Database adapter - timezone value not being picked up

We are using Oracle SOA suite v 11.1.1.6, along with database adapter to connect to different Oracle database - D1 and D2. All 3 system - SOA suite, D1 and D2 are set to different timezones. Within the SOA composite, we are using Database adapter to
query data from Oracle database
execute pl/sql stored procedure in Oracle database.
In all cases we noticed that the date time data seen in the SOA EM console is same as in the respective database system, but surprisingly the timezone value in the data field is constant and it does matches with that of SOA suite.
<D1_DATE>2013-08-15T01:10:00.000-06:00</D1_DATE>
<D2_DATE>2013-08-15T02:10:00.000-06:00</D2_DATE>
Ideally the timezone value should match with that of respective database, from where the date value is being picked up. Did we miss any set up or this a known issue ?
Thanks.

The database column is of "Date" data type. Was just checking, if the DB adapter can be configured to look into the timezone set at the Oracle data base and use that along with the actual data in the "Date" type column
Am aware that, if i use the "Timestamp with Timezone" it works good.
Thanks.

Similar Messages

  • File not being picked by adapter

    My Source file name is xml_a1_en.xml
    the test files are of name xml_a1_02_en_2010.xml , xml_a1_03_en_2010.xml
    the files are not being picked up by adapter..Is the naming convention wrong for the test files or any reason?

    Hi Mr.King,
    I am assuming your OS is Unix system right?
    If yes -> check the file permission?
    if Only Reading: permission should be 664
    Move the file after reading: 775
    Regards,
    Senthilprakash

  • Large files not being picked by FTP adapter

    Hello,
    In our integration scenario, files from the AS400 (legacy system) are placed at a FTP location from where the XI picks up the file for processing. We have FTP communication channel.
    The file has about 8000 records is in binary format. When the file was placed it was not being picked up after the mentioned polling period of 60 secs. After manually inserting about 300 records which makes the file size smaller, the file is picked up bu XI and processed without error. With the 8000 records the file size was 2.5 MB.
    Thank you

    Please provide a J2EE trace at logging severity "Debug" for the location
    "com.sap.aii.adapter.file". Please do the following:
    - increase logging severity to "Debug"
    - set log levels to ERROR for all components
    - ONLY set log level to DEBUG for "com.sap.aii.adapter.file"
    - reproduce the problem and gather the defaultTrace.trc immediately
      after you reproduce
    - remember to reset the logging severity after you have reproduced as
      leaving it on "Debug" can cause performance problems in your system.
    Also the ftp server logs will be needed in this case.

  • Agreements Not Being Picked For SFTP Protocol in Oracle 11G

    Hi Anuj ,
    PFB the Details of the Issue :
    Agreements are not being picked for SFTP protocol even though From TP , To TP , Document Type and Revision are picked correctly .
    We are running on MLR11 , Version : 11.1.1.4.0 . Also we have set b2b.useCPAid to false in EM Properties so that Agreement is picked based on DocType Name , Revision and Partner Id's .
    Also when we used File Protocol its working Fine . The problem exists for SFTP Protocol .
    Error Code : B2B-50547
    Error Description     Machine Info: (gwl09072appg084) Description: Agreement not found for trading partners: FromTP TestEbxml, ToTP BTGS with document type rqRequestServiceRequest-1.0-INBOUND.
    Patch Level : 14114625
    Regards,
    Rohith

    Hi Anuj ,
    Thanks for the reply .
    Yes we are setting the Filename Format explicitly in the LC . As far as we have understood , naming convention FromTP_MSGID.xml
    is used to identify the TP and also MSGID is used to avoid duplicates and identification xpath is set to identify the Action .
    When we are using %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%TIMESTAMP%.xml , All parameters are identified as expected and Agreements are also being picked when we are using File Protocol . Only when we are trying with SFTP Prtocol , even though all values are being picked correctly , only agreement is not being picked . Could you please help ?
    Regards,
    Rohith

  • In Production Order Old Raw Material Batch No. not being picked (FIFO)

    Hi,
    We have activated Batch Management for ROH type of Materials with Split Valuation and the Strategy applied is FIFO.
    We have generated many such batches and consumed too, but lately out of many ROH mateials, 2 ROH who have Old Batches are not being picked and the Batch which is recently created is being picked at the time of Production Order Release.
    We have not done any changes into the Master Data nor the config during this period.
    Can anyone help what can be the issue ?
    Thanks in advance,
    Harris Panchal

    Hi,
    Actually our requirement is that we want to sort out the Batch as per the Earliest one and consume the earliest first, i.e. FIFO strategy.
    For that the MM Consultant has configured the following Charac:
    1. Stock Determination: Priority
    2. Value Assignment Type
    3. Batch Number
    Which I am feeling should be changed and to be as per the following:
    1. Created On
    2. Batch Number
    In OMCV, Classification is active with following option:
    4     Classification in foreground for new batches only for the following movements: 101, 309, 310, 561
    3     Classification always in foreground (all batches)   for the following movements: 321, 501
    Requesting your valuable inputs,
    Thanks and regards,
    Harris

  • Delivery document not being picked while creating shipment document

    Dear All,
    Issue is regarding creation of shipment document.
    As i am creating shipment document in VT01N, am unable to get the delivery doc . ie., delivery document is not picked in shipment creation.
    I have created a sales order, picking is completed n saved, PGI not yet been done.
    Am unable to create a shipment document due to delivery document not being picked.
    i/p's will be of great help.
    with regards,
    Vijayashree

    Dear all,
    The issue is solved.
    As the Route was not picking in Sales Order so the delivery was not picked in shipment creation.
    Route determination setting was not correct.
    Regards,
    Vijayashree

  • Item in sales order not being picked into picking list

    Hi Gurus,
    Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list?
    Many Thanks
    Choudry

    Hi
    Delivery creation that is selection date is controlled by the schedule line of the line item in the sales order
    Try by changing the schedule lines in sales order in VA02
    there you try to change the delivery date to past
    It might be possible if you had enough stocks at that time
    Regards
    Raja

  • What's the error?  Longtime site not being picked up by Google

    This site has been up for a year and is not being picked up by Google. What is the problem?
    Any suggestions much appreciated.
    www.elspethcameron.com

    +(sorry for my english, it usually is better than that I think/hope)+
    Ok... Let's see...
    www.elspethcameron.ca is just a forwarding url with cloaking (masking, masking the real url) enabled so it's not dynamic it doesn't change when visiting different pages. It is listed in google
    http://www.google.ch/search?hl=en&q=site%3Awww.elspethcameron.ca&btnG=Search&met a=
    but there is no content under this url because it is just forwarding visitors to the real website, just like a link would do that.
    The real website is, at least partially, on google with its content as you can see here
    http://www.google.ch/search?hl=en&q=site%3Aweb.mac.com%2Felspethcameron%2F&btnG= Search&meta=
    The other parts of the website are not indexed by google. I think that is because google is not able to crawl the nav bar because it is javascript rendering. You could make a second nav bar by your own and put it on the bottom of the page. Simply add a text field and put normal links in it to the other websites. Google will then follow them next time indexing your page.
    In addition to that you should watch the thread I posted before. Note that by making your sitemap you don't use www.elspethcameron.ca but the real url.
    Regards,
    Cédric

  • TS1363 My new IPod is not being picked up by my computer.  What should I do?

    My new IPOD is not being picked up by my computer.  What should I do?

    @vic_suav, thanks for the additional information. Could you please try to see if this does the trick?
    Quit iTunes on your PC, switch your iPhone on and make sure it's not locked, before connecting it to your computer. Then wait a minute or two until the "Download Photos" dialogue box pops up. When that happens, launch iTunes and wait a minute or two until iPhone shows up as a connected device.
    If the above doesn't work, follow the steps in 'How to restart the Apple Mobile Device Service (AMDS) on Windows' to restart the Apple Mobile Device Service, here: http://support.apple.com/kb/TS1567
    Otherwise, please try a different USB port on your PC. Then in your Windows 7, click Start and choose Control Panel. Click "Uninstall a program". Then verify that Apple Mobile Device Support is visible in the list of currently installed programs. If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. For removing and reinstalling iTunes, QuickTime, and other software components for Windows Windows 7, follow these steps: http://support.apple.com/kb/HT1923
    if all of the above fail, you can try some of the troubleshooting steps outlined in 'iOS Device not recognized in iTunes for Windows' article: http://support.apple.com/kb/TS1538
    Let me know how it goes. Good luck!

  • Object Size and Position values not being retained

    Hi,
           I'm trying to set the size and position of a picture object in a report. This logo, should appear on the top right corner of the report.
    The margins of the report are Left - .79 in, Right - 0.79 in, Top - 0.79 in and Bottom - 0.39 in.
    The size of the picture object should be 1.574 x 0.79 inches.
    I have ensured that File -> Page Setup -> dimensions are in INCHES.
    I right click the logo and select 'Size and Position'.
    I set 'Y' (distance between top of object and top margin) = 0. This is to perfectly align the object with the top margin.
    Now, i set the height of the object = 0.79 inches. Ok the dialog and close.
    The strange thing happening is, when i re-open the size and position dialog, i see that the values i set are not being retained.
    0.79 becomes 0.810
    and
    0 become -0.010.
    What am i doing wrong here? How can i make sure the values i specify in the size and position dialog are  retained.
    Thanks.

    Ensure File | Options | Layout tab has the following UNMARKED!!!!
    Design View
      Guidelines
      Grid
    Preview
      Guidelines
      Grid
    Ensure that "Snap to Grid" is turned off.
    Make your grid size larger (.5 inches for example)
    What is occurring (I suspect) is that your objects are snapping to the grid - thus changing the position and possibly size due to the Snap to Grid being turned on.

  • Problem in Search Help[F4] - Values Not being Dsplayed

    Hi,
    Search help values are not being displayed.
    F4 help pop up is being displayed with the text on top: ' xxxx number of entries found".
    But no values are visible in that popup where it normaly displayes all values for selection. This is happening with all search helps.
    Example: I tried for Tcode: ME21, for field Vendor.
    =><i>No patch has been applied on Server recently.</i>
    Any clue on that..??
    Any help is appriciated.
    Regards,
    Vijay Raheja

    Hello Vijay,
    This is simple as well.
    Go to help then settings and then F4 help. Under system defaults tab strip you will find Display tab strip. Here go to change mode and choose dialog. The other choice will be for control only ( 2 radio buttons only this time around). However to do so make sure you have the authorization object S_ADMI_FCD with value TCTR.
    Ask yoru authorization adminstrator to make these changes. He would be having these authorizations. Normally all  users dont have this authorization as this is part of security audit considerations.
    Please award points if issue got solved.
    Regards.
    Ruchit.

  • File Adapter: File is not being pickedup

    Hi,
    I used File adpter,The file is in apllication server(AL11),
    I must process that file.
    I has given parameters as
    Source Directory : /SAPInterface/biztalk/LPD/D60/in
    Filename  : XITRG_*.XML
    Poll Interval -
    10 Sec
    Processing Mode--- Delete.
    I checked in component monitoring.....Communication channel is active and OK.
    Dropped a file in AL11, but the file is not getting picked by the communication channel  from the application server.
    Please help me in this.
    Srinivas

    Srinivas,
    How you are viewing the files...
    You can see the permissions in the property of that file...
    If you are using FileZilla then right click the file and set the values to 777 if i remember right...
    You can ask your BASIS also for this to check the file permissions....
    If you use Filezilla the file property will be having those values and give permission according to
    the requirement
    Thanks
    Sebin
    Edited by: SEBIN B THOMAS on May 9, 2008 2:09 PM

  • Database Adapter Logical Delete Not Working....

    Hi,
    I have an issue with the DB Adapter under BPEL GA 10.1.3.1. I'm trying to do a logical delete on a table however the logical delete isn't updating the records to show that they've been processed.
    I've created a simple test case with a 3 column table sitting in Oracle XE DB with the third column containing the logical delete flag. I've created a new process consisting of a DB Adapter partnerlink and a receive. In the logs (below) I can see the Select statement followed by the Update (logical delete) occurring but the Update statement just actually run against the DB. I can copy the update statement and run this through SQL as the same DB user and it updates the records.
    Has anyone seen this before?
    Thanks.
    <2006-11-13 15:06:30,901> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> client acquired
    <2006-11-13 15:06:30,917> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> SELECT A, B, C FROM F_TABLE WHERE (C = ?)
         bind => [IN]
    <2006-11-13 15:06:30,917> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> client acquired
    <2006-11-13 15:06:30,917> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> TX beginTransaction, status=NO_TRANSACTION
    <2006-11-13 15:06:30,917> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> TX Internally starting
    <2006-11-13 15:06:30,917> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> external transaction has begun internally
    <2006-11-13 15:06:30,917> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.DBAdapterConstants isElementFormDefaultQualified> Element is FTABLE namespace is http://xmlns.oracle.com/pcbpel/adapter/db/top/ReadTABLE
    <2006-11-13 15:06:30,933> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.ox.O_XParser parse> Transforming the row(s) [<FTABLE Record A />, <FTABLE Record B />, <FTABLE Record C />] read from the database into xml.
    <2006-11-13 15:06:30,933> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> [Read_TABLE_ptt::receive(FTABLECollection)]Posting inbound JCA message to BPEL Process 'Read_TABLE' receive activity:
    <FTABLECollection xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/ReadTABLE">
    <FTABLE>
    <a>Record</a>
    <b>A</b>
    <c>IN</c>
    </FTABLE>
    <FTABLE>
    <a>Record/a>
    <b>B</b>
    <c>IN</c>
    </FTABLE>
    <FTABLE>
    <a>Record</a>
    <b>C</b>
    <c>IN</c>
    </FTABLE>
    </FTABLECollection>
    <2006-11-13 15:06:30,933> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Delivery Thread 'JCA-work-instance:Database Adapter-6 performing unsynchronized post() to localhost
    <2006-11-13 15:06:31,073> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> Begin batch statements
    <2006-11-13 15:06:31,073> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> UPDATE F_TABLE SET C = ? WHERE ((A = ?) AND (B = ?))
    <2006-11-13 15:06:31,073> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log>      bind => [OUT, Record, A]
    <2006-11-13 15:06:31,073> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log>      bind => [OUT, Record, B]
    <2006-11-13 15:06:31,073> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log>      bind => [OUT, Record, C]
    <2006-11-13 15:06:31,073> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> End Batch Statements
    <2006-11-13 15:06:31,073> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> TX commitTransaction, status=STATUS_ACTIVE
    <2006-11-13 15:06:31,073> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> TX Internally committing
    <2006-11-13 15:06:31,323> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> external transaction has committed internally
    <2006-11-13 15:06:31,323> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> client released
    <2006-11-13 15:06:31,323> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> onBatchBegin: Batch 'bpel___localhost_default_Read_TABLE_1_4__1163389596916.ReadTABLE.FTABLE1163394391323' (bpel___localhost_default_Read_TABLE_1_4__1163389596916.ReadTABLE.FTABLE1163394391323) starting...
    <2006-11-13 15:06:31,323> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> onBatchComplete: Batch 'bpel___localhost_default_Read_TABLE_1_4__1163389596916.ReadTABLE.FTABLE1163394391323' (bpel___localhost_default_Read_TABLE_1_4__1163389596916.ReadTABLE.FTABLE1163394391323) has completed - final size = 3
    <2006-11-13 15:06:31,323> <DEBUG> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.TopLinkLogger log> client released
    <2006-11-13 15:06:31,339> <DEBUG> <default.collaxa.cube.engine.bpel> <BPELExecution::Read_TABLE> entering <scope> at line [no line]
    <2006-11-13 15:06:31,339> <DEBUG> <default.collaxa.cube.engine.bpel> <BPELExecution::Read_TABLE> entering <scope> at line [no line]
    <2006-11-13 15:06:31,339> <DEBUG> <default.collaxa.cube.engine.bpel> <BPELExecution::Read_TABLE> entering <sequence> at line 55
    <2006-11-13 15:06:31,339> <DEBUG> <default.collaxa.cube.engine.bpel> <BPELExecution::Read_TABLE> entering <sequence> at line 55
    <2006-11-13 15:06:31,339> <DEBUG> <default.collaxa.cube.engine.bpel> <BPELEntryReceiveWMP::Read_TABLE> executing <receive> at line 58
    <2006-11-13 15:06:31,339> <DEBUG> <default.collaxa.cube.engine.bpel> <BPELEntryReceiveWMP::Read_TABLE> set variable 'Read_TABLE_receive_InputVariable' to be readOnly, payload ref {FTABLECollection=108e2d22815529ac:-3067a9ff:10edf296212:-78da}
    <2006-11-13 15:06:31,339> <DEBUG> <default.collaxa.cube.engine.bpel> <BPELEntryReceiveWMP::Read_TABLE> variable 'Read_TABLE_receive_InputVariable' content {FTABLECollection=oracle.xml.parser.v2.XMLElement@1303465}
    <2006-11-13 15:06:31,339> <DEBUG> <default.collaxa.cube.engine.bpel> <BPELInvokeWMP::Read_TABLE> executing <invoke> at line 61

    Hi,
    I haven't yet used 10.1.3, but we had a number of issues under 10.1.2.0.2 around caching and upd/ins/del.
    A number of things we changed were
    - set usesBatchWriting to false in oc4j-ra.xml file
    - set identityMap to NoIdentityMap via toplink work bench
    - set should-always-refresh-cache-on-remote,should-disable-cache-hits,should-disable-cache-hits-on-remote to true in toplink mappings.xml file (note this last one is only if toplink was not used to insert the source data).
    Ashley

  • Net value not being updated from Pricing Element/Pricing condition

    Hi All,
    User confirm activity of 40 hours in CJ20n of Project System. When we are creating RRB(Resource Related Billing) request for billing of 40 hours using DP91, Net Value is coming Zero where as pricing condition for the item is upodating Basic Price from quantity of 40 hours.
    Please adise, why Net Value field is not being updating.
    Regards
    Rajesh

    hi monty,
    first of all please check the validity and other criteria by which sytem populates the pricing records in to the sales order.
    this can be easily done by refering to past "pricing" posts.
    also
    kindly check on the reference status whether this order is getting referenced and pricing values from a preceeding document like  sales quotation,because if the conditions mentioned by you are not in the preceeding saes document then it will not get populated ,hence you have to update pricing by going on to the conditions tab,
    update me so that other solutions can put to you
    regards
    Mohit Singh

  • Database Adapter Wizard does not show accessible table

    HI guys,
    in the wizard I am unable to see the tables which I need to use for database adapter.
    But I do have access to those tables, and able to select from them in SQL worksheet from with in Jdev.
    I dont own the tables, but my user id have readable access to those tables.
    Any help is appreciated.
    P.S. If I didnt explain it properly, plz let me know. It really creates lot of access issues if I can only create DB adapter on My owned tables.
    :)

    Hi there,
    please see the answer to your duplicate post on the BPEL forum:
    DB Adapter does not show selectable tables
    In general BPEL forum gets a lot more traffic but I will try to address questions on both equally.
    Thanks
    Steve

Maybe you are looking for

  • Printer won't print pictures, only text

    I have an MX452 All-In-One printer. I don't do a lot of printing, and most of what I do is text. Today I tried printing a picture, and everytime I try I get a message stating that the printer is offline. The printer is NOT offline -- I know this beca

  • Putting background solid/block behind text?

    New to Muse (1st day) no background in web development. Have created a master template that has a tiled image for browser background fill.  Page text does not display well on top of the background image so I added a white solid block that serves to d

  • SQL Server Agent gives- Remote procedure call failed (0x800706be)

    I can't access SQL Server 2008 R2 remotely on Windows 2008 1.  TCP/IP Enabled for SQL Server Network Configuration Protocols, SQL Native Client 10.0 configuration clients, and SQL Native Client 10.0 configuration clients(32 bit) 2.  Firewall disabled

  • Is it possible to search kids movies by price?

    I would like to be able to quickly view prices of movies, especially kids movie. I am wondering if there is a "by price" option, like the "by age" option?

  • My HP tablet won't charge

    my tablet won't chare when i hook up the charger then when i take  the charger out of the port it says it is charging it hasn't turn on sicen feb,1