Database needs to be bounced every three weeks

I am a consultant (OCP DBA) on-site with a client.
The problem they are having is that after about 2-3 weeks of up time their Oracle 9.2.0.2.1 running on Server 2000 SP2, on more than adequate hardware, slows down to a creeping speed, when they bounce it, it runs fine again for a couple of weeks.
I have checked everything I can think of, but the install is identical to other installs I have around the country that often have 6 months or more between re-starts without any problems.
It has occurred to me that Upgrading the Windows SP would be a good idea, but that kind of downtime would only be available on weekends.
When it is in the slowed down state, it writes a lot of trace files, they do not contain good error messages but rather just a whole bounce of Cursor statements.
Sound familiar to anyone? I'd appreciate the help!
Ola Kvalvaag
LIMSLeap LLC
[email protected]

hi ola,
this is the portal content management forum. for your database question please use the database forums:
http://forums.oracle.com/forums/index.jsp?cat=18
thanks,
christian

Similar Messages

  • When I put an appointment into my iphone calendar it will not let me repeat the same appt. every three weeks.  How do I get it to set it every three weeks?

    I cannot repeat an appt every three weeks.  What to do?

    I believe there are also other calendar apps available in the App Store that will give you more repeating options. I'd browse through that section of the store.

  • Every three weeks I can't get e mail error says wrong password what is happening?

    WWhy can't I get e mail every so often - an error message says my password is wrong and I change it but does no good?

    I am assuming  you are referring to your @verizon.net address, since you didn't specify. There is a help page for setting up your client located here that includes a video link if you would find that more helpful.
    For the sake of example, we are going to pretend that we are setting up  fictional account "[email protected]" and the password for logging into that  account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
    The settings for using Verizon's servers would be:
    Incoming Server: incoming.verizon.net
    Server Requires Authentication: Yes
    Username: fakeacct
    Password: fakepassword
    Requires a secure connection (SSL): No
    Port: 110
    Outgoing Server: outgoing.verizon.net
    Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
    Requires a secure connection (SSL): No
    Port: 25 (although 587 also works.)
    These settings should work unless you have a Verizon/Yahoo account, in which case the server names are: incoming.yahoo.verizon.net  -and-  outgoing.yahoo.verizon.net
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Need to display days for every "X" weeks

    I have start and end dates, along with specific days of the week that I'm outputting.
    However, I need to display them every "X" week but I'm not sure how to do that.
    For example: show Monday, Wednesday, and Friday for every 2 weeks (or every 3, 4,5 weeks).
    Can someone shed some light?
    TIA

    Another option, depending on what you are really trying to do.
    Loop from day A to day B.
    If current itteration of the day is a designated day of the week [dayOfWeek(currentDay)] do one thing, else do another.
    If current itteration of the day is the end of the week [I.E. dayOfWeek(currentDay) is 7] then break the display to a new week.
    There are probably other ways to do this as well.  The date time functions could probably give you some ideas.
    http://livedocs.adobe.com/coldfusion/8/htmldocs/functions-pt0_05.html#1098968

  • Problem with published cal:repeating event Thu, Fri, Sat, Sun every 3 weeks

    I have an event that repeats thursday, Friday, Saturday and Sunday every three weeks. I can set it up by changing my week to start on Monday. It is correct in iCal and on me.com.
    Subscribers to the calendar however see the calendar wrong. They see a repeating event every Sunday, Thursday, Friday and Saturday.
    So for this week I see the event on 7/15, 7/16, 7/17, 7/18/10.
    But subscribers see it on 7/11, 7/15, 7/16, 7/17/10. So Sunday is always wrong.
    Any idea how to fix this? It used to work prior to either 10.6.4 or iOS 4 or iPhone 4 screwed up my calendars. I’ve restored them but this is the only thing still broken.
    Thanks!

    Greetings,
    Any idea how to fix this? It used to work prior to either 10.6.4 or iOS 4 or iPhone 4 screwed up my calendars. I’ve restored them but this is the only thing still broken.
    Updates do not inherently break calendars. They can uncover pre-existing data corruption in a database which is why issues can be triggered by updates. Think of an update as getting your car washed. If the car's paint is already chipped or flaking, paint is going to come off when it goes through the wash. I'm glad you had backups and were able to restore your calendars.
    To try and resolve your issue:
    __First make an iCal backup, File > Export > Archive.
    __Un-publish the calendar.
    __Export the calendar holding this recurring event as an ICS file: File > Export > Export.
    __Delete the calendar in question from iCal
    __Remove the following to the trash and restart your computer:
    Home > Library > Caches
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    __NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    __Once the computer is restarted, double-click the ICS you exported to re-add it.
    __Re-publish the calendar
    If the issue persists at this point, I would delete this recurring event and re-create it as it's entry in the iCal database may be damaged.
    Hope that helps.

  • Make particular Ical calendar on three week with different work hours...

    Hello,
    I work in shifts on three shifts per month and I'd like it to appear in a calendar for information to plan my appointments in advance, I do not know how to do this automatically for example
    I shall desire to have a timetable as follows:
    Week 1 schedule worked 7:00 to 3:00 p.m.
    Week 2 schedule worked 8:00 to 5:00 p.m.
    Week 3 schedule worked 3:00 p.m. to 10:00 p.m.
    How to put this up in my mac (I have a mobile subscription with me and two iphones shynchronisation calendars) and it is repeated every three weeks.
    Thank you in advance for your help.
    Sincerely,
    Francois

    Did you mean you need help with the repeat variables?
    If so, you should be able to create an event with a time range, and go into custom repeat. Set it repeats weekly, every three weeks, while selecting the days of the week that are included in the repeat. If you have something different every day, of course you need to create a unique event for each by selecting only one day in the week dialogue that pops up for custom repeats.
    Copy and paste that event like a template for everything on the three week cycle that you need to add.

  • ARD 3.2 Deletes passwords every 3 weeks

    ARD has been deleting the saved usernames and passwords about every three weeks without me doing anything- it just does it by itself. I then have to reenter the names and pw's for every machine. I have tried resetting the keychain password for ARD and I'll see how that works, but any other suggestions would be really helpful. Thanks!

    Is this on a machine that others have access to? The only thing that should cause what you describe, is resetting the ARD password.

  • Job Schedule Custom ABAP Class Every 2 weeks

    Hi Folks,
    I would like to ask if  possible to run custom ABAP class using JOB Schedule (SM36). I have created a custom class that needs to be run every two weeks.
    Thanks,
    Robert

    Hi,
    what do you mean by "run custom class"? If you mean calling methods of that class then no. But it is easy to write a simple report which will call required methods.
    Cheers

  • I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

    I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

    try general>settings>reset>reset all settings and start up as an new phone.

  • Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.

    Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.I restore it and then it works for a while, but then a couple weeks later I'll plug it in and I get the same message again. It's very frustrating because even though I have all the settings to save to cloud, my apps and data don't all come back.

    Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

  • I have registered Adobe CS, and every two/three weeks i get a message that I am using a trial version.  I provide my registration key, and the fun starts over in two/three weeks.  What is going on?

    I have registered Adobe CS, and every two/three weeks i get a message that I am using a trial version.  I provide my registration key, and the fun starts over in two/three weeks.  What is going on?

    I'm not sure what's happening. See if you can get some help from Web Chat here:
    Serial number and activation support

  • We have been loyal Verizon customers for about six years and need someone to investigate the amount of stress we have been put through by them in the last two or three weeks!HELP!Who do we go to?

    We have been loyal Verizon customers for about six years and need someone to investigate the amount of stress we have been put through by them in the last two or three weeks!HELP!Who do we go to?

    What problem are you having with your service or device? (Removed)
    Message edited as required by the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

  • MRP, need to split total order in three week

    Hi SAP GURU,
    i need to split total order in three weeks. how i can make setting so that after MRP execution system will create proposals like 1st week302nd week 303rd week 40
    Thanks,
    SAP PQ

    Dear
    Goto MD61-Enter Material -Goto User Parameters -Select Weekly (W) -Enter Weekly bucket qty in case u have PIR as your demand
    In case if you have Sales Order oriented qty then you can use Scheduling agreement kind of forecasting in VA31  instea of MD61  or Yo can try Period Lot Size WB in Material master and logging Sales Order qty .
    Check both cases in sandbox and look at MD04 result
    regards
    JH

  • Continuation: need data grouped for every week

    SELECT * FROM aetnah_file_emp_cust_hist
    WHERE pctl_employee_seqnum= 133774This query returns too many rows.
    Now my requirement is that I need to get the most recent contrib_amt from this table for every week based on date column CTL_INS_DTTM.
    This column CTL_INS_DTTM stores data about when a row wass inserted into this table.
    pctl_employee_seqnum CTL_INS_DTTM(MM/DD/YYYY) contrib_amt
    133774 01/01/2009 100
    133774 01/02/2009 200
    133774 01/03/2009 300
    133774 01/04/2009 400
    133774 01/05/2009 500
    133774 01/06/2009
    133774 01/07/2009 700
    133774 01/08/2009 800
    133774 01/10/2009 900
    133774 01/12/2009 1000
    133774 01/13/2009 1100
    133774 01/14/2009 1200
    I will need 52 columns (1 year = 52 weeks) totally and the most recent data for each week.
    Ex:
    Desired output:
    01/07/2009 01/14/2009 01/21/2009 01/28/2009
    700 1200 NULL 200
    SELECT pctl_employee_seqnum, CTL_INS_DTTM, contrib_amt
      FROM (
              SELECT pctl_employee_seqnum, CTL_INS_DTTM, contrib_amt, ROW_NUMBER() OVER(PARTITION BY TO_CHAR(CTL_INS_DTTM, 'WMONYYYY')ORDER BY CTL_INS_DTTM DESC) RNO
                FROM aetnah_file_emp_cust_hist
               WHERE pctl_employee_seqnum= 133774
    WHERE rno = 1This code above is doing that but I need to transpose this row wise data into column wise as mentioned on Desired output.
    Total # of columns:52
    Apologize for opening a new thread.....please help on this transpose issue
    Thank You All

    Hi,
    TO_CHAR (ctl_ins_dttm, 'WMONYYYY') will result in 59 or 60 groups per year, since all months (except February in common years) have (incomplete) 5th weeks.
    If you want 52 equal-sized groups, then TO_CHAR (ctl_ins_dttm, 'WWYYYY') will get you closer. (You'll still have an incomplete week 53.)
    To pivot those rows into one column, you can do something like:
    SELECT  MAX (CASE WHEN TO_CHAR (ctl_ins_dttm, 'WW') = '01' THEN contrib_amt END)   AS week_01
    ,       MAX (CASE WHEN TO_CHAR (ctl_ins_dttm, 'WW') = '02' THEN contrib_amt END)   AS week_02
    ,       MAX (CASE WHEN TO_CHAR (ctl_ins_dttm, 'WW') = '03' THEN contrib_amt END)   AS week_03
    ,       ...If you want data (like "01/07/2009") as the columns headers, then you'll have to use dynamic SQL.

  • Mac Mini 2010 (0sx 10.7.4) unable to access iTunes Store in three weeks

    Hi there,
    I have read and tried virtually EVERYTHING I could find via the net including Apple's own problem solving solutions regarding the fact that my Mac Mini (late 2010) running Osx 10.7.4 simply cannot not access the iTunes store... AT ALL "iTunes could not connect to the iTunes Store. The host is down. Make sure your network connecvtion is active and try again" blah blah yes yes). Every other use of the internet works brilliantly on it.
    It has now been THREE WEEKS... waiting and trying a myriad of solutions proposed by discussion groups and professionals (incl Apple), HOWEVER... as it stands, I have use an old G5 PowerPC Tower when I need to do anything invloving the iTunes Store, which is sad as I really would like to pass it on as a gift. SO, I have a brand new OS that is pretty much useless for Apple's own products (do you want our $$ spent in your store or not) and the two iPhones, the old G5, the old PowerMac Lappy and an even older Mac Lappy all happily connect to iTunes BUT it seems this new OS "Lion" (like the Wizard of OZ character... lacks the "courage" to actually do it's job.
    I have rebuilt networks, prefs, used terminal, deleted prefs, changed Apple Id, password, ports, etc etc etc etc... I don't think there is one solution I haven't tried ALL I can say is... ***???  Thank god I do know enough about Mac systems to get around, I would hate to be my mother or grandparents or a newbie. As it is iTunes is useless (now just a fancy MP3 player. Does ANYONE know something I haven't tried? Or is this mac mini... simply a fancy apple tv that can't actually access anything Apple...)      Cheers

    Welcome to AD!
    +Using Proxy: Yes+
    +HTTP Proxy: gateway.fasoffice.com:80+
    Disable that proxy server in IE settings and see if you can connect.

Maybe you are looking for

  • Problem with sound in LG S5200

    HI, i am trying to port a game to LGS5200 handset , the problem is that the game sounds doesnt work in it. My game works fine for Nokia handsets. What changes shud i make? i am using nokia s40 as reference build. And i tried changing the sound format

  • What about the Mac OS 9.2 from Mac OS X

    Do you think I can install Mac OS 9.2 directly from the second Mac OSX CD on a PowerBook 3400c with 2gb HD and 80MB of RAM? I'm asking because my friend got rid of his Mac and gave me his Mac OS X CD's and since, I know I can't install X on my machin

  • New pc suite

    dont know if im behind time or ahead but there is a new pc suite version available V6.4

  • JPanel not displaying in Windows

    I have a window displaying a panel and some buttons. I installed the application on Solaris and Windows. On Solaris, it displays fine every time. On Widows, it displays the first time I bring up the application but the panel does not display when I c

  • Change colors of entire row according to another

    Just to keep you guys busy: I have a crosstab layout and I want to change the color of the entire row according to one column, is that possible??