DATA TARGET LOADING IN BI7

i am new to bi 7.0
i am having data in psa which i got from data source
now i want to load to cube
how to proceed

Hi Vishal,
Go to the context menu of the Data target and create transformations , where in u will be giving the datasource , and source system name.
Maintain the transformations according ur requirement. If u dont have to maintain any routines or manipulations, then straightaway link up the respective Datasource objects to the Dataatrget objects.
Activate them, on the DTP icon double click, and customise the parameters in DTP according to ur requirement, like full load / delta.. package size etc.
Then activate it.
Create an infopackage on the Datasource and load the data -> monitor for success -> execute the DTP-> check for the success( i. e Green).
ones its success u r job is done.
Assign points.
Regards,
ND

Similar Messages

  • How to load data targets through process chain

    hello gurus,
    i am new to bi7.0 environment,
    can anyone provide me step by step loading of data targets with the help of process chains.
    its very urgent
    thanks in advance
    bharath kumar

    Hi,
    After creating Start variant, select Data Targets in left side, find out which one you want to create PC. Drag and drop that Data Target ODS into right side, and select info package and ods activation.
    For Master data also the same you have select Attr Change run.
    Connect the links from Start variant to data targets.
    Check the below links:
    http://help.sap.com/saphelp_bw33/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_bw33/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/dc/c7e542de327276e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
    Business Intelligence Old Forum (Read Only Archive)
    Reg
    Pra

  • Can u give clear steps how to load 3 data target at a time by the help of p

    can u give clear steps how to load 3 data target at a time by the help of parllalesim

    hi,
    create the load infopackage type and give the infopack you need to load.
    create 3 similar process types.
    chain should have this flow
    start -> delet index(if cube is the target) -> load target(connect the load process to start process) parallel -> and process -> create index(if cube)/actiavtion of ods(if ods)
    Ramesh

  • Error "cannot load request real time data targets" for new cube in BI 7.

    Hi All,
    WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
    I am using BI 7.0 for first time and ahve the following issue:
    I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets". 
    I checked cube type in setting in infcune is shows as Standard.  When I doube clicked on error the following message showed up
    You are trying to load data into a real-time InfoCube using a DTP.
    This is only possible if the correct load settings have been defined for the InfoCube.
    Procedure
    In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
    I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
    Thanks
    KV

    Hi Kverma,
    Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
    Real Time data Target can be loaded With Data; Planning not allowed &
    Real Time data Target can be Planned; Data loading not allowed
    You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
    Regards,
    Kams

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Error while loading data to ODS in BI7

    Getting such following errors when loading data to ODS through DTP(Data Transfer Process) in BI7.     
    Runtime error while executing rule -> see long text RSTRAN     
    Record filtered because records with the same key contain errors     RSM2
    and many so on...
    source system is ok no problem with the connection part.
    plz help.

    Hi Anup.
    Probably your records are not Unique, while you have told the system they should be.
    Try to move a discrimination characteristic from data fileds to key fileds.
    Or
    Try to set the "duplicate reords allowed" setting in your datasource (tab "General Settings" Delivery of Duplicate Data Recs. = Allowed)
    Udo

  • Problem in Flat file transaction data loading to BI7

    Hi Experts,
    I am new to BI7, got problem in activating data source for transaction data and create transfer routine to calculate sales revenue which is not there in flat file but flat file has got price per unit and quantity sold.
    Flat file fields are:
    Cust id   SrepID  Mat ID  Price per unit  Unit measure  Quantity   TR. Date
    cu100    dr01      mat01         50                 CS              5     19991001       
    created info objects are
    IO_CUID
    IO_SRID
    IO_MATID
    IO_PRC
    IO_QTY
    IO_REV
    0CALDAY
    When i created IO_QTY, unit/curency was given as 0UNIT. In creation of DS, under fields tab, extra field CS was shown I did confuse to which object should i map it. and at the same time when i enter IO_QTY its prompting one dailogbox with 0UNIT, so i said ok. Now i can't map CS to unit as system created automatic ally 0UNIT when i enter IO_QTY. Could you please give me solution for this and procedure to enter formulae for calculating Sales revenue at this level instead of query level. Your solutions will be more appreciated with points.
    Await for ur solutions
    Thanks
    Shrinu

    Hi Sunil,
    Thanks for your quick response. I tried to assign the infoobjects under the fields tab in creation of DS. I have not reached to data target yet.
    Could you please answer to my total question.
    Will you be able to send some screen shots to my email id [email protected]
    Thanks
    Shri

  • Is it possible to load a request already updated in the data target ?

    Hi Experts,
    Question: load a request which is already updated in data targets and data mart status is set
    Data flow:
    source system -
    > ODS1 -
    > Infocube1
    Now, requests are first loaded into ODS1. Then these request are loaded into Infocube1.
    Now, i deleted the request in the Infocube1.
    Is it possible to reload the request from ODS1 to Infocube1 ?
    Please suggest how.
    Regards,
    Suraj S Nair

    Hi  Masthan Kaniganti          ,
    It is possible to load the data but not same request.
    The reason why we can not load the request is in ODS level delta resords are updated ,hence with the selection condition we have to load the present and previous data.
    and one more thing...
    If you are deleted request in Cube level means, we can reconstuct the same  request via reconstruction tab.. 
    Hope this helps you...let me know if you any further ifo on this..
    Best Regards,
    maruthi

  • Load status in PSA "Request not updated to any data target using delta"

    Hi,
    I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
    There are lot of requests are there in PSA but some of them loaded with status
    u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
    Others u201CRequest not updated to any data target using deltau201D  -- need to delete
    We are deleting manually every week end.
    Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
    Thanks for your help in Advance,
    Raj.

    Hi Rajesh,
    You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
    Best Regards,
    Bansi.

  • Data Load in BI7.0

    Hello Gurus,
    I am new to SAP. I want to load data into BI 7.0 from a source system but I dont want to use PSA.  Could you please let me know how it can be done.
    Thanks in advance.

    Hello,
    This depents on the Setup.
    DTP & Transformation -> You have to use the PSA then you can Load the data to Data Target.
    Update Rules & Transfer Rules  -> You can directly load the data to Data target without using PSA,
    Thanks
    Geeta

  • Master data loads Request not updated to any data target using delta

    When checking the PSA the request updated ICON has red triangle and the mouse over says
    "Request not updated to any data target using delta".
    I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1.  DTP has not been implemented yet. The system was just upgraded in July.  I am unable to schedule deletes from the PSA for successful loads.  However, I think the data is updating to the info objects.  My Info package has the selection to PSA then in the InfoObject package by package.  
    How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
    Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

    Hi shikha,
    The load has not failed but I am unable to delete the load from the PSA.
    If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
    Thanks for the reply.
    Regards,
    JoeM

  • Data will be load to data target  by company code wise .

    Hi,
    I have a requirement,"The data will be load to data target(Info Cube)by company code wise .
    so any one can provide me the ABAP code.
    Regards,
    Venkata Sharma.

    Hi Sharma,
    There is no problem you can do it in R/3 and also in Transfer rules.
    Hope this helps
    Assign points if useful
    Regards,
    venkat

  • Data loading of 0vendor from PSA to Data Target(info object)

    Dear Friends
    Here I have one problem that..i have loaded the master data 0vendor data is coming upto PSA but not going to data target i.e info object .
    Here I am giving the system message in RSMO (status tab)
    <b>Processing in Warehouse timed out; processing steps missing
    Diagnosis
    Processing the request in the BW system is taking a long time and the processing step has still not been executed.
    System response
    <DS:DE.RSCALLER>Caller  is still missing.
    Procedure
    Check in the process overview in the BW system whether processes are running in the BW system under the background user.
    If this is not the case, check the short dump overview in the BW system.</b>
    Yesterday also I got this error is it concerned to BASIS guy or have to do in BW.
    I remind you this is daily job .
    Thanks and Regards
    Rajasekar

    Hi Manfred
      Thanks for you response..
      i checked in ST22 i didnt find short dump and in RSMO i find <b>transfer(Idocs and trfc):Errors occured,
    Data Package 1 : arrived in BW ; Processing : Data packet not yet processed</b> in details tab..i have activated transfer rules also..data is available in PSA..in infopackage tab i have selected full update
    and in Processing tab:i find
    Data Package 1 ( 11442 Records ) : Errors occurred
    also showing transfer rules with red button.
    so if u give any solution for above problem i will be highly thankful to you
    Thanks and Regards
    Rajasekar

  • Load the data to Data targets wtihout  PSA

    Hi BWGURUS,
    I am facing one problem. I loaded the data with out checking PSA option i.e I selected the
    radiobutton option Data Targets Only under the processing tab in the scheduler(maintain
    infopackage). Unfortunately the data upload falied. My problem is how can i view the data
    now, where the error records stored. If any one faced this problem Please let me know.
    Thanks and Regards
    Satish

    Satish,
    You can only see the messages in the monitor. Data records cannot be seen.
    If the transfer method was IDOC, which I doubt, then the IDOCs can be seen through the monitor under the transfer tab.
    Cheers
    Aneesh

  • Load PSA & data targets in parallel and dialog processes

    We have noticed that when we load data into BW using the processing option: PSA and Data targets in Parallel, that the system basically uses all available dialogue processes on the application server that it 
    is running on.  On systems where we only have one application server, this obviously renders the server useless for anything else. In addition we have seen that even when we have additional application servers, the system is still virtually useless and extremely slow.  We would like to be able to use this option for large data loads, as it theoretically can allow these large loads to complete in a shorter amount of time.     
    However, this issues we see cause us to be hesitant to use it, as we cannot afford the system to be affected so negatively while they are running. (we are bascially a 24x7 shop for users).                      
    Is this the behavior that is expected?                                  
    Is there some way that we can limit the number of processes this mode   
    consumes?
    Are we missing something?

    It is a basis setting, but you can limit the amount of processes one user is using in parallel.
    As I'm not basis, I don't know the setting, but we were able to pull it off at my current client.
    kr,
    Tom

Maybe you are looking for