Data Source to upload plan data for CO_OM_CCA_: CC: Costs and Allocations

Hi Guru's,
We have Data source that which upload Actual data for CCA (0CO_OM_CCA_1 - Cost Centers:cost and allocations).  Every time it is full upload before loading the data deletion of previous load request will be done.
One more information required that i have checked in the BW cube for plan data it is available in the info cube for one cost center and rest of the costcenter i don't have the data now the users are requesting to upload the plan data for rest of cost centers.
Now as per the business requirement the users are requesting to upload the plan data in to the same i am not sure whether it will pull the plan data with actuals in to BW cube. Is there any alternate with the same data source or else is there any specific data source for uploading Costs and Allocations plan data
Please suggest me how can i go a head with this requirement.
Thanks in Advance.
Ganni

You can use the same datasource to load plan/budget data to the cube for all the costcenters. And regarding the actuals, you can use 0CO_OM_CCA_9 datasource to load to actuals cube and create a multi on top of both plan and actuals cube for reporting purposes.

Similar Messages

  • Upload plan data for balance sheet accounts

    Hi Experts,
    Is there a way to upload plan data for balance sheet accounts? I can upload revenue/cos and expenses through the profit center and cost center uploading but need to upload balance sheet accounts as well. Any  help would be much appreciated. Thank you.

    Loading balance sheet accounts using the Excel load to profit center tells me that I selected balance sheet accounts that cannot be entered manually. Not sure what this means... if I have an accounts receivable account, how would I find another equivalent account?

  • Upload Plan data for GL account

    We want to upload plan data for the GL accounts so that the plan data shows with the actual data in the financial statement.
    The question is what is name of the program/tcode
    1. To upload plan data for GL accounts?
    2. To upload plan data in the cost center accounting?
    3. Most important - to transfer plan data from cost center accounting to GL accounts? Currently we have a custom program to upload plan data to CCA.
    Thank you very much in advance
    Praful

    You can plan at GL level using T code GP12N, Planning profile SAPFIGL & summary table GLT0. You will have to define plan version & planning period in t code OBP6.
    Once plan is entered the same will be available in FI reports e.g. F.01
    For Cost center plan use t code KP06. Alternatively you can activate excel integration for planning profile and upload from excel.
    Regards
    Rakesh Pawaskar
    Message was edited by:
            Rakesh Pawaskar

  • MDW Disk Usage for Database Report Error - A data source has not been supplied for the data source DS_TraceEvents

    Hello,
    On the MDW Disk Usage Collection Set report, I get the following error when I click on a database hyperlink.
    A data source has not been supplied for the data source DS_TraceEvents
    SQL profiler shows the following SQL statements are executed (I've replaced the database name with databaseX)
    1. exec sp_executesql N'SELECT
    dtb.name AS [Name]
    FROM
    master.sys.databases AS dtb
    WHERE
    (dtb.name=@_msparam_0)',N'@_msparam_0 nvarchar(4000)',@_msparam_0=N'databaseX'
    this returns zero rows as databaseX does not exist on my MDW central server, but is a database on a target server (i.e. one that is being monitored and uploaded into the MDW central server).
    2. USE [datatbaseX]
    this produces the following error:
    Msg 911, Level 16, State 1, Line 1
    Database 'databaseX' does not exist. Make sure that the name is entered correctly.
    why is the report looking for the database on my server?
    thanks
    Jag
    Environment: MDW (Management Data Warehouse) on SQL 2008 R2

    Hi Jag,
    Based on my test, while this database is offline, we will encounter this issue. This is because that while we click the certain database in “Disk Usage Collection
    Set” report, it will query some information with that certain database. If this database is offline, we will not access this database to acquire related information and generates this error.
    Therefore I recommend that you check the status of this database by using this system view:
    sys.databases. If it is not online, please execute
    the following statements in a new window to make this database to be online:
    USE master
    GO
    ALTER DATABASE <database name> SET ONLINE
    GO
    If anything is unclear, please let me know.
    Regards,
    Tom Li

  • PowerPivot report data refresh error Data source as SharePoint list Data Feed

    Hi All,
    I am facing a problem on auto refresh, the report data source is SharePoint list Data Feed, I saved it my PC desktop when I set up auto fresh it fails then I moved the SharePoint list data feed "atomsvc" file to A SharePoint Data feed library then connected
    to report started a manual refresh it was success, after next schedules it failed.
    Error massage:
    Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used: 
    The network path was not found. ;The network path was not found. The network path was not found. . 
    A connection could not be made to the data source with the DataSourceID of '82f49f39-45aa-4d61-a15c-90ebbc5656d', 
    Name of 'DataFeed testingreport'. An error occurred while processing the 'Testing Report' table. The operation has been cancelled.  
    Thank you very much !
    erkindunya

    If you are using Claims Auth then this is a known limitation.  Auto refresh only works under Classic Auth.
    I trust that answers your question...
    Thanks
    C
    http://www.cjvandyk.com/blog |
    LinkedIn | Facebook |
    Twitter | Quix Utilities for SharePoint |
    Codeplex

  • As a mobile me user I uploaded my photographs for clients to view and download. How do I do this in ICloud?

    As a mobile me user I uploaded my photographs for clients to view and download. Can and how do I do this in ICloud?

    You can't.  The Gallery service in MobileMe does not exist in iCloud.  You will need to switch to another photo hosting web site.

  • Steps for implementing PM Order Cost and allocation Report

    Hi experts,
      I would like some of the experts to suggest prior steps involved in implementing PM Order Cost and allocation Report?
      Is there any specific PM documentatio other then help.sap.com documentation?
    Thank you
    arun

    Hi,
    the CO-Sources (and PM is similar there) deliver plan and actual costs in different rows separated with the characteristics 0VTYPE and 0VERSION (this one separating different versions of plan data) in your case you will get in your transactional data:
    ServiceOrder   0VTYPE    SWG (i leave the rest of the keys and attributes out)
    SO1000          20             15.000 €   for your plan date
    SO1000          10             10.000 €   that are your actual data
    so what wil happen if 0VTYPE is not a Key in your DSO is that first the plan record is updated in DSO and then the second actual record overwrites this value becaus both have the same key SO1000.
    You have to define carefully what keys you use in DSO to avoid this. If you can try create a test-Cube on base of the DataSource fields and look how the data are displayed in there because a cube regards all fields as key's.
    regards
    Christoph

  • Table for total actual cost and total actual revenue.

    Hi Gurus,
    Can anybody pls tell me what is the table for total acutal cost and total actual revenue for a service order.
    Thanks in advance.
    Regards
    Satish

    Check COSP

  • Which data sources I need to use for Actual&Plan comparision of GL Account?

    Could you please let me know which datasources I need to use for Actual & Plan comparision of GL Account data?
    Current SAP BI version is BI 7.0.
    As per my knowledge, I am thinking of using the datasources 0CO_OM_CCA_1 for Plan data & 0FI_GL_10 for Actuals.
    Is this right?
    I have one more question here:
    While extracting the data from ds 0CO_OM_CCA_1, I am getting only the Profit & Loss Account data where as the Balance Sheet Account data is not coming.
    And also there is some confusion in VTYPE because the standard ds 0CO_OM_CCA_1 is giving the data with Value type 10 is & Version 000.
    As we all know the VTYPE '10' stands for Actuals then how can we say that this ds 0CO_OM_CCA_1 gives Plan data?
    Please clarify.

    Hi,
    Basically 0CO_OM_CCA_1 data source is used to extract actual, plan, and commitments.
    This data is differentiated with value type, you can see sap note 523742 for more details on value type.
    For balance sheet accounting data check the below link,
    [http://help.sap.com/saphelp_nw04s/helpdata/en/5d/ac7d8082a27b438b026495593821b1/content.htm]
    Regards,
    Durgesh.

  • Best practice data source from ECC 6.0 for legal consolidation in BPC NW7.5

    Hi there,
    after scanning every message in this forum for "data source" I wonder if there isn't any standard approach from SAP to extract consolidation data from ECC 6.0. I have to say that my customer is not using New g/l so far and therefore the great guide "how to get balances from ECC 6.0 ..." does not fully work for us.
    Coming from the old world of EC-CS there is the first option to go via the GLT3 table. This option requires clever customization and the need to keep both GLT0 and GLT3 in line. Who has experiences regarding maintenance of these tables in a production environment?
    We therefore plan to use data source 0FI_GL_4 which contains all line items to the financial documents posted. Does this approach make sense or will it fail because of performance issues?
    Any help is appreciated!
    Kind regards,
    Dierk

    Hi Dierk,
    Do you have a need for the level of detail provided by the 0FI_GL_4 extractor? Normally I would recommend going for the basic 0FI_GL_6 extractor, which provides a much more manageable data volume since it only gives the periodic activity and balances as well as a much smaller selection of characteristics. Link: [http://help.sap.com/saphelp_nw70/helpdata/en/0a/558cabb2e19a4db3097b81bba4fd0e/frameset.htm]
    Despite this initial recommendation, every client I've had has eventually had a need for the level of detail provided by the 0FI_GL_4 extractor (or the New G/L equivalent - 0FI_GL_14). Most BW systems can handle the output of the line-item extractors without much issue, but you should test using production data and make sure your system sizing takes into account the load.
    The major problem you can run into with the line-item extractors is that if your delta somehow gets compromised it can take a very long time (days, sometimes weeks) to reinitialize and this can cause a large load in your ECC and BW system. Also, for the first transport to production, it is important to plan time to initialize the delta.
    Ethan

  • Upload planned data via excel

    Hi Expert,
    I tried to upload the data in excel via 7KEX but encountered some problem.
    I have followed the below link and create the planner profile and layout and excel format.
    http://help.sap.com/saphelperp60_sp/helpdata/en/e9/254f2815b311d2a5610060087a7a87/frameset.htm_
    However, I keep having problem linking the file description and the generic file name. Can someon give a more detailed step on how to create and save the file description and link it to the generic file name ?
    I keep having the warning message "file name XXXX.xls does not extist" when i save the settings in KP34PC.
    Thanks.
    Angel

    Hi Angel,
    Well !!! I am wellversed with this Excel uploading process and help you by explaining the process in below steps..
    1). Create Planing Layout for Profit center in 7KEA transaction Code
    2).  EC-PCA Maintain Planned Profiles in transaction code KP34PC
    3). In KP34PC transaction code, First you enter your planner profile name and save.
    4). Then Select the planner profile which you have created in step 3 and double click on Profit Center Accounting folder left hand side.
    5). In the subsequent screen, select new entries button and select the planning area Cost/Revenues & Give the CUDK and QTDK and also select document type - P0
    6). After the above step Save once
    7). Then select the Planning area Cost/Revenues step and double click on Layouts for Controlling folder from left side
    8). In the next screen, select new entries button and enter the item 10 or some other number you can give. Select the Planning layout which you have created for this. Select Overview & Integrated check box
    9). Select the above item and Double click on Default parameters
    10). In the next screen, you should give the Version - Planning period, Fiscal year and company code, Profit center and Accounts if there any
    11). Select Form Based radio button
    12). Now press F5 button or Overview Screen button. Now the system will generate teh File Description and take you to next screen where you can see Excel opened
    13). In that screen first select Check button to know the consistancy of the profile. It will give message saying that it is consistant like that
    14). No select Generic File button. You will get one pop up. There you have to give some name. For example - SAPFICO*.TXT and then Press enter.
    15). Next From the menu select File Description option --> under that select --> SAVE ALLL option
    16). Now DONT DO ANYTHING after 15th step and simply select BACK ARROW. Now you will be coming to parameters screen. You just select save button in the Parameters Button.
    17). From the Parameters screen, select Back arrow to come back to Layouts for Controlling (Planner profile configuration screen)
    18).  In the Layouts for Controlling screen you can be able to see your  File Description which you have created. Now Dont forget to SAVE in this screen.
    After the above configuration, Before loadoing the file into the system, you have to select your planner profile in 7KEX screen - Other wise, system will not identify you file description and throw an error.
    Let me know if you still face any issues..
    Thanks
    Fit 4 Nothing

  • XML and Web Service Data Source Missing in Crystal Reports for VS

    I would like to use a Web Service as the data source for a Crystal Report that will be running outside of my Visual Studio application.  So setting the data source to the web service in code is not possible.  My understanding is Crystal Reports has a connection (in the Database Expert under New Connection) named XML and Web Service.  Here you can select web service and enter the WSDL URL for the web service.  However it does not appear in the list for Crystal Reports for Visual Studio.  Does this connection type come with the Visual Studio version of Crystal Reports and if not is their a way to obtain it? 
    Thank you for your assistance.

    None of the bundled versions of CR have the driver. Reason is that the driver responsible for these connections requires the Java framework and I suspect MS would not be too pleased if we installed the Java framework. The stand alone versions, since they are not part of any bundle can and do install the Java framework and the driver. Note that even the latest release of CR - CRVS2010 does not have the driver as it essentially becomes a bundle or a VS2010 plug-in.
    So, the short of it is; you have to obtain a stand-alone version of CR. I'd recommend CR 2008 (12.x) as CRXI R2 will run out of support in June of this year.
    - Ludek

  • Data Source errors with OLE DB for Oracle

    We tried to install Oracle 10g 10.2.0.1.0 x64 Client for Windows on:
    Microsoft Windows Server 2003 Enterprise x64 Edition Service Pack 1 (64 bit)
    SqlServer 2000 Enterprise Edition SP4 (32-bit)
    When trying to create a Data Source (from a UDL file or Analysis Services) we get the following errors:
    "Provider is no longer available. Ensure that the Provider is installed properly"
    "Test connection failed because not all properties can be set. Window Handle (BAD VALUE)"
    The Oracle Client install completed "Successfully" and ODBC connections work fine. Also, tnsping works fine. Just the OLE DB connections are failing.
    Any help greatly appreciated.
    Thanks,
    J

    Maybe you can try the below method to configure the oracle provider for OLEDB.
    1.Open SQL Server Management Studio
    Click on the + to expand the tree for the <Machine Name> SQL Server. Where <Machine Name> is the name of the machine where Microsoft SQL Server is installed on.
    The first level of the tree is called <Machine Name> SQL Server,
    The second level of the tree is called Linked Servers,
    The third level of the tree is called Providers.
    a list of Providers are shown.
    Right click on the Oracle Provider for OLEDB and select Properties.
    Check the check boxes for "Dynamic Parameters" and "Allow InProcess".

  • Why do SQL sample programs work when there is no entry for the data sources in the ODBC Data Source Administrator that are used by the sample program?

    Hi,
    I am trying to understand how to access an SQL database from CVI.  
    I don't understand how the sample programs shipped with the toolkit can access the database they use if it is not listed in the ODBC Data Source Administrator.
    In the code, I see the line:
    hdbc = DBConnect ("DSN=CVI SQL Samples");
    However, there is not an entry that I can find in the ODBC Administrator for "CVI SQL Samples."
    The SQL help suggests there should be a User DSN named, "CVI32_Samples", but I don't see that entry in the ODBC Administrator on my win-7 system.
    I believe the sample program is accessing a database file named, "C:\Users\Public\Documents\National Instruments\CVI\Samples\sql\samples.mdb".
    Exactly how is the call to DBConnect() translated to the file, "samples.MDB", if there is no entry in the ODBC Administrator?
    Regards,
    Mark 

    I figured it out.  There is a 32 bit ODBC administrator and a 64 bit ODBC administrator.  The ODBC administrator I run through the control panel is the 64 bit ODBC administrator. To access the 32 bit administrator I need to run, "C:\Windows\SysWOW64\odbcad32.exe".
    I am running the samples in 32 bit mode, so I need to use the 32 bit ODBC administrator.
    Best,
    Mark

  • How to Define a Data Source in a Standard Way for EJB 3.0?

    I have an EJB 3.0 project that I want to deploy to different kinds of servers. I got it to work for OC4J, but when I tried to deploy it to JBoss I found out really quick that there are actually no data sources defined in my EJB Jar and that JDeveloper does not (that I am aware of) define data sources by default in a portable way.
    I could be wrong on this. Not sure. Any info for explicitly defining data sources for EJB 3.0 in a portable way would be greatly appreciated.
    Thank You,
    KurzHome

    Frank,
    Thanks for your response. I will try that.
    One thing I am confused about is how to link the EJB and the data source name. Unless I am missing something obvious, I can't find a configuration setting that explicitly states that my Entity EJB uses XYZ data source (when using OC4J). Where is this defined? Also, what configuration do I add to to my EJB or other file to link it to the JBoss defined data source?
    Thanks,
    KurzHome

Maybe you are looking for