DataAction class changed from 10g Preview version to Production

I have been using the production version of JDeveloper to work through the "Creating a JSP Application using ADF Business Components and ADF DataBinding" tutorial that was written for the 10g Preview (http://otn.oracle.com/products/jdev/collateral/tutorials/9050/bizcomp_jsp_tut.html).
In one section it instructs you to override the findForward() method of a DataAction. Unfortunately, there is no longer an overloaded version of findForward() in the DataAction class that returns an ActionForward object, only one that returns void. Overloading the method is not a problem per se, but it cannot return super.findForward() as is specified.
There is also a problem with importing oracle.adf.controller.struts.actions.PageLifecycle; the class does not seem to be part of that package.
Any help or guidance is greatly appreciated. Thanks!

Ryan,
Yes, some of the classes have changed between the preview and the production release. The extent of the changes are describe in the release note accessible from the help menu.
As for the findForward method, the value of the action forward is now set to the context object. Look at the javadoc for StrutsPageLifecycle.findForward
http://download.oracle.com/otn_hosted_doc/jdeveloper/905/adf_javadocs/oracle/adf/controller/struts/actions/StrutsPageLifecycle.html#findForward(oracle.adf.controller.lifecycle.LifecycleContext)

Similar Messages

  • Error when uploading "The bundle identifier cannot be changed from the previous version"

    I have an app on the App Store created with DPS, Single Edition a long time ago, shortly after DPS SE became available. Now I've updated the app, built a new version with DPS App Builder, created a new version of the app in iTunes Connect, and tried to upload the Distribution zip file using application loader. I'm getting 2 error messages:
    "This bundle is invalid. The bundle identifier cannot be changed from the previous version. If you want to change your bundle identifier, you will need to create a new application in iTunes Connect..."
    and
    "This app contains an embedded provisioning profile that is not associated with your account. Please use a provisioning profile associated with Team ID ..."
    I've done this several times before with other apps, and never got these errors before. Any ideas of what is going on?
    I'm able to view the developer ipa file just fine on my iPad.

    Nevermind. I left for lunch, returned, took a fresh look at it, and discovered that it was a stupid human error on my part.

  • Why do a change from one OSX version to another OSX version?

    It seems to me that Mavericks OSX is NOT an upgrade.  It seems like it is a side-grade since I would still be using OSX, just a side to side change….  The first response noted that some people  have difficulty with iPhoto after doing a side to side change to Maverick.  I use iPhoto all the time, don't want any problems with that… and another said that the Time Machine backup no longer worked after the change from OSX (Mountain Lion_ to OSX Mavericks)…  That is my backup program and I certainly don't want any problems with that.  So my ? remains…. why do a side to side change from one OSX to another OSX version???  The answers received are not answering that ?.
    Your replys and comments are appreciated.

    The reasons for upgrading are:
    - Security (there are a myriad of behind-the-scenes security improvements, and some foreground improvements in programs and system services)
    - Service compatibility (ie, syncing services like iCloud)
    - Application Compatibility (as programs develop, they will drop support for prior versions of OS X).
    - Latest and greatest features, if you find them useful.
    - Hardware compatibility, with peripheral devices that may no longer support an older version of OS X.
    OS X is not just "OS X" with a bunch of peripheral changes to it. There are a number of under the hood enhancements and changes that have fundamentally altered the OS from one version to the next over the years, be it from the kernel all the way through how accounts are handled, to how background services are run and otherwise managed. Granted from one version to the next is sometimes not as significant of an upgrade, but for the most part there are significant changes. In OS X Mavericks, Apple has added major changes to memory and process management, which offer potential to greatly increase battery life, and/or reduce power consumption and wasted CPU cycles.
    Of course, with any upgrade you will get the potential for drawbacks, such as initial break-in hiccups.

  • ADF Specific Default Changes from 10g to 11.1.2.0.0

    Does anyone have a definitive list of changes to the default settings that are new in 11.1.2.0.0?
    I am migrating an application from 10g to 11 and what works fine in 10 not so much in 11.
    I have already learned that the default iterator change event is now PPR.
    Now for my project CreateInsert no longer works. Is that because of the default change in the <af:table>  editing mode? (Default is editAll).
    Any others like these would be a huge help.
    Thanks again in advance.
    -bill
    Build JDEVADF_11.1.2.4.0_GENERIC_130421.1600.6436.1

    Timo,
    Maybe that is part of the issue. I was just assuming that a faces table acted the same as an rich faces table in 11g.
    10g namespace:
    xmlns:af=http://xmlns.oracle.com/adf/faces
    11g namespace:
    xmlns:af=http://xmlns.oracle.com/adf/faces/rich
    We had converted the pages to Trinidad in our first attempt so I wrote script to convert the Trinidad component names to rich faces component names (where applicable). UI wise this worked OK, with just some changes to attributes.
    What I am having issues is the actions in the page defs. CreateInsert does not appear to be working and I am wondering if this is due to a property setting. I switched Editing mode to click to edit which seemed to help but it is not perfect.
    I am reading/researching to try and figure this out. Just looking for something to help with the learning curve.
    Thanks.
    -bill

  • How to Revert back the changes from the new version to old version

    Hi, I need to revert back the changes in one of the Objects in Intergration Directory.  Which means, I need to de-activate the existing version, and have the old version activated again.  Can you help me on the steps on doing this?  Thank you.

    Mary,
    If you have just saved urt object in IR / ID and not activated it, then u can simply go to the change list tab and right click on ur object and do " Reject changes".
    if u have already activated the same, then u wud b required to open the object in IR/ ID.
    Click on the history option and double click and open the same object version that u want and activate it.
    regards,
    Vishal

  • Change from PSE12 Swedish version for a PC to a Mac?

    I bought a PSE12 licence for my PC in Swedish. I have now changed to a Mac and I cant install the swedish program on the Mac. Do I have to by a new licence or can I upgrade my present PSE12 for the Mac?

    I bought a PSE12 licence for my PC in Swedish. I have now changed to a Mac and I cant install the swedish program on the Mac. Do I have to by a new licence or can I upgrade my present PSE12 for the Mac?

  • Has the official Photoshop CS6 release changed from the beta version?

    That's it really. Are there any substantial differences  or changes in the official release?

    It should look the same to the users. No big new features were added, just some bug fixes.
    Pattie

  • How to Transport changes from Dev. to Quality and production

    Hello Friends,
    I've done the below changes in IR
    1.Added idoc in Imported Idocs
    2.Added new Interface Mapping
    3.Added new Message Mapping
    In ID:
    Chagned Receiver Agreement
    Changed Interface Agreement
    Please let me know how i can move the changes to Quality and Production..
    Pls. provide me the steps to create Transport and how to transfer.
    Thanks in advance!!!
    Best Regards
    Prasad

    Hi,
    By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
    We can do some changes to move
    Moving Dev to QA changes
    1.SLD: are there any changes we need to do.
    If you have common SLD, then I doubt if you may need any changes on SLD side.
    The Business systems you had used will be the same you may use in Q-Landscape.
    2.IR: are there any changes we need to do.
    ---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
    3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
    do.I am confused here.
    You need to reconfigure all communication channels, if SLD changes are OK then business system will
      change automatically and in communication channel just filled in correct IP/password etc.
    ---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
    Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
    4.RWB: such as alerts,and if there are any...
    --> The Alerts will not be transported....you need to create it as new setup for every box.
    Check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

  • How to port database changes from development to a production environment

    How do I port database changes from the development to the production environment?
    I am using v8 and have always had to redo everything using the schema manager all over in the production environment. Is there an easy way to generate a script, for example to dump the database changes on the development machine to be executed later on the production machine?

    This should already be a clearly defined change control process. Once a procedure, function, package, trigger, or whatever completes the testing rounds, it should be promoted to production.
    Forgive me if it seems I'm trivializing, but I don't see the problem, just copy the object(s) from your software library (or development) into production using whatever tool works best or has been chosen. If you are doing data copies then you have various options again including good old export/import.

  • BPC NW 10.0 - Data Manager Prompt changing from SELECTINPUT to SELECT cleared values

    Dear BPC Experts,
    We recently went from SP13 patch 4 to SP19 patch 1.  When we made changes in the PROMPT values in the Data Manager Organize>Package>Modify Script>PROMPT, we experienced different behavior switching from SELECTINPUT to SELECT in our development system than we did in our production environment.  In development, when we changed the value from SELECTINPUT to SELECT, the values entered for Variable name such as %SELECTION% in Property1 and "Select the members to CLEAR" in Property2, and %DIMS% remained.  However, when we changed from SELECTINPUT to SELECT in production system, the values for Variable Names and Properties were cleared out.  Does anyone know why in our developmet system values were kept but not in our production system during this type of activity?  I would like to understand the two different behaviors and what controlled it.  We prefer not to have the values for Properties clear.
    Thank you in advance for your assistance.
    Kind regards,
    Lisa

    Hi Vadim,
    Excellent point, I should have included images as that likely would have shown this odd behavior.
    When I made the changes in our development system to a package to switch from SELECTINPUT to SELECT the values outlined in the image below were retained for Varialbe Name, Property 2, and Property 3 after we applied the SP19 patch 1.
    When I made the same change in our system to a package in our production system after we applied the SP19 patch 1, the values for Varialbe Name, Property 2, and Property 3 were cleared per the image below.  The odd thing is that initially it looked like the values stayed.  It was only after you saved and went back in did you see that the values were gone.
    Any help in understanding this behavior change would be greatly appreciated.
    Thank you,
    Lisa

  • Disappointed with 10g JDeveloper preview version

    I consistently use and recommend Oracle products to my co-workers. But I am disappointed with the latest JDeveloper, thanks to many bugs. I could not find basic items like remove from project menu item. The files I open are not getting added to the project. And the continuing lack of decent support for PL/SQL. If Oracle can't support PL/SQL, in its IDE that is hard to believe. This forces me to use 2 IDEs. One for Java and another one for PL/SQL. Hope it will get better in the production release.

    All files from a folder are automatically added to a project, it is automatically recompiled with a build command. The file can be "invisible". To see a new file in the navigator, use the refresh button.
    There should be several changes to this behaviour:
    1) refresh is quite slow on a big project. It should be possible to select a package and refresh only the files inside the folder
    2) When a file is opened, it should be automatically added into the navigator of the current project.
    3) To remove a file from a project, it seems there are only 2 solutions:
    3a) Use a different hierarchy tree for each project (ie: locate each project source in a different folder) and carefully remove the files you don't need. Huge pain with versioning and check out module. You have to check out each file individually.
    3b) refactoring. Move the file in a new folder and exclude that "subfolder" in the project content (first page in the project properties).
    In the long term this refactoring could be a good thing. In the short term it is a major pain because most projects use intertwined packages.
    Some examples:
    1) I use only one hierarchy tree for several projects. I have to include much more libraries in my projects to be able to compile. For example, I have a swing application. In a package used by this swing application, one class does an import of some j2ee stuff.
    I never use this class in the swing application. I have to include all the j2ee libs to compile my project.
    2) I have a factory constructor interface dealing with java.sql.DataSource.
    I have several implementations depending on the target jdbc driver (classes12.jar ojdbc14.jar,mysql-connector-java-2.0.14-bin.jar,...). Each implementation is put in the same folder:
    /mycompany/mypackage/MyDataSourceOracle14.java
    /mycompany/mypackage/MyDataSourceOracle12.java
    /mycompany/mypackage/MyDataSourceMySql.java
    The implementation with classes12.jar is incompatible with the one with ojdbc14.jar.
    With JDev 10g preview, there is just no way to rebuild my project. I had to refactor and use subfolders:
    /mycompany/mypackage/Oracle14/MyDataSourceOracle14.java
    /mycompany/mypackage/Oracle12/MyDataSourceOracle12.java
    /mycompany/mypackage/MySql/MyDataSourceMySql.java

  • Access violation after changing from OCCI 10g to OCCI 11g

    I am moving my program from OCCI 10g and Visual Studio 2005 (VC8) to OCCI 11g and Visual Studio 2008 (VC9). I have downloaded the new instant client and SDK files (11.2.0.1), and everything builds OK. Using OCCI 11g, my program can write a spatial table to our Oracle Spatial 10g database, but when I try to read the data back, I get an access violation reading a spatial object (SDO_GEOMETRY). I am able to read the spatial table I created using OCCI 11g successfully using an earlier version of my application that uses Instant Client 10g.
    I used OTT from 10g to create the class that wraps SDO_GEOMETRY. I tried generating new code from OTT in 11g, but the result matched the code generated in 10g.
    The crash happens in a call to oracle::occi::ResultSet::GetObject(), and the top method in the call stack that has source code is:
    // Note: this is part of the object wrapper generated by OTT.
    void SdoGeometryBase::readSQL(void ctxOCCI_)
    SdoGeometryBase *objOCCI_ = new(ctxOCCI_) SdoGeometryBase(ctxOCCI_);
    oracle::occi::AnyData streamOCCI_(ctxOCCI_); <--- Access violation happens on this call.
    This happens on the first attempt to read an SDO_GEOMETRY object.
    Has anyone run into a similar problem?
    Thanks,
    Bob

    I am bumping this thread in hopes that someone might have run into this same problem or be able to give me some suggestions as to how to go about solving it. My program can connect to the database and query the list of tables or other non-spatial data, but when I try to read an SDO_GEOMETRY object I get the crash described below. The crash happens on both Windows XP and Windows 7. As far as I can tell, I am using the latest instant client and SDK files for Oracle 11g.
    Were there any changes between 10g and 11g that would force me to change my code?
    Thanks,
    Bob

  • Version Change from 10.2.0.3.0 to 11.2.0.4.0 - Column ambiguously defined

    Hi,
    Our oracle version has been upgraded from 10g to 11g.
    After upgrade we face serious problem in compiling several packages, procedures and views and that throws an error "Column Ambiguously Defined", which was running perfectly in 10g version.
    I have come through several blogs like, this problem occurs for many ppl as part of upgrade from 10g to 11g and the only solution is to change the code.
    But in our case we have many numbers of objects like procedures, packages and views where this error occurs, do we have any common solution for overcome this problem (without changing the code)?
    Regards,
    Ananth

    e7a47215-0e59-4d88-a082-7ad5e83ce5b0 wrote:
    Hi,
    Our oracle version has been upgraded from 10g to 11g.
    After upgrade we face serious problem in compiling several packages, procedures and views and that throws an error "Column Ambiguously Defined", which was running perfectly in 10g version.
    I have come through several blogs like, this problem occurs for many ppl as part of upgrade from 10g to 11g and the only solution is to change the code.
    But in our case we have many numbers of objects like procedures, packages and views where this error occurs, do we have any common solution for overcome this problem (without changing the code)?
    Regards,
    Ananth
    You will need to bite the bullet & change the code

  • I aam thinking of changing from a PC to a Mac.  Will I need to buy a new Apple compatible version of Lightroom, do I have to pay to upgrade or can I get the new version free?

    I am thinking of changing from a PC to a Mac.  Will I need to buy a new, Apple compatible, version of Lightroom, or can I upgrade to it, or can I get it free as I've paid for the PC version?

    Your licence is not platform specific, so Lightroom can be used on any two machines (Mac and/or WIndows), with one actually being used at any given time.
    So no, you're money's safe!

  • I have purchased a film from the istore and it had transferred to my download but I can not do it as it say I don't have enough storage. I pressed the he version and know SD are smaller how can I change it to SD version?

    I have purchased a film from the istore and it had transferred to my download but I can not do it as it say I don't have enough storage. I pressed the HD version and know SD are smaller how can I change it to SD version?

    Tap Settings > General > About then swipe down, you'll see Available.
    Make sure there's at least 500MB's of storage space.

Maybe you are looking for

  • How to fill Long Text in Accounting document in the item level.

    Hi, I need to fill Long Text field in item level of accounting document from the header texts from Billing header(say billing instructions) I checked the user exit EXIT_SAPLV60B_008 but it didnt worked in my case. I have read the billing instructions

  • Valuation Grouping code

    I created a new valuation class and copied the same G/L accounts corresponding to the old valuation class for all valuation group code.But in omwb where used list i am not able to view the G/L accounts for some valuation group code although all accou

  • Menu Not Found during Runtime

    Dear Colleague, My customer attempted to run the new version of the Oracle 9i Forms application that I developed for him. He successfully started the initial form, but the referenced menu file within the initial form is not found. There is no path in

  • SAP ERP Sharepoint integration

    Hi, Apologies if this is not the correct forum for this question. I am trying to get work orders and permits from SAP ERP 4.7 or SAP ERP ECC 6.0 into a Sharepoint site. Has anyone done this or something similar? Can someone point out helpful document

  • Elements 11 Qustion

    I can not get my images to inport.  What happend was.  I was moving images from the camera to the computer when the cord was puled out.  I put it back in and it started again but then would not inport.  I then had issues that everytime i opend up the