Database check error on DB02-- Alert

Dear All,
We found the below errors on DB02 -->Alert .
E     22.12.2010     12:02:31     10     DBA     MISSING_INDEX          1     Table: SAPSR3.ZBIMIS # Table has no index
W     22.12.2010     12:02:31     0     DBO     ARCHIVE_TOO_OLD          1     Operation: 'Archive log backup' has not been run # Operation too old or has not been run in clean-up period
W     22.12.2010     12:02:31     0     DBO     BACKUP_TOO_OLD          1     Operation: 'Complete database backup' has not been run # Operation too old or has not been run in clean-up period
W     22.12.2010     12:02:31     6     DBO     OPERATION_TOO_OLD     chk     1     Operation: 'chk' has not been run # Operation too old or has not been run in clean-up period
W     22.12.2010     12:02:31     6     DBO     STATS_TOO_OLD          1     Operation: 'Update optimizer statistics' has not been run # Operation too old or has not been run in clean-up period
W     22.12.2010     12:02:31     6     ORA     00060          5     Time: 2008-11-07 21.41.35, line: ORA-00060: Deadlock detected. More info in file /oracle/IRP/saptrace/usertrace/irp_ora_606586.t
E     22.12.2010     12:02:31     6     ORA     00376          100     Time: 2008-09-26 17.34.39, line: ORA-00376: file 1 cannot be read at this time
E     22.12.2010     12:02:31     6     ORA     00470          2     Time: 2010-02-25 05.34.41, line: ORA-470 signalled during: ALTER DATABASE DISMOUNT...
E     22.12.2010     12:02:31     6     ORA     00471          3     Time: 2008-10-10 18.05.57, line: ORA-00471: DBWR process terminated with error
E     22.12.2010     12:02:31     6     ORA     00474          1     Time: 2010-03-10 04.47.53, line: ORA-00474: SMON process terminated with error
E     22.12.2010     12:02:31     6     ORA     00600          2     Time: 2010-02-12 11.41.38, line: ORA-00600: internal error code, arguments: [1433], [60], [], [], [], [], [], []
E     22.12.2010     12:02:31     6     ORA     01113          10     Time: 2008-11-28 18.38.28, line: ORA-1113 signalled during: ALTER DATABASE OPEN...
W     22.12.2010     12:02:31     6     ORA     01555          1     Time: 2010-09-08 10.01.09, line: ORA-01555 caused by SQL statement below (SQL ID: 6cbacdfn457j9, Query Duration=57100 sec, SCN:
E     22.12.2010     12:02:31     2     ORA     01652          4     Time: 2010-12-20 10.41.41, line: ORA-1652: unable to extend temp segment by 128 in tablespace                 PSAPTEMP
E     22.12.2010     12:02:31     6     ORA     01653          100     Time: 2010-12-09 16.17.30, line: ORA-1653: unable to extend table SAPSR3.BALDAT by 128 in                 tablespace PSAPSR3
E     22.12.2010     12:02:31     6     ORA     01691          20     Time: 2010-12-09 16.10.05, line: ORA-1691: unable to extend lobsegment SAPSR3.SYS_LOB0000072694C00007$$ by 128 in tablespace
E     22.12.2010     12:02:31     6     ORA     16038          100     Time: 2008-10-26 13.55.06, line: ORA-16038: log 4 sequence# 1472 cannot be archived
E     22.12.2010     12:02:31     6     ORA     19502          100     Time: 2008-10-26 13.55.06, line: ORA-19502: write error on file "/oracle/IRP/oraarch/IRParch1_1472_664127538.dbf", blockno 79873
E     22.12.2010     12:02:31     6     ORA     19504          1     Time: 2009-07-09 17.34.49, line: ORA-19504: failed to create file "/oracle/IRP/oraarch/IRParch1_14699_664127538.dbf"
E     22.12.2010     12:02:31     6     ORA     19510          11     Time: 2008-10-26 14.17.54, line: ORA-19510: failed to set size of 85896 blocks for file "/oracle/IRP/oraarch/IRParch1_1473_66412
E     22.12.2010     12:02:31     6     ORA     27044          1     Time: 2009-07-09 17.34.49, line: ORA-27044: unable to write the header block of file
E     22.12.2010     12:02:31     6     ORA     27063          100     Time: 2008-10-26 13.55.06, line: ORA-27063: number of bytes read/written is incorrect
E     22.12.2010     12:02:31     6     ORA     27072          2     Time: 2009-06-20 11.03.58, line: ORA-27072: File I/O error
W     22.12.2010     12:02:31     9     ORA     Checkpoint not complete          100     Time: 2008-08-29 22.02.36, line: Checkpoint not complete
W     22.12.2010     12:02:31     10     PROF     LOG_BUFFER          1     Value: 14238720 (>< 4096,512 KB) # Size of redo log buffer in bytes
W     22.12.2010     12:02:31     10     PROF     OPTIMIZER_FEATURES_ENABLE          1     Value: 10.2.0.1 (set in parameter file) # Optimizer plan compatibility parameter
W     22.12.2010     12:02:31     10     PROF     OPTIMIZER_INDEX_COST_ADJ          1     Value: 20 (set in parameter file) # Optimizer index cost adjustment
E     22.12.2010     12:02:31     10     PROF     REPLICATION_DEPENDENCY_TRACKING          1     Value: TRUE (<> FALSE) # Tracking dependency for Replication parallel propagation
W     22.12.2010     12:02:31     10     PROF     STATISTICS_LEVEL          1     Value: TYPICAL (set in parameter file) # Statistics level
W     16.12.2010     08:31:09     6     DBO     LAST_ARCHIVE_FAILED          1     Operation: aeeuepco.cds, time: 2010-12-15 15.53.58 failed with rc = 5 # Last archive log backup failed with rc = 5
W     16.12.2010     08:31:09     6     DBO     LAST_BACKUP_FAILED          1     Operation: beeuekuv.anf, time: 2010-12-15 15.05.33 failed with rc = 5 # Last complete database backup failed with rc = 5
W     13.12.2010     08:29:12     10     DBA     TABLESPACE_FULL          1     Tablespace: PSAPSR3, value: 96.96% (> 95%) # Tablespace full
E     12.12.2010     00:22:33     10     DBA     MISSING_STATISTICS          1     Table: SAPSR3.ZMATCOMP # Table or index has no optimizer statistics
Kindly advise

Dear,
your first error -->MISSING_INDEX ,so create table index to help APAPER,
2& 3->ARCHIVE_TOO_OLD,your system online/offline redo log backup not take for long time so...
4-->DBO STATS_TOO_OLD ,throw db13 to run database/stats update job(daily seclude) ,
regard
vinod

Similar Messages

  • Database check error

    Hi Experts,
    I am getting the following error when I am starting database check through brconnect.
    C:\Documents and Settings\devadm>brconnect  -f check
    BR0801I BRCONNECT 6.40 (42)
    BR0805I Start of BRCONNECT processing: cdzgcybo.chk 2008-11-13 16.46.40
    BR0484I BRCONNECT log file: D:\oracle\DEV\sapcheck\cdzgcybo.chk
    BR0280I BRCONNECT time stamp: 2008-11-13 16.46.42
    BR0301E SQL error -1017 at location db_connect-2
    ORA-01017: invalid username/password; logon denied
    BR0310E Connect to database instance DEV failed
    BR0280I BRCONNECT time stamp: 2008-11-13 16.46.43
    BR0301E SQL error -1017 at location db_connect-2
    ORA-01017: invalid username/password; logon denied
    BR0310E Connect to database instance DEV failed
    BR0806I End of BRCONNECT processing: cdzgcybo.chk 2008-11-13 16.46.42
    BR0280I BRCONNECT time stamp: 2008-11-13 16.46.43
    BR0804I BRCONNECT terminated with errors
    Pl. suggets.
    Thanks
    Neeraj

    hi neeraj,
    use this command :
    brconnect -u / -c -f check
    to check your database.
    ardhian
    http://sapbasis.wordpress.com
    http://ardhian.kioslinux.com

  • Getting error in DB02 after checking Consistency check Unknown objects in A

    Dear All,
    I have getting error in DB02 after checking Consistency check.
    Please find the details.
    I have queries.
    How to correct the Unknown objects in ABAP Dictionary and Optional index is also we have to create please suggest step by step process.    
    Missing in R/3 DDIC      1              11
    Consistency check of 07.04.2009 10:14:24                   
    -- Objects missing in the database          
    Primary indexes                  0
    Secondary indexes                0
    Tables                           0
    Views                            0
    -- Unknown objects in ABAP Dictionary       
      |   |-- DB tables                        1
          |-- DB indexes                      11
         |-- DB views                        12
    -- DB tables without unique index   1
    -- Optional indexes                         
    Too many indexes created         0
    -- Indexes not created            145
    Regards,

    Hi
    Check this may help you
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/e4ff3e65b66976e10000000a1553f6/content.htm
    Regards
    Uday

  • Error in the database check.

    hi all,
    I am getting following error while doing Database check in my system:
    BR0976W Database message alert - level: ERROR, line: 7649, time: 2010-08-26 22.56.27, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7650, time: 2010-08-26 22.56.27, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7654, time: 2010-08-26 22.56.27, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7657, time: 2010-08-26 22.56.27, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7658, time: 2010-08-26 22.56.27, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7662, time: 2010-08-26 22.56.27, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7669, time: 2010-08-26 22.56.27, message:
    ORA-16038: log 1 sequence# 28567 cannot be archived
    BR0976W Database message alert - level: ERROR, line: 7670, time: 2010-08-26 22.56.27, message:
    ORA-19502: write error on file "", blockno  (blocksize=)
    BR0976W Database message alert - level: ERROR, line: 7675, time: 2010-08-26 22.56.27, message:
    ORA-16038: log 1 sequence# 28567 cannot be archived
    BR0976W Database message alert - level: ERROR, line: 7676, time: 2010-08-26 22.56.27, message:
    ORA-19502: write error on file "", blockno  (blocksize=)
    BR0976W Database message alert - level: ERROR, line: 7686, time: 2010-08-26 22.57.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7687, time: 2010-08-26 22.57.02, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7691, time: 2010-08-26 22.57.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7694, time: 2010-08-26 22.57.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7695, time: 2010-08-26 22.57.02, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7699, time: 2010-08-26 22.57.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7709, time: 2010-08-26 22.58.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7710, time: 2010-08-26 22.58.02, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7714, time: 2010-08-26 22.58.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7717, time: 2010-08-26 22.58.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7718, time: 2010-08-26 22.58.02, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7722, time: 2010-08-26 22.58.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7734, time: 2010-08-26 22.59.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7735, time: 2010-08-26 22.59.02, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7739, time: 2010-08-26 22.59.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7742, time: 2010-08-26 22.59.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7743, time: 2010-08-26 22.59.02, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7747, time: 2010-08-26 22.59.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7757, time: 2010-08-26 22.59.04, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7758, time: 2010-08-26 22.59.04, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7762, time: 2010-08-26 22.59.04, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7765, time: 2010-08-26 22.59.04, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7766, time: 2010-08-26 22.59.04, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7770, time: 2010-08-26 22.59.04, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7780, time: 2010-08-26 23.00.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7781, time: 2010-08-26 23.00.02, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7785, time: 2010-08-26 23.00.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7798, time: 2010-08-26 23.00.10, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 77825 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7799, time: 2010-08-26 23.00.10, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7803, time: 2010-08-26 23.00.10, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 77825 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7811, time: 2010-08-26 23.01.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7812, time: 2010-08-26 23.01.02, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7816, time: 2010-08-26 23.01.02, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7826, time: 2010-08-26 23.02.03, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7827, time: 2010-08-26 23.02.03, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7831, time: 2010-08-26 23.02.03, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7839, time: 2010-08-26 23.03.03, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 77825 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7840, time: 2010-08-26 23.03.03, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7844, time: 2010-08-26 23.03.03, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 77825 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7857, time: 2010-08-26 23.03.42, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7858, time: 2010-08-26 23.03.42, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7862, time: 2010-08-26 23.03.42, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7870, time: 2010-08-26 23.04.03, message:
    ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
    BR0976W Database message alert - level: ERROR, line: 7871, time: 2010-08-26 23.04.03, message:
    ORA-27063: number of bytes read/written is incorrect
    BR0976W Database message alert - level: ERROR, line: 7875, time: 2010-08-26 23.04.03, message:
    BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 14251008 (>< 4096,512 KB)
    BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_FEATURES_ENABLE, value: 10.2.0.1 (set in parameter file)
    BR0978W Database profile alert - level: WARNING, parameter: PARALLEL_EXECUTION_MESSAGE_SIZE, value: 2152 (>< 16384,4096)
    BR0978W Database profile alert - level: ERROR, parameter: QUERY_REWRITE_ENABLED, value: TRUE (<> FALSE)
    BR0978W Database profile alert - level: ERROR, parameter: REPLICATION_DEPENDENCY_TRACKING, value: TRUE (<> FALSE)
    BR0978W Database profile alert - level: WARNING, parameter: STAR_TRANSFORMATION_ENABLED, value: FALSE (<> TRUE)
    BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVEL, value: TYPICAL (set in parameter file)
    What are these and how to rectify these?
    Regards,
    Priya

    Hi Priya,
    When you perform database check either using brtools or in tx code db13, SAP will check the health of database system by reading the content of alert_<SID>.log file located in /oracle/<SID>/saptrace/background. Also it checks the contents of database parameters as per the threshold configuration in tx code db17.
    The content of oracle alert log file showed that it cannot write archive log file.. Please see the content of alert_<SID>.log file  and correct the  archive log error creation. The error indicates that either disk block is corrupted or damaged.
    As seen in the error message the error message was created in the month of Aug 2010 and appended in the alert_IRQ.log file located in /oracle/IRQ/saptrace/background.If the error is not present now and if you want to perform database check, then delete old contents from the first line to  till last month in alert_IRQ.log file using operating system. Then save the file and Then perform database check again.
    Please make sure you must monitor database check daily and ensure that if the error occurs for writing archive log file, it is dangerous as archive will stuck and the whole operation hangs.
    The message below is for warning and this can be ignored and this is becasue of threshold configuration. You may change the threshold configuration in tx code db17.
    However warning " WARNING, parameter: LOG_BUFFER, value: 14251008 (>< 4096,512 KB) BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_FEATURES_ENABLE, value: 10.2.0.1 (set in parameter file) BR0978W Database profile alert - level: WARNING, parameter: PARALLEL_EXECUTION_MESSAGE_SIZE, value: 2152 (>< 16384,4096) BR0978W Database profile alert - level: ERROR, parameter: QUERY_REWRITE_ENABLED, value: TRUE (<> FALSE) BR0978W Database profile alert - level: ERROR, parameter: REPLICATION_DEPENDENCY_TRACKING, value: TRUE ( FALSE) BR0978W Database profile alert - level: WARNING, parameter: STAR_TRANSFORMATION_ENABLED, value: FALSE ( TRUE) BR0978W Database profile alert - level: WARNING, parameter"  - is for warning only it could be bug problems. SO there is no need to correct the problem.
    Hope this helps you.
    Thanks and Regards
    apr

  • Error when executing database check using brconnect or in DB13.

    Dear Experts,
    I am facing problem in executing database check using brconnect or in DB13.
    I get the following error:-
    <b>I am giving the last few lines where the error comes</b>
    G:\oracle\MRP\sapbackup                            6      52228060      20440724      60.86             0             0
    G:\oracle\MRP\sapcheck                             6      52228060      20440724      60.86             0             0
    G:\oracle\MRP\sapreorg                             6      52228060      20440724      60.86             0             0
    BR0252E Function _stat() failed for 'G:\oracle\MRP\saptrace' at location BrDiskStatGet-1
    BR0253E errno 2: No such file or directory
    BR0277E Determination of disk volume status for G:\oracle\MRP\saptrace failed
    BR0806I End of BRCONNECT processing: cdvnwuiw.chk 2007-06-23 16.45.39
    BR0280I BRCONNECT time stamp: 2007-06-23 16.45.39
    BR0804I BRCONNECT terminated with error
    <b>This is the config path in my init<sid>.ora.</b>
    *._OPTIM_PEEK_USER_BINDS=FALSE
    *.background_dump_dest='F:\oracle\MRP\saptrace\background'
    *.compatible='10.2.0'
    *.control_file_record_keep_time=30
    *.control_files='G:\oracle\MRP\origlogA\cntrl\cntrlMRP.dbf','G:\oracle\MRP\origlogB\cntrl\cntrlMRP.dbf','G:\oracle\MRP\sapdata1\cntrl\cntrlMRP.dbf'
    *.core_dump_dest='F:\oracle\MRP\saptrace\background'
    *.db_block_size=8192
    *.db_cache_size=281699942
    *.db_files=254
    *.db_name='MRP'
    *.dml_locks=4000
    *.event='10191 trace name context forever, level 1'
    *.FILESYSTEMIO_OPTIONS='setall'
    *.job_queue_processes=1
    *.log_archive_dest='F:\oracle\MRP\oraarch\MRParch'
    *.log_buffer=1048576
    *.log_checkpoint_interval=0
    *.log_checkpoints_to_alert=true
    *.open_cursors=800
    *.optimizer_features_enable='10.2.0.1'
    *.pga_aggregate_target=375599923
    *.processes=80
    *.recyclebin='off'
    *.remote_login_passwordfile='exclusive'
    *.remote_os_authent=true
    *.sessions=96
    *.sga_max_size=563399884
    *.shared_pool_reserved_size=28169994
    *.shared_pool_size=281699942
    *.sort_area_retained_size=0
    *.sort_area_size=2097152
    *.statistics_level='typical'
    *.undo_management='AUTO'
    *.undo_retention=43200
    *.undo_tablespace='PSAPUNDO'
    *.user_dump_dest='F:\oracle\MRP\saptrace\usertrace'
    *.workarea_size_policy='AUTO'
    <b>The path in my system is same as mentioned in the init<sid>.ora</b>
    Please help me to find out cause of the error.
    Thanks

    Dear Mr. Yaroslav,
    Thanks,
    I have checked in <sid>adm user since we have looged in the same user Id.
    There was no entrie for the SAPTRACE in environmental variable.
    I have inserted and given the requried path"F:\oracle\MRP\saptrace".
    Thankyou....hope in my next restart of the server it will work....

  • DB13 Database check getting following error

    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000116, user ID KMDBASIS)
    No application server found on database host - rsh/gateway will be used
    Execute logical command BRCONNECT On host sapbwpor3
    Parameters: -u / -jid CHECK20070822134120 -c -f check
    BR0801I BRCONNECT 7.00 (26)
    BR0252E Function NetShareGetInfo() failed for 'sapmnt' at location BrEnvProcess-89
    BR0253E errno 2310: This shared resource does notexist.
    BR0806I End of BRCONNECT processing: cdvzfvhd.log2007-08-22 13.41.25
    BR0280I BRCONNECT time stamp: 2007-08-22 13.41.25
    BR0804I BRCONNECT terminated with errors
    External program terminated with exit code 3
    BRCONNECT returned error status E
    Job finished

    this post is duplicated at DB13  Database check getting following error.

  • Database Generating Errors in Alert Log

    Hie,
    my db is generating errors in the alert log
    Errors in file /export/home/app/oracle/diag/rdbms/ORACLE_SID/ORACLE_SID/trace/ORACLE_SID_j000_15845.trc (incident=44144):
    ORA-00600: internal error code, arguments: [kdsgrp1], [], [], [], [], [], [], [], [], [], [], []
    ORA-00001: unique constraint (SYSMAN.PK_MGMT_JOB_EXECUTION) violated
    DDE: Problem Key 'ORA 600 [13011]' was completely flood controlled (0x4)
    Further messages for this problem key will be suppressed for up to 10 minutes
    looking forward to your assistance
    Mike

    Tue May 22 12:55:56 2012
    Adjusting the default value of parameter parallel_max_servers
    from 960 to 285 due to the value of parameter processes (300)
    Starting ORACLE instance (normal)
    Tue May 22 13:00:16 2012
    Adjusting the default value of parameter parallel_max_servers
    from 960 to 285 due to the value of parameter processes (300)
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Shared memory segment for instance monitoring created
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as /export/home/app/oracle/product/11.2.0/dbhome_1/dbs/arch
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =52
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up:
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options.
    ORACLE_HOME = /export/home/app/oracle/product/11.2.0/dbhome_1
    System name:     SunOS
    Node name:     server_1
    Release:     5.10
    Version:     Generic_141445-09
    Machine:     i86pc

  • Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

    Hi,    We recently started getting these errors a couple times a day.   There are 12 of them in total.     We also have exactly 12 subscriptions.   Does this indicate some db issue causing all of these
    to fail?
    Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
    The following error(s) were encountered:
    Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
    One or more workflows were affected by this.
    Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
    Instance name: Alert Notification Subscription Server
    Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
    Management group: A Company Management Group
    Thanks Lance

    Hi,
    Do you have hotfixes applied?
    http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
    Also, I found a relevant thread for your reference.
    Alert subscription data source module encountered errors while running</u1:p>
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error in executing Database Check on SRM Server (BRCONNECT)

    Dear All,
    When executing the Database check by DB13 or BRTOOLS I am getting the following Error.
    BR0477I Oracle pfile /oracle/FRP/102_64/dbs/initFRP.ora created from spfile /oracle/FRP/102_64/dbs/spfileFRP.ora
    BR1301W Error message from likeywlib:
    ===...could not load SSF library libsapsecu.o .
    BR1301W Error message from likeywlib: likey_init:Couldn't load SAPSECULIB ("libsapsecu.o") using function SsfSupInit (), rc = 1
    BR1302E Initialization of license key library likeywlib failed, return code 1
    BR0602E No valid SAP license found - please contact SAP
    BR0806I End of BRCONNECT processing: cegxjpxo.log2011-10-03 14.02.25
    BR0280I BRCONNECT time stamp: 2011-10-03 14.02.25
    BR0804I BRCONNECT terminated with errors
    I have following profile parameters
    ssl/ssl_lib                           /usr/sap/FRP/SYS/exe/run/libsapcrypto.o
    ssf/ssfapi_lib     /usr/sap/FRP/SYS/exe/run/libsapcrypto.o
    sec/libsapsecu                  /usr/sap/FRP/SYS/exe/run/libsapcrypto.o
    ssf/name                          SAPSECULIB
    I have maintained DIR_LIBRARY as Environment variable with /usr/sap/FRP/SYS/exe/run and all the library files are maintained at above said location including libsapsecu.o which have 777 permission at AIX level.
    Please Helpu2026u2026u2026u2026u2026..
    Regards,
    Manish Sachan

    Thanks, Sunny
    Problem has been solved by the help of your suggested NOTE....................
    Regards,
    Manish Sachan

  • Database Read Error: Please check C:\PRBADDATA.TXT

    Hi experts,
    Anyone of you knows why I am getting the next error Message when I try to log into Primavera through Citrix?. Also, someone could explain to me what is the function of the PRDADDATA.TXT file?
    +-- Error Message --+
    Database Read Error: Please check C:\PRBADDATA.TXT
    -- Application Exception--
    TCVirtualTable.RefreshAppend: TASK: TCCustomVirtualRow.GetValueList: NullRow has not values -> Data saved to c:\PRBADDATA.TXT
    I really appreciate any insight.

    You need to grant the windows user to be able to write the PRBADDATA.TXT in the C drive.

  • Error in DB02

    In DB02 ->Alerts ->Database Check, I have two error message:
    Name..............................Number of message.....Description
    MISSING_INDEX..............2...................................Index: SAPSR3./BIC/B0000406000KE # Table has no index
    MISSING_STATISTICS....32.................................Table: SAPSR3./BIC/B0000414000 # Table or index has no optimizer statistics
    What does it mean? What table is it (BIC/B0000406000KE  and ./BIC/B0000414000)?
    How can I sovle it?

    hello,
    if it is all green. then there must be any other problem. please go through the following links hope it will help you.
    *Missing Index: Process chain Error*
    Sometimes there might be missing indexes in the PW1 environment. This can be checked in transaction DBO2 (Missing Indexes). Sometimes it could be such that the DB statistics were run at a time while the cubes are being loaded and hence the indexes are missing. Hence the first step for such issues is to refresh the data base statistics as shown in the figure. Doing this, updates the database statistics. If this does not solve the issue, go the infocube 'Manage', Performance tab and select 'Repair Indexes (Immediately)'. After this the database statistics need to be updated again via DBO2.If the table for which the index is missing not an infocube, in such a case the index can be created as shown in the first diagram. Highlight the index and select 'Create in DB'.
    Can be recreated via SAP_INFOCUBE_INDEXES_REPAIR
    Some more info:
    Reoccuring missing secondary indexes in BI systems
    http://www.erphome.net/pdf/saezpdf/081saez.pdf

  • Errors appeared in alert log file should send an email

    Hi,
    I have one requirement to do, as i am new dba, i dont know how to do this,
    sendmail is configured on my unix machine, but dont know how to send the errors appeared in alert logfile should send an email to administrator.
    daily, it has to check the errors in alert log file, if any errors occurs(ORA- errors or WARNING errors) should send an email to administrator.
    please help me how to do it

    Hi,
    There are many methods for interrogating the alert log and sending e-mail. Here are my notes:
    http://www.dba-oracle.com/t_alert_log_monitoring_errors.htm
    - PL/SQL or Java with e-mail alert: http://www.dba-village.com/village/dvp_papers.PaperDetails?PaperIdA=2383
    - Shell script - Database independent and on same level as alert log file and e-mail.
    - OEM - Too inflexible for complex alert log analysis rules
    - SQL against the alert log - You can define the alert log file as an external table and detect messages with SQL and then e-mail.
    Because the alert log is a server side flat file and because e-mail is also at the OS-level, I like to use a server side scell script. It's also far more robust then OEM, especially when combining and evaluating multiple alert log events. Jon Emmons has great notes on this:
    http://www.lifeaftercoffee.com/2007/12/04/when-to-use-shell-scripts/
    If you are on Windows, see here:
    http://www.dba-oracle.com/t_windows_alert_log_script.htm
    For UNIX, Linux, Jon Emmons has a great alert log e-mail script.
    Hope this helps . . . .
    Donald K. Burleson
    Oracle Press author

  • Dump error in db02 CONNE_IMPORT_WRONG_COMP_TYPE

    Dear All,
    When use the t-code db02 and press refresh button for database + history check it give abap runtine error dump.
    it gives this error as runtime error:
    CONNE_IMPORT_WRONG_COMP_TYPE.
    please guide me, it is happening both in Devlopment and well as in production server.
    Thanks
    Bhaskar

    Hi,
    check  Note 657981 - CONNE_IMPORT_WRONG_COMP_TYPE in DB02 for RSORAUD1
    also check Note 997535 - DB02: Problems with History Data.
    regards
    kaushal

  • SAP database check finished with warning

    Hello All,
    In sapcheck folder latest .chk file finished with following warnings
    BR0280I BRCONNECT time stamp: 2009-04-01 10.30.50
    BR0972I Checking database operations...
    BR0973W Database operation alert - level: WARNING, operation: cdzsjafp.log, time: 2009-01-17 05.13.45, condition: Last 'log' operation failed with rc = 3
    Kindly help me resolve the issue.
    Regards
    Mohsin

    >
    mohsin m wrote:
    > Hello All,
    >
    > In sapcheck folder latest .chk file finished with following warnings
    >
    > BR0280I BRCONNECT time stamp: 2009-04-01 10.30.50
    > BR0972I Checking database operations...
    > BR0973W Database operation alert - level: WARNING, operation: cdzsjafp.log, time: 2009-01-17 05.13.45, condition: Last 'log' operation failed with rc = 3
    >
    > Kindly help me resolve the issue.
    >
    > Regards
    > Mohsin
    Hello,
    The warning occurs because the database check looks for the logs of all old operations that ended with an error. The text "Last 'log' operation" means: an operation log with the extension ".log"was found for an action that ended with the (error) status RC = 3.
    Since the log referred to is old (January 17), you can get rid of it by running:
    brconnect -u / -c force -f cleanup -m 60
    (60 is the minimum age of the logs to clean up; adapt this value to your requirements)
    Also, it is a good idea to schedule the action "Cleanup logs" periodically via DB13.
    Regards,
    Mark

  • Error in the alert Log

    Hi There,
    Recently I started seeing these errors in the alert log for one of the databases:
    Tue Aug 04 05:05:00 2009
    Errors in file c:\oracle\product\10.2.0\admin\xxxxxx\bdump\xxxxxx_j000_6104.trc:
    ORA-12012: error on auto execute of job 130961
    ORA-27370: job slave failed to launch a job of type EXECUTABLE
    ORA-27300: OS system dependent operation:accessing execution agent failed with status: 109
    ORA-27301: OS failure message: The pipe has been ended.
    ORA-27302: failure occurred at: sjsec 9
    ORA-27303: additional information: The pipe has been ended.
    So, I tried looking at the trace file associated with the error, and here is what I get:
    $ cat ebcd01_j000_6104.trc
    Dump file c:\oracle\product\10.2.0\admin\xxxxxx\bdump\xxxxxx_j000_6104.trc
    Tue Aug 04 05:05:00 2009
    ORACLE V10.2.0.3.0 - Production vsnsta=0
    vsnsql=14 vsnxtr=3
    Oracle Database 10g Release 10.2.0.3.0 - Production
    Windows Server 2003 Version V5.2 Service Pack 1
    CPU : 4 - type 586, 2 Physical Cores
    Process Affinity : 0x00000000
    Memory (Avail/Total): Ph:1095M/4095M, Ph+PgF:7747M/12110M, VA:1367M/2047M
    Instance name: ebcd01
    Redo thread mounted by this instance: 1
    Oracle process number: 53
    Windows thread id: 6104, image: ORACLE.EXE (J000)
    *** ACTION NAME:(DEL_ARCH_EBCP01) 2009-08-04 05:05:00.191
    *** MODULE NAME:(DBMS_SCHEDULER) 2009-08-04 05:05:00.191
    *** SERVICE NAME:(SYS$USERS) 2009-08-04 05:05:00.191
    *** SESSION ID:(871.15642) 2009-08-04 05:05:00.191
    *** 2009-08-04 05:05:00.191
    ORA-12012: error on auto execute of job 130961
    ORA-27370: job slave failed to launch a job of type EXECUTABLE
    ORA-27300: OS system dependent operation:accessing execution agent failed with status: 109
    ORA-27301: OS failure message: The pipe has been ended.
    ORA-27302: failure occurred at: sjsec 9
    ORA-27303: additional information: The pipe has been ended.
    I'm not sure what job is causing this as there is no reference and also not sure how to resolve this issue!! How can I properly trace back these errors? Any ideas or tips to what should I do?
    I'm running 10.2.0.3 database on windows 2003 server.
    Thanks

    I found the problem.. the executable job was referring to a none existing batch file..
    I have refreshed the database from production some time ago and the jobs I have setup are referring to production scripts and paths (which we didnt have on dev)..
    This is now resolved.
    Thanks

Maybe you are looking for

  • Missing topics in pdf-document

    Hello, I am using RH 7 and creating WebHelp. I am also trying to create a pdf-document with the same content as the WebHelp. For some reason, the contents I specify for the pdf-document are only partly included in the pdf-document. I use the TOC from

  • Zen Micro freezing on connect

    Hi I just bought my Zen Micro today and had no problems with it at first. I charged it until it was fully charged and then plugged it into my computer. It was detected by the computer and everything seemed to be working well. I ran Media Explorer and

  • Work flow for release of PO

    HI, I am doing customization settings for work flow for release of PO (Task customizing over view). If the PO created Auto mail should go to the releaser. I configured as below. 1)     I assigned Agent in Task customizing over view. 2)     If I go to

  • App Crash..Sorry long post but need help

    I installed lightroom 3.4.1 ( trial version) on my Windows (Vista 64 bit) laptop and it worked like a charm for two days. Now when I start it I get "lightroom-Opening Catalog: DSCxxxxx.JPG.lrcat" and the "windows" window with 'Adobe Photoshop lightro

  • Please help. Color Crashes on "Send to FCP" or export XML

    This error has just started happening and it's driving me nuts. I'm using FCS3 and I've got all the latest updates. I'm grading 60 sec commercials (source is XDCAM EX HD 1080p and I'm rendering in Pro Res HQ 1080) I did 3 this morning with no probs.