Data1.cab is not signed by RIM, quitting installer

Hi guys,
can anyone give me an advice by my problem, trying to install the newest version of BlackBerry Software?
I get following errormessage in the MSI logfile:
Data1.cab is not signed by RIM, quitting installer
Errorcode: 1602
I already imported the certificates of data1.cab and the msi file with following steps:
Properties -> Digital Signatures -> choosing: Research in Motion -> Details -> View Certificate -> Install Certificate -> Next -> Pointed: Automatically select the certificate store based on the type of certificate -> Next -> Finish.
The user that install the software has local adminrights.
Thanks in advance!

*push*
Have anyone an idea?
Its very urgend :/

Similar Messages

Data1.cab file not extracted when installing Acrobat X on windows under VMWare Fusion 4.0

When extracting the files to the installation folder, the Data1.cab file is created but it is o kb value. Then when running the setup file, there is an error generated because the setup cannot see a valid data1.cab file

Manish_1988,
Thanks for the suggestion but after trying all of the suggestions, I still
did not have any success.
I ended up extracting the install files while I was in Oracle Virtual Box
then used the install files when I was in VMWare Fusion. A bit convoluted
but it worked.
Again, thanks anyway.
Greg Lewins

Unable to update Acrobat XI: Error 1311. Source file not found: ....\Data1.cab

Hello,
My Acrobat XI was obtained as a digital download, installed without a hitch and runs fine. When I recently received notification of an update, I attempted to install it but couldn't because of the above mentioned error.
I searched the specified (x86) directory and Data1.cab is not there. I ran the original downloaded executable file and it created a temporary folder on my desktop with the install files but Data1.cab is not in that directory either. What am I doing wrong? Thanks in advance.
Art

Thanks Anoop,
I’m still getting the same error message.
Regards,
Art Acuña
<mailto:[email protected]> [email protected]
Dominus vobiscum

Data1.cab not found when installing msi bluetooth

Hi
I just bought an MSI bluetooth pc2pc and when I am trying to install its software on my Windows XP, it keeps on saying to me that an error occured. The error number is 1311. It says "source file not found: E:/Blue Tooth/data1.cab. Verify that the file exists and you can access it."
In this window only a retry and a cancel button appears and when I press retry, this window comes again asking for this .cab file. I cannot even search for this file somewhere else on my PC. If I press cancel it rollbacks everything leaving me with no Bluetooth software and obviously no bluetooth connection.
I also tried to change its software CD and I also changed the bluetooth device to no avvail.
IS THIS A PROBLEM ON MY WINDOWS OR A PROBLEM FROM THE INSTALLATION CD.
Please Help me cause if there is a problem with the bluetooth package I have to return it back

Just curious can you extract the file with winrar and then install. I haven't run across your particular error but that has resolved other issues for me.
Regards,
Tim

ERROR 1311: Source File Not Found. Data1.cab

Hi
Trying to install upgrade Acrobat Pro XI on Server 2003. We already have Acrobat Pro 9 installed.
Install starts and is halted midway by message "Error 1311: Source File not found. Data1.cab. Verify that the file exists and that you can access it."
Heeeelp me please. Thanks

See the following help document:
Errors 1311, 1335, 2350 :
http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html

After a recent update my acrobat 10 is not working, It says it is missing DATA1.CAB file, help

Hello, the acrobat 10 fille recently updated & failed & now it does not work. I says it can't fine a DATA1.CAB file, Help.

It took me a while to find it but it worked when i finally found the right one thanks!
<user name> library- application support- television fanatic- plugins

JRE - Error 1330 (Invalid digital signature in data1.cab)installing1.6.0_13

I cannot install jre6 update 13. All attempts from using full offline download result in the following error message:
"Error 1330. A file that is required cannot be installed because the cabinet file C:........\Java\jre1.6.0_13\Data.cab has an invalid digital signature. This may indicate the file is corrupt."
It looks like there is a problem with the 1.6.0_13 consumer JRE offline installer once it was digitally signed. Is it possible the digital signature of the Data1.cab file was corrupted during extraction. I am wondering if Sun needs to rebundle this offline package again.
I have disabled virus checking, and whatever else I could think of!
System is Windows XP SP3.
Has anyone else experienced this problem, or have any suggestions?
Thanks,
Paul

Afternoon,
I have had this error on a hand full of WXP SP3 workstations running 1.6 update 16. I am not a smart person, but I do know how to search. I found a fix a tried on a similiar error.
On one of my problem children I did the following.
As Admin verify rpc service is started.
from a CMD prompt
regsvr32 softpub.dll
regsvr32 wintrust.dll
regsvr32 initpki.dll
regsvr32 dssenh.dll
regsvr32 rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 slbcsp.dll
regsvr32 cryptdlg.dll
I believe the initpki.dll took a few to respond. After that I restarted and tried the install on the problem child again. Success. Since then I have been going back to my other problem children. I try the install without the fix and have not had a issue, YET, installing update 16. It's PFM.

How may I obtain the file "data1.cab"

Hi, Sirs:
我的电脑上安装了从贵公司官网上在线购买的Adobe Acrobat XI Pro (11.0.05). 不知为什么升版时出错，出错信息“没有找到源文件Data1.cab”。请问如何解决。
WZY

Hi 智樱王59870609,
Please see this document, which covers the error you're receiving: Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows.
In your case, it sounds like antivirus software may be the likely culprit. Please sign in as an administrator, and disable any antivirus and try installing again.
Best,
Sara

Installation of Blackberry Desktop Software fails: Data1.cab corrupted

Hi,
I got some trouble to setup BlackBerry Desktop on my PC. I've tried to download and setup the software three times, but there is always the same message: Data1.cab seems to be corrupted. I tried to unzip the file manually, without success...
Does someone have an idea ?...
Thank you in advance.

SDR wrote:
Xandrex, I am having the same problem (along with a few others). I hate to sound like a novice, but how do I decompress into a folder other than temp? Whether installing from the website, or saving to my desktop and then installing, it unzips without giving me a choice of where to put the files.
Hello,
I don't have the install at home so my answer will be approximate. when you get the .exe file, it is in fact a zip file with a small launcher that knows it has to unzip the stuff in your temp file.
What you need is a decompression tool to decompress without that launcher. You can install 7Zip that is quite good for those things.
You can also try WinZIP or winRAR or winACE but those are not free-of-charge.
http://www.7-zip.org/
Once you have installed this tool, just open 7Zip and browse to the .exe file. click on it, there should be a button "Extract". Choose a folder (somewhere on your Desktop for example) and wait for the decompression to finish.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

CS2-installing error "data1.cab" file corrupt

I have recently reformatted my C drive and reinstalling programs.
I tried to reinstall my CS2 Photoshop, but received error message that the "data1.cab" file was corrupt or missing. Could not install program.
I don't know how to fix. Could someone please help?
Thanks,
mmspry

from a disc? try to copy the photoshop folder from the disc to the desktop, then run setup from there. however, you might have a bad drive or a bad disc. if the setup from the desktop fails, try installing on another machine. if it still fails, the disc probably has a problem. if that works, maybe your drive needs replacing.

Data1.cab missing when installing elements 12 from download

I though that i hadcessfully donloaded both the *.Z7 ffile and the *.exe file. It took quite some tim unpacking all the files but one thing i noticed that the numbers of cabinets don't make sense. It runs from 1 to 15 but data4.cab is not there. now that data4.cab i just the one the installer seems to miss. i didn't get any error message. perhapsd i will try unpacking them again/.

Hi Pat,
After that initial error, I moved the two downloaded files to a local disk (they were on an external disk before) then I ran the executable, now all files were correctly unpacked and installed. Just for information: I was not unpacking those files manually, the installer unpacks everything to a seperate folder only then can the installation beggin. It was during installation that the installer asked for DATA4.cab.
Regards,
Daniel Vanhoof

Corrupt Data1.cab in Oracle Express 10g Universal for Windows

Hello Oracle Folks,
I downloaded several times Oracle Express 10g Universal for Windows (OracleXEUniv.exe) and tried to install it and I get every time the same error message: "Error 1335. The required file "Data1.cab" is corrupt and cannot be used ...". When I download the Western European Edition (OracleXE.exe) the installation works! I downloaded the file on different local disks to exclude the risk that my disk is damaged.
Can you please check if this download is sane!
Thanks and best regards Thomas Mayr

kalyat wrote:
Amazing reply Hans.
I have seen some arrogent smart mouth answers in my time. But this really takes the cake. Also judging from the icon you are some kind of employee of oracle. Wow! Now that shows respect for your users.
Sorry to disappoint you - I am not an employee of Oracle. Much of your rant is irrelevant.
I am simply a person who has volunteered enough time to provide over 8,000 repsonses in these forums and many more in other forums.
Many, many, many of the questions are pure repetition due to the extreme laziness, incompetence or inability to do basic thinking by the questioners. There are also a lot of questions by 'newbies' who have obviously made an attempt to research the problem.
My approach to answering questions is simple and two-fold:
- make the person angry enough, or aware ennough, that they will think a bit when asking the next question;
- if they ask a question intelligently (http://www.catb.org/~esr/faqs/smart-questions.html) I usually am convinced to help.
(And yes, I do take longer breaks when I find myself being frustrated enough to provide answers like the above.)
The stupid installation program for your stupid database was supposed to check the version of the Operating System. Anyway how does the operating system version matter if a cab file is corrupted? which was incidently packed in that stupid download link which you have happily given to all customers all this time. I was hoping to find that since you guys are too lazy to make the installation file properly you might have atleast bothered to put up a download link for that stupid Data1.cab. But nooo... The 'stupid installation program' is indeed that - a stupid installation program. It does a certain amount of checking, but definitely not enough. In that I do agree with you. It was also released too early - basrely understands how to spell Vista.
Also, there is an assumption by Oracle that the person downloading reads the documentation, especially the installation guide, that is available at the same location as the download. It is amazing and extremely disappointing to note how many people will not even attempt to look at the link.
The real sad part for me is that I frequently download software (and did again in this case) to verify that the user has a legitimate complaint. The 'data1.cab' that I received was not corrupt. Therefore I conclude the original poster made some huge assumption that is likely invalid. Now, I did install into an XP machine, and that could make a difference.
As for the 'you guys' statement - perhaps you should take that up with Oracle or an Oracle employee. Directing at me is an unsubstantiated assumption on your part. <g>
>
I wasted some time thinking I would check out the db for development, got the same error and after seeing your mealy mouthed response to that poor guy who was asking a valid question, I think I won't bother anymore. You see, there is this amazing thing called Linux and MySQL..
Yup. You could easily go there. Shows yet another assumption. (In fact, my company is centered around Linux and Oracle. And I have made a conscious decision, based on 3 decades of experience, to toss MySQL and stick with Oracle. And now that Sun, which owns MySQL, seems to be on the auction block, the future of MySQL is definitely up in the air.)
However, given how many assumptions you make and how valid they are, you may find it easier to stick with MySQL. Oracle Express edition potentially could save huge buckets of time and effort in the long run, but it does require reading, research and other skills to get up to speed.
Now, as to your problem
1) This is not the forum to discuss issues with installation. (If the problem is traced to the download source, then this is the right spot.)
2) There is a dedicated forum for Oracle Database 10g Release 2 Express Edition (Oracle Database Express Edition (XE)
3) You are absolutely correct that the installer should be smart enough to check the OS. It does not.
4) Since it does not, and since there are differences, knowing which version AND edition of Windows (or which Linux distro and release) is critical to troubleshooting.
Edited by: Hans Forbrich on Mar 21, 2009 4:32 PM

Data1.cab error

I cannot install Acrobat Pro ver 6.0 as I keep getting a data1.cab error. It says the cab is corrupt. I have tried to extract the files and indeed there is a corrupt file in the cab. Can I download a cab file for this version or is there something else going on???
Rob

It should install on XP. Apparently you do have a corrupt file. As long as you registered AA6 with Adobe, they may be able to help you. They will not discuss the issue if you have not registered or prove you purchased the product.

Error 1335.The cabinet file 'Data1.cab' corrupt

Acrobat Professional Design Failed. Could be network error, or problem with the package. Acrobat Professional Install Failed.
I don't know what to do.
I have uninstalled and re-installed the entire package and it is not working.
Windows 7, 62 bit

HI WatershedCenter,
Please try the following link and advise if you were able to install the products or not.
Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows
Cheers,
Kartikay Sharma

Data1.cab file is present but empty after download for Acrobat Pro XI

I am trying to upgrade to Acrobat Pro XI and have downloaded the files. The extraction process took quote a few attempts before it worked on my PC and I'm now doing the install. It get to a point where 'Error 1311 Source file not found' appears and asks me to check on the data1.cab file and retry. The file is present but is empty (0kb) so when I hit 'retry' the same message just appears again.I am downloading from Adobe direct, not from a disc and am downloading onto a PC.

there's only one self-extracting file you need to download. make sure your dl is complete.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Data1.cab is not signed by RIM, quitting installer

Similar Messages

Maybe you are looking for