DataGuard-Standby on IBM Power6 work with Production 10gR2 on IBM Power5?

Hi
We plan to configure Data Guard(Logical) for reporting purpose with production 10gR2 RAC installed on IBM Power5 64bit machine.
For dataguard -logical standby, available machine is IBM Power6 64bit. As per the data gaurd document, the hardware architecture needs to be same.
But it is not clear if DataGaurd on IBM Power6 will work with Production IBM Power5 machine. Can we go ahead with this configuration? Please advice!
Thanks
Bijay
Edited by: user13310901 on 17 Sep, 2012 2:58 AM
Edited by: user13310901 on 17 Sep, 2012 3:03 AM

Yes I believe it does work.
Sources -
Data Guard Support for Heterogeneous Primary and Logical Standbys in Same Data Guard Configuration [ID 1085687.1]
Data Guard Support for Heterogeneous Primary and Physical Standbys in Same Data Guard Configuration [ID 413484.1]
Best Regards
mseberg

Similar Messages

Push notifications not working with production (apnagent nodes Js)

Hi,
When we tested the push notification in sandbox using apnagent node JS it worked well. But when we switch the sandbox to production it is not working. When we debug the server side we are not getting any errors also in production, but push notifications are delivered to the devices.
First we thought it is a certificate issues and then revoked all the certificates in the portal and created new certificates still no luck.
Can any one tell me why push notifications are not working in production.
Thanks in advance!

You're welcome. The request has been sent in. I first saw your post in the Using Apple Support Communities Forum, now I see it's been moved to the iPod Forum, hopefully it will get moved again.
iIt's been moved.

Serial number won't work with product installed.

Why won't the serial number supplied with Acrobat Pro XI work for installed product?

Hi Larrywe1,
I checked your account and found that there are two license registered under your account, on the installation screen, you will have to enter the previous license number then enter the serial number for current version.
It should work.
^Ani

Security Issue httpOnlyCookies="true" is not working with production environment

Dear All,
I have tired to make set cookie value as httpOnly
The development environment is working fine and give me an output like that
Set-Cookie
WSS_KeepSessionAuthenticated={3644d93c-d1d3-46cd-845f-42c01640ab21};
path=/;
HttpOnly
But when implement the same changes in web.config production environment its not working
Set-Cookie NLSessionCdomainweb=a98q9jnsy0vXk5+RHeHnlKmM+HnneA9KmhIAR6g1bJiwTs8sD6d7dfV1gBffc8HiJXBowxdO8LhZAiIEKiFY6PzNWySyRs5rvgCfPu8XIFnqKcN4XQ4UL9PN3JI3f4E6;path=/;domain=.domain.com
I am using sharepoint 2010, under web.config i made the following changes
Add following tags under system.web
<httpRuntime maxRequestLength="2097151" enableVersionHeader="false"
/>
<httpCookies httpOnlyCookies="true"/>
Add following tags under <system.webServer>
  <httpProtocol>
      <customHeaders>
               <remove name="X-Powered-By" />
             <remove name="MicrosoftSharePointTeamServices" />
      </customHeaders>
    </httpProtocol>
Can any one tell me why it's happening i have checked all possible reasons from my side but no success
Regards
Rashid Bilgrami
RB

Hi,
From your description, I know you want to set cookie value as httpOnly but it is not work.
Please try to add codes below to your global.asax file:
<SCRIPT language="C#" runat="server">
protected void Session_Start(Object sender, EventArgs e)
try
if (Request.IsSecureConnection == true)
                Response.Cookies ["ASP.NET_SessionId"].Secure = true;
catch (Exception)
</SCRIPT>
Please refer to this article:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/0fe55c13-3911-422e-af17-cb5c1ab2abd7/missing-secure-httponly-flags-on-sharepoint-2010-cookie?forum=sharepointadminprevious.
Best Regards
Vincent Han
TechNet Community Support

How to work with Product Catalogs that have multiple levels

I'm having difficulty understanding how to go about setting up a catalog site with multiple levels in the hierarchy. For example, the standard walkthroughs will display product categories and products. When the product category page is viewed, it displays
a list of products. That's fine.
I would like to have categories, sub-categories, and products. For example:
1. Bicycles
a. Road Bikes
b. Mountain Bikes
2. Clothing
a. shirts
b. shorts
The top level landing page should list all categories. Clicking on a category should take the user to a page that lists all sub-categories for that category. How are these landing pages created? It's simple to display the list of products in a sub-category,
as that's just a content search. But how do I generate a list of subcategories (or categories) dynamically, without having to manually create a page for each one?
Also, each category / subcategory should have it's own metadata, such as description, contact info, etc.
Thanks,
Mike G.

after you connect to a product catalog in site settings->manage catalog connections in a publishing site, page layouts and pages will created automatically for you in the publishing site. for a simple test, you can just leave everything to it's default
value when you connect to a catalog. you can find address for these page created in site settings->term store management tool, click on the term under your site collection group, and open the term-driven pages.
please read what follows for more:
http://blogs.msdn.com/b/justinvoels/archive/2012/09/24/sharepoint-2013-search-driven-publishing-and-cross_2d00_site-collection-publishing-overview.aspx
http://blogs.msdn.com/b/faceted_navigation_in_sharepoint_2013/archive/2012/11/23/configure-faceted-navigation-for-a-product-catalog-in-sharepoint-2013.aspx

What's the deal with product availability on IBM/AIX?

Can some rep from Oracle explain why IBM/AIX is always last in line for new versions of Oracle software (database/app server) to become available?
We're now in a situation where iAS9.0.4.0.0 is at stage projected on IBM/AIX for quite a while now and we need it badly. What's the holdup?

<bump/>

Installing linux O.S. for working with IAS 10gR2 and DB11g

Hi all.
I have a Dell server with linux enterprise 5.5, but I want to re install all, reformat ,
because I need to learn how to.
how decide which O.S install if I will use it with IAS 10g and Database 11g ?
best regards

toga wrote:
Hi all.
I have a Dell server with linux enterprise 5.5, but I want to re install all, reformat ,
because I need to learn how to.
how decide which O.S install if I will use it with IAS 10g and Database 11g ?
best regardsInstall the OS the product you have is certified for.
Or install the product that is certified for the OS you have.

Calling a stored procedure from a URL with production XE?

I have granted execute on a stored procedure to the user ANONYMOUS in order to allow it to be called from a URL. But I am getting a Forbidden error, rather than the expected execution of the procedure. Is there a trick to get this working in production XE?

I think I figured this out. I don't think the grant to ANONYMOUS is going to work with production XE and the online documentation is in need of an update. It appears that production XE has been locked down and you will need to specify the name of each stored procedure you wish to allow to be executed by adding it to the WWV_FLOW_EPG_INCLUDE_MOD_LOCAL function. This is spelled out in more technical detail here: http://download.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25309/adm_wrkspc.htm#BEJCGJFJ
Another alternative that would work involves creating a separate DAD. Using the DAD approach with my schema made all of my stored procedures callable from a web browser, so I rejected this approach. To make this usable (secure) I would have needed to create and maintain a separate database user for the DAD and then only granted it execute for the stored procedures I wanted to be callable from a URL.
Finally I read about using an on-demand procedure and having it invoke the desired stored procedure. While I didn't try this out, it sounds like another good approach because it maintains session security. If it can be used to return an image I do not know.
- Jim

How to Get Your Inkjet Printer Working with Windows 8 Consumer Preview

The drivers for your HP Inkjet Printer are already included in the new Windows 8 Consumer Preview!
You do not need to download drivers to use the product. Keep reading to learn how to install the print driver included in Windows 8 Consumer Preview with your HP printer.
Getting started in Windows 8 Consumer Preview
HP designed a quick and easy tool that helps you find the best driver for your printer in Windows 8 Consumer Preview: the HP Printer Install Wizard.
Download Printer Install Wizard for Windows 8 Consumer Preview
NOTE:The HP Printer Install Wizard is not available for all printer. This tool is available only for Windows 8 Consumer Preview. The HP Printer Install Wizard works with products connected with a USB cable or with a wired (Ethernet) or wireless network connection. If you would like to connect your product wirelessly, but it is not yet on a wireless network, you need to temporarily connect the product with a USB cable to run the wizard.
Step one: Download the HP Printer Install Wizard
1.   Click the following link to download the Printer Install Wizard:
HP Diagnostic Utilites
2.   When the tool finishes installing, click Finish. The wizard opens automatically.
Step two: Run the HP Printer Install Wizard
1.   Press the Power button to turn on the printer, if it is not already on.
2.   Connect the USB cable to the HP printer and to the computer, if it is not already connected.
3.   Make sure that your computer has an internet connection. The wizard must access the internet to work correctly.
4.   Click Next to begin the utility. The wizard displays a list of detected printers.
5.   If the wizard detects more than one printer, select your HP printer from the list.
6.   The wizard automatically displays the best available driver for your HP printer.
If a full feature driver is available, the wizard detects it. Click Next to download and install the software. For full functionality, HP recommends installing the full feature driver if it is available.
If an included print driver is available, the wizard explains that the driver is already installed. It will also supply a link to more information about using an included driver.
JonW
I work for HP

This is GREAT! My printer has print drivers available.
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

Premiere does not work with Audition

I am working with Production Premium CS5.5 (German version). When ever I try to send audio to Audition (Right click/Edit in Audition) I am receiving the follwong error message: File could not be found. The project and all footage is in the same folder. Production Premium is running on my system SSD. Did this happen to someone? Any idea what could be the reason? I posted this to the German Forum and s.o. asked me to give shorter names to the files. It did not work out though. I had this problem with als my projects yet but could ignore the problem since they were simple projects with one audio only. Now it is too complex and I would like to use this function.

Here is a picture of the error message. In line one it says "opening converted file", next line,: "warning/error - when opening the following file an error occured.". IN the end row: "Details: the file could not be found"
Audition is installed and runs fine seperately. There is no problem with opening audio files, e.g. wav.
Dynamic link in combination with AE and Encore is fine as well. Actually I did not know that I can send photos from the timeline to photoshop. Does this work via right click? I do not find any option then. I only found in the file menue the option : "New/Create Photoshop file"

Does RMAN Work With DataGuard And Restore Points?

I only have a basic experience of RMAN on a training course and no experience of Data Guard.
We have an 11g set up where DataGuard is keeping production and DR in sync.
On a release weekend we want a rollback strategy in case any of the config goes wrong.
When the database was small and before we were using DataGuard this just consisted of datapump.
Now the database is 120GB that isn't an option in our timescale.
Can I set a restore point and use archive logs to keep track so that if there is a problem and we need to roll back we can just rollback to the restore point?
Would this work or would it cause problems with DataGuard?
Is rolling back to a restore point a relatively fast operation?

DataGuard works with Restore Points. The use case is when
a. You created a Restore Point for the Primary and Standby
b. You upgraded the Primary
c. You find a fault with the Primary
d. You revert both the Primary and the Standby to the Restore Point and resume DataGuard.
Hemant K Chitale

Standby PRI not working with voice Gateway Router & CUCM

Hi ALL ,
GOOD Day all of you .
I am facing a big problem i.e standby PRI not working with VG & CUCM , I have checked all the configuration parameter on VG & CUCM found ok but I am unable to make any call from standby link also incoming not come on the standby link . When I make a call on my Pilot no but getting busy tone .
I observer the some errors on VG like Cause i = 0x8286 - Channel unacceptable on my second PRI channel .
Please help me to reslove this proem .
Following are the PRI configuration Parameter on CUCM .
Product Specific Configuration Layout
Line Coding : HDB3
Framing : NON CRC4
Clock : External
Input Gain (-6..14 db) 0
Output Attenuation (-6..14 db) 0
Echo Cancellation Enable
Echo Cancellation Coverage (ms) 64
PRI configuration on VG
interface Serial0/0/1:15
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
BR,
SANDIPAN

Hi Craig ,
Thanks for your reply .
We are using the full 30 channel E1 PRI .
following are PRI Channel Statistics:
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 1. Layer 3 output may not apply
ISDN Se0/0/0:15, Channel [1-31]
Configured Isdn Interface (dsl) 1
   Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
   Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)
    Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    State   : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Please find following debug error
VG_RO_01#isdn test call interface serial 0/0/0:15 09665484798
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User RX <- RRp sapi=0 tei=0 nr=5
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User TX -> RRp sapi=0 tei=0 nr=4
Mar 7 03:00:54.570: ISDN Se0/0/0:15 Q921: User TX -> RRf sapi=0 tei=0 nr=4
Mar 7 03:00:54.574: ISDN Se0/0/0:15 Q921: User RX <- RRf sapi=0 tei=0 nr=5
CCIL_PUNE_DR_VG_RO_01#
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x1, Called num 09665484798
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=5 nr=4
Mar 7 03:00:55.994: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0084
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Called Party Number i = 0x81, '09665484798'
Plan:ISDN, Type:Unknown
Mar 7 03:00:56.006: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=6
Mar 7 03:00:56.018: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=4 nr=6
Mar 7 03:00:56.018: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x8084
Cause i = 0x8286 - Channel unacceptable
Mar 7 03:00:56.022: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=5
Mar 7 03:00:59.995: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=6 nr=5
Mar 7 03:00:59.995: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0084
Bearer Capability i = 0x8890
Standard = CCITT
Transfer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Called Party Number i = 0x81, '09665484798'
Plan:ISDN, Type:Unknown
Mar 7 03:01:00.007: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=7
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=5 nr=7
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x8084
Cause i = 0x8286 - Channel unacceptable
Mar 7 03:01:00.019: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=6
Mar 7 03:01:03.995: ISDN Se0/0/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=7 nr=6
Mar 7 03:01:03.995: ISDN Se0/0/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x0084
Cause i = 0x80E6 - Recovery on timer expiry
Mar 7 03:01:03.995: ISDN Se0/0/0:15 **ERROR**: CCPCC_CallOrigination: SETUP timed-out (2nd T303) to NETWORK. The SETUP failed.
BR ,
SANDIPAN

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

There's a new driver bundle for OSX 10.6 that you might need to install, the HP link seems to be failing at the moment but there's a version of it here: HP_Installer_Scanjet_v2.4.3_Ph4.dmg
There's a piece on the HP Forum about it here (some folks have problems installing ...)
http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/Scanner-Drivers-softw are-for-Snow-Leopard-Mac-OSX-10-6-will-not/td-p/2301674

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I am confused. Do you mean you found the music, not the tones, or you can't find either?
If the former, then this is normal. You can't redownload tones from the Cloud.

Which CS Master Suite Products CS2,3,4,5,5.5,6 work with which Mac OSx 10.5, 10.6, 10.7, 10.8?

You have no idea what a journey it has been to try to find the answer to all of this. Here is my stab which is open for input.
Which CS Master Suite Products CS2,3,4,5,5.5,6 work with which Mac OSx 10.5, 10.6, 10.7, 10.8?
- When I recently installed 10.6 on a 10.5 Macbook Pro with CS2 Master Suite, I lost all access to CS2. End of story. Unhappy ending at that.
- I have CS4 Master Suite on a MacPro using OS 10.6.8, but my understanding is that if I go to 10.7, I lose all access to CS4. Another bad solution.
- Apparently the same is true of CS5 and 5.5. If one goes to 10.7, you will no longer be able to use those programs.
- The only Master Suite that is 10.8 compatible is CS6. New price $2,599, or $999 upgrade from CS5 or 5.5.
32bit vs 64bit
And to look at 32 bit vs 64 bit briefly. My CS4 Master Suite for Mac has two 64 bit programs, Premiere and After Effects. The Windows version of the same program also included Photoshop as 64bit.
- I assume that as CS Suites went from CS4 to 5 to 5.5 and then to CS6, that more and more programs take advantage of the 64 bit architecture. I don't know the specifics however. Would like to know.
- Also the MacOS has done the same. The newer the operating systems, the more the system takes advantage of mulitple processors, ram, and 64 bit architecture. Again, not sure of the sweet spot here.
And then there was the cloud!
Not sure what to do with that information.
- Great, new products updates all the time
     - downside, what if the updates outgrow my computer? Size and technology?
     - What if the updates outgrow my system software?
     - What if I want to open a cs4 document 5 years from now?
          - do I have to subsribe forever?
          - if I have CS6 on my computer, do some work, and want to open it 10 years from now, I still have the software and a computer.
     - Cost of $30 a month on a special, but $50 a month normally. Sounds cheap month to month, but after two years of $50, I have spent $1,200 on a product that I don't own!
Anyway, all of this comes up because I have multiple versions of Master Suite. I have multiple computers with various versions, and it all goes to crap if I upgrade the system software, or Adobe no longer supports the older versions. This is my contribution to the discussion. Apparently Adobe support had no archived articles to answer any of my questions, they suggested I look online. Great help. As I say, I don't much trust Adobe as my business partner anymore. I think I will work my way towards CS6 and see how long that takes me with Apple system upgrades. I'm not sure what OS 10.9, and beyond may bring as it relates to Adobe products, but I do need to get past my old 32bit applications running on an 8 core machine with 32gig of ram.
Which brings up one final point. I have Imac with 4 gig ram, Macbook pro with 8gig of ram, and MacPro with 32 gig ram. Will 4 gig ram run Cloud CS master suite? Its a worm hole that just keeps getting deeper! I have to find a place on that slope that is cost effective and allows me to hold my position for a few years until I can see how Adobe treats its cloud cutomers, and how well Adobe and Apple play together.
If you have any links to addtional information about various CS programs and which are ported to 64 bit, that would be helpful. I read some things about Rosetta and Java being the culprits in various upgrades to CS programs and the new Mac OS systems.
Also, if you have any work arounds to get CS5.5 to run on OS 10.7 or 10.8, curious to hear about those as well. As I understand it, 10.8 no longer includes the previous Java or Rosetta applications, but I was under the impression that they could be installed after.

Long story short: Simply get CC for teams. At 500 bucks a year it's a steal and those 5 licenses in the base package (or was it 10 even?) cover all your computers, at least the 3 ones you mentioned. For system requirements refer to the individual product pages.
Mylenium

DataGuard-Standby on IBM Power6 work with Production 10gR2 on IBM Power5?

Similar Messages

Maybe you are looking for