Dataguard MRP not applyinig the logs

Hi All,
Database version - 10.2.0.4
Primary is 3 node RAC
Standby is non RAC
Its a physical dataguard configuration..
Archive logs are skipping from primary to standby server, but MRP process is not applyinig the logs properly..
Could not see any errors in the alert log..
PROCESS STATUS CLIENT_P SEQUENCE# BLOCK# ACTIVE_AGENTS KNOWN_AGENTS
MRP0 APPLYING_LOG N/A 4990 1586 0 0
Restarted the MRP and also bounced the standby, but still its showing as applying log for 4990 seq.
Alert log entry
Thu Apr 7 10:15:30 2011
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION
Thu Apr 7 10:15:30 2011
Media Recovery Log /log1/archivelog/2_4990_722434300.dbf
After this stage, it is not moving forward.. Please advise..
Thanks & Regards,
Rakesh
Edited by: Oracleappsdba on Apr 7, 2011 8:33 AM

Hi...
No network failure...infact there are two database in the same servers and for one database we dont have any issues.
Both the databases have same configuration..
Two week's back we added third node to the primary RAC cluster, after that for 1 week we not had any issues and this issue started coming this week.
We recreated the standby control file and added third thread standby log after the third node addition.
This issue is a intermediate issue, some time its going smooth and some time its stuck and after several minutes it starts applying the log.
We dont see any errors in the primary and standby alert logs...
Thanks & Regards,
Rakesh

Similar Messages

PT 8.53.10/CS9.0 & HR 9.1, PORTAL 9.1 - Mozilla Firefox 37.0.1 & 37.0.2 are not supported ? I am not getting the log in page & If i access from portal i am not able to get the CS or HR pages in portal !

Hello
We are getting following error in Mozilla Firefox 37.0.1 & 37.0.2 versions, when we tried to access HR PIA or CS PIA, But we are able to get the PORTAL PIA login and able to log in to Portal PIA and If we access CS or HR pages from Portal we are getting the same error below, It was working fine with until Mozilla Firefox 36.0.4 version.
========================================================================================================================================================
Secure Connection Failed
The connection to cs.ntc.edu was interrupted while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
========================================================================================================================================================
Environment details:
PT 8.53.10/CS9.0 & HR9.1, PORTAL 9.1
MS SQL Server 2012
Windows 2008 R2 (64-bit).
Weblogic & Tuxedo.
IE &Google Chrome works fine.
Appreciates your help !
Thank You

My first guess would be because Firefox disabled insecure TLS fallback in 37.
We have disabled insecure TLS version fallback. If a secure site isn’t working, you can try setting the “security.tls.version.fallback-limit” preference in about:config to 1 and see if it works then.
Weblogic out of the box does not use the newest protocols and is version intolerant. I would need detailed config info to say for sure why PORTAL might still be working. Are they running different Java versions for Weblogic? Is there a mix of Certicom and JSSE being used for SSL? Check out this analysis for more details.
http://remotepsadmins.com/2015/01/24/ssl-weblogic/
Let us know what you find. Others may experience the same thing if they are configured similar to you.

DMIS 2010 SP10 replication is not clearing the logging table

Hello,
We have installed the DMIS2010 SP10 on our test environment and for some table the replication is getting extreme slow. Initially I had a case when I started to load a new table and all the logs collected during the initial load was not processed after the load turned into replication. Every new entries to the table were replicated to HANA but the entries which were created during the initial load were still in the logging table.
After a while some other table got this issue, entries got left in the logging table and no replication done to HANA for those lines.
In the ltro I see really high latency for these tables where the replication is not ok.
Did anybody had similar issue?
OSS is opened, but no reply yet from SAP, so any help would be appreciated.
Thanks for any advice
Tamas

Hi Tobias,
we need to upgrade the ECC kernel to be able to use DMIS2011 and that is not possible at the moment due to other dependencies. I requested our basis team to review the notes, maybe they missed to install any.
BR
Tamas

My email inbox does not displaay the log in/out feature, how do i activate it?

when i log into my email account, the menu bar in my inbox, does not display the login/out feature. how do i know that when i log out the page is secure from hackers?

It seems that you have save your email account in a system wich is used frequently by you. if that is right and you wan to check each time that your account is logged out then,you can done this by following step :
* Goto '''Open Menu''' >'''options'''
* Under '''Security''' Tab uncheck the '''Remember Passwords for sites''' box under '''password''' .
Then You can '''Remove the individual Cookies''' from '''Privacy''' Tab.
Now your account login each time when the password is entered .
PS: In Some Mail handlers(Mostly in gmail and yahoo,they ask for the saving the password at first time when password is entered into the account,so you select NO at that time ) .

Do not USE the LOG gathering function

I have try to use the build in "Log_gathering_help" by activate collect_logs.js - it worked but your password is exposed in msapilog.log in clean text - THAT must be a mistake ?
Why I did a log..
Problems with Proxy from Symantec.

even if the password is revealed in the logs, i assume the logs will be sent to Nokia for your assistance, right? you don't just send logs to everyone you know.
Greece Nokia X6 RM-559 v40.0.002

MRP not rescheduling the planned order by itself

Hi,
After MRP i could see that the planned order is not present as per the date of the requriement whereas the planned order at a future date is given a Exception message 30 : Plan accordingly to schedule and proposed the date of the requirement. The requirement is beyound the replenishement lead time and hence MRP should reschedule by itself the planned order as per the date of the requirement rather than giving a exception message as above for a future dated planned order.
I am not sure what is it i am missing. Could you explain.
Thank you

Dear ,
MRP will re schedule the planned order based couple of inputs and checks during MRP run .Basically , it depends on following
In MRP exectuion you should keep : Procesisng Indicator : NETPL: The system only plans materials that have undergone a change that is relevant to the planning run within the period which you defined as the planning horizon. The system sets the net change planning horizon indicator automatically for these materials
Planning Mode : 3-Delete and Re-create Planning
It also depend on following set up and you need to analysie that :
1.Planning Time Fence : based on the PTF , there will not be any automatic changes relevent for MRP
2.MRP Type : PD , it will adoped normal planning and it will not re-schedule order proposal automatically .In you case can use P1-Automatic Firming and Re-schedule Out Of Order Proposal based planning time Fence
3.Keep your Planning Horzon more than the Highest Material Lead Time in Material Master MRP2 View
Please check and revert
Regards
JH

The log file behavior does not follow the logging preferences I set

I set my log file parameters to capture a large amount of information.
Specifically, I wanted to capture log files as big as 1GB and keep them
for 3 sets of backups. The settings I used are as follows:
<P>
logfile.http.maxlogfilesize 1073741824
logfile.http.maxlogsize 4294967296
<P>
However, after setting these values, I can see only two log files, the file
for today and the file for yesterday.
(See attachment)

I've given full read and write privileges
To whom? And as whom are you connecting?

I screwed up when I registered for firefox sync, and did not complete the registration and did not get the log in key. Now it says my e-mail address is in use and I cannot reregisted with my e-mail address. How can I fix this?

I am trying to sync my iphone

Go to the following address: https://account.services.mozilla.com/
If you DO NOT remember your password, press the "Forgot your password?" link and it will be sent to the e-mail address that you used for registration.
Enter your e-mail address and your password. Follow any additional prompts. '''This should remove your account and all Sync data associated with your account from the servers.'''
Then, set up a new account.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Could not find the log in SCUL for changes made into user.

Hi,
We assigned role to user in prob system in CUA .
I cannot find who has made those changes into that user.
I have looked in SCUL but could not find it. I did not find any changes in SUIM.
Can anybody help me hjow can i find who has added that role.
Thanks Rajesh
Edited by: Rajesh Nanda on Apr 1, 2009 12:10 AM

Hi Rajesh,
this is the normal behaviour. The user gets changed in the CUA-child system by the user who is used in the RFC-connection form CUA master to cua child. Only in the case you use a trusted/trusting RFC connection, the user who performs the changes in the central system connects also to the child systems. Only in that case you will find the 'real' user as changer in the child system change docs.
With SAP note # 1079207 new change documents are delivered for the CUA-case. To evaluate that changedocs you can use the new report rsusr100n (Ithink ,that it is still not integrated in SUIM until now, so you have to start it in se38,...)
b.rgds,
Bernhard

Deleting history does not delete the log of calls ...

In order to delete history, I followed the recommended procedure:
Skype --> privacy --> clear history --> save
The history appears cleared: however, when I do this
Skype --> account --> view call history
the entire history is still there. Any ideas how to clear this?

Hi,
Our call history as it appears in our accounts remains on record where we can review it for a term of six (6) months. I am not aware of any means for us to "remove" or to "delete" these records; you would need to contact Skype customer service to enquire further.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

How to get the log information when using a class?

Hi All,
I have a simple question, which I don't know how to solve. I am using org.apache.commons.logging.Log and LogFactory to do some logging. A typical situation is exemplified in the following code snippet.
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
class LogClass {
    private static final Log LOG = LogFactory.getLog(AClass.class);
    public void logit(){
        LOG.debug("This is the debugging log.");
public class AClass{
    public static void main(String[] args) {
        LogClass l=new LogClass();
        l.logit();
}But this way, I do not get the log information from the class LogClass. Could anybody please help?
Many thanks.

jschell wrote:
jverd wrote:
...configuration in log4j.xml or log4j.properties.And far as I recall you need one of those two also. If there is no config then there is no output.I thought it used some default config if no file is present, but I could be mistaken. Either way, it adds to the possible problems that the OP could be having, any of which are consistent with his rather vague question.
1) He's passing the wrong class to the LogFactory, and hence getting a logger with the wrong name, so he's seeing a different name than he expects in the output that's being produced.
2) His config file does not contain the proper format to include the actual classname, independent of the logger's name, so he's missing a piece of desired information in each line of the output that's being produced.
3) His config file indicates a threshold that's less verbose than the level at which his code is logging, so no output is present when he wants it.
4) His config file is missing (or not where it's expected to be), so no output is being produced at all.
5) His config file is missing (or not where it's expected to be), so a default level or format is being produced, effectively the equivalent of one of the misconfigurations described in #2 and #3.
Since the OP seems to have vanished, we may never know.

MDIS failed to generate the Log file!!!

Hello All,
Having a issue where MDIS is not generating the log file..
The scenario is something like this-
The files are getting archived and the records not flowing into MDM
Basis team says-
2014-06-30T14:11:33.339,47083231971072,24,"[MDS=sapdpm1 Repository=REAL_ESTATE ClientSystem=MDM_REAL_ESTATE Port=Building]: Nigerian Building updates part 2 - SLKDDY.txt is empty, the file will be skipped
But the source file was having data it was not empty(bit strange!!)
Also its not generating the LOG to analyze
Regards,
Girish

Hi Shenoy,
Let me explain the scenario--
User uploads the file through Portal and through FTP records resides in MDM...the issues is when i tried to import through IM it worked and i tried manually push file through Filezilla FTP it worked.
But when we upload file through portal, the file resides in Archive and generating the message-
2014-06-30T14:11:33.339,47083231971072,24,"[MDS=sapdpm1 Repository=REAL_ESTATE ClientSystem=MDM_REAL_ESTATE Port=Building]: Nigerian Building updates part 2 - SLKDDY.txtis empty, the file will be skipped
But the file is having data.
Regards,
Girish

Log4j not writing the llog file

Hi
I have a webapplication hosted on WAS,which is not writing the log file.Does anybody know the reason.?
I have checked the log4j many times.it seems ok.as same file is working in another environment.
Any help would be appreciated.
Thanks
Akash.

Hi .the problem is solved.i changed the classloading as APPLICATION instead of MODULE in application.xml.
Thanks.
Akash.

Is it possible to route the log generated frm a FNDLOAD cmd to usr def file

Hi,
Is it possible to route the log generated from a FNDLOAD command to user defined file??
Thanks in advance,
Kiran

Kiran,
I think it is not possible, the log file will be generated in the directory where you run FNDLOAD.
Regards,
Hussein

Where does the logging in RDBMSRealm go --and-- are some JavaDocs missing?

I see that a LogOutputStream is created in the example
class RDBMSRealm, but where do all of the log
statements go. The LogOutputStream is created as:
log = new LogOutputStream("RDBMSRealm");
but I do not see and file called RDBMSRealm and/or
I do not see the log statements on stdout.
BTW, I do have logging set to the most detailed
level (Info) from the console if this matters.
Also, are there some JavaDocs missing from
Weblogic's Reference website at
http://edocs.bea.com/wls/docs60/javadocs/index.html
LogOutputStream is an example. I do not see the
class when I select the package
weblogic.logging.
Where is it?
Much Thanks
Bill Ralenkotter.

Thanks Terry,
Sorry, I should have mentioned that I am using WL6.0.
Does anyone know what I need to do to get the RDBMS Realm log to start on
WL6.0.
About the missing JavaDocs: Also, if I am doing development using these
classes I still do not
understand why they are not on the 6.0 refernce site!
About the missing JavaDocs,
I see java docs for a lot of classes, but what document do I use that
helps me to understand the entire framework? The Programming
Weblogic Security does give this information.
Example question: how do I get a reference to the realm to create
users? Should I even be doing this?
Thanks for your help.
Bill.
"THorner" <[email protected]> wrote in message
news:B4D7B3CBF165D311844100C04F4E3E1B031246@DANCERACE01...
If you are using WLS5.1 you much set the property
weblogic.security.realm.debug=true
then this information will be sent to stdout. This is set to false by
default, as there is a lot of information, and it is a big performance
hit.
I think weblogic likes to avoid some of its APIs being public, which is
annoying at times, but probably reasonable
terry
-----Original Message-----
From: Bill Ralenkotter [mailto:[email protected]]
Posted At: Thu 03 May 2001 16:00
Posted To: weblogic.developer.interest.security
Conversation: Where does the logging in RDBMSRealm go and are some
JavaDocs missing?
Subject: Where does the logging in RDBMSRealm go and are some
JavaDocs missing?
I see that a LogOutputStream is created in the example
class RDBMSRealm, but where do all of the log
statements go. The LogOutputStream is created as:
log = new LogOutputStream("RDBMSRealm");
but I do not see and file called RDBMSRealm and/or
I do not see the log statements on stdout.
BTW, I do have logging set to the most detailed
level (Info) from the console if this matters.
Also, are there some JavaDocs missing from
Weblogic's Reference website at
http://edocs.bea.com/wls/docs60/javadocs/index.html
LogOutputStream is an example. I do not see the
class when I select the package
weblogic.logging.
Where is it?
Much Thanks
Bill Ralenkotter.

Dataguard MRP not applyinig the logs

Similar Messages

Maybe you are looking for