Database settings in SQL server

Hi,
Please provide SAP's recommendations for Database Settings when upgarding to BPC 7
1.Compatibility Level. Should it be (80) or (100)?
Compatibility Level of 80 = SQL 2000
Compatibility Level of 90 = SQL 2005
Compatibility Level of 100 = SQL 2008
2. Recovery Model (Simple or Full)
Thanks.
Raghu

Hi Raghu,
For 7.0
SQL Server 2000 is not supported
Compatibility Level of 90 = SQL 2005 if you are using SQL Server 2005
Compatibility Level of 100 = SQL 2008 if you are using SQL Server 2008
Recovery Model
It is depending by the disaster recovery model which customer would like to implement.
If for the customer lossing data for last 24 hours is an accepted then you can use SINGLE
If for the customer the data lost can be in maximum X hours (X< 24) then you have to use FULL.(and you have to implement
the backup maintenance plan according with this requirement).
Regards
Sorin Radulescu

Similar Messages

SAP and Database Encrption on SQL Server 2005 or 2008

Hi. I searched as best I could for any existing threads on this topic, and could not find any, so I hope it's OK to raise a new one.
We're running SAP ECC 6.0 on a SQL 2005 database. Database size is around 3.3 TB, with Trans Log of about 550GB, storage is HP EVA.
I've been asked to report on how Database Encryption would impact our systems, both from the perspective of enabling it initially and then how it would affect performance going forward.
I've read a few White Papers, for example:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
.. and from what I'm reading, it looks like I would want to be moving to SQL Server 2008 as a first step. Does anyone have any experience of implementing SQL encryption for a SAP database, either in 2K5 or 2K8?
All comments or help will be welcomed.
Thanks
Steven Clark

Hello Steven,
You can also check the following websites:
http://blogs.msdn.com/b/saponsqlserver/archive/2011/09/05/decreased-disk-space-requirement-for-sap-unicode-systems.aspx
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50c5de8f-282a-2e10-cb8a-a5859a0994a4&overridelayout=true
And, SAP notes:
[1581700 PAGE compression support for DDIC & Hom./Het. System Copy|http://service.sap.com/sap/support/notes/1581700]
[1488135 Database compression for SQL Server|http://service.sap.com/sap/support/notes/1488135]
Regards,
Eduardo Rezende

Problem with "Database Gateway for SQL Server"

Hello,
i am testing the different technologies for connecting an oracle database with a sql-server database.
The way using 10g-generic-connectivity with ODBC works fine, but the 11g-DG4MSQL makes problems.
Environment:
Server PEGASUS (32bit Windows Server 2003 R2 SP2) with Oracle Database 10g Release 10.2.0.4.0
Server OBELIXUS (32bit Windows 2000 Sp4) with MS-SQL-Server 2005
On PEGASUS i have installed the gateway in a new oracle home directory:
"D:\oracle\product\10.2.0\db_1" => home directory of 10g
"D:\oracle\product\11.1.0\tg_1\" => home directory of the gateway
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
MSSQLDG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DG4MSQL)
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MSSQLTEST)
(HS = OK)
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
D:\oracle\product\11.1.0\tg_1\dg4msql\admin\initDG4MSQL.ora:
HS_FDS_CONNECT_INFO=OBELIXUS/MSSQLSERVER/testuju
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
D:\oracle\product\10.2.0\db_1\hs\admin\initMSSQLTEST.ora:
HS_FDS_CONNECT_INFO=DSN_MSSQL
HS_FDS_TRACE_LEVEL=OFF
HS_LANGUAGE=AMERICAN_AMERICA.WE8MSWIN1252
HS_FDS_FETCH_ROWS=100
HS_RPC_FETCH_REBLOCKING=OFF
How mentioned above, the access from oracle to sqlserver using MSSQL(10g hsodbc.exe) works fine.
But when trying to acces the sqlserver using MSSQLDG (11g dg4msql.exe) I get the following error:
ORA-28500: Verbindung von ORACLE zu Fremdsystem gab diese Nachricht zurück:
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.
[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).
[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
ORA-02063: vorherige 2 lines von DBL_MSSQL4
Here the contect of the file "DG4MSQL_agt_2332.trc":
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
HOSGIP returned value of "RECOVER" for HS_FDS_RECOVERY_ACCOUNT
HOSGIP returned a value for HS_FDS_RECOVERY_PWD
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "DG4MSQL"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.1.0.6.0_0006, Instance:DG4MSQL
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2008/08/22-16:17:42
RC=-1 from HOSGIP for "PATH"
PATH from environment is "d:\oracle\product\11.1.0\tg_1\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Programme\IBM\Informix\Client-SDK\bin"
Exiting hgolofn, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2008/08/22-16:17:43
Entered hgolgon at 2008/08/22-16:17:43
reco:0, name:testuju, tflag:0
Entered hgosuec at 2008/08/22-16:17:43
uencoding=UTF16
Entered shgosuec at 2008/08/22-16:17:43
Exiting shgosuec, rc=0 at 2008/08/22-16:17:43
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using testuju as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2008/08/22-16:17:43
HS_FDS_CONNECT_INFO = "OBELIXUS/MSSQLSERVER/testuju"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2008/08/22-16:17:43
dsn:OBELIXUS/MSSQLSERVER/testuju, name:testuju
optn:
Entered shgogohn at 2008/08/22-16:17:43
ohn is 'OraGtw11g_home1'
Exiting shgogohn, rc=0 at 2008/08/22-16:17:43
Entered hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
##>Connect Parameters (len=223)<##
## DRIVER=Oracle 11g dg4msql-OraGtw11g_home1;
## SERVER=OBELIXUS\MSSQLSERVER;
## Database=testuju;
#! UID=testuju;
#! PWD=*
## AnsiNPW=Yes;
## QuotedId=Yes;
## IANAAppCodePage=2252;
## ArraySize=100;
## PadVarbinary=0;
## SupportNumericPrecisionGreaterThan38=1;
Exiting hgogenconstr, rc=0 at 2008/08/22-16:17:44
Entered hgopoer at 2008/08/22-16:18:00
hgopoer, line 159: got native error 14 and sqlstate 08001; message follows...
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
Exiting hgopoer, rc=0 at 2008/08/22-16:18:00
hgocont, line 1890: calling SqlDriverConnect got sqlstate 08001
Exiting hgocont, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgocont.c LINE:1910 ID:Something other than invalid authorization
Exiting hgolgon, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgolgon.c LINE:612 ID:Calling hgocont
Entered hgoexit at 2008/08/22-16:18:00
Exiting hgoexit, rc=0 at 2008/08/22-16:18:00
Many thanks in advance for any help!
Regards Hartmut

At first your configuration is not really correct.
=====================================================
In the LISTENER.ORA from 10g, you must only refer to the database and hsodbc 10g
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
===========================================================
Then you have to create a new listener (new name) in the gateway oracle_home on a different port than instance database:
D:\oracle\product\11.1.0\tg_1\network\admin\listener.ora
SID_LIST_LISTENERGTW =
(SID_LIST =
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENERGTW=
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1522))
To start it, use the command below:
D:\oracle\product\11.1.0\tg_1\bin\LSNRCTL start listenergtw
===========================================================
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
match the DG4MSQL with the listener on 1522 port
HSODBC match with binary10g on listener 1521 port
MSSQLDG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1522))
(CONNECT_DATA =(SERVICE_NAME = DG4MSQL))
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =(SERVICE_NAME = MSSQLTEST))
(HS = OK)
Try to configure and let me know your feedback
regards,
Mireille

Run Reporting services 2005 with databases housed on SQL Server 2012?

Hi, I have a RS 2005 install in which the ReportServer and ReportServerTempDB databases reside on a different SQL Server 2005 server. I am planning to upgrade DB server to 2012 and would like to keep SSRS as 2005.As a second phase I will upgrade SSRS2005
to SSRS 2008. So I would be running something like this:
Server A: SQL 2005 Reporting Services
Server B: SQL 2012 database engine - housing ReportServer and ReportServerTempDB
Is this configuration supported?

Hello,
According to the
BOL, Report Server service checks the database version at startup. If the report server is connected to a database that is an earlier version, the report server will update the database during startup.If you have a newer report server database, you
cannot use it with an earlier version of a report server instances.
In that case, the earlier versions of SQL Server Database Engine that can be used to host the SSRS report server databases. For example, In SQL Server 2005 Reporting Services, we can use either SQL Server 2000 or SQL Server 2005 to host the databases, for
SSRS 2012, we can use SQL Server 2012,2008 R2,2008,2005.
Based on my test, In the Reporting Services 2005 Configure Manager, we can create a new database on a remote SQL Server 2012 database engine and the Initialization is successful.
In this way, the databases are created from the script file which installed with the Reporting Services instance, you can find the Catalog.sql and CatalogTempDB.sql under folder C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer.
However, when upgrade the existing ReportServer database and ReportServerTempDB database on the SQL Server 2012 by restore from a backup, we cannot use this existing database for Reporting Services 2005 and get the following message:
The database version (162) does not match your reporting serivces installation.And the initialization failed.
In your case, you can host the ReportServer database and ReportServerTempDB database of SSRS 2005 on SQL Server 2012 database enginer by create a new database from Reporting Services 2005 Configure Manager. But you cannot use the existing
database which upgrade to SQL Server 2012.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Lync 2013 Enabling Cross-Database Access in SQL Server

Hello,
I want to know when Enabling Cross-Database Access in SQL Server will be enabled for Lync Server 2013.
Will Lync Server enable it by default?
Stmart

DCOM Errors are awful. Here's a few articles that I've read before that match your error. Some you've likely already seen...
http://d1it.wordpress.com/2013/10/28/dcom-move-lync-user/
http://blogs.technet.com/b/dodeitte/archive/2010/12/19/issue-when-moving-legacy-users-to-a-lync-server-2010-pool-using-hlb.aspx
http://www.networksteve.com/windows/topic.php/Unable_to_Move_users_between_2_Lync_Pools/?TopicId=61736&Posts=2
http://www.bibble-it.com/2011/03/22/unable-to-move-lync-user-dcom-error
Using the -force command as Saleesh noted should work, but will kill your contacts. If it's just a few users that are acting up, you can restore the contacts from backup for these users (export-csuserdata before you start).
Is it all users, or just a handful?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Add multiple users to a certain database in the SQL server in one go

I wonder if there is any method to add multiple users to a certain database in the SQL server in one go and without using transact code.
I can add a single user to a certain database “Q” for example by right click on the user “U1” for example then properties then in user mapping tab select
the database “Q”, so there should be a method to add multiple users ( U1,U2,U3…) to this database?
Best Regards,
Ahmad

Many thanks Visakh16,
I can do this using the below script, but what I am searching for is do to this without any scripting.
USE TestDatabase; --Make sure you have the right database
DECLARE @sql VARCHAR(MAX) = '';
SELECT @sql = @sql + 'CREATE USER ' + name + ' FOR LOGIN ' + name + ';
' +
'GRANT CREATE TABLE, CREATE PROCEDURE, CREATE VIEW, VIEW DEFINITION TO ' + name + ';
FROM sys.server_principals p
WHERE p.type in ('S','U') -- SQL Logins and Windows Login. Do not change!
and p.name in ('U1','U2','U3'); -- List of names to add. alter to suit
PRINT @sql; -- Show the statements being executed in the messages pane
EXEC(@sql); -- Run the statements that have been built
Thanks,
Ahmad

Oracle 11G Linux ( Oracle Database Gateway for SQL Server 11.1.0.6.0. )

Hi,
I am tring Gateway for SQL Server ..
I want to Select Oracle Database Gateway for SQL Server 11.1.0.6.0 at the time of installation, but It is not coming in the Avaliable Components List..
Is there any prerequisite for SQL server ?
Any Help please ?

Are you following the "Step Through the Oracle Universal Installer" section under
http://download.oracle.com/docs/cd/B28359_01/gateways.111/b31043/sqlserver.htm#CCHEDECC
?

Cannot connect to database master at SQL server at SERVERNAME

I have installed SQL 2008 R2 in a fresh win 2008 R2. I’m running the sharepoint configuration Wizard using the database server name with the correct domain
credentials but I get the following error message. “Cannot connect to database master at SQL server at
SERVERNAME. The database might not exist, or the current user does not have permission to connect”
I‘m able to login to the new SQL server using the “SQL server management studio” with no problems. I used the sa account and a domain account.
The sharepoint server is also a new installation. And both servers have the firewall disabled.
Thanks in advance for your help.
Simon

Hi,
What is your SharePoint server’s version?
Please make sure you use the farm admin account to launch SharePoint configuration wizard. If not, please log in with this account, then check the effect.
In addition, check if you create a named instance, such as, servername\sharepoint, however, you only specify the servername in the configuration wizard. If this is
the case, change to servername\sharepoint, then check the effect.
Thanks,
Rock Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Regards, Rock Wang Microsoft Online Community Support

Migrate oracle database to Microsoft sql server 2005

Hi All,
I have to migrate production oracle database to Microsoft sql server 2005. Below are the details:
Oracle database version: 8.1.7.4
Platform : Aix
Kindly help me out

Well, the traditional way would be to dump out all your data from Oracle tables as comma delimited flat files and import into SQL server. Plenty of examples online, like this is one by Mark Powell: http://www.jlcomp.demon.co.uk/faq/flatfile.html
Or if you have the budget you could think about buying a data mapping tool like File-Aid
As mentioned by another poster, you will still need to figure out how to replace all your triggers, stored procedures, etc on your new platform of course.

OLTP and OLAP databases on same SQL Server?

Would you put OLTP and OLAP databases on same SQL Server or separate?
I realize the ideal would be separate, but that means 2 expensive licenses instead of 1. Most of our OLTP stuff happens during the day while OLTP processing happens at night (so good use of resources) if just 1 server. Also, the disks that hold
the files could have different allocations (small chunks for the OLTP disks, large for the OLAP disks). Also, by being on the same database server, the OLTP data is immediately accessible for processing into the warehouse.
Or, is it just a cardinal rule to never mix the two worlds as server completely different purposes?
Thanks.

Answer given in simillar below thread would help you for sure:
MSDN Forum:
Is keeping your OLAP and OLTP databases on the same server is considered bad practice?
-Vaibhav Chaudhari

Steps to change universe database connection from SQL server to Oracle 10

Hi,
we are moving from sql server to Oracle 10.Please let me know the steps and various parameters I should consider while changing universe database connection from SQL server to Oracle 10.
Following are the steps which I assumed :
1.     create a new Oracle database connection or edit the existing connection to point to Oracle server
2.     Need to check sql for each object, having integrity check for universe will solve the purpose of parsing each object
3.     Exporting the universe after integrity check
4.     Report data testing
Let me know if I miss on any steps.Also what all factors I need to consider while moving to Oracle for eg: what @ custom sql,what @ table names,what @ LOV etc.
Kindly reply

Thanks Abhijeet and Shreyash,
I will follow the steps you have suggested.
Actually I was searching for this on net and got to know that with Oracle database connection,theres lot of stuff needs to take care of in terms of custom sql and LOV and in our case,we have lot of custom sql for each object in the universe so just wanted to confirm.
I will do the changes and let you guys know in case theres any isuue specifically to Oracle.

Database link to SQL Server Init error

Hi all,
i´m tryng to create a dblink between Oracle 10.2.0 in a RHEL4 and a SQL Server.
I can connect using isql but when i try using sqlplus i obtain this error:
SQL> CREATE DATABASE LINK dbl
CONNECT TO "user"
IDENTIFIED BY "pwd"
USING 'hsodbc'; 2 3 4
Enlace con la base de datos creado.
SQL> SELECT * FROM Table_1@dbl;
SELECT * FROM Table_1@dbl
ERROR en línea 1:
ORA-28545: error diagnosticado por Net8 al conectar a un agente (error in Net8 while connecting an agent)
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: 2 lines precediendo a DBL
This is the error explanantion in Oracle Docs:
I think the problem is the ini file inithsodbc.ora.
inithsodbc.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
# AAB - Parametros para asociar un agente ODBC al HS
HS_FDS_CONNECT_INFO = MSQLS
HS_FDS_TRACE_LEVEL = ON
HS_FDS_SHAREABLE_NAME =/usr/local/freetds/lib/libtdsodbc.so
HS_AUTOREGISTER = true
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
listener.ora
# listener.ora Network Configuration File: /app/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = STA2)
(ORACLE_HOME = /app/oracle/oracle/product/10.2.0/db_1)
     (SID_DESC = (SID_NAME=hsodbc)
(ORACLE_HOME=/app/oracle/oracle/product/10.2.0/db_1)
(PROGRAM=hsodbc)
                         (ENVS=LD_LIBRARY_PATH=/app/oracle/oracle/product/10.2.0/db_1/lib:/usr/local/lib)
LISTENER =
     (DESCRIPTION =
     (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
tnsnames.ora
# tnsnames.ora Network Configuration File: /app/oracle/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEVSTA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = devSTA)
STA2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = STA2)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
STA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = STA)
#AAB - Descripcion de servicio para conectar con SQLServer
HSODBC = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)
(HOST=nemesisgr2.hi.inet)
(PORT=1521)
(CONNECT_DATA = (SID=hsodbc)
(HS = OK)
ODBC Files
odbc.ini
[ODBC Data Sources]
MSQLS = Microsoft SQL Server
[MSQLS]
Driver = /usr/local/freetds/lib/libtdsodbc.so
Description = Microsoft SQL Server
Trace = No
Servername = sqlserver
Database = master
[Default]
Driver = /usr/local/freetds/lib/libtdsodbc.so
odbcinst.ini
[PostgreSQL]
Description          = ODBC for PostgreSQL
Driver          = /usr/lib/libodbcpsql.so
Setup          = /usr/lib/libodbcpsqlS.so
FileUsage          = 1
[MSQLSDRIVER]
Description          = Driver for MS SQL Server
Driver          = /usr/local/freetds/lib/libtdsodbc.so
Setup          = /usr/lib64/libtdsS.so
FileUsage          = 1
UsageCount          = 5
freetds.conf
# $Id: freetds.conf,v 1.12 2007/12/25 06:02:36 jklowden Exp $
# This file is installed by FreeTDS if no file by the same
# name is found in the installation directory.
# For information about the layout of this file and its settings,
# see the freetds.conf manpage "man freetds.conf".
# Global settings are overridden by those in a database
# server specific section
[global]
# TDS protocol version
;     tds version = 4.2
     # Whether to write a TDSDUMP file for diagnostic purposes
     # (setting this to /tmp is insecure on a multi-user system)
;     dump file = /tmp/freetds.log
;     debug flags = 0xffff
     # Command and connection timeouts
;     timeout = 10
;     connect timeout = 10
     # If you get out-of-memory errors, it may mean that your client
     # is trying to allocate a huge buffer for a TEXT field.
     # Try setting 'text size' to a more reasonable limit
     text size = 64512
# A typical Sybase server
[egServer50]
     host = symachine.domain.com
     port = 5000
     tds version = 5.0
# A typical Microsoft server
[egServer70]
     host = ntmachine.domain.com
     port = 1433
     tds version = 7.0
# Test MS SQl Server
[sqlserver]
     Database = master
     host = pruebas.hi.inet
     port = 1433
     tds version = 7.0
Any ideas??
Thanks in advance.
Alex

I have changed the inithsodbc.ora file including:
HS_FDS_SHAREABLE_NAME =/usr/lib/libodbc.so (I have ODBC installed)
Here you are the other information:
lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 23-OCT-2008 09:29:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Bienvenido a LSNRCTL, escriba "help" para obtener información.
LSNRCTL> status
Conectándose a (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=nemesisgr2.hi.inet)(PORT=1521)))
ESTADO del LISTENER
Alias LISTENER
Versión TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Fecha de Inicio 22-OCT-2008 19:31:34
Tiempo Actividad 0 días 13 hr. 58 min. 29 seg.
Nivel de Rastreo off
Seguridad ON: Local OS Authentication
SNMP OFF
Parámetros del Listener /app/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log del Listener /app/oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Recibiendo Resumen de Puntos Finales...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nemesisgr2)(PORT=1521)))
Resumen de Servicios...
El servicio "STA" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2" tiene 2 instancia(s).
La instancia "STA2", con estado UNKNOWN, tiene 1 manejador(es) para este servicio...
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2XDB" tiene 1 instancia(s).
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2_XPT" tiene 1 instancia(s).
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STAXDB" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA_XPT" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "hsodbc" tiene 1 instancia(s).
La instancia "hsodbc", con estado UNKNOWN, tiene 1 manejador(es) para este servicio...
El comando ha terminado correctamente
LSNRCTL>
hsodbc
There is no output executing this command.
[oracle@nemesisgr2 ~]$ /app/oracle/oracle/product/10.2.0/db_1/bin/hsodbc
[oracle@nemesisgr2 ~]$
tnsping hsodbc
[oracle@nemesisgr2 ~]$ tnsping hsodbc
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 23-OCT-2008 09:35:58
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Archivos de parámetros utilizados:
/app/oracle/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Adaptador TNSNAMES utilizado para resolver el alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp) (HOST=nemesisgr2.hi.inet) (PORT=1521)) (CONNECT_DATA = (SID=hsodbc)) (HS = OK))
Realizado correctamente (40 mseg)
Rgds,
Alex

Assigning database roles on SQL Server db

I am trying to set up a SQL Server adapter (not a database table adapter for SQL tables) to manage role assignment on a database 'test1' on my sql server ( 2000) 'sqlserver1' using IdM 7.1. I am trying to assign role1 to user tuser1 on test1. I am using 'sa' account so permissions should not be an issue.
Per resource reference document, I mapped:
userNametest1 <-> userNametest1
rolestest1 <-> rolestest1
My login for user 'tuser1' gets created on the SQL server. However the database and role assignment is not happening. I do not get any errors in the IdM admin pages from where I am testing this. Hence I am assuming I am not setting something right in the resource schema. I have tried different ways such as
userNametest1 <->userName
rolestest1 <-> roles
and some more combination but none seem to work. How can i find out what my resource attribute mapping should be? If anyone has done this, can you please share how you got it work?
Thanks in advance.

Some more info.
I have set up the out of the box MS SQL server adapter to connect to MSDE version of SQL server running on my local machine. I used the MSSQLServer Form provided in the samples folder and assigned it to an admin user and turned on the trace.
I am able to create logins by assigning the resource to a user. Using the admin user I am able to see in the trace that the server Roles are also being retrieved fine. What I am not able to get is assigning a database to the user and then assigning db roles.
Following the documentation (Resource Reference guide for IdM 7.1) I have created following attributes on the left hand side of schema.
defaultDB,serverRoles,domain, userNameMyTestDb,rolesMyTestDb.
No matter what I map the last two attribute I am not able to assign a db and dbroles to a user. I turned on sql profiler and then again used the admin user to view a test user using MSSqlServer form and it appears that the procedure sp_databases is not being called at all. I have decompiled the sql server class file and it appears there might be an issue with the way list of databases is being retrieved.
Has any one seen this before? If you were able to get it to work, can you please give me information on the resource schema and any other settings you had to make to get it to work?
Thanks in advance.

Convert Existing MDB database files to SQL Server Express

Hi All,
Can some one please help me on this:
1) What is the current version of SQL Server Express?
2) HOw much SQL Server Express costs (figure about 500 branch servers)
3)Are there any Tools from Microsoft to convert Access 97 directly to SQL Server express, and how much do they cost?
4)Server Hardware requirements to run SQL Server Express - disk size, memory size, security settings, pre-requisite, service needed.
5)Maximum capacity / capabilities of SQL Server Express-max # of simultaneous users,tables,rows,database size.
6)Any installation instruction for SQL Server Express.
Thanks in Advance, Pls help
Thanks
Tony

Hi Tony,
Besides Bruce’s post, firstly, SQL Server Express is a free SQL Server edition,
you can download SQL Server 2014 Express directly from
this link and install it on your computer. For how to install SQL Server 2014 Express, please follow the steps in this similar
blog.
Secondly, for more information about hardware and software requirements for Installing SQL Server 2014 Express, please review this article:
https://msdn.microsoft.com/en-us/library/ms143506.aspx .
Thirdly, SQL Server Express has the following limitations:
• 1 physical processor
• 1 GB of RAM
• 4 GB database size per database in SQL Server 2005 Express and SQL Server 2008 Express , 10 GB database size per database in SQL Server 2008 R2 Express and higher versions of SQL Server Express.
However, there is no limit to the numbers of databases in SQL Server Express. And there is no technical limit to the number of connection that SQL Express can handle.
In addition, there are several methods to convert an Access database to SQL Server, such as using
SQL Server Import and Export Wizard and
SQL Server Migration Assistant for Access, they are both free tools. For more information about convert an Access database to SQL Server, please review this
KB article.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Creating a database link to SQL server

Hi All,
How can I create a database link from Oracle9i Enterprise Edition Release 9.2.0.1.0 DB to MS SQL Server database.
Thanking You
Regards Lakmal

It depends on your requirements.
You can use either Generic Connectivity or Transparent Gateways.
More information can be found here:
http://www.oracle.com/technology/products/gateways/index.html

Database settings in SQL server

Similar Messages

Maybe you are looking for