Database EM not working

hi EveryBody...
i am unable to connect to the Oracle Database using Enterprise managaer in 10g,
when i am writing
http://172.20.262.27:1158/em
it is throwing The page cannot be displayed output
using Oracle 10g Release 2 on Hp-itanium
please Help me out in this
Many thanks

Hi
Thanks for the Reply
The database is running ...
The listener listening for the database & dbconsole started & Able to Connect the Database from Sql*plus lcoally & Remotely from Client side too..
Dbconsle status
oracle@orclrpt: /app/oracle/product/10.2/bin #
oracle@orclrpt: /app/oracle/product/10.2/bin # ./emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://orclrpt:5500/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Thanks again

Similar Messages

After upgrading ACS 3.3.1 to 4.2 on windows the local database is not working

Hi,
I have upgaded the ACS 3.3.1 for windows server to 4.2. Everything went fine but the local database is not working.
The CD is an upgrade kit from 3.x to 4.2 on windows. I tried to install directly the 4.2 I was able to install but integration with AD/LDAp is not working. Anysay its an upgrade kit so I cant expect it shoud work when install drectly the 4.2 but by upgrading from 3.3 to 4.2 everything should work fine.
I followed the upgradation path as recomended.
Also we have a requirment that once it is upgraded to 4.2 we need to shift the whole thing from the physical server to a virtual machine on VMware ESX server 3.5.
Can anybody pls guide me if anything else to do after the upgradation.
Thanks & Regards
Sachi

Hi Javier,
First of all I was facing a problem of restoring the old database of 3.3 to 4.2. Somehow I overcame that issue by following the below steps. Now local authentication is working fine but AD/other External database authentication is not working. As you told the setting for the unknown users are configured to fetch the credentials from the external database if it is not in the local database.
Do we need to do anything in the AD itself?
Regards
Sachi
Steps for ACS upgrade to 4.2 version
Below are the requested steps mentioned for the up gradation from ACS 3.3.2 to ACS 4.2.
        1)     Take a configuration backup from existing ACS. ACS--->System
configuration----> ACS Backup
2)    now if you have ACS 3.3.2 on server. take backup of the ACS
3)   Insert the cd or if you have the set up on the system then Run the setup of ACS 3.3.4. During the process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
4)     Once you are at 3.3.4, take a backup and keep it handy.
5)     Run the setup of 4.1.1. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.1 upgrade.
6)Once you are at 4.1.1.24 take a backup and keep it handy.
7)     Run the setup of 4.2. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.2 upgrade.
8)     Once you are at 4.2 take a backup and keep it handy. Now run the
patch 12 and take a backup again.
9)     Now fresh install 4.2 on your new production server and install patch
12. Restore the 4.2 patch 12 backup and you should be all set.

Oracle 10g database homepage not working?

Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

I had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck

XML Query works on one database and not working on others with errLPX-00241

I have one query as below
SELECT EXTRACTVALUE
(VALUE (xml_node),
'/inspectionActivityArtifact/ns2:landfillTypes/ns2:type[position()=1]',
'xmlns:ns2="http://dwm.sw.xmlNamespace/InspectionActivity"'
) AS TEST
FROM artifacts a,TABLE (XMLSEQUENCE ((XMLTYPE (NVL (artifact_data, '<empty></empty>'))))) xml_node
this works well on other databases but not working on one database. Everything is same configuration and OS and everything.
I can work on other XML parsing which is working fine but not this query.
Any idea ?
Viral Dave

post versions and patch levels for both databases eg 10.2.0.1.0 and the error message you are getting.

Query on database column not working

Hi
i have a block which has around 40 columns.the block is based on a table which has more than 20000 records.When i try 2 make query on a Database column in Enter-Query mode its not working.It fetching all the records instead of the respective records
THe block property is said to yes
i have even set the query allowed,only propery of the column to YEs
Can any one help me out of this??? do i need to set any other property???

Thanks a lot for james and THomas and to all. The error is that i have missed the bracket for OR in my where condition ...Now im able to query all the columns.
Thanks very much...
I have one more doubt .i have a requirement in which when the user goes to the child block and makes a query is it possible to bring the associates parent records..wht code or trigger we need to rite ?
normally we do for parent block when we query we populate the child. is this can be done?

Database Mail not working with SQL Server Agent

I'm running SQL Server 2005 Standard edition 64 bit with SP2 on a 64 bit machine.
Database mail does not work with SQL Server Agent. When I configure SQL Server Agent to use database mail the test email button is greyed out and inactive therefore I cannot send emails using operators or for jub success failure etc.
I've read that there was supposed to be a fix for this with SP1 but I have SP2 and still receive the same problem. Please can somebody help as I do not wish to use SQL Mail as a work around due to this becomming redundant in future versions of SQL Server.
Kind Regards

The problems solved
steps:
1)we create a mail profile at at Managment->Database Mail ,of SQL Managment
2)we set this account as "default" at Managment->Database Mail -> Configure Database Mail -> Manage profile security
3)At tab "Alert System" of SQL Server Agent properties , we check the "Enable mail profile" , Mail System=Database Mail, Mail profile = "the profile we already create"
4)we create a new operator at "Operators" of sql agent, where at "notification options" -> "Email name" we put the mail where we want to sent the agent the mails at failured job
5)We go at a specific job, at tab "Notifications" ,we check the "email" check box and then we choose the operator we just create, at the text box next to check box.
I hope not to forget something
Thank You all for the help

Database Diff not working using 3.1 - 64 bit

Hi there,
I have just tried using the utility Database Diff in 3.1 on windows 64-bit and this does not produce any differences between 2 similar schemas. I have just downloaded 3.1 32-bit (Java included) and this works fine. I am running Windows 7 64bit.
Any ideas?
Regards,
VicC

I have managed to sort this out, I was trying to speed up the startup of SQL Developer and disabled some of the extensions. The crucial one here is Versioning support. This must be enabled for Database Diff to work.
Regards,
VicC

After Logon on Database Trigger Not Working From Client Terminal

Hi Every One
I Have a Problem, I'am Using Oracle 10g R2, I'd Written After Logon on Database Trigger, I'd Written The Trigger Under The Under The User With DBA Privileges, and it is work Fine, but it is work only when i Logon On The Database from The Server Terminal with any user, and If Logon From any Other Terminal It Is Not Work,
Can any One Know The Reason, Please Help me
Yasser Mokhtar

Please post the trigger code.

EM Database Express not working in RAC installation

I installed the Oracle 12cRAC , Standard editon ,version : Oracle Database 12c Release 12.1.0.1.0 - 64bit Production edition in Windows 2008 64 Bit .
Instance and RAC database is working fine is both host. After installation of the database (DBCA), it EM database express URL shows as
https://apph1.xxxx.com:5500/em
If i run the URL, it is not working.
Following are the output of the command:
SQL> SELECT 'https://'||SYS_CONTEXT('USERENV','SERVER_HOST')||'.'||SYS_CONTEXT('USERENV','DB_DOMAIN')||':'||dbms_xdb_config.gethttpsport()||'/em/' from dual;
5500
SQL> SELECT 'https://'||SYS_CONTEXT('USERENV','SERVER_HOST')||':'||dbms_xdb_config.gethttpsport()||'/em/' from dual;
0
SQL> select dbms_xdb_config.gethttpsport() from dual;
https://apph1:5500/em/
SQL> select dbms_xdb_config.gethttpport() from dual;
https://apph1:5500/em/
But still EM express not open in the broser.
I am not sure, how to check the listenr in RAC.
C:\>srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): apph1,apph2
How enable the EM Express in RAC?
Regards
Mathew

Dear All,
I set HTTP port manually
SQL> exec dbms_xdb_config.sethttpport(8080);
Now EM express working on http.
Regards
Mathew

Updating database table - not working

Hi ,
My database table 1 is having multiple data for a primary key
example :
table 1:
GLOBMATNR -> Primary key
WERKS --> non primary key -- multiple for globmatnr
MBLNR --> non primary key -- multiple for globmatnr
MBLPO--> non primary key --
BUKRS --> non primary key -- multiple for globmatnr
i m using below statement to make entry into the table.. but this insert is not working.. I stead of putting 30 entries its just inserting 1 entry..
Can any one help me in this..?
INSERT table1 FROM TABLE internal_table ACCEPTING DUPLICATE KEYS.
Edited by: neha gupta on Oct 29, 2010 1:25 PM

Hi,
Hit F1 on ACCEPTING DUPLICATE KEYS. You will identify why it is inserting 1 line only. I hope the table is a custom table. For fields which can have multiple values, make it primary key.
In your example table, GLOBMATNR, WERKS, MBLNR could be primary keys if WERKS is in one company code only. If not add BUKRS also
Hope it helps
Sujay

Database link not working properly

I have to link to another database...I have created an entry in my TNS names on the oracle server and have used the following script to create the link:
CREATE PUBLIC DATABASE LINK DATA
CONNECT TO USERNAME IDENTIFIED BY PASSWORD
USING 'DATA';
Data is the name of the database sid, and I am able to connect to the server using the username/password@sid in sqlplus. Oracle tells me that the link is created successfully, however if I try to describe user_tables@data I get the following error:
SQL> desc user_tables@data;
ERROR:
ORA-02085: database link DATA connects to DATA.WORLD
Please help!
Jes

You will see this error when the global name of the remote database does not match what you have in your link. Although the link name might match the SID, the fully qualified link name does not.
You can either:
1) Set the GLOBAL_NAMES parameter to FALSE in the database in which you have created the database link.
2) Recreate the link so that the full link matches the global name of the remote db (query GLOBAL_NAME in the remote db if you don't know it)
Good luck!

OTN Oracle Database Downloads Not Working

After agrgeeing to the T&C's none of the download links work.
See this page for example:
http://otn.oracle.com/software/products/oracle9i/htdocs/linuxsoft.html
Specific Download not working:
http://download.oracle.com/otn/linux/oracle9i/9202/ship_9202_ia64_lnx_Disk1.cpio.gz
Regards,
Andrew

Seems to be fine. Try this link instead: http://otn.oracle.com/software/htdocs/devlic.html?http://download-west.oracle.com/otn/linux/oracle9i/9202/ship_9202_ia64_lnx_Disk1.cpio.gz
OTN Team

Database connection not working in Crystal Reports for Eclipse 2.0

Hello All,
We have several hunderd reports that were created in CR 8.5. We are moving to a new Java environemnt and we are also considering using BIRT.However to save development time and effort we are considering using the CR for Eclipse 2.0. For a proof of concept, we loaded several of our 8.5 reports into Crystal reports XI, saved them, and then loaded them into our CR for eclipse design environment.
These reports were built from the values returned from a store procedure.. When we try to execute the reports from within Eclipse, we get Error finding JNDI name (xxxx). We have created the appropriate datasource (to Sybase 12.5.4), and the schema is viewable in the db explorer. However when we associate the connection to this datasource, the connection no longer appears in the field explorer and no data is returned upon previewing the report.
The original reports used ODBC to access the database. Is there anyway to easily convert these reports to using the Sybase JDBC datasource? Also in the DB explorer, the SPs are only showing the SP parameters,not the return values, so we are unable to easily drag the return fields onto the report to reset the links.
Thanks in advance
Edited by: Michael Knight on Oct 7, 2009 1:46 PM

Michael,
We had a similar situation but from my reseach the output from the stored procs cannot be viewed in the report designer in Eclipse. So we had to design the reports using the Crystal Reports Devloper application (the stand-alone version, not the Eclipse editor). The reports were designed w/an ODBC datasource. In order to get that working we had to create a JNDI JDBC datasource connection w/the exact same name as the ODBC datasource and that works. For example, the ODBC datasource was named OP01DSDB01.WORLD so we just created a JNDI datasource w/that exact same name (no jdbc/OP01DSDB01.WORLD just OP01DSDB01.WORLD). I'm not sure if there is a workaround for any of this but this was the easiest way to get them working.
I know this isn't the ideal situation, but that was the easiest way to get things working.

URGENT: Java stored procedure on oracle 92 database is not working

Hi,
I am having an issue regarding java stored procedures. I have created a java class that uses the bouncycastleprovider ( bcprov-jdk13-141.jar ) to encrypt strings. I tested against the version of the java virtual machine that comes bundled with oracle and it works perfectly. I then used JDeveloper to load the class on the database with the resolve, noverify and order flags checked and it shows no errors but when I try to execute the stored procedure it throws the following exception:
java.lang.ExceptionInInitializerError:
java.lang.SecurityException: Cannot set up certs for trusted CAs: java.net.MalformedURLException: no protocol: US_export_policy.jar
at javax.crypto.SunJCE_b.<clinit>(DashoA6275)
at javax.crypto.Cipher.a(DashoA6275)
at javax.crypto.Cipher.getInstance(DashoA6275)
at RijndaelEnhanced.encrypt(RijndaelEnhanced.java:57)
at RijndaelEnhanced.encrypt(RijndaelEnhanced.java:73)
I loaded jce1_2_2.jar, sunjce_provider.jar, bcprov-jdk13-141.jar. Also replaced the US_export_policy.jar, local_policy.jar with the unrestrictive version. I add the security provider dinamically with a call to Security.insertProviderAt(new org.bouncycastle.jce.provider.BouncyCastleProvider(), 2);
I also did a select on the user_objects table and all the classes are in VALID status.
When I run my application using the java virtual machine that is located under C:\Oracle\oracli9i\jdk\jre\bin directory it works fine but when I try to execute on the database it won't work. I found a bug that was if the jce1_2_1.jar file existed in the C:\Oracle\oracli9i\jdk\jre\lib\ext directory ( even if it's extension is renamed ) it won't work because the certification file had expired but I don't know if this has anything to do with this error.
Am I missing something?
Please I need an urgent solution to this problem.
Thanks in advance.
Bruno Oliveira

SomeoneElse wrote:
Waaaaahhhhhhh!I was just thinking the same thing.... ya beat me to it...
To the OP:
As an up and coming DB Developer who now works for a small tech firm straight outta college, I can tell you for sure that you will definitely not get anywhere in your impatient life... look behind your back you miserable dude, your job might be in danger since ya got a bad attitude AND you can't figure out an error you are getting from a Java SP. So instead of helping you, I am going to simply tell you how you SHOULD act in a community of practice.
1. Be nice when looking for help
2. BE NICE WHEN LOOKING FOR HELP!!!
Pretty simple right?
Know what else is really simple? Looking at the topics of each board to make sure ya post in the right board! You people disgust me; somehow getting by in your professional career acting the way you do. I sure hope your "online" persona isn't a reflection of your real attitude towards people, almost pathetic and extremely immature.
Sorry bout the rant, it is Friday, I know :) Didn't get my coffee this morning. Have a good one all!
-Tim

Selecting a one row from the database is not working

Hi all I am having a small problem with getting a row from my database to show up. Here is the code for the search that I want to do
String item; String columnName; String result; columnName = (String)searchBox.getSelectedItem(); item = searchField.getText().trim(); String tableName = "employee"; if(item == null || item.equals("")){ System.out.println("No Text entered"); }else{ try { result = sql.retrieve_From_Database(columnName, tableName, item); System.out.println(result); } catch (SQLException e1) { sql.displayErrors(e1); }
Here is the code for the retrieve_From_Database function.
protected String retrieve_From_Database(String columnName, String tableName, String item) throws SQLException{ ResultSet rs = null; Statement sm = null; sm = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY); rs = sm.executeQuery("select * from " + tableName + " where " + columnName + " = " + item); result = rs.getString(columnName); if(result == null){ System.out.println("Error in retrieve"); return new String("No results in DB"); }else{ System.out.println(result); return result; } }
When I run the first code I get an error of SQL Exception: Unknown column 'anthony' in 'where clause'. But yet when I run the query of
Select * from employee where FirstName = 'anthony'
within the mysql commandline I get the proper result. So my question is why when running this in the command line do I get the proper result but when running the code I do not?

jo**** wrote:
Hi. The problem is clear in the original post. The OP is trying to use PreparedStatement
parameters to fill out general portions of the SQL query, instead of only data values.
He is hoping to put in a column name. That will never work. Only data values are settable.
HTH,
Joe WeinsteinActually, no. There's no PreparedStatement there at all. It appears that his problem is that, while the working query entered directly in the client is
Select * from employee where FirstName = 'anthony'the query he's constructing in his code is
Select * from employee where FirstName = anthonySince there are no quotes around anthony, it's treated as a column name.
If he had properly used PreparedStatment as suggested in reply 1, that would not be an issue. My guess, however, is that when he claims he's using PS, it's as Tolls suggested a couple of posts ago--he's simply replacing the Statement with a PreparedStatement, but not using the parameters as suggested.
The wrong thing for OP to do at this point is see my above comment about the quotes and explicitly add them in the query string. The right thing to do, of course, is to actually use PS's parameters.
Edited by: jverd on Oct 11, 2010 10:08 AM

Database filter not working in Powershell command

I'm trying to run a powershell query to find what users have a retention policy applied to them. However, I'm also trying to filter out a database that contains service accounts, which should be excluded. The issue I'm running into is that the database filter
doesn't seem to be working. if I use "database -ne mydb" I get all accounts, including from that db. If I use "database -eq mydb" I get zero results. I can see on the MS doc about filterable properties that this is one of them that should
work with get-mailbox.
http://technet.microsoft.com/en-us/library/bb738155(v=exchg.150).aspx
Can anybody point me towards what I have wrong in this command:
Get-Mailbox -ResultSize unlimited -Filter {(ManagedFolderMailboxPolicy -eq $null) -and (database -ne "Service Accounts - DAG")} | fl name,database
I'm running exchange 2010 but I can't seem to find the right forum for that, is it in the archives somewhere?
Thanks in advance,
Joel

Belinda,
Thanks for the reply. I probably didn't write my end goal as clearly as I should have. I am aware of the meaning of eq and ne and I have them applied properly. I'm trying to find everyone who does not have any ManagedFolderMailboxPolicy and who is not in
the service account DB. That syntax isn't my issue. What is my issue is that the database filter simply isn't getting applied properly. Let me give you another example.
If I write Get-Mailbox -Database 'Service Accounts - DAG' I return only the users from that DB.
If I write Get-Mailbox -Filter {database -eq 'Service Accounts - DAG'} I get zero results.
If I write Get-Mailbox -Filter {database -ne 'Service Accounts - DAG'} I get every user in my organization, including the ones in the service accounts DB, which I just tried to filter out.
I thought perhaps I had misspelled the actual name of the property or of the database so I did a Get-Mailbox for a single user and then "cut/paste" the proper fields into my commands. So it appears that somehow the name of the DB is causing it fail when
it's in the Filter section, even though that same syntax works when I use it as it's own switch.
I would be happy to find a different way to write this. Since I know it works when I use the -Database command, I could just do that and then pipe it to the rest of the command. The issue I have though is that I have a couple dozen DBs and I only want
to filter out 1 so I would much rather use a "not equal" command.

Database EM not working

Similar Messages

Maybe you are looking for