDriverEx succeeded
          Return HR: 0x0
Executing Action: CONFIGDRIVER
          arg1: 'Microsoft ODBC for Oracle'
          arg2: 'CPTimeout=60'
          args: '"Microsoft ODBC for Oracle" "CPTimeout=60"'
CONFIGDRIVER SQLConfigDriver succeeded
          Return HR: 0x0
Executing Action: REGTYPELIB
          arg1: 'simpdata.tlb'
          arg2: '(null)'
          args: '"simpdata.tlb"'
          Return HR: 0x0
===========
Here is a snippet from the error.log:
==========
** Oracle Migration Workbench
** Release 9.2.0.1.0 Production
** ( Build 20020308 )
** ORACLE_HOME: c:\
** user language: en
** user region: US
** user timezone: PST
** file encoding: Cp1252
** java version: 1.1.8.16
** java vendor: Oracle Corporation
** o.s. arch: x86
** o.s. name: Windows NT
** o.s. version: 5.0
** Classpath:
c:\\Omwb\olite\Oljdk11.jar;c:\\Omwb\olite\Olite40.jar;C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;c:\\Omwb\jlib;c:\\Omwb\jlib\Omwb.jar;c:\\Omwb\jlib\oembase-9_2_0.jar;c:\\Omwb\plugins\SQLServer6.jar;c:\\Omwb\plugins\SQLServer7.jar;c:\\Omwb\plugins\SQLServer2K.jar;c:\\Omwb\plugins\Sybase11.jar;c:\\Omwb\plugins\Sybase12.jar;c:\\Omwb\plugins\MSAccess.jar;c:\\Omwb\plugins\MySQL.jar;c:\\Omwb\drivers\mm.mysql.jdbc-1.2a;c:\\Omwb\plugins\Informix7.jar;c:\\Omwb\drivers\ifxjdbc.jar;c:\\Omwb\plugins\db2400v4r5.jar;c:\\Omwb\drivers\jt400.jar;c:\\lib\xmlparserv2.jar;c:\\rdbms\jlib\xsu111.jar;c:\\jdbc\lib\classes111.zip;c:\\lib\vbjorb.jar;c:\\jlib\netcfg.jar;c:\\jlib\ewt3.jar;c:\\jlib\ewtcompat-3_3_15.jar;c:\\jlib\share.jar;c:\\jlib\help3.jar;c:\\jlib\oracle_ice5.jar;c:\\jlib\kodiak.jar
** Started : Tue Jul 23 12:13:42 PDT 2002
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
** The following plugins are installed:
** Microsoft Access Release 9.2.0.1.0 Production
** Active Plugin : MSAccess
** Shutdown : Tue Jul 23 12:14:59 PDT 2002
I appreciate any assistance you could render me.
Thanks - Aaron

ALE Change Pointers in source system not active

Hi All,
I am trying to load 0COSTELMNT using deltas. The initial load is OK and then i use a delta and it fails and i get the error:
"ALE Change Pointers in source system not active"
I have carried out the following steps in an attempt to resolve the problem - but it didnt. Anyone have any advice??
(1) Checked BD61 to confirm whether the change pointers are active
(2) Checked BDCP to confirm the number range is maintained
(3) Checked SALE (Activate change pointers for message types) to confirm whether the change pointer has been activated for the type we need:
COCOKA Control segment CO object/cost element
COELEM Cost element master data
(4) In transaction snum, Selected number ranges and confirmed the intervals are setup
No. 01
FROM: 0000000001
TO: 0000009999
(5) Activate transfer structure
(6) Replicate Datasources
Thanks,

If you are transferring master data from source system, the BD61 setting on the source system should be checked.
Why it has been unchecked - not sure (likely someone did it by mistake).
It shouldn't have any effect on txnl delta. What will be effected though is that you will have lost delta of the ALE based data sources for the period this setting was unchecked.

Source system not Active error while installing BI content cube

Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.

Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams

"Source is not Active" when creating DTP from Datasource (BI. 7.0)

Hello,
I need to load data to ODS from a ZTable. Version 7.0
This is what i have done so far:
- Created a ZTABLE. (OK)
- Loaded data via function modules through excel macros. (OK)
- Created DataSource(ZGDRDS01) from a ZTABLE in RSO2. (I guess OK)
- Create DataTransfer Process - (NOK)
       Source of DTP
         Object Type : DataSource
         DataSource : ZGDRDS01
         Source System: BWD
    - Error Message: Source ZGDRDS01 of BWD(type DTASRC) is not active (like if it didnt exists)
(I didnt find any Activate button in RSO2)
Somebody else did something similar before and created its own DataSource, that one I can use, but i need to create my own.

Thank you for your fasts answers! That seemed to be part of the problem.
Did you create Transformation which is a prereq for creating a DTP ?
- No i didnt create the transformation first, but the problem was the same. When I created a Transformation it asks me for the DataSource and back again to "source is not Active".
New problem:
I went to SourceSystem and replicated the datasources,
- Know it appears just below the other one that was previously working.
- However it appears with status Inactive and there is no Activate Button.
- Something went wrong with the version because the column "M = A Version" appears =/=, for my new Datasource. I right click on it -> Replicate Metadata but didnt help. Any other option marks me something lik is not Active or
   "The DataSource ZGDRDS01 (BWD) does not exists in object version A"
if i right clic -> Display
Version = Modified (yellow)
I deleted the datasource and generated it again with the same result.
¿do you know how to fix this?
P.S ¿Should I post a new thread for this problem?

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

Visual Composer 7.0: system (data source) does not appear

Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...

Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...

SQL Server Reporting Services: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.

Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

The connection string for coded UI Data driven test using excel data source is not working

Hello,
I am using the visual studio 2012 coded UI test, i added the following connection strings to connect to an excel data source:
[DataSource("System.Data.Odbc", "Dsn=Excel Files;Driver={Microsoft Excel Driver (*.xls)};dbq=C:\\Users\\shaza.said.ITWORX\\Desktop\\Automation\\On-track Automation Framework\\On-track_Automation\\Automation data file.xls;defaultdir=.;driverid=790;maxbuffersize=2048;pagetimeout=5;readonly=true",
"Sheet1$", DataAccessMethod.Sequential), TestMethod]
[DataSource("System.Data.Odbc", "Dsn=Excel Files;dbq=|DataDirectory|\\Automation data file.xls;defaultdir=C:\\Users\\shaza.said.ITWORX\\Desktop\\Automation\\On-track Automation Framework\\On-track_Automation\\Automation data file.xls;driverid=1046;maxbuffersize=2048;pagetimeout=5",
"Sheet1$", DataAccessMethod.Sequential), TestMethod]
But i get the following error:
"The unit test adapter failed to connect to the data source or to read the data. For more information on troubleshooting this error, see "Troubleshooting Data-Driven Unit Tests" (http://go.microsoft.com/fwlink/?LinkId=62412) in the MSDN Library.
Error details: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified"
Thanks,
Shaza

Thanks for Adrian's help.
Hi shaza,
From the error message, I suggest you can refer the Adrian's suggestion to check the date source connection string correctly.
In addition, you can refer the following about how to Create a Data-Driven Coded UI Test to check your issue:
http://msdn.microsoft.com/en-us/library/ee624082.aspx
Or you can also try to use a Configuration File to Define a Data Source for coded UI test.
For example:
<?xml
version="1.0"
encoding="utf-8"
?>
<configuration>
<configSections>
<section
name="microsoft.visualstudio.testtools"
type="Microsoft.VisualStudio.TestTools.UnitTesting.TestConfigurationSection,
Microsoft.VisualStudio.QualityTools.UnitTestFramework, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
</configSections>
<connectionStrings>
<add
name="ExcelConn"
connectionString="Dsn=Excel Files;dbq=E:\Unit Test\AddClass\AddUnitTest\add.xlsx;defaultdir=.;
driverid=790; maxbuffersize=2048; pagetimeout=60;"
providerName="System.Data.Odbc"/>
<add
name="ExcelConn1"
connectionString="Dsn=Excel Files;dbq=E:\Unit Test\AddClass\AddUnitTest\sum.xlsx;defaultdir=.;
driverid=790;maxbuffersize=2048;pagetimeout=60"
providerName="System.Data.Odbc"/>
</connectionStrings>
<microsoft.visualstudio.testtools>
<dataSources>
<add
name="ExcelDS_Addition"
connectionString="ExcelConn"
dataTableName="Addition$"
dataAccessMethod="Sequential"/>
<add
name="ExcelDS_Multiply"
connectionString="ExcelConn1"
dataTableName="Multiply$"
dataAccessMethod="Sequential"/>
</dataSources>
</microsoft.visualstudio.testtools>
</configuration>
For more information, please see:https://msdn.microsoft.com/en-us/library/ms243192.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Created new data source, does not appear in the list

Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
thanks
Srinivas

Hi
I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
- If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
- It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
- Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
thanks
Srinivas

Linked Server [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hi I have SQL2012 installed on my local machine and have also installed MySQL 5.6.23 installed with a test database.
I also have my SQL connector installed and MYSQL ODBC Driver 3.51.
Which happily connects to the Mysqldb.
The Datasource Name : mySQL conn
TCP/IP Server : localhost and Port :3306
User root
with pwd
On the SQL side I have used the following
EXEC master.dbo.sp_addlinkedserver
@server = N'MYSQLSRV',
@srvproduct=N'mySQL conn',
@provider=N'MSDASQL',
@datasrc=N'mySQL conn'
However when I try to selet using open query
SELECT * FROM OPENQUERY ( [MYSQLSRV], 'SELECT * FROM students' )
it comes back with
OLE DB provider "MSDASQL" for linked server "MYSQLSRV" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MYSQLSRV".
I cant understand what I have done wrong . Any help in this would be great as Ive hit a bit of a brick wall

Hi Robert3975,
In addition to other post, please also note the following things.
1. If you use the 32-bit driver on a 64-bit machine, please run the 32bit version of "odbcad32.exe" by running "c:\Windows\SysWOW64\odbcad32.exe"
from Start/Run menu and
create your ODBC DSN. However, for the 64-bit driver, use c:\windows\system32\odbcad32.exe to create your ODBC DSN. For more details, please review this similar
thread.
2. Expand the folder Providers under Linked server directory in SSMS and go to properties of MSDASQL provider and configure it properly as described in this blog:
Creating Linked server to MYSQL from SQL Server.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Connect to MS Access using NetBeans, data source name not found!

Hi
NetBeans IDE 7.3 and OS was Windows 7 (64-bit )
When I run my program by NetBeans, it complain about the following errors.
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
In fact, the MS Access file had exist the specify path, I can run the jar file (not in IDE environment) and connect to MS Access DB successfully.
And I had search from network, and found it said "the ODBC source was run by different server", one was C:\Windows\SysWOW64\odbcad32.exe for 32-bit and c:\windows\system32\odbcad32.exe for 64-bit.
So the question is, why IDE cannot connect to MS Access DB, How to set NetBeans IDE to make it connectable to 32 bits or 64 bits ODBC, like the program run without IDE?
Thanks!

user13005878 wrote:
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedThat reads like "your datasource configuration is not good, fix it"
And I had search from network, and found it said "the ODBC source was run by different server", one was C:\Windows\SysWOW64\odbcad32.exe for 32-bit and c:\windows\system32\odbcad32.exe for 64-bit. It would make a whole lot of sense if that was the other way around, don't you think? SysWOW64 for 64 bits and system32 for 32 bits.
So the question is, why IDE cannot connect to MS Access DBBecause something is wrong
How to set NetBeans IDE to make it connectable to 32 bits or 64 bits ODBC, like the program run without IDE?By setting the correct connection configuration properties.
I'm not 100% positive, but I believe that doing ODBC connections from a 64 bits environment is not actually supported in Java. You may be outraged by that - in Java 8 the ODBC-JDBC bridge is going to be completely dropped, no more connecting to Access from Java without third party libraries (which tend to be commercial). In any case for now try to use a 32 bits Java runtime if you're using a 64 bits one.

IDT ODBC Error - Data source name not found...

Hello,
In the IDT, I have created a successful connection to a Relational Connection to my SQL Server datasource. However, when I try to access the data in the Data Foundation, I get the error, "ODBC Driver Manager. Data source name not found and no default driver specified. I am trying to use a shortcut to the connection in the repository. I am able to make a local connection to this database using the same steps above but I'm only getting this error when using the respository connection.
I appologize if I have not explained this well or used the right terminology as I've only been using this tool for about a month with very little support. The support I do get does not know what this problem is as they are able to connect to it fine on their computer.
Thank you for your time and responses,
Aaron

Hi Aaron
This is the product limitation.
Combination of 32-bit and 64-bit data providers in a Multi-source enabled Data Foundation is not supported.
Remove ODBC Drivers 32-bit for SQL Server from the user's workstation and Install ODBC Drivers
64-bit.
Regards,
Veer S.

Data source is not activated!!!!

Similar Messages

Maybe you are looking for