Database Upgrade Agent not working for upgrading Oracle 9i DB to Oracle 10i

Hi All,
Presently I have completed my Oracle 10i installation on Solaris Server but I am facing an issue during the upgrade process of Oracle 9i to 10g. Whenever I try to upgrade the 9i databases to 10g using DBUA(Database Upgrade assistant) I am facing an issue that Data base not running from oracle home or pfile not found. The exact error message says:-
The upgrade assistant failed in bringing up the database XIPCOTS. Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 obtained from file /var/opt/oracle/oratab was used to connect to the database. Either the database is not running from Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 or the correct Initialisation parameter file (pfile) was not found. To start the database , Oracle needs the pfile. Provide the full path name of the init file for the database XIPCOTS.
In reality the XIPCOTS database is running fine in Oracle 9i and we can connect it using PL/SQL developer in windows.I have also provided the path of pfile but it is still not accepting the same.
Path of pfile I provided :- /XIP/ofaroot/XIPCOTS/pfile/initXIPCOTS.ora
Any help or suggestions would be greately appreciated.
Our both Oracle 9i and 10g are installed on same Solaris server where solaris version is 9
Installation path for 9i :- /opt/apps/home/oracle9i/product/releases/92/92
Installation path for 10g :- /opt/apps/home/oracle/product/releases/10201
Oracle 9i version :- 9.2.0.7
Oracle 10g version :- 10.2.01
Thanks in advance.
Best Regards,
Gourav Banerjee

Can you please mention the specific folder name under oracle home where we need to put this pfile because there are two folder dbs and ds I have allready tried putting it inside dbs its not working. And my home path is correct I hope and is set for oracle 9i directories in the .oraenv file do we need to set it for oracle 10g before the DBUA upgrade.

Similar Messages

  • Database MDS personalization not working for ADF

    NA
    Edited by: Mukesh S Patil on May 28, 2013 1:52 PM

    Hi Frank and all
    1] The issue is when i deploy from console uploading the .ear file ( which has adf-config.xml ) , the application never connects to MDS database. I feel that it is not reading adf-config.xml at all
    2] However when i deploy same using JDeveloper, a window pop up asking the MDS partition name. This time it works . :-)
    But in production i can not deploy through JDeveloper. Then how to tell the application that there is configuration file,read it and store data ???
    Mukesh

  • After Upgradation BPF is not working for some users

    Hi All,
    We have recently upgraded from BPC 5.1 to 7MS SP7.  we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
    Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF  does not work for other users except for the first two people who first  used it. Other users have the same rights as the ones who can access the tasks.
    when they  click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does  not getting any thing.
    Any inputs ??

    Hi,
    Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
    If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
    Hope this will drive you to a potential solution.
    Best Regards,
    Patrick

  • BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

  • Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week. 
    Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
    Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
    Fix:
    With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
    It also supported AOL, AIM, Google Talk, Jabber.
    Guess I miss it frist time... hope this helps...

  • IPhoto Library Upgrader is not working for me.

    I am running a Mac Mini 2.5 GHz Core i5.  (This is the base model of the current Mac mini as of August 2013.)  Running 10.8.4.
    I am trying to get iPhoto to run with an old photo library from iPhoto 4.  (Yes, really.  It's a long story.)  I was happy to see that Apple put out iPhoto Library Upgrader, because I was expecting to have a hard time upgrading.  But it's not working for me.  I downloaded the Upgrader and ran it (several times).  However, when I try to start iPhoto from the old library, I still get the "To open your library with this version of iPhoto, it first needs to be prepared."
    To save you from asking the obvious questions:
    1.  I ran the Upgrader, instead of just downloading it.
    2.  I am sure I selected the old library to be upgraded.
    3.  The Upgrader runs, tells me it's done, and asks me if I want to launch iPhoto.  When I say yes (or when I just launch iPhoto separately), I get the error message again.
    4.  iPhoto will not let me launch with the command option keys pressed.  I still get the error message.
    5.  I can launch with the option key pressed, but if I select the old library, I get the error message.
    6.  I can import the old library, but then I lose all my organization of photos.
    Any ideas will be appreciated.
    Nathan

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto with the Option key held down and try to open the "upgraded" libraryu again.
    NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • EP6.0 SP2 to EP 7 upgrade - UWL not working for PCR approvals

    Hi there,
    Following the EP 7.0 migration, the UWL is not working for PCR approvals.  Following the registration of the WebFlowConnector, using the default configuration, clicking a PCR approval item in the Inbox brings up the following error:
    HTTP handler for starting an external service cannot be read
    In order to rectify this, the following configuration file was uploaded.
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [  ]>
    <UWLConfiguration version="1.0">
      <ItemTypes>
        <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
          <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchIView" handler="IViewLauncher">
              <Properties>
                <Property name="iview" value="com.sap.pct.hcm.isrdispatcher.default"/>
                <Property name="openInNewWindow" value="yes"/>
              </Properties>
              <Descriptions default="launchIView"/>
            </Action>
          </Actions>
        </ItemType>
      </ItemTypes>
    </UWLConfiguration>
    Following the new configuration, clicking the item HAS NO EFFECT i.e. no window, no action, nothing.  The only available option available is an option to Forward the item.
    I have tried the following ItemType names with the same result:
    1. uwl.task.webflow.TS50000075.D46CLNT080
    2. uwl.task.webflow.D46CLNT080_TS50000075
    Has anyone encountered this before?
    Cheers
    John

    FYI.  The problem seems to be occuring as a result of the running EP7.0 with a SAP R/3 46C backend.
    I did manage to get this working in the end.  I had to create an iView say "myISRDispatcher" based on the portal component com.sap.pct.hcm.isrdispatcher.default.  Update the UWL configuration to refer tot his PCD location as shown below:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [  ]>
    <UWLConfiguration version="1.0">
      <ItemTypes>
        <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
          <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchIView" handler="IViewLauncher">
              <Properties>
                <Property name="iview" value="pcd:portal_content/myISRDispatcher"/>
                <Property name="openInNewWindow" value="yes"/>
              </Properties>
              <Descriptions default="launchIView"/>
            </Action>
          </Actions>
        </ItemType>
      </ItemTypes>
    </UWLConfiguration>

  • Alerts are not working for Site collections in a content database

    Hi,
    We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
    or changes happen in the list/document library.
    We have tried with Immediate as well as scheduled alerts both are not working.
    FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
    Any help would be appreciated.
    Thanks
    Ramkumar

    Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
    job-immediate-alerts
    job-daily-alerts
    job-weekly-alerts
    Please check this wiki -
    Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Extended Notification not working for Dialog Task with agent assignment

    Hi Friends,
    I have an issue where I have a user decision step and a sub workflow contains a dialog task with agent assignment.
    Extended notification is configured properly and is working properly for user decision step but its not working for the dialog task created as an activity.
    Batch jobs are configured to run report SWN_SELSEN.
    I was checking SDN and found this discussion handy :
    http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4f/3bed495cc018c8e10000000a42189e/content.htm
    One thing that wonders me is that notifications show up in SOST 4-5 seconds before the user decision step starts execution.
    See screenshot from SOST and WF log.
    SOST log :
    2 questions here: Why is notification not being sent for Dialog task?
                              Why is user decision notification being sent that early even before the User decision task starts execution?
    Please provide your valuable inputs.
    Regards,
    Sandip

    An activity step with agents is supported by the extended notifications if it is a decision task or not, I have used it many times and it works well just no approval/rejection links if it's not a decision task.
    From your screenshot you can see that a mail has been created and is found in SOST, usually this cases are problems with the mail server or connection to it, check the mail settings in the SMTP node in transaction SCOT, also check with mail server team if there is a block to/from the SAP server.

  • Tacacs not working for 5508

    Tacacs not working for 3 new 5508 WLC's...working fine for 6 old 4400 WLC's.
    before 7.116 code upgrade...I remember 5508 was working on and off and now they are not.
    Same configs on SW, WLC and ACS.
    Debug on WLC gives..below message when Tacacs is attempted..
    *aaaQueueReader: Oct 25 09:20:41.700: tplus_processAuthRequest: memory alloc failed for tplus
    Any pointers for troubleshooting? Not sure why statistics show zero...?? Radius is working for users.
    (wlc03) >show tacacs auth statistics
    Authentication Servers:
    Server Index..................................... 1
    Server Address................................... 10.3.121.21
    Msg Round Trip Time.............................. 0 (msec)
    First Requests................................... 0
    Retry Requests................................... 0
    Accept Responses................................. 0
    Reject Responses................................. 0
    Error Responses.................................. 0
    Restart Responses................................ 0
    Follow Responses................................. 0
    GetData Responses................................ 0
    Encrypt no secret Responses...................... 0
    Challenge Responses.............................. 0
    Malformed Msgs................................... 0
    Bad Authenticator Msgs........................... 0
    Timeout Requests................................. 0
    Unknowntype Msgs................................. 0
    Other Drops...................................... 0
    Server Index..................................... 2
    --More-- or (q)uit
    Server Address................................... 10.3.121.22
    Msg Round Trip Time.............................. 0 (msec)
    First Requests................................... 0
    Retry Requests................................... 0
    Accept Responses................................. 0
    Reject Responses................................. 0
    Error Responses.................................. 0
    Restart Responses................................ 0
    Follow Responses................................. 0
    GetData Responses................................ 0
    Encrypt no secret Responses...................... 0
    Challenge Responses.............................. 0
    Malformed Msgs................................... 0
    Bad Authenticator Msgs........................... 0
    Timeout Requests................................. 0
    Unknowntype Msgs................................. 0
    Other Drops...................................... 0
    (wlc03) >show tacacs summary
    Authentication Servers
    Idx  Server Address    Port    State     Tout
    1    10.3.121.21     49      Enabled   5    
    2    10.3.121.22      49      Enabled   5    
    Authorization Servers
    Idx  Server Address    Port    State     Tout
    1    10.3.121.21      49      Enabled   30   
    2    10.3.121.22     49      Enabled   5    
    Accounting Servers
    Idx  Server Address    Port    State     Tout
    1    10.3.121.21      49      Enabled   5 
    We can ping the TACACS servers...

    >show memory statistics
    System Memory Statistics:
    Total System Memory............: 1028820992 bytes
    Used System Memory.............: 458424320 bytes
    Free System Memory.............: 570396672 bytes
    Bytes allocated from RTOS......: 21939008 bytes
    Chunks Free....................: 29 bytes
    Number of mmapped regions......: 45
    Total space in mmapped regions.: 212779008 bytes
    Total allocated space..........: 12015112 bytes
    Total non-inuse space..........: 9923896 bytes
    Top-most releasable space......: 133800 bytes
    Total allocated (incl mmap)....: 234718016 bytes
    Total used (incl mmap).........: 224794120 bytes
    Total free (incl mmap).........: 9923896 bytes
    show buffers
    Pool[00]: 16 byte chunks
        chunks in pool:    50000
        chunks in use:     19030
        bytes in use:      304480
        bytes requested:   90479 (214001 overhead bytes)
    Pool[01]: 64 byte chunks
        chunks in pool:    40000
        chunks in use:     14519
        bytes in use:      929216
        bytes requested:   566395 (362821 overhead bytes)
    Pool[02]: 128 byte chunks
        chunks in pool:    20000
        chunks in use:     7726
        bytes in use:      988928
        bytes requested:   672853 (316075 overhead bytes)
    Pool[03]: 256 byte chunks
        chunks in pool:    4000
        chunks in use:     808
        bytes in use:      206848
        bytes requested:   154777 (52071 overhead bytes)
    Pool[04]: 1024 byte chunks
    --More-- or (q)uit
        chunks in pool:    15300
        chunks in use:     11645
        bytes in use:      11924480
        bytes requested:   4945714 (6978766 overhead bytes)
    Pool[05]: 2048 byte chunks
        chunks in pool:    1000
        chunks in use:     189
        bytes in use:      387072
        bytes requested:   355272 (31800 overhead bytes)
    Pool[06]: 4096 byte chunks
        chunks in pool:    1000
        chunks in use:     36
        bytes in use:      147456
        bytes requested:   102479 (44977 overhead bytes)
    Raw Pool:
        chunks in use:     186
        bytes requested:   156052303
    show process memory
    Name               Priority       BytesInUse  BlocksInUse    Reaper
    cslStoreManager    (240/  7)              0            0      (  0/  0)%
    System Reset Task  (240/  7)              0            0      (  0/  0)%
    reaperWatcher      (  3/ 96)              0            0      (  0/  0)%   I
    osapiReaper        ( 10/ 94)              0            0      (  0/  0)%   I
    TempStatus         (240/  7)            424            1      (  0/  0)%   I
    pktDebugSocketTask (255/  1)              0            0      (  0/  0)%
    LICENSE AGENT      (240/  7)           2228           85      (  0/  0)%   I
    emWeb              (  7/ 95)        1235795        20743      (  0/  0)%   T 300
    webJavaTask        (240/  7)              0            0      (  0/  0)%
    fmcHsTask          (100/ 60)              0            0      (  0/  0)%
    apstatEngineTask   (240/  7)              0            0      (  0/  0)%
    rrcEngineTask      (240/  7)              0            0      (  0/  0)%
    spectrumDataTask   (255/  1)        1614480           12      (  0/  0)%
    spectrumNMSPTask   (255/  1)          28808            3      (  0/  0)%
    wipsTask           (240/  7)              0            0      (  0/  0)%
    tsmTask            (255/  1)              0            0      (  0/  0)%
    cids-cl Task       (240/  7)              0            0      (  0/  0)%
    ethoipSocketTask   (  7/ 95)              0            0      (  0/  0)%
    ethoipOsapiMsgRcv  (240/  7)              0            0      (  0/  0)%
    --More-- or (q)uit
    envCtrollerStatus  (240/  7)              0            0      (  0/  0)%
    rfidTask           (240/  7)              0            0      (  0/  0)%
    idsTrackEventTask  (239/  8)              0            0      (  0/  0)%
    DHCP Server        (240/  7)              0            0      (  0/  0)%
    bcastReceiveTask   (240/  7)              0            0      (  0/  0)%
    ProcessLoggingTask (240/  7)              0            0      (  0/  0)%
    CDP Main           (240/  7)           3100           13      (  0/  0)%
    sntpMainTask       (240/  7)              0            0      (  0/  0)%
    sntpReceiveTask    (240/  7)              0            0      (  0/  0)%
    cdpSocketTask      (240/  7)              0            0      (  0/  0)%
    grouping Task      (255/  1)              0            0      (  0/  0)%
    dot11a             (255/  1)             63            3      (  0/  0)%
    rrm Socket Task    (  1/ 97)          35024            1      (  0/  0)%
    rrm Socket Task    (255/  1)          35024            1      (  0/  0)%
    dot11a             (255/  1)              0            0      (  0/  0)%
    grouping Task      (255/  1)              0            0      (  0/  0)%
    dot11b             (255/  1)            105            5      (  0/  0)%
    rrm Socket Task    (255/  1)          35024            1      (  0/  0)%
    dot11b             (255/  1)              0            0      (  0/  0)%
    rrm Socket Task    (255/  1)          35024            1      (  0/  0)%
    apfPmkCacheTimer   (240/  7)              0            0      (  0/  0)%
    Apf Guest          (240/  7)              0            0      (  0/  0)%
    RLDP Schedule Task (240/  7)              0            0      (  0/  0)%
    --More-- or (q)uit
    apfMsConnTask_5    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_4    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_6    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_7    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_3    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_2    (175/ 32)              0            0      (  0/  0)%
    apfLbsTask         (240/  7)              0            0      (  0/  0)%
    apfMsConnTask_0    (175/ 32)              0            0      (  0/  0)%
    apfMsConnTask_1    (175/ 32)              0            0      (  0/  0)%
    apfProbeThread     (200/ 22)              0            0      (  0/  0)%
    apfOrphanSocketTas (240/  7)              0            0      (  0/  0)%
    apfRogueDetectorTh (175/ 32)              0            0      (  0/  0)%
    apfRogueTask       (240/  7)              0            0      (  0/  0)%
    apfOpenDtlSocket   (175/ 32)              0            0      (  0/  0)%
    apfRLDP            (175/ 32)            424            1      (  0/  0)%
    apfRLDPRecv        (175/ 32)              0            0      (  0/  0)%
    apfReceiveTask     (175/ 32)              0            0      (  0/  0)%
    mmMfpTask          (175/ 32)              0            0      (  0/  0)%
    mmMobility         (240/  7)           1272            3      (  0/  0)%
    mmSSHPeerRegister  (240/  7)              0            0      (  0/  0)%
    mmListen           (180/ 30)          99920          227      (  0/  0)%
    tplusTransportThre (201/ 22)              0            0      (  0/  0)%
    radiusCoASupportTr (201/ 22)              0            0      (  0/  0)%
    --More-- or (q)uit
    EAP Framework      (240/  7)              0            0      (  0/  0)%
    aaaQueueReader     (225/ 13)           3518           12      (  0/  0)%
    radiusRFC3576Trans (201/ 22)              0            0      (  0/  0)%
    radiusTransportThr (201/ 22)              0            0      (  0/  0)%
    pemReceiveTask     (240/  7)              0            0      (  0/  0)%
    iappSocketTask     (240/  7)              0            0      (  0/  0)%
    ccxRmTask          (230/ 11)              0            0      (  0/  0)%
    ccxS69Task         (240/  7)            424            1      (  0/  0)%
    ccxDiagTask        (240/  7)              0            0      (  0/  0)%
    ccxL2RoamTask      (240/  7)         240424            3      (  0/  0)%
    dot1xSocketTask    (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_7 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_6 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_2 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_3 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_4 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_5 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_1 (240/  7)              0            0      (  0/  0)%
    Dot1x_NW_MsgTask_0 (240/  7)            424            1      (  0/  0)%
    dot1xMsgTask       (240/  7)              0            0      (  0/  0)%
    locpTxServerTask   (220/ 15)            408            2      (  0/  0)%
    locpRxServerTask   (200/ 22)         428043         1961      (  0/  0)%
    capwapSocketTask   ( 72/ 70)         303104          148      (  0/  0)%
    --More-- or (q)uit
    spamApTask6        (118/ 53)          25929           63      (  0/  0)%
    spamApTask7        ( 53/ 78)          24233           59      (  0/  0)%
    spamApTask5        (118/ 53)          23445           61      (  0/  0)%
    spamApTask4        (118/ 53)          23513           58      (  0/  0)%
    spamApTask3        (118/ 53)          19569           48      (  0/  0)%
    spamApTask2        ( 53/ 78)          23809           58      (  0/  0)%
    spamApTask1        ( 53/ 78)          22961           56      (  0/  0)%
    spamApTask0        ( 78/ 68)          39189          106      (  0/  0)%
    spamReceiveTask    (120/ 52)        2204024          252      (  0/  0)%
    spamSocketTask     ( 32/ 85)              0            0      (  0/  0)%
    Image License brok (240/  7)              0            0      (  0/  0)%   I
    Image License brok (240/  7)             28            1      (  0/  0)%   I
    IPC Main Thread    (240/  7)              0            0      (  0/  0)%   I
    License Client Lib (240/  7)             96            1      (  0/  0)%   I
    sshpmLscScepTask   (100/ 60)              0            0      (  0/  0)%
    License Client Lib (240/  7)             96            1      (  0/  0)%   I
    sshpmLscTask       (100/ 60)          25783         1739      (  0/  0)%
    sshpmReceiveTask   (175/ 32)           6697           66      (  0/  0)%
    sshpmMainTask      (100/ 60)         208440          358      (  0/  0)%
    mfpKeyRefreshTask  (255/  1)              0            0      (  0/  0)%
    mfpEventTask       (255/  1)              0            0      (  0/  0)%
    mfpTrapForwardTask (255/  1)              0            0      (  0/  0)%
    clientTroubleShoot (100/ 60)        2841248            4      (  0/  0)%
    --More-- or (q)uit
    loggerMainTask     (200/ 22)              0            0      (  0/  0)%
    debugMainTask      (200/ 22)              0            0      (  0/  0)%
    dot3ad_lac_task    (240/  7)          32901            3      (  0/  0)%
    gccp_t             (240/  7)           5864            5      (  0/  0)%
    dot1dTimer         (240/  7)              0            0      (  0/  0)%   T 300
    dot1dRecv          (250/  3)              0            0      (  0/  0)%
    uart_session       (240/  7)              0            0      (  0/  0)%
    StatsTask          (240/  7)              0            0      (  0/  0)%
    fdbTask            (240/  7)              0            0      (  0/  0)%
    broffu_SocketRecei (100/ 60)             13            1      (  0/  0)%
    SNMPProcMon        (240/  7)              0            0      (  0/  0)%   T 300
    RMONTask           ( 71/ 71)              0            0      (  0/  0)%   I
    SNMPTask           (240/  7)          61089         1064      (  0/  0)%
    DHCP Socket Task   (240/  7)              0            0      (  0/  0)%
    DHCP Proxy Task    (240/  7)              0            0      (  0/  0)%
    dhcpClientTimerTas (240/  7)              0            0      (  0/  0)%
    DHCP Client Task   (240/  7)              0            0      (  0/  0)%   T 600
    BootP              (240/  7)              0            0      (  0/  0)%   T 300
    TransferTask       (240/  7)            848            2      (  0/  0)%   I
    osapiTimer         (100/ 60)          13024            2      (  0/  0)%   T 300
    nim_t              (100/ 60)           2447            3      (  0/  0)%
    dtlArpTask         (  7/ 95)          98436            3      (  0/  0)%
    dtlTask            (100/ 60)          41089           20      (  0/  0)%
    --More-- or (q)uit
    dtlDataLowTask     (  7/ 95)              0            0      (  0/  0)%
    sysapiprintf       (240/  7)          22657            3      (  0/  0)%
    osapiBsnTimer      ( 95/ 62)              0            0      (  0/  0)%
    fp_main_task       (240/  7)       153068796        26868      (  0/  0)%

  • Wake on Demand: Not working for some services, others OK

    I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
    While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
    I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
    Any thoughts... hints... suggestions?
    One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
    Thanks in advance.

    I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

  • Auto_lexer (stemming) not working for other languages(other than english)

    Hi All,
    We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
    But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
    Following is the code for AUTO_LEXER creation:
    CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
    lang_index VARCHAR2(3),
    content_text CLOB,
    CONSTRAINT test_auto_lexer_pk primary key (pkey))
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (1,'eng','I drive a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (2,'eng','I drove a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (3,'eng','I have driven a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (4,'eng','Just check for other things')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (5,'eng','always drive a car')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (6,'eng','it is nothing')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (7,'ger','Ich fahre ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (8,'ger','Ich fuhr ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (11,'ger','immer Auto fahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (12,'ger','es ist nichts')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (13,'ger','sprechen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (14,'ger','sprach')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (15,'ger','gesprochen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (16,'ger','tale')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (17,'ger','Indlæg')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (18,'ger','tales')
    BEGIN
    ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
    END;
    CREATE INDEX test_auto_lexer_ix1
    ON test_auto_lexer(content_text)
    INDEXTYPE IS ctxsys.context
    PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
    select to_char(content_Text) from test_auto_lexer where contains(content_text,
    '<query>
    <textquery lang="ger" grammar="context">
    $fahren
    </textquery>
    <score datatype="integer"/>
    </query>') > 0
    this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
    Could any one help me with this, in case I am missing something here. I would be really thankful.
    Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

    In the future, please begin a new thread for a new question and provide a link to a related question.
    According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
    Basic_lexer attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
    Basic_wordlist attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
    Also, please see the following note:
    Features not available in 11.2.0.3:
    http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
    "Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
    Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
    I don't work for Oracle, so I don't know why they do things the way they do.
    So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
    -- demo:
    SCOTT@orcl_11gR2> select * from v$version
      2  /
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    5 rows selected.
    SCOTT@orcl_11gR2> select value from v$nls_parameters
      2  where  parameter = 'NLS_CHARACTERSET'
      3  /
    VALUE
    AL32UTF8
    1 row selected.
    SCOTT@orcl_11gR2> DROP TABLE news
      2  /
    Table dropped.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> CREATE TABLE news
      2    (pkey            NUMBER,
      3       lang            VARCHAR2 (2),
      4       short_content  CLOB)
      5  /
    Table created.
    SCOTT@orcl_11gR2> INSERT ALL
      2  INTO news (pkey, lang, short_content)
      3    VALUES  (1, 'en', 'I drive a bike.')
      4  INTO news (pkey, lang, short_content)
      5    VALUES  (2, 'en', 'I drove a bike.')
      6  INTO news (pkey, lang, short_content)
      7    VALUES  (3, 'en', 'I have driven a bike.')
      8  INTO news (pkey, lang, short_content)
      9    VALUES  (4, 'en', 'I always drive a car')
    10  INTO news (pkey, lang, short_content)
    11    VALUES  (5, 'en', 'This is nothing')
    12  INTO news (pkey, lang, short_content)
    13    VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    14  INTO news (pkey, lang, short_content)
    15    VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    16  INTO news (pkey, lang, short_content)
    17    VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    18  INTO news (pkey, lang, short_content)
    19    VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    20  INTO news (pkey, lang, short_content)
    21    VALUES  (10, 'de', 'Es ist nichts.')
    22  SELECT * FROM DUAL
    23  /
    10 rows created.
    SCOTT@orcl_11gR2> BEGIN
      2    -- word list:
      3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
      5    -- english lexer:
      6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      7    -- german lexer:
      8    ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      9    ctx_ddl.set_attribute      ('german_lexer',  'composite',       'german');
    10    ctx_ddl.set_attribute      ('german_lexer',  'alternate_spelling', 'german');
    11    ctx_ddl.set_attribute      ('german_lexer',  'mixed_case',       'no');
    12    ctx_ddl.set_attribute      ('german_lexer',  'base_letter',       'yes');
    13    -- multi_lexer:
    14    ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
    15    ctx_ddl.add_sub_lexer      ('global_lexer',  'default',            'english_lexer');
    16    ctx_ddl.add_sub_lexer      ('global_lexer',  'german',            'german_lexer');
    17  END;
    18  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> create index search_news
      2  on news (short_content)
      3  indextype is ctxsys.context
      4  parameters
      5    ('lexer            global_lexer
      6        language column  lang
      7        wordlist       my_wordlist')
      8  /
    Index created.
    SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
      2  /
    Session altered.
    SCOTT@orcl_11gR2> set timing on
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drive') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drove') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
      2  /
    Session altered.
    Elapsed: 00:00:00.01
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fahr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.07
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fuhr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
    select * from v$version
    select value from v$nls_parameters
    where  parameter = 'NLS_CHARACTERSET'
    DROP TABLE news
    EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    CREATE TABLE news
      (pkey           NUMBER,
       lang           VARCHAR2 (2),
       short_content  CLOB)
    INSERT ALL
    INTO news (pkey, lang, short_content)
      VALUES  (1, 'en', 'I drive a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (2, 'en', 'I drove a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (3, 'en', 'I have driven a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (4, 'en', 'I always drive a car')
    INTO news (pkey, lang, short_content)
      VALUES  (5, 'en', 'This is nothing')
    INTO news (pkey, lang, short_content)
      VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (10, 'de', 'Es ist nichts.')
    SELECT * FROM DUAL
    BEGIN
      -- word list:
      ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
      -- english lexer:
      ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      -- german lexer:
      ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      ctx_ddl.set_attribute     ('german_lexer',  'composite',          'german');
      ctx_ddl.set_attribute     ('german_lexer',  'alternate_spelling', 'german');
      ctx_ddl.set_attribute     ('german_lexer',  'mixed_case',          'no');
      ctx_ddl.set_attribute     ('german_lexer',  'base_letter',         'yes');
      -- multi_lexer:
      ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'default',             'english_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'german',              'german_lexer');
    END;
    create index search_news
    on news (short_content)
    indextype is ctxsys.context
    parameters
      ('lexer            global_lexer
        language column  lang
        wordlist         my_wordlist')
    EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    COLUMN short_content FORMAT A30
    ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
    set timing on
    select * from news
    where  contains (short_content, '$drive') > 0
    select * from news
    where  contains (short_content, '$drove') > 0
    ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
    select * from news
    where  contains (short_content, '$fahr') > 0
    select * from news
    where  contains (short_content, '$fuhr') > 0
    /

  • Cascading Select Lists - Not Working for me

    I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
    http://apex.oracle.com/pls/otn/f?p=31517:119
    But it is not working for me.
    I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
    "Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
    having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
    getting the expected results.
    I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
    user selects a country I would like to show the list of states within that country.
    This is what I've done so far:
    Defined an application process:
    Process Point: On Demand: Run ... by a page process.
    Name: CASCADING_SELECT_LIST1
    Process Text:
    BEGIN
    OWA_UTIL.mime_header ('text/xml', FALSE);
    HTP.p ('Cache-Control: no-cache');
    HTP.p ('Pragma: no-cache');
    OWA_UTIL.http_header_close;
    HTP.prn ('<select>');
    HTP.prn ('<option value="' || 99 || '">' || '- All States -'
    || '</option>'
    FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
    FROM tbk_state
    WHERE country_code = :cascading_selectlist_item_1)
    LOOP
    HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
    END LOOP;
    HTP.prn ('</select>');
    END;
    defined and application item:
    Name: CASCADING_SELECTLIST_ITEM_1
    Build Option: - No Build Option -
    Created a 'Form on a table with report' as follows:
    Page 5: Report on TBK_HARDWARE_LOCATION
    Page 6: Form on TBK_HARDWARE_LOCATION
    in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
    <script language="JavaScript" type="text/javascript">
    <!--
    htmldb_delete_message='"DELETE_CONFIRM_MSG"';
    //-->
    </script>
    <script>
    function get_select_list_xml1(pThis,pSelect){
    var l_Return = null;
    var l_Select = html_GetElement(pSelect);
    alert ('Dept no=' + pThis.value);
    var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
    'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
    get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
    gReturn = get.get('XML');
    // gReturn = get.get();
    alert('Enames=' + gReturn);
    if(gReturn && l_Select){
    var l_Count = gReturn.getElementsByTagName("option").length;
    l_Select.length = 0;
    for(var i=0;i<l_Count;i++){
    var l_Opt_Xml = gReturn.getElementsByTagName("option");
    appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
    l_Opt_Xml.firstChild.nodeValue)
    get = null;
    function appendToSelect(pSelect, pValue, pContent) {
    var l_Opt = document.createElement("option");
    l_Opt.value = pValue;
    if(document.all){
    pSelect.options.add(l_Opt);
    l_Opt.innerText = pContent;
    }else{
    l_Opt.appendChild(document.createTextNode(pContent));
    pSelect.appendChild(l_Opt);
    </script>
    On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
    Name: P6_COUNTRY_CODE
    Display as: Select List
    HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
    Source Used: Only when current value in session state is null
    Source Type: Database Column
    maintain session state: Per session
    Source value or expression: COUNTRY_CODE
    Named LOV: LIST OF COUNTRIES
    Name: P6_STATE_CODE
    Display as: Select List
    Source Used: Only when current value in session state is null
    Source Type: Database Column
    maintain session state: Per session
    Source value or expression: STATE_CODE
    Named LOV: - Select named LOV -
    List of Values definition:
         select state_code || ' - ' || state_desc d, state_code r
         from tbk_state
         where country_code = :P6_COUNTRY_CODE
         order by 1
    LIST OF COUNTRIES is defined as:
    select country_code || ' - ' || country_desc d, country_code r
    from tbk_country
    order by 1
    Now to the problem:
    I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
    try to select a different country I get the following error (on IE):
    "Problems with this web page might prevent it from being displayed properly or functioning properly.
    In the future, you can display this message by double-clicking the warning icon displayed in the status
    bar.
    Line: 17
    Char: 5
    Error: Object expected
    Code: 0
    URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
    p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
    I don't see any of the alert messages.
    I also tried to run the application process code in the SQL - Command Processor (I replaced
    :cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
    button, or try again later.
    Only one top level element is allowed in an XML document. Error processing resource
    'http://cmrac4.cm.timeinc.com:7777/pls/...
    <select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
    Can someone help me please?

    Varad,
    First, thank you for taking the time to try to help me with this problem.
    When I view the page's source code (here are the first few lines):
    <html lang="en-us">
    <head>
    <script src="/i/javascript/core.js" type="text/javascript"></script>
    <link rel="stylesheet" href="/i/css/core.css" type="text/css" />
    <script language="JavaScript" type="text/javascript">
    <!--
    htmldb_delete_message='Would you like to perform this delete action?';
    //-->
    </script>
    <script>
    function get_select_list_xml1(pThis,pSelect){
    var l_Return = null;
    var l_Select = html_GetElement(pSelect);
    //alert ('Dept no=' + pThis.value);
    var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
    'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
    get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
    gReturn = get.get('XML');
    // gReturn = get.get();
    //alert('Enames=' + gReturn);
    if(gReturn && l_Select){
    var l_Count = gReturn.getElementsByTagName("option").length;
    l_Select.length = 0;
    for(var i=0;i<l_Count;i++){
    var l_Opt_Xml = gReturn.getElementsByTagName("option");
    appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
    l_Opt_Xml.firstChild.nodeValue);
    get = null;
    function appendToSelect(pSelect, pValue, pContent) {
    var l_Opt = document.createElement("option");
    l_Opt.value = pValue;
    if(document.all){
    pSelect.options.add(l_Opt);
    l_Opt.innerText = pContent;
    }else{
    l_Opt.appendChild(document.createTextNode(pContent));
    pSelect.appendChild(l_Opt);
    </script>
    It looks like line 17 is:
    var l_Select = html_GetElement(pSelect);
    I'm still not sure why I'm getting this error and why it's not working?
    Thanks,
    Eti

  • IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
    Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

Maybe you are looking for