Data transfers from SRM to R/3

Hi,
i have follwing questions?
1. How date transfer from SRM to R/3?
2. Why PO transfer throught RFC? why not IDoc? and why confirmation and invoices are transfer using IDOC?.
3. config document for EBP-SUS?
Thanks
Rams

Hi Rams,
The data transfers between SRM using ALE (Application Link Enabling) via RFC & IDOCs...
P.O is transferred to R/3 using RFC. Confirmation and invoice through IDOCs.
Since P.O is the leading document and of course legal document, there should not be any duplication. Means if it generates two P.O numbers one in SRM & the other in R/3 they are considered as two different P.Os.And will be an issue during audit.
Where as confirmation and invoice posting documents are internal documents and the docs created in the back end with the back end number range. In this case same number is not mandatory.
Hope this makes you more clear.
Award points for helpful answers.
Rgds,
Teja

Similar Messages

Getting data transfered from old HD to new ones, leaving 2 slots filled . .

Hello,
*(Below is a thread I started in another forum, but, didn't get my final questions answered (see at bottom of this post in BOLD), and am hoping for further help and suggestions. I know there is a lot to read here, but, I think this information will help other novices, such as myself. Thanks!)*
I have 2 new HDs (each 1T) uninstalled, and I have my old HD (160 gigs) currently residing in one of the two slots in my G5. Any ideas on the best way/process to get the data transfered from the old HD to the new ones, leaving my two slots filled with the 2 new drives AND my data from the old HD transfered and intact, with a RAID0 setup?
OR, are there any other suggestions on a good setup with the 2 new HDs??
I'm open to suggestions.
I always back-up on external HDs, so, is their a need for me to worry about setting up a RAID0??
I'm doing video processing for DVD release.
Should I just max out the 2x1T gig HDs and not worry about a HD failure??
All Suggestions welcomed!!
Thanks, Jack
*FROM THE CUTTERMAN:*
You are limited with only 2 drive slots. In this scenario what usually works best is a small fast drive (eg Velocirapter or SSD) for OSX/Applications and a large drive for video files. It is not advisable to have the operating system running from a striped array.
Since you already have the drives, here is what you can do.
Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions. Be sure that it is GPT-formatted so it can boot.
Use CarbonCopy Cloner to copy your current OSX partition to the new one.
Set the startup disk as the new partition.
Remove the old drive and replace it with the second new one.
Reboot, and partition/format new drive.
*Hey Cutterman,*
Thanks for the advice. That sounds like a good set-up. I'll have to research the process of doing what you've advised, but, should work out ok:
A. Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions:
1. Partitions are done under Disc Utilities correct? Never done it before; will take a look.
B. Be sure that it is GPT-formatted so it can boot.
2. GPT is also done under Disc Utilities, correct? Here I start to get a bit confused, as I've formatted Extended Journal, SO, the partition with the OSX & Applications is formatted GPT, and the rest of the HD is formatted as Extended Journal?
C. Use CarbonCopy Cloner to copy your current OSX partition to the new one.
3. So, I partition the first new HD and use Carbon Copy Cloner (also under Disc Utilities) to copy the OSX & Applications from my original HD to the first new HD, correct?
D. Set the startup disk as the new partition.
4. This will be an option when I setup the partition???
E. Remove the old drive and replace it with the second new one.
F. Reboot, and partition/format new drive.
5. QUESTION: So, you recommend not striping the HDs: If I do a RAID 1, which sets up a mirror of the HDs, and since the first new HD is partitioned with the OSX & Applications, AND is set up as the Startup Disk, then the second new HD will also mirror that?? Another QUESTION: Even if the second new HD does not mirror the OSX & Applications, the second HD will only mirror the space/partition not utilized by the OSX & Applications partition, correct?
Thanks for your help!!
Jack
*FROM THE CUTTERMAN:*
OK I will try to answer your questions. To begin, if you want to mirror the 2 drives then you will need to boot from the SL install DVD or an external (USB/firewire) drive to set it up. IMO for your purposes it is too much hassle and a waste of HD space.
1) Yes partitions are created in Disk Utility
2) Yes, you choose a volume Scheme (ie number of partitions) and size them by dragging the separator bar. Then select the planned boot partition and click Options..., then choose GPT. I think it is usually the default but check and make sure. Extended journaled is the usual format.
3) You need to download Carbon Copy. It is a free tool that will copy the entire image of your current system partition to the new one and make it bootable. Consider making a donation as it is a very useful and frequently updated utility. It is fairly intuitive to use. You can also use the restore feature in Disk Utility but I have had more experience with Carbon Copy.
4) Once the copy process is finished the new boot partition will show up under the startup disk selections (this tool is in System Preferences).
*FROM 666Sheep:*
If may i correct one thing: OP, don't choose GPT (GUID Partition Table). You got PPC Mac (G5), so valid partition type for you is Apple Partition Map (APM).
GPT is for Intel Macs and you will not able to boot from this kind of partition.
*FROM THE CUTTERMAN:*
Thanks for the correction- my bad. No familiarity with non-Intel Macs.
G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD
*Hi All,*
*Since this process will come to a head on Tuesday/Wednesday, and I hope to be successful in transferring Old HD data to new HD/s.*
*A: I'm still a little foggy here, as I thought I'd set up the 2 new T-gig HDs so that if one of them failed, I'd still have the data backed up on the other HD; more ideas concerning this would be reassuring:*
*WHAT DOES "IMO" mean?*
*(IMO for your purposes it is too much hassle and a waste of HD space.)*
*As I understand the points made: After I partition the first new HD, and Carbon Copy data from old HD, I then install second new HD, and this will just act as an overflow from the first partitioned HD, correct? Because, if set up a Raid1/Mirror, the OSX partitioned portion of the first new HD will not copy to the second new HD, and that space on the second new HD will be wasted, correct?*
*Also: I have to set up RAID1 (if I do not set up RAID0), correct?*
*RAID 1*
*From WIKI: RAID 1 mirrors the contents of the disks, making a form of 1:1 ratio real time mirroring. The contents of each disk in the array are identical to that of every other disk in the array. A RAID 1 array requires a minimum of two drives.*
*Carbon Copy is a free tool that will copy the entire image of your current system partition to the new one and make it bootable.*
*1. Is my old HD partitioned? Is that done automatically by MAC prior to PC purchase?*
*2. Do I Carbon Copy the whole old HD or just parts? (eg. OSX, Photo Shop, After Effects, Various Files)*
*3. I read that it is necessary to DEACTIVATE Photo Shop (I have CS3) prior to doing Carbon Copy. Is that correct? If so, does this also apply to other Adobe applications? Such as After Affects, Illustrator??*
*Thanks to all for the help!!*
*G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD*

Confusing Information:
A1: You also want to make sure the drive you are backing up to is formatted Mac HFS Extended (HFS+) if using Mac OS 8.1 or above.
A2: On PowerPC Macs, your clone should be partitioned as Apple Partition Map.
*Q? I thought the new HD (1T) should be formatted in Extended Journaled?*
B: Also disable Spotlight (in 10.4 only) on your destination drive using Apple menu -> System Preferences -> Spotlight -> Privacy to add the destination drive to the pane.
*Q? I'm using 10.4.11, so, I should follow these instructions?*
C: If possible, boot into safe mode to perform the backup (holding the SHIFT key at startup). In addition, you can clone while logged into another administrative user that you don't use at all to avoid further complications of changes which may be happening to your regular user (though don't use Fast User Switching to get into that other user, since that other user is still active when fast user switching is used). Otherwise you are going to be running a backup on a live system which could have changes happening while you are attempting to backup. These may yield an imperfect clone, with uncertain success at recovery. It may be possible that your clone will have its own hardware issues, so make at least two copies.
*Q? ?????????????*
*I GOT THE ABOVE INFO. FROM THE FOLLOWING SITE:*
Making a clone/mirror/duplicate backup
http://www.macmaps.com/backup.html#SHORTANDEASY
*ALSO, WHAT DO YOU THINK ABOUT THE ADVICE ON THIS PAGE:*
http://www.levoltz.com/2010/04/21/how-to-transfer-data-to-your-new-hard-drive/

Doc type and drilldown Consolidate data transfered from FI

Dear all members,
I config doc type for data realtime update from FI.
But when i run report CX34, doc type of data transfered from FI to EC-CS is blank.
And I can't drilldown this data.
Please show my mistakes
Many thanks,
Orchid
Edited by: Orchid675 on Jul 2, 2010 5:12 AM

Dear Orchid,
in EC-CS the document number and the document type will be new, the doc type info will not be updated so the original FI doc type will disappear.
Typically, in EC-CS all reported financial data (so documents from FI) will be updated with the same doc type at posting level SPACE (realtime update) or 00 (all other).
I hope my question helps.
Ciao,
David

How to delete Master Data transferred from ECC to APO via CIF

Hi, all
I'm connecting SCM 5.1 with ECC 6.0 via CIF.
When activating Integration Model in ECC, the following error occurred;
"Location 0001 of type 1001 (BSG 592BUSGP) already exists in APO"
This is because Location 0001 was already transferred from different ECC client via CIF, and not cleared.
I'm now trying to initialise master data transferred from ECC to APO via CIF, but in vain.
I suppose I have to first delete all master data CIFed from ECC in APO, or have to execute initialisation of APO master data with ECC data in ECC.
Please tell me how to do this.
For details, please read the followings;
I connected APO client with ECC client 590.
I transferred Plant and Material Master from ECC to APO via CIF.
After that, I wanted to change ECC client from 590 to the other.
I created the other client (592) by client-copying from 590 with SAP_ALL copy profile.
I deactivated Integration Model in ECC 590, and activated the same in ECC 592.
Here, I faced the problem.
The initial data transfer failed due to the duplicate of data.
Now I'm wondering how I can initialise master data in APO and transfer initial data from ECC.
Due to testing purposes, I have to change ECC clients from one to the other this time, but I cannot initialise master data in APO and cannot tansfer initial data from different ECC client.
thanks in advance,
Hozy

Hi all,
Thank you very much indeed for lots of your replies.
Thanks to all of your advices, I'm getting to understand what to do.
Well, I'll say I have to create one more client for testing with other ECC clients or I have to rebuild the client by client-copying from 001 and implementing all transportation requests, for marking del flags to each master data and running del programme sound like tough work, and sound like odd ..
Then, I've got next issue here.
In SCM-APO, I use BI objects, and , if I have to create several clients for testing, I have to set up clients where you can use both BI objects and CIFed master data.
I suppose I have to change 'BWMANDT' in RSADMINA and make RSA1 accessable in other SCM clients and implement tests.
Also, I have to register BI System for newly created SCM clients in RSA1-SourceSystem.
Well, if you have any experiences on this kind of use, and if you have any advice on it, please give me any tips.
Particulary, I'd appreciate very much if you give me advice on which way you have chosen; creating several clients or rebuilding the one client in SCM-APO when you use both BI objects, CIFed master data and Demand Planning.
Thanks in advance.
Hozy

Vendor data transfer from SRM to R/3.

Hi,
I create a Business partner in SRM, I need to transfer it to R/3 ????
Pls advice how to transfer the same.
regds
pavan.

Hi,
Pls see the foll thread for solution/workarounds:
Re: Self registered Bidders to be transferred to ECC
Other related threads:
Tranfer vendor data from SRM to ERP (R3 / ECC)
Vendor replication from SRM to R/3?
External Vendor replication from SRM to R/3
https://forums.sdn.sap.com/click.jspa?searchID=571462&messageID=1487382
Replication of Vendor master from SRM to backend.
BR,
Disha.

POR not transfering from SRM to ERP

Hi Experts,
We are working with extended classic scenario on SRM 7.0 & ERP EHP4.
We are creating POR manually in SRM and also recieving POR from SUS system.
When we accept the POR it is not updating the ERP.
We have enabled the PI scenario for transfering POR from SRM to ERP by using the Proxy and IDOC(ORDRSP) but the XML is not generated when the POR is accepted.
Can any one help me how to transfer the POR created in SRM to ERP.
Is there any way we can generate XML message of POR with status Accepted.
Regards,
B.N.Karthikeyan

Hi,
I have tried this define event option.
Still XML not generated for POR.
Regards,
B.N.Karthikeyan

Product Contract and supplier data transfer from SRM to SAP XI

Dear MDM Guru's
I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
Please help.
Regards
Jacob

HI Jacob,
I believe below documents will give you the information which you are looking.
[SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
[SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
[SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
Please revert if you still get any question, after going though these documents..
- Shiv

Data Extraction from SRM

Hi all,
can anybody give me inputs on how to extract data from SRM. What are the standard Extractors.
Thanks,
Kiran.

Hi ,
U should be able to easily find the details of standard SRM extractors in help.sap.com
Also this note would be helpful
[Note 614940 - DataSources for the Enterprise Buyer and SRM Server|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=614940]
Regards,
Rathy

Item text and item note are not transfering from SRM to ECC on to PR

Hello Expers!!!
Due to some requirement we added some logic in BBP_CREATE_BE_RQ_NEW to print the used ID of the shopping cart creator on PR under item text requisitioner tab. but after moving these changes to production the item text(Vendor text) and item note(internal note) which are maintained in the shopping cart are not printing on the Purchase requisition under item text and item note tabs. these two texts were printing correctly before moving our changes.
please suggest me how this item note and item text will print on PR. Is it a standard functionlity in SRM 5.0?
is this because of move over changes?
suggest me to resolve the issue....
thanks in advance...
Regards,
CD Reddy

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

VM04: data transfering from specification database to table MGEF

Hello everyone,
I've customised for running VM04 in IMG.
I've assigned the Hazardous Material number 11 to the Material 1666.
I've assigned the Material 1666 to the Agent P182.
But after running VM04, the data of Hazardous Material 11 which is in table MGEF (T-code: VM03) is still not covered by the data of P182 from specification database.
Could anybody look for the reason for me, please?
Thanks!

Hello
The MGEF approach as a very old one. Form legla perspective it is not useful any more.
Documentation can be found here (e.g)
http://help.sap.com/saphelp_45b/helpdata/en/35/71880186c2223ae10000009b38f984/content.htm
I assume you have performed all necessary customizing activities? Do you receive error messages ??
Furthermore may be take a look here:
Need Warehouse Management Tables in SAP
http://help.sap.com/printdocu/core/print46c/en/data/pdf/LEWM/MMWM.pdf
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0e8c107-0435-2e10-a5bc-e295ed04049b?quicklink=index&overridelayout=true
It is recommended from legal perspective to use eWM and not WM any more or at least the new WM approach as described in
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0e8c107-0435-2e10-a5bc-e295ed04049b?quicklink=index&overridelayout=true
With best regards
C.B.
Edited by: Christoph Bergemann on May 7, 2011 1:42 PM

The Po condition transfered from SRM to ECC

Dear ,My Experts :
   I work in SRM7.0 .Extended Classic Scenario .
   I create PO with PO condirtion in SRM system .The PO will be transfered to ECC system . But the condition is not transfered .
   So ,i want to know why ,and how to do ?
   Best Regards!
   Alex!

Hello,
As the price determination has already done by IPC for the leading SRM PO, in standard when a PO is transfered to the backend, only the netprice is passed to backend and no further price calculation will be done at the backend. The backend PO takes what ever price SRM sends and creates the PO at the backend with a base condition type PBXX. To intimate the backend not to perform any further price calculations, SRM transfers PO_PRICE = 2. So that backend reads this value and takes only the SRM PO price and no pricing conditions are passed to the backend PO.
This is the standard design of extended classic scenario.
There are not consulting notes for transfering pricing conditions to the backend in ECS. If you want to use the backend conditions you have to implement the BADI BBP_ECS_PO_OUT_BADI to override the value of PO_PRICE = 2.
I hope this helps.
Kind regards,
Ricardo

Cannot get Palm Desktop in Mac to see data transferred from a PC

My wife has been using Palm PDAs for about 10 years, most recently a TX. Both this and her PC laptop have been stolen. She backs up to my FTP site from her laptop her MollyB directory (MollyB is her Palm user name) with everything below it. She urgently needs to get at her Palm data. I have FTP downloaded her data into my MacBook Pro (running OS-X 10.5.8) and have downloaded from the Palm website Palm Desktop 4.2.1 for Mac.
However, I cannot get the program to see the data.
How do I solve this?

Attachment is not transfering from SRM to SAP R/3 Backend

Hi DMS Experts,
I have an issue with document attachment which is not coming to SAP R/3 Backend.
Process.
1.Create shopping Cart in SRM system with attachment,
2. Purchase requistion is created in backend replica of SRM shopping cart. but the attachment is not exists only document number exists in the DMS (CV03N - No attachment)
can any one face this sort for issue before, kindly let me know what could be the casue,
Cheers...Gopinath

Hi Gopinath,
could you please check if there is really no original file attached to the document info record. Therefore please execute report DMS_KPRO_READ in transaction SE38.
Further please see also the information on page http://wiki.sdn.sap.com/wiki/display/PLM/Error26296in+CV01N.
Best regards,
Christoph

Buzzing noise during wireless data transfers from new (model 1408) AirPort Extreme.

I exchanged a 3 week old 4th generation AEBS to get this new allegedly more powerful 5th generation AEBS. Both base stations were positioned in identical locations adjacent to identical harware. Yet only the new model emits the buzzing sounds. Any explanations?

Additional information gathered since original post...
At this point I have purchased and have had the opportunity to use 3 new 5th generation AirPort Extreme Base stations (model 1408). Two came from my local Apple retail store and the third was shipped from the on line store. All three emitted exactly the same buzzing/hissing noise during network traffic. I sit about 2 feet from the AEBS in a quiet home office and these sounds are very annoying.
Two Apple tech support reps claimed they never heard of this problem. I directed them to Apple Support Community postings dating back to 2009 that exactly described this issue (even with the 4th generation AEBS). Although these posts were detailed, as far as I could tell they did not state that Apple provided an explanation. My calls to Tech support have been kicked up to systems engineers. I am supposed to get some sort of reply after July 4.
I think others should make Apple aware of this issue (again) if their AEBS routers make the same noises.
Thanks

Debugging Middleware/BDOC when the material data transfered from R3 to CRM

Hi,
I am updating the status of Product in CRM using BADI - PRODUCT_CUSTOMER2 (R3_TO_CRM_MATERIAL). This happend when the status is updated in ECC (MM02).
Now the problem is, I want to debug this BADI, when the material is updated in MM02.
Could you please help me, how can I debug this BADI.
Thanks,
Sandeep

Hello Sandeep,
Please check below general steps to debug the delta download of ECC material.
in R/3
Set a break point in the function module CRS_MATERIAL_COLLECT_DATA (BTE Implementation)
Create/Change the material in R/3 by using transaction MM01 or MM02 and press save button.
Now you can debug the function module CRS_MATERIAL_COLLECT_DATA
in CRM (inbound queue)
Deregister the inbound queue R3AD_MATRIA* in transaction SMQR
Go to the transaction SMQ2 select the inbound queue and debug the queue
Set a break point on the mapping function module: COM_MAP_BAPIMTCS_TO_PROD_MAT
for validation debugging Set a break point on the validation function module: COM_PRODUCT_MAT_VALIDATE
I am sorry that I do not know where BADI PRODUCT_CUSTOMER2 is called.
Hope the baove information could be helpful.
Best regards,
Maggie

Data transfers from SRM to R/3

Similar Messages

Maybe you are looking for