Dataflow to one attribute from multiple views doesn't work

I have an oracle database, of which I use two tables. Each table has its own view in the meta directory.
The first view contains a table which consists of a uid generated by another system and three other non-important columns. This uid is the only column I need, this should be the naming (rdn) for use with my directory entries.
The second view contains almost all the other data, such as adresses, (full) names, mail etc.
I've configured the first view with a join rule, dn mapping rule and attribute flow rule to sync a new entry from my oracle database view 1 to the metaview.
Point is that at that time I'm missing information such as givenName, sn, cn etc. As those are required by the objectClass, I configured my attribute flow rule to also flow het uid from database into them.
So that's that. I've got my new entry with the uid I want.
The second view is configured with an attribute flow rule and a join rule so it matches the entry created by the rules above.
Here's the thing: any attribute (such as mail facsimiletelephonenumber, etc) configured in my attribute flow rule from view 2 is synched to the metaview entry, except for those attributes that already are flown from view1.
No matter what attribute I try, for instance givenName, no attribute is never overwritten with a suitable value from my oracle database view 2. It still has the value of uid from my view 1.
Is there a way to fix this or am I missing some settings here? I've fiddled around a bit with the options in the capabilities and configuration tabs with very little success.

AFter some experimentation, discovered the following:
Go to Quiz > Quiz Preferences. Under Settings, there is a
"Allow user to review quiz" check box. Under Pass or Fail, there is
an "Infinite attempts" check box. I had both of these unselected.
Here's what happens when you select or deselect one or both:
Review + 1 attempt: User starts to answer questions, and then
backs up. User can go forward again. Answered questions still
display the answers. Once reaches unanswered questions, they are
now locked.
Review + Infinite: User starts to answer questions, and then
backs up. User can go forward again. All answers to questions
erased and user can answer all questions.
No Review + 1 attempt: User starts to answer questions, and
then backs up. User can't go forward again. (This was the situation
encountered.)
No Review + Infinite: Same as Review + Infinite.

Similar Messages

  • What can i do if one song from iTunes Store is not working?

    What can i do if one song from iTunes Store doesn´t work?
    The song starts normally but it ends after 7 seconds.
    It is the new song from Kid Ink (Show me feat. Chris Brown).
    I bought the whole album and one song doesn´t work. I am a little bit upset.
    Thank you for your help
    Patrick

    Delete and redownload it if doing so is free in your country.
    (99523)

  • How to get one value from multiple duplication for a key figure field

    Hi expert,
          I have a infoprovider, with following format:
            employee     hourly_rate   action_type  count of action
         there are multiple rows for each employee, I want to create query as follows:
            employee     hourly_rate   action_type  count of action
         in which hourly_rate is constant , only retriving one value from multiple rows for one employee, count of action should be summarized. 
    how to get this hourly_rate.
    Many Thanks,

    Hi,
    put the employee in rows panel -> reaming object put it in free char panel.
    suppress the all result rows for the all object except employee .
    select the object -> go to query properties -> select display tab -> select result rows -> select suppress.
    select the employee -> go to query properties -> select display tab -> select result rows -> select always display. - now it will give employee wise hourly rate summarize data.
    Thanks,
    Phani.

  • Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone.  What can I do to stop this from happening?

    Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone.  What can I do to stop this from happening?
    I have tried deleting the account and it deletes all my contacts.  I have verizon and even using back up assistant, it says the contacts are there but they aren't.  The only way i can find a contact is if I start to type a name in and new text but once i sent the new text, the name disappears and it just shows the number.  Siri nor the address book don't recognize any contacts at all.

    I cant find any reciept in my email or in my husbands email.  I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!

  • I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?

    I changed my password and used the new computer, next time I tried to log in it wouldn't accept the password. I tried the old one as well but that doesn't work either. Can anyone help?

    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
    Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.
    Be sure to open Keychain Access and repair the keychain:
    Assuming that you are using a recent build of OS X, go to /Applications/Utilities and launch the app called Keychain Access. Go to the Window pulldown menu and select "Keychain First Aid". Enter your password, set the radio button to "Repair", and click "Start".

  • Cropping pictures with Viewer doesn't work.

    Cropping pictures with Viewer doesn't work.
    Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
    Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

    I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
    Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
    I would try:
    Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
    if that doesn't help, then I'd reinstall Mavericks over your current installation.

  • My 80gb doesn't boot up this morning. apple logo keeps coming up for a few seconds then you hear it "wind down" and got blank. Tried reseting multiple time - doesn't work. Ideas?

    my 80gb IPod doesn't boot up this morning. Worked great last nite. The apple logo keeps coming up for a few seconds then you hear it "wind down" and got blank. Tried reseting multiple time - doesn't work. Ideas?

    my 80gb IPod doesn't boot up this morning. Worked great last nite. The apple logo keeps coming up for a few seconds then you hear it "wind down" and got blank. Tried reseting multiple time - doesn't work. Ideas?

  • I have different account ID's with my iphone and computer. I would like to standardise both to just the one. One of the ID's doesn't work, when I tried to list the second email with the preferred one a message telling me that this email is already in

    I have different account ID's with my iphone and computer.
    I would like to standardize both to just the one.
    One of the ID's doesn't work, when I tried to list this second email with the preferred one a message telling me that this email is already in use pops up.. yes it is, with me??
    Is there an easy to fix this please, Fabfitz

    If the email address you want to use is being used as the primary email address on a different ID you have to manage that ID and change it to a different primary email address.  This explains how: Change your Apple ID - Apple Support.
    If it is being used as an alternate or rescue address on a different ID, you manage the ID and either remove it or change it to a different email address.  This explains how: Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support.

  • Firefox stopped updating a while ago for unknown reason;now stuck at v 2.0.0.20-- trying to manually update from your site doesn't work.

    Firefox stopped updating a while (couple of years) ago for some unknown reason. The button is checked for automatic updates. It was a while before I noticed, so now I've been stuck at v 2.0.0.20 for some time, and trying to manually update from your site doesn't work.
    No update available will work, since I missed some. I can't even see what most of the buttons are on these pages of your site. Do I need to reinstall Firefox, as some people have suggested to me, and if so, how do I go about doing that? I'm not particularly computer program savvy.
    Thanks,
    Taav

    Which version of Mac OS are you running?<br />
    Is that a OS X 10.2 or 10.3 version?<br />
    The last Firefox version that works on OS X 10.2 and 10.3 is 2.0.0.20.
    *https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
    The last Firefox version that runs on Mac OS X 10.4 is Firefox 3.6.28.
    *https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/latest-3.6/
    *http://www.mozilla.org/en-US/firefox/3.6.28/system-requirements/
    Current Firefox versions require a Mac with an Intel processor and OS X 10.6 (Firefox 16 runs on Intel Mac OS X 10.5).
    *http://www.mozilla.org/firefox/23.0/system-requirements/
    For an unofficial Firefox 17.0.8 ESR compatible version that runs on a PowerPC Mac with OS X 10.4.11 or OS X 10.5.8 you can look at TenFourFox.

  • Passing one parameter to multiple views

    Is this possible?  I would like to pass one parameter, a date field, to multiple views.  I cannot use it in the record selection, because my views do a mathematical computation which returns a single value, but I only want to select the data for a single day. 
    The problem is that there are several views and I do not want to have to enter the date parameter a dozen times.

    Try to use add command and write the query like this
    select * from view where datefield={?date}
    also create another add command for the other view
    select * from view2 where datefield2={?date}
    for all the queries create the same parameter with the name {?date}
    Regards,
    Raghavendra

  • Check specific attributes from common  views

    Is there a was to only checkout certain attributes from a common view?
    For example if I am only interested in checking out the lastLogon , userAccountControl and Description (AD) attributes from the "user" view. How would I do so with out checking out the entire "user" view?
    During a workflow I wish to check out the specific attributes and then make my changes and then check the object back in.
    Please let me know if this is possible.
    Another example)
    Currently if i wanted to unlock all acount from a workflow I would use the following code. But I am really only using the "account locked" attribute so if there were a way to limit the view checkout to the "accountlocked" attribute then I could probably streamline the process.
    <Activity id='3' name='UnlockAD'>
            <Comments>&#xA;          On Success do a global unlock .&#xA;        </Comments>
            <Action id='0' application='com.waveset.session.WorkflowServices'>
              <Argument name='op' value='checkoutView'/>
              <Argument name='type' value='Unlock'/>
              <Argument name='id' value='$(accountId)'/>
              <Argument name='subject' value='admin_user'/>
              <Argument name='authorized' value='true'/>
              <Return from='view' to='uview'/>
            </Action>
            <Action id='1'>
              <expression>
                <block>
                  <set>
                    <ref>uview.global.accountLocked</ref>
                    <s>false</s>
                  </set>
                </block>
              </expression>
            </Action>
            <Action id='2' application='com.waveset.session.WorkflowServices'>
              <Argument name='op' value='checkinView'/>
              <Argument name='subject' value='admin_user'/>
              <Argument name='authorized' value='true'/>
              <Argument name='view' value='$(myview)'/>
            </Action>
            <Transition to='Notify User'/>
          </Activity>

    sec_tk wrote:
    Checking out a user view will always get you the whole view, you cannot get a partial view. What would be possible is coding your own view, but that requires a lot of hacking and I don't think it's worth the effort.Sorry to jump in late but just for clarification of others who happen to stumble on this by a search you most definitely can checkout a view with only partial data returned. It's one of the optimization techniques recommended to speed up workflows.
    See [http://docs.sun.com/app/docs/doc/820-5823/ahyci?l=en&a=view&q=TargetResources] and use the TargetResources argument when checking out a view.So your checkout view action would look like this:
    <Action application='com.waveset.session.WorkflowServices'>
        <Variable name='view'/>
        <Argument name='op' value='checkoutView'/>
        <Argument name='type' value='User'/>
        <Argument name='id' value='$(WF_CASE_OWNER)'/>
        <Argument name='Form' value='Empty Form'/>
        <Argument name='TargetResources'>
            <list>
                <String>Resource 1</String>
                <String>Resource 2</String>
            </list>
        </Argument>
        <Return from='view' to='user'/>
    </Action>

  • One big report, multiple views

    is it ok (as a good practice) in OBIEE Answers, when dealing with a complex BM, to build a big report with lots of dimensions and measures involved , and then create many views for that report, each using a limited number of dimensions / measures available in the report ?
    I have experienced a few cases when a complex report with multiple views displays incorrect results , while if creating simpler reports for each of the views the results are correct.
    and that seems to me because, on each of the small simple reports a correct sql query is generated, while on the big report OBIEE tries to achieve the requirements using just one or two much more complex (and with lower granularity) queries ( the result of which are are used by presentation layer to further compute -sometimes incorrectly- the values for each of the report views).
    sometimes even when I exclude a dimension column from all views (while is still present in the report) the sql query generated still use it.
    is this a normal behavior ? have anyone experienced similar issues ? I'm having some hard time explaining these to the users that create reports.
    thank you.

    Couldn't find anything in the documentation to support that , though. How to explain this to the report writers ? many times it is more convenient to them to just create a big report with lots of views...instead of many reports.

  • Reg: Internal popup window from multiple Views

    HI All,
        I have a Internal Popup window() from 5 views, I am able to open a window and close from view1(according to the docs from SDN).
    I tried using the same logic in remaining views(2,3,4,5).
    I am able to open but while closing the window event fired is going to CompController and return to the "Parent window" of the Popup. For view2,3,4,5 this not taken as a parent window. Please help me
    Thanks
    Nagaraju

    Hi Naga,
    Disable the parent iviews message area before calling the child(popup) window. Then you can get the message in the child(popup) window.
    According to documentation, oldest (parent) message area would be used if there are more than one windows (in a layout).
    see this thread also How to display messages in pop up windows?
    PradeeP

  • Calling comp controller attribute from iinside view

    HI all,
    I want to know how to call a component controller attribute from inside a View's method?
    any sampe coding..?
    Regards,
    Shanthi

    Well, you can use the wizard. Just call any method from the component controller. The wizard will create you the code including the line how you will get a reference to the component controller, which is the point here.
    After you have the reference to the component controller, let's say lo_component_controller, you can access its attributes like this:
    lo_component_controller->your_attribute
    Then of course delete the unnecessary lines of code.
    Regards,
    Karri

  • One Entity with multiple views

    Hi,
    My Jdev : 11.1.2.3.0
    I created entity like EmployeeEO and views like EmployeeView1, EmployeeView2, EmployeeView3 and EmployeeView4.(Single entity but multiple views).
    my requirement is how to use these views as panelTabed in 4 different tabs..
    issue :
    =====
    If i create single row in the  first tabs EmployeeView1, but other tabs views also automatically created the row. How to avoid that.
    Thanks,

    Take a look at:
    Maintaining New Row Consistency in View Objects Based on the Same Entity
    and
    How to Change the Default View Link Consistency Setting
    Advanced View Object Techniques - 11g Release 1 (11.1.1.6.0)

Maybe you are looking for

  • Can't open Camera Raw from Bridge CS3

    Need Help with the following issue. Until recently I was able to open & edit camera raw files in Bridge CS3. Tried to update Bridge from Adobe website and all of a sudden the "open in camera raw" option under File is greyed out. Also right-clicking t

  • Problem getting results with no unique key in a joined query

    I created a descriptor to do a joined query, which generated a query in log as: Select t0.empID,t1.empID, t1.phone from Emp t0, Phone t1 where t0.empId=t1.empId and t0.empId=1001 When I run it, I got the result as: 1001,1001,9999999 1001,1001,9999999

  • Changing to new black cartridge

    Need to change black cartridge 901.  Changing to 901XL which, according to the box, is appropriate for my printer. I get a error message no matter what I do.

  • Transferring Data from Hierarchy

    Hi Experts, We have a complex bespoke hierarchy in system, consisting of several/different levels of granularity. Hierarchy looks like as follows: <b>- Root</b> <b>-- Level 1.1</b> <b>----Level 1.1.1</b> <b>------Level 1.1.1.1</b> Leaf 1 Leaf 2 <b>--

  • Why does my ipad say 10.6 gig used and 2.2 available

    Why does my ipad air say 10.6 GB used and 2.2 GIG available when its a 16 Gig ipad. Cant figure it out. please help