Data upload problem in delta update from 1st ODS to 2nd ODS

Dear Friends,
I am loading data from one ODS to another. The update mode was full upload. Sometime back an error occurred in activation of the first ODS. The error was: Full updates already available in ODS ,Cannot update init./delta. So currently daily records are pulled but not added i.e. transferred recs = 4000 but added recs = 0.
When I looked for a solution in SDN I found that using program RSSM_SET_REPAIR_FULL_FLAG for 2nd ODS will reset all full uploads to Repair Full Request which I have already done for 2nd ODS. Then initialize once and pull delta.
But problem is that I cannot set update mode to delta as I am pulling some 80,000 records in 2nd ODS from 1st ODS with around 14 lacs records daily based on some data-selection filters in infopkg. But do not see any parameters for data-selction in delta mode.
Please suggest.
Regards,
Amit Srivastava

Dear Sirs,
Due to this error in activation in 2nd ODS daily data upload is failing in 1st ODS.
To correct this I converted all full upload requests in 2nd ODS to Repair full requests.
But now when I scheduled the infopkg today with full upload again data was transferred but not added.
I know I cannot have init./ delta so what possibly can now be done in this scenario. Please help.
Regards,
Amit Srivastava

Similar Messages

  • Delta Mechanism CRM to BW - Problem with delta update

    Hi BW Gurus
    Delta update from CRM - BW 3.X is not pulling all the newly added records and records which were saved with error, warning in CRM to BW
    Can any one suggest me an approch to fix this issue
    please let me know if you need more info
    Thanks in Advance,
    Shilpi

    Hi Shilpi
    Did you manage to find a solution for this problem? If so, could you please let me know how you solved it.
    I am also having a problem with datasource 0CRM_SALES_ACT_1 - when I do a full load, it works, but when I try to do a Delta load, it does not bring across any data. In transaction RSA7 on the CRM source system, the entry looks like this:
    Green: Delta is recorded     0CRM_SALES_ACT_1     BWQCLNT320     0
    Regards
    Rayan

  • Problem with delta update on customised export data source.

    Hi all BW gurus,
    I have created several customised export data sources in the R/3 system. And I have made use of the utility program <Z_CHANGE_DELTA_PROCESS> to update the ROOSOURCE table.
    While this can result in being able to do initial update (instead of full update), the subsuquent delta update is not working.
    In RSA7, the datasource is with green light and in RSA3, the extractor can extractor data out of it.
    Does anybody have some idea on this?
    I heard that there is a way to change the Business Transaction Event (BTE), but I don't quite understand how this is performed. And wonder if this is the only way out. To me, the triggering point would be the same, meaning the InfoPackage would be executed, then call the extractors in R/3 to extract the delta update in order to load into the InfoCube.
    And how do others do for executing delta update of the customised data source?
    Thanks a lot!!
    The utility program of <Z_CHANGE_DELTA_PROCESS>:
    =================================================
    report z_change_delta_process .
    *P_DATAS DataSource
    *P_DELTAP Delta Process for DataSource
    parameters:
      p_datas type roosource-oltpsource,
      p_deltap type roosource-delta.
    tables:
      roosource.
    data:
      ls_roosource type roosource.
      if p_datas(2) ne 'Z_'.
       message 'The DataSource needs to begin with ''Z_''.'  type 'E'.
      endif.
    select single * from roosource into ls_roosource
           where oltpsource = p_datas
           and objvers = 'A'.
    if sy-subrc eq 0.
       ls_roosource-delta = p_deltap.
       update roosource from ls_roosource.
    message 'The DataSource has been updated successfully.' type 'I'.
    else.
       message 'The DataSource entered is not valid, try again.' type 'E'.
    endif.

    Doesn't anyone have any idea on this topic?
    Appreciate for all the help. Thanks.

  • Viewing the delta updates from a months of data

    Hi experts,
                i am loading the data as delta update  everyday and once i fail to run the delta update.at the end of month client asks me to show the history of deltas for a month?where i can show the delta updates of a month?is there any tables for showing the delta updates ?

    Hi,
    I think it willbe in table ROOSPRMSC, here u can find out the time stamp of delta uplaods.
    Regards-
    Siddhu

  • Problem in delta changes from ECC to CRM for Customers created in CRM systm

    Dear all,
    I am replicating customers between CRM and ECC and vice versa. The Delta changes are replicating from CRM to ECC system, but not happening from ECC to CRM system.
    I have created some customers in CRM system and changed some address data, those changes are perfectly updating in back end ECC system.
    But when I make some changes for the same customer from ECC system, those changes are not updating back in the CRM system.
    I could not get the problem where exactly is coming. I request your expertise to help me in resolving this issue. I believe all middleware and pide settings are correct.
    Your suggestions are highly appreciated.
    Best regards
    Raghu ram

    Hi Shanthala,
    Thank you very much for your prompt response, I have checked Customer_main adapter object in R3AC1, no filter has been found there.
    and in R3 table TBE31, I could not find entry for CRS_CUSTOMER_COLLECT_DATA for APPLK = BC-MID.
    As well in CRMRFCPAR table I could see X assigned to field named with 'In Queue Flag', but I could not find DISCARDDAT for CRM (User) settings.
    Kinldy help me to resolve the issue.
    Your suggestions will be highly appreciated.
    Best regards
    Raghu ram

  • Data upload problem

    Hi,all:
       Now I face the problem as follow:
       1.The delta upload can not run automatic finished.I can find some course in <b>SM58</b>,How to solve this problem? Can you give me some helps?
       2.When I delta upload,system message like this:
    <i>Processing in Warehouse timed out; processing steps mising
    Diagnosis
    Processing the request in the BW system is taking a long time and the processing step Second step in the update has still not been executed.
    System response
    <DS:DE.RSCALLER>Caller  is still missing.
    Procedure
    Check in the process overview in the BW system whether processes are running in the BW system under the background user.
    If this is not the case, check the short dump overview in the BW system.</i>
        What is wrong with the data upload and how to solve it? Can you give me some advice?
    Regards&Thanks!
    zagory

    Hi Zagory,
    I think at the time of this particular job starting there are other jobs running with Background User Owner or there might be other background jobs running with Priority  A . SO  try to reschedule the JOb at some later point in time where system is less busy ......or one more option is to try to increase the System Dialog run Time in RZ10 transaction ...Ask ur basis team they will do for you ...
    But try first option first......
    Assign points if it helps.....
    Regards,
    Vijay.

  • T61P died, 1 long beep - 2 short beeps problem - Do the updates from Lenovo KILL our laptop?

    Hi all
    I bought T61P from 2 years ago, everything is ok until yesterday, I turn on my laptop and nothing display on the screen, and with this :  1 long beep - 2 short beeps....
    I make some search, and found a lot of people have the same problem, and almost happend from September - 2009 to now.
    I asked my self why this problem does not happend in the 1st year of using T61P...and this only happend from September - 2009 to now? DO THE UPDATES FROM LENOVO KILL OUR LAPTOP?
    My laptop is out of warranty, and I hate to replace another mainboard.... If I must do it, I will throw my laptop to the Trash, and never buy another Lenovo laptops.

    so far it looks like a strict hardware problem, not related to updates. however, some manufacturers try to "cheat" with bios updates - they make fan to run at higher speed lowering the mainboard temp. This does not solve the problem per se, it just makes laptop survive beyond warranty expiration date, so you, dear customer, will have to foot the bill.

  • What happend to past delta data if we delete Delta INIT from Cube? safe ?

    Hi Friends,
    we have a cube where delta data is loaded daily from ODS.
    So, cube have many delta requests and data is compressed.
    Now have some problem and need to delete Delta INIT from this Cube and run fresh delta INIT again into Cube from ODS. Is that safe ?
    If we do this...is there is any problem with past delta data availble in the Cube?
    Please confirm..
    Thanks
    Tony

    Hi,
    I told you to check this before deleting the init as it very tough to manage it after that.
    Now those delta request are missed and I dont think can be retrieved without doing a full repair with proper selection.
    If you do a new init then there should be no request without a check for data mart status??
    So you found it before deleting the init??Then you should not have deleted the init as I told earlier.
    The only option is too reload the whole histroy again if you are not able to load it through selections in infopackage.
    First do a selective deletion from the cube for the same selections and then schedule the full load for those selections from DSO.make sure these selections cover the whole scenario.
    You cannot do anything else now to correct it.
    If you data is not huge in cube then delete the whole data and reload it.
    Schedule multiple loads from the DSO at the same time through different infopackages.
    this will save time as weill will do the loads in quick time.
    Thanks
    Ajeet

  • Historical Data with it's delta loading from PSA to ODS in 3.x model

    Hello ,
    I want to load the one year back historical data with it's delta's to ODS object in BW 3.x model .
    So can you please give steps to load historical data from PSA table into ODS object(not from the source system).
    Thnaks alot
    Regards
    BI Beginner

    Hi
    Run the full load IP from PSA to ODS with selections on 0CALDAY(give one year selections)
    make this full load as repair full request.In display mode of IP, in menu bar click on scheduler --> select repair full --->check the option and click ok.
    now execute the IP.
    If you run like this, your init which has between your PSA and ODS will no get disturb.
    Regards,
    Venkatesh.

  • Should I be concerned with losing existing data (projects or events) when updating from FCPX to FCPX 10.1?)

    I purchased a Macbook Pro loaded with FCPX from a private party. I now want to update from FCPX to FCPX 10.1 should I be concered about losing my exhisting projects and events? The previous version of FCPX is registered to another person and wondered if this could potentially overwrite anything. I backed everything up to another drive but, just wondered if anyone has done this sucessfully?

    The project files are put where FCP X wants to put them. If you render anything, it puts the rendering where it wants to put it.
    FCP X has three opportunities to lose something - it can't find your project, it can't find the event, the event can't find the media. We see it on this forum all the time and right now 10.1 is managing all that and screwing it up for some people. We see FCP X updating events and projects...
    With Motion 5, I put my project file where I want - in a folder for that project. In that same folder, I have all my media. It's not necessary to have a feature where it moves my files for me to another drive, etc. I simply drag that folder anywhere I want and all the links are in tact because the links are relative.
    With FCP X, even if I don't copy the media to the events folder and leave it where I want, it still creates a folder with its own hierarchy - Backups, Old Versions, Original Media, Render Files, Transcoded Media...
    FCP X's method opens people up to more problems, obviously. You don't see people on the Motion forum talking about how Motion moved media or put it in the trash etc. The only thing that can happen is the small XML project file can't find the media and so you simply relink and you can use Spotlight for that.
    Seems like there are more headaches with FCP X's method.

  • How do I make sure I am up to date with all the necessary updates from MAC?

    just wait for the automatic sofeware update? is there a site where they warn of virus maleware for MAC? I am reading on the BBC technology website and elswhere of a widows virus outbreak. but where do i go for MAC?
    Thanks

    nefsi wrote:
    dear Lyssa: does this apply for all sorts of essential updates from Apple/ adobe etc ? i.e. every time I i get the software pop-up telling me a new update is available I have to let it download the file but I have to look in the utilities for installer and activate it manually ? thanks
    No: Firmware Updates are rather unusual and operate differently to the normal software updates. They require a special procedure which is documented with the update. But even the normal software updates require the Installer to run: however Software Update will take care of that for you if you let it. You certainly won't need to go looking for the normal Installer.
    In your specific case, the page for MacBook Pro EFI Firmware Update 1.5.1 tells you:
    To complete the firmware update process, please follow the instructions in the updater application (/Applications/Utilities/MacBook Pro EFI Firmware Update.app). The updater will launch automatically when the Installer closes.

  • Problem with os update from 4.3 to 4.5 on Curve 8330 Verizon

    Performed os update from 4.3 to 4.5 through "check for Updates" on blackberry's site.  checked box to have information backed up while updating and then restored after.  during update there was an error and the restore did not take, but phone was wiped.  when I reinstalled update it did not give me the option to restore.  I have .cod files saved on computer from the update but I need to restore my contacts, calendar etc.  is there any way to do this?

    Hello,
    Yup...the backup process would have created an IPD file. Search your hard drive for a file with extension of IPD (*.IPD). Inspect the results...the file created at the time you were doing this is the file you need to use a restore source.
    If you are using the RIM software through 5.0.1, see this KB.
    If you are using desktop software 6.0, then see this KB.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I'm having problems getting my updates from the App Store. Nothing is showing up.

    I can't get my updates from the App Store . The screen is completely blank . Anyone have a solution ?

    The update server is down; try this temporary workaround
    App Store>Purchased>Select "All"
    Note: Look out for apps that have the word "Update"
    http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

  • Would like to set events to repeat monthly on my calendar - but not by date.  Would like to repeat on 1st Monday or 2nd Wednesday, etc.  Possible?

    Would like to repeat events monthly on calendar,  but not by date.  Would like to repeat on 1st Monday of each month, 2nd Wednesday of each month, etc.  Possible?

    Use iCal on your Mac to configure custom repeats and then sync to your iPod.  The Mac iCal allows almost infinite choices.

  • Problem in Delta update

    Hai friends,
       I have an Infocube that gets data from 2LIS_13_VDITM datasource. For some reason the data pull had not been successful on 11th of october. And we found it only on 1st of November. So we deleted all the requests from the IC since 10th after setting the QM status in RSMO to RED. Now when I repulled the data on 4th November, it has pulled only November's data and not data from 11th to 31st October. The data also goes to 2 other infoprovider. What do i do get entire data. Kindly help as soon as possible. Its urgent.
    Regards,
    Neha Solanki

    Hi ,
    as akash said either you can fill the set up tables selectively
    or follow the step by step procedure:
    (<i>benefit setup tables will contain the all historical data till do date(we are not missing any data</i>)
    1.deactivate the aggregates(as they donot contain the data after 10th oct,we need to load them freshly)
    2.delete the data in cube
    3.delete the init flag
    a.infopackage - Menu -> Initialization parameters -> delete the init request
      r/3 side
    1.delte the setup tables
    2.re fill the setup tables it will load all the historical data till to date
    bw side
    run the initialization with data
    use delta Ip to run delta load
    fill the aggregates
    Cheers,
    Swapna.G

Maybe you are looking for

  • Printer (not computer printer) for 10,000 piece 8 page brochure??

    I have created this brochure in Pages. It is 8 pages 8X10 and I need a commercial printer. Having a little problem with my local printer because he has never worked with Pages and I do not see that as a problem for him in that I am sending him a .pdf

  • New at building editing machine need help

    So I've been reading the forum and through some research I've seen a good option for a mobo is X58 ASUS P6X58D-E LGA - but I've been reading the plethora of problems and I know me and I am definitely not a tech savvy guy when it comes to making these

  • Synching multiple ipods to 2 computers

    my children have an i-tunes account that they share and their ipods are all linked to that account and synched on their computer...my husband and I recently bought i-phones...can we all be linked to the same i-tunes account/music library and share al

  • How to notify admin/some user if in list/library workflow fails?

    How to send notification to admin if workflow fails to start or some error occurs in workflow? i tried creating workflow on workflow history list but it is not running automatically as items are created with system account. Is there any other way to

  • I can't get Sims 2 to install on my MacBook Air.

    When I put the disk in a load of weird files come up and none of them actually let you play the game? Any help?