Database Studio under Vista

Hi,
I am having trouble starting Database Studio under Windows Vista. Eclipse starts, and displays a dialog saying "Check default user management..." then comes up with an error "Recreation default user management failed".
Is there any way round this problem?
Thanks
Lewis

Yes, I also tried uninstalling everything and installing again with the same result.
Lewis

Similar Messages

Late 2008 MacBook Pro unibody - Hard Freezes under Vista 32bit

Hi folks,
I am a relatively new Mac fan (started a few years ago when I purchased a Mac Mini for home because I didn't want to suffer Windows at home as well as at work!)
Anyhoo, late last year I purchased a MacBook Pro Unibody jobbie so that I could have the best of both worlds for my work. I can run Visual Studio under Vista for C++ development under boot-camp and run the Mac and OSX for just about everything else.
However: I have a problem that is testing my patience to brand new levels. In summary:
About once every couple of hours or so (and it's not reliable: could be after 30 seconds, could last several hours) Vista freezes. And I mean freeze: it takes a "hold the power button down" routine to get out of it. This, of course, has made Vista and lots of my work pretty upset. There's nothing quite like writing to a file when this happens for maximum tears. I'm running through tissues like you'd never believe
I have done some research on this over the months and have tried many possible solutions including, but not limited to, ensuring that I'm fully patched up and that there is no suspicious software, updating all the drivers (paying particular attention to NVIDIA's ones - as a DirectX/OpenGL programmer for the past 10 years I'm acutely aware of how touchy they are). None of these have worked.
The closest I've come to something that looks like a solution is this thingie called Riva Tuner; but it does not recognise the April 2009 NVIDIA drivers.
I understand that it could be linked with something NVIDIA's drivers do to speed up/slow down the cards depending on load/heat/whatever.
I'm so far down my tether at this point I really do not know where to turn. I love my MacBook, but I need Bootcamp and Vista to do my job. It was my choice to get a Mac rather than a PC, so I guess it's my own fault. I have seen many other users on the Internet who have the same problem but none of them appears to have a fool-proof resolution to this issue.
Thus, I thought I'd come here, get my best begging trousers on and grovel to Apple and to the learned users here to see if there is something that I can do to get everything working again so that I can continue to bask in the MacBook Pro glory knowing that my Vista installation is reliable.
Grovelling over,
Mr Cuttle.
Message was edited by: Mr Cuttle

Do you have anything against running Windows in a VM (virtual machine) under OSX to do your work? On the unibody, this is much more stable than boot camp in my experience.
here are the steps I took
1) install smcfancontrol in OSX
http://www.eidac.de/
2) install virtualbox free virtualization software from Sun Microsystems
http://download.virtualbox.org/virtualbox/2.2.2/VirtualBox-2.2.2-46594-OSX.dmg
3) install Windows using virtualbox like normal; use smcfancontrol to bump fan speeds if it runs hot (normally not needed unless you watch video or game).
4) turn on seamless mode and run your windows apps side by side with OSX apps for free.
if you have issues setting it up, read here:
http://www.virtualbox.org/manual/UserManual.html
this video shows how it works, albeit with a weird Japanese game app instead of Visual C++
http://www.youtube.com/watch?v=Z47MKa9Jdwk
and this screenshot that I took shows just how much you can do with this:
http://img505.imageshack.us/img505/5916/picture1zdk.png

Error while opening database studio in maxdb

Hi Experts,
I am having maxdb 7.8 and database studio AP MaxDB Database Studio,Version: 7.8.02.21,Build: 021-121-242-175
but when i am tying to open database studio it through
error message " problems opening perspective 'com.sap.sdb.ui.perspectives.mainperspective '
i was though it is coming due to old version of java then i have upgrade with 1.7 but problem is still there.
so please help me .....
Thanks
Naresh KK.

Hi Naresh,
Basically MAXDB Database studio 7.8 requires JRE 1.6. You can do the following
Uninstall the Database Studio version.
1. To uninstall, call the installation manager 7.8 ("Programs -> SAP MaxDB -> Installation Manager").
2. Choose "Remove MaxDB Installation".
3. Under "Legacy", select the Database Studio version.
Selecting "Legacy" ensures that you do not select the Database Studio 7.8 that you have just installed for uninstallation.
4. Choose "Forward" to confirm that you want the system to remove the installation.
Due to the operation of the earlier Database Studio version, some processes may still run (for example, serv.exe). Stop these processes and continue with the 7.8 installation.
And then install JRE 1.6. Then delete the files in location c:\Users\<User>\sdb\DatabaseStudio (delete files .configuration, .metadata, p2) and then re-install MaxDB database studio.
Regards,
Deepak Kori

The server principal "XYuser" is not able to access the database "Ydb" under the current security context

SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

This appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

Duplicate files appearing in Windows Photo Gallery under Vista Home Basic.

I am suffering a bout of duplications in my Windows Photo Gallery under Vista. I am getting duplicates, triplicates and quadruple versions of the original file.
Despite turning off all Autoplay media types to 'No Action', I get random duplicates when I try to enter update pictures from camera or memory chip through a USB port. There is no 'Enter Updates Only' option, and Microsoft says that this is unnecessary as
duplication is prevented. The duplicates however appear with 'copy' in the file name after the image numbering system. My preference is to view the memory contents via 'Computer' - select and open the port, and view, then copy and paste into Photo
Gallery. Photo Gallery kicks in to view the chip correctly, but often/always (?) promptly uploads uncommanded. It did not used to do this, only in the last year or two.
What do I do, it is driving me crazy ?

Hi,
As I know, for Duplicate issue, it might be caused by a corrupted database, please try to rebuild it as a test.
Close Windows Photo Gallery
First show hidden files.Navigate to C:\Users\Usename\AppData\Local\Microsoft\Windows Live Photo GalleryRename “Pictures.pd” to “Pictures.pd.old” (without quotes) and reopen Windows Photo Gallery.
Yolanda Zhu
TechNet Community Support

Secure Web.Show_Document with forms10.1.2.3 under vista Need authentication

Hi All
I installed forms 10.1.2.3 successfully under Windows Vista , i use Java Bean described in the OTN Forms document titled "Oracle Forms Services - Secure Web.Show_Document calls to Oracle Reports" ,but when the form calls the report, the following error message :
"REP-51018: Need database user authentication" is presented to the user.
note : I did this before successfully with forms 10.1.2.0.2 under windows xp
What is wrong with me please under Vista ?
Note :The Java console give this :
Java Plug-in 1.5.0_12
Using JRE version 1.5.0_12 Java HotSpot(TM) Client VM
User home directory = C:\Users\crizma1
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading proxy configuration from Internet Explorer ...
network: Done.
network: Loading direct proxy configuration ...
network: Done.
network: Proxy Configuration: No proxy
basic: Cache is enabled
basic: Location: C:\Users\crizma1\AppData\LocalLow\Sun\Java\Deployment\cache\javapi\v1.0
basic: Maximum size: unlimited
basic: Compression level: 0
basic: Plugin modality.register
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
basic: Registered modality listener
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@e34726, refcount=1
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@7be8c2
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@e34726, refcount=2
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@e34726, refcount=1
network: Connecting http://mostafa:8889/forms/java/frmall.jar with proxy=DIRECT
basic: Loading http://mostafa:8889/forms/java/frmall.jar from cache
basic: Reading cached JAR file from JRE 1.5 release
basic: Certificates for http://mostafa:8889/forms/java/frmall.jar is read from JAR cache
security: Loading Root CA certificates from C:\PROGRA~1\Java\JRE15~2.0_1\lib\security\cacerts
security: Loaded Root CA certificates from C:\PROGRA~1\Java\JRE15~2.0_1\lib\security\cacerts
security: Loading Deployment certificates from C:\Users\crizma1\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
security: Loaded Deployment certificates from C:\Users\crizma1\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer ROOT certificate store
security: Loaded certificates from Internet Explorer ROOT certificate store
security: Loading certificates from Internet Explorer TrustedPublisher certificate store
security: Loaded certificates from Internet Explorer TrustedPublisher certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/splash.gif
basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/oracle_logo.gif
basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/bgnd.gif
network: Connecting http://mostafa:8889/forms/java/oracle/forms/registry/Registry.dat with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/java/oracle/forms/registry/default.dat with proxy=DIRECT
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
network: Connecting http://mostafa:8889/forms/frmservlet?form=d:%5CFEMTOSOFT%5CACC%5Cmainmenu&separateframe=true&acceptLanguage=ar-eg&ifcmd=startsession with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011?ifcmd=getinfo&ifhost=Mostafa&ifip=192.168.1.2 with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/java/frmrwinteg.jar with proxy=DIRECT
java.io.FileNotFoundException: http://mostafa:8889/forms/java/frmrwinteg.jar
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.isUpToDate(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.loadFromCache(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.load(Unknown Source)
     at sun.plugin.cache.JarCache.get(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
     at sun.misc.URLClassPath$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getResource(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.util.ResourceBundle.loadBundle(Unknown Source)
     at java.util.ResourceBundle.findBundle(Unknown Source)
     at java.util.ResourceBundle.getBundleImpl(Unknown Source)
     at java.util.ResourceBundle.getBundle(Unknown Source)
     at oracle.forms.registry.MessageManager.getMessage(Unknown Source)
     at oracle.forms.registry.MessageManager.getMessage(Unknown Source)
     at oracle.forms.engine.Runform.createInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
basic: WARNING: error reading http://mostafa:8889/forms/java/frmrwinteg.jar from cache.
basic: httpCompression = true
basic: Downloading http://mostafa:8889/forms/java/frmrwinteg.jar to cache
basic: encoding = null for http://mostafa:8889/forms/java/frmrwinteg.jar
network: Connecting http://mostafa:8889/forms/java/myappicons.jar with proxy=DIRECT
basic: Loading http://mostafa:8889/forms/java/myappicons.jar from cache
basic: No certificate info, this is unsigned JAR file.
network: Connecting http://mostafa:8889/forms/java/oracle/forms/engine/RunformBundle_ar_EG.class with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/java/oracle/forms/engine/RunformBundle_ar_EG.properties with proxy=DIRECT
إصدار بريمج Forms هو : 10.1.2.3
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
basic: Loaded image: jar:http://mostafa:8889/forms/java/frmall.jar!/oracle/forms/icons/frame.gif
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
network: Connecting http://mostafa:8889/forms/lservlet;jsessionid=0125fc1e6334c60e076ddfdd063a1d231270ff1507db8a2efc0666273e237011 with proxy=DIRECT
Edited by: Mostafa Abolaynain on Jun 18, 2009 7:50 PM

If I am remembering correctly, some changes were necessary in order to make this work with 10.1.2.3. So, if you are using the old jar which you used in previous versions, I would recommend obtaining the one specifically updated for 10.1.2.3. Refer back to the OTN page which has the download and choose the link that references the new version:
http://www.oracle.com/technology/products/forms/techlisting10gR2.html
Be sure to clear the client Jar cache before re-testing. This is not the same as the browser cache.

Light Room Under Vista 1.3.1

Hello, I purchased lightroom back in 4/07 with hopes of eventually getting a new computer around christmas.
So around christmas I got my new computer and moved my copy of LightRoom from an XP machine to a Vista Home Premium Machine. Quad core 6600 2.4GHz 3GB Memory and 512MB Nvida 8800GT Graphics card. It seemed to run okay at first but then when I updated from 1.0 to 1.3.1 it got to were it barely runs. It can take upto 5 hours for it to import 25 10MP raw files from a card to DNG format, creating standard previews. about 20minutes ago I clicked auto tone for a photo still waiting 20 minutes later for the new render of the file.
I have tried disabling the AERO Feature, I have tired deleting and recreating the preference file.
On Adobe's website it shows it is windows vista compatible, but now that I click on there tech support site is shows they don't guarantee it to work under vista.
Then I read under the knowledge base that NVIDA Display Manger software creates a know issue with this. So they stat I should remove it. I am not sure if I have the version the reference as it is not called the same. But serves the same function and comes from NVIDA. It just seems kind of silly I buy a new computer with 2 22" monitors to work on photographs. Buy the software that is suppose to be great only to read in the knowledge base they recommend that you remove dual monitor support from your computer to get things to run. This really seems odd considering they tout my other software photoshop and its ability to use multiple monitors. Hence the reason I upgraded my machine in the first place.
Any help anyone can give it getting on the path to once again being able to use lightroom would be great.

Hello Breezez,
I think there must be something else going on on your computer, the dual monitor support should be no problem. I use Lightroom under Vista on a less powerfull machine with Aero switched on, dual screens and DNG files and have no problem whatsoever. I use an ATI Radeon X800 Pro video adapter, not exatly the most up to date video card for that matter. My database contains more the 7000 photographs, most af them DNGs. I would be surprised if the slow speed had anything to do with using two screens. It sounds as if some other process is eating processor capacity. Checking for updates for your video card, BIOS and chipset drivers seems good advice to me. Try switching off the antivirus program (temporarily of course!). There might be a resource conflict.
Hans

Can we install oracle 10g database on Windows Vista Home Edition?

Can we install oracle 10g database on Windows Vista Home Edition?

You didn't specify which Oracle10 Edition.
In the case of SE/SE one/EE, with a paid license Supported has a mean impact on production environments with paid licenses, since you wouldn't run on an unsupported platform facing the risk of being left without technical support from Oracle in case of an emerging issue.
For the XE Edition, this is not a certified combination, since the only certified editions are the Business, Enterprise, and the Ultimate editions, but you can try it, you don't have nothing to loose, supported, certified vs. unsupported in this case makes no difference since this XE is not supported either way (no patchsets, no bug fixes, no technical support from metalink), just an AS IS free software.
On the license agreement terms displayed when you download the XE software it states:
"No Technical Support
Our technical support organization will not provide technical support, phone support, or updates to you for the programs licensed under this agreement."
and
"THE PROGRAMS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. WE FURTHER DISCLAIM ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."
In case someone would be able to win a trial against oracle due to damage from the use of this software, the amount paid at maximum is 1,000.00 USD, not enough to even pay the lawyer's lunches.
For the XE users the primary source of 'kind of support' is the oracle forums, either the installation forum, the general database or the specialized XE forum.
Of course if this is for your own personal use for learning and testing and there are no third parties you could damage by doing this and if you don't have a paid license for this installation you may try it, but don't expect the Enterprise Manager to behave as defined by the manual, most of it won't work since the Home Edition doesn't have the privileges required for EM to work.
If this is your personal computer and when you bought it the computer provider installed from factory Home Edition, and if you want something to work there, you can try to install a Virtual Machine and install Oracle 10g on a supported guest OS.
~ Madrid

Problem with database-Studio

Hello
We use MaxDB for our SAP Systems and for our own applications(none SAP)
We upgradet our none-SAP Database from 7.7 to 7.8.02.21.
Then we tried the new Database Studio.
With problems!?
We have a schema BWALLE and a user BWPROGI.
When connecting to the database with SQL-Studio as BWPROGI we can see the schema BWALLE and all our tables.
When connecting to the database with Database Studio as BWPROGI we can't see the schema BWALLE and we can't see our tables??!!
We see 2 users BWPROGI and DBABW(the administrator).
Under BWPROGI there are no schemas!??
Under DBABW there are schemas(dbabw,domain,sysinfo) and all the tables/views belonging to these schemas.
What do we miss???
Why can we access our tables/views/indexes with SQL-Studio and not with Database-Studio.
Any help welcomed
Regards
Albert
Edited by: Albert Beermann on Nov 23, 2011 10:45 AM
Some more informations:
We have a group BWALLE nouser BWALLE.
The owner of the Schema BWALLE is the group.
The user BWPROGI is member of the Group BWALLE.
When connecting with SQL Studio as BWPROGI we see the schema BWALLE and all tables in the schema.
When connecting with MAXDB Maestro as BWPROGI we see the schema BWALLE and all tables.
When connecting with Database Studio as BWPROGI we can't see the schema BWALLE and don't see any table.
Connecting with SQL-Studio as BWPROGI shows the tables in schema BWALLE and we can read,update,... the data,
but with MAXDB 7.8 we get an error when doubleclicking on a table to look at the table structure.
With MAXDB Maestro everything works as expected.
Regards
Albert

Hello
How to do this???
Alter user BWPROGI DBA??
BWPROGI is member of group BWALLE and for group members i can only set mode resource or standard!
Or do you mean something else?
Regards
Albert

Problems opening perspective in Database Studio

Hi,
after installation of the latest Database Studio release it doesn't work how I would like to.
When i try to open the Database Studio perspective it throws an error:
Problem opening perspective
'com.sap.sdb.tools.ui.perspectives.mainPerspective'
I have Java 1.6.0_07 installed.
Has anyone an idea?
Thank you.

Hi Norma,
I did resolve the issue.
Basically MAXDB Database sturio 7.8 requires JRE 1.6. I was having same issues. Then i uninstalled MAXDB
Uninstall the Database Studio version.
1. To uninstall, call the installation manager 7.8 ("Programs -> SAP MaxDB -> Installation Manager").
2. Choose "Remove MaxDB Installation".
3. Under "Legacy", select the Database Studio version.
Selecting "Legacy" ensures that you do not select the Database Studio 7.8 that you have just installed for uninstallation.
4. Choose "Forward" to confirm that you want the system to remove the installation.
Due to the operation of the earlier Database Studio version, some processes may still run (for example, serv.exe). Stop these processes and continue with the 7.8 installation.
And then installed JRE 1.6. Then again Installed MAXDB Database studio and got the same issue.
Then i deleted the files in location c:\Users\<User>\sdb\DatabaseStudio (deleted files .configuration, .metadata, p2) and then restarted maxdb database studio and worked for me.
Ritesh

Integrate MaxDB Database Studio in AiE?

Is there any way to integrate the MaxDB Database Studio in my Eclipse installation which I use for AiE?

Hi Daniel,
the other way around should be possible. In case your MaxDB Studio is based on eclipse juno or kepler it should work.
You find this info in the menu under Help->About Eclipse
Please let me know which version of the MaxDB Studio you have.
Regards,
Thomas.

Error trying to create first database with Database Studio on MaxDB 7.7

After installing the Database Studio 7.7 and starting up, i tried to create a first (local) database following the procedure documented in the online manual:
Under the heading of "Servers" an entry "<Local>" was created.
Then i used the right mouse button to "Create Database...".
A popup window appears with:
Database Server <Local>
Database Name MAXDB
Login Information for Server (user/password) grayed out.
Then doing "Next >" generates the following error:
No installation available on server '<Local>'.
Remark: installation went without problems.
Any help is appreciated greatly.

Hi Simon,
a silly question just to clarify the issue: Do you have a MaxDB Installation on your PC where Database Studio was installed?
What does the Event Log tell you about the issue?
See Window->Show View->Event Log Viewer
or if not listed there
Window->Show View->Other ...->Database Studio->Event Log Viewer
Could you please have a look and tell me what it says? If you find a message that is related to your problem double click it and press the little Copy to clipboard icon in the upper right corner then you can paste the message in your reply.
Cheers,
Daniel

Backup settings in MaxDB Database Studio

Hi @all,
I use under Linux the MaxDB Databasestudio 7.7. How can I save the settings from "my landscape" I have create there a large list from Systems.
KG
Martin

For those who are following this thread, I created a document explaining how to manually import a landscape in Database Studio as of version 7.9.08.11 here:
http://scn.sap.com/docs/DOC-45243
backup settings in MaxDB Database Studio

Create database instanace using Database Studio Software

I have a content server running MaxDB. Many times I have created a additional database using Database Studio software. But each time I am uable to connect back to SAP using transaction OAC0. When attempting to create the repo I get a maxdb error. The error is similar to the one that you recieve when you do not have your Max DB Driver registered. I do have the driver registered as I also have other databases up and running and successfully connected, they were created using sapinst.
Does anyone else have this issue?
Also I would like to setup just one DB and then have each other database exist under this one with its own schema. That way when updates and patches are necessary. I only have to complete this one time. Is this possible with MAXDB 7.8?
Thank you in advance...
Storm

I applied note 582765 and this solved my issue.
Storm

How to log dbm-actions in database studio?

Hi,
I am trying to record the actions database studio does when accessing the database. In example, I want to show the backup information. Which database comands are used?
In DBMgui this was possible I just opend the console window and every further action was printed to this window. This was a nice feature to create batch scripts.
Is this function still available in database studio? How to use it?
Thank you.
Best regards
Christian

Hello,
Window->Show View->General->Console
Window->Preferences->Database Studio->Show console for database management commands
Best Regards
Wolfgang

Database Studio under Vista

Similar Messages

Maybe you are looking for