Datasource for material reservation data from SAP R/3 (RESB & RKPF table)

Hi,
How can i take material reservation data stored in SAP R/3 RESB and RKPF table. I can create generic data source and full upload of data is possible but how to manage daily delta. None of these table having change date to extract daily changed record to BI. Please suggest.
Please inform if any business content data source available for Reservation data?
Regards,
Manish

Hi,
Many times we face such situation, that we need to create a generic data source and there is no field to define delta.
In such situations you can go for psuedo delta.
Ask the client that at any point of time till which date will the data be changed.
Eg. the client may say that at max we will change last three months data.
In that case everytime you can do a full update and load only data of last three months.
Instead of date you can consider any field as per your requirement.
Regards,
Mansi

Similar Messages

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Method for Downloading Huge Data from SAP system

Hi All,
we need to download the huge data from one SAP system & then, need to migrate into another SAP system.
is there any better method, except downloading data through SE11/SE16 ? please advice.
Thanks
pabi

I have already done several system mergers, and we usually do not have the need to download data.
SAP can talk to SAP. with RFC and by using ALE/IDOC communication.
so it is possible to send e.g. material master with BD10 per IDOC from system A to system B.
you can define that the IDOC is collected, which means it is saved to a file on the application server of the receiving system.
you then can use LSMW and read this file with several hundred thousand of IDOCs as source.
Field mapping is easy if you use IDOC method for import, because then you have a 1:1 field mapping.
So you need only to focus on the few fields where the values changes from old to new system..

To Replicate Material DATA from SAP R/3 to SAP-BW

Hello,
I need the Material Master data from SAP R/3 in SAP BW. The material Data is to to moved in Info object: 0MATERIAL. In SAP R/3 the data for material is stored in table:MARA. Which Business content needs to be activated in BW.
Please give the step by step method to push this data from R/3 to BW.
What are the pre-requisites for the same.
Thanks for the information.
Regards,
Sumita

Hi
If you want to get data for material...
go to R/3 Side and tcode rsa5>find for 0material>you will get 0material_attr,0material_text and some hierarchy ..
Activate these data sources...
Goto BW side transaction RSA1-->replicate the data sources....
Go to Business content tab of the RSA1-->take grouping as 'in data flow before'
and select object type as info object in the left pane,find for 0material object.
drag and drop to right pane...click on install...now your 3 data sources(0material_attr and 0material_text and hierarchy will be assigned to 0material)..now you can create infopackage and load data(it is master data only)...
If you want to load transactional data,first of all you need to find out the cube and data sources to be loaded...once you find out your data sources,do same as above in r/3 side..and bw side take your required infocube as same as above...
If you want to get data specifically from mara table,Create a generic data source on table mara...
RSO2-->data source type transactional>give name and then click on create-->give description and application component to which this belongs to and give the name of the table(mara in table field) and then click on save...your generic data source is ready...go to rsa6 and there you can choose required fields for selection..
Then go to bw create infosource,cube and assign all these and load data...
Hope it helps
Thanks
Teja

How to Access data from SAP Content Server through SAP Portal

Hi Experts,
I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
I am trying to use this URL into the CMS address but it is not working
http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Is there any other procedure for acceesing the DATA from SAP content server. ?
Thanks,
Ahmad

If your Content Server is being used by DMS, then you can use the DMS Connector for KM. This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM. For more info see this:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
Andrew

Guidance for getting material master data from database table

Hi,
I need guidance to fetch following Material master data from the system data base.Please guide me for the same.
BASIC DATA1
BASIC DATA2
MRP1,2,3,4
WORK SCHEDULING
QUALITY MANAGEMENT
ACCOUNTING1
ACCOUNTING2
COSTING1,2
PURCHASING
PURCHASE ORDER TEXTSALES ORG1,2
SALES GENERAL/PLANT
PLANT DATA/STOR.1,2
WAREHOUSE MGMNT1,2
Also please tell me in general what is the reason for error while uploading the data into system using BAPi(AM talking about return message error).
Thank you.
Edited by: sanu debu on Feb 24, 2009 12:41 PM
Edited by: sanu debu on Feb 24, 2009 12:42 PM

Use BAPI's
BAPI_MATERIAL_GET_DETAIL
BAPI_MATERIAL_GETALL
BAPI_MATERIAL_GET_ALL

BW extraction settings for Billing Data from SAP ISU SYSTEM

Hi dudes,
iam currently extracting data from sap isu to bw systesm,but even after generation of many billingmaster dats i dnt find nay record to be extracted in bw system since some settings are missing in isu suystem for extarction process of Biliiing data,
Kindy help me in this regarding the settings to be made for succesful extraction from isu to bw
kr
raj

Dear Mr Memminger,
unfortunatly I was not able to find any hint about the same issue. As we have closed the FI-key we are waiting for any entry in RSA7. With RSA3 we get results but there are no entries in Delta Queue.
What I was surprised about is the fact that in SM58 there are some tRFC-entries for function module MEREP_DELTABO and target MAM_MI. That looks like error in delta handling. Although my colleague told me that is the integration to Mobile Asset Management and hence has nothing to do with the Delta handling problem.
But could give me a hint where to find the configuration setting for Delta queueing ?
Best regards,
Peter von Schubert
Edited by: Peter von Schubert on Jun 29, 2009 10:17 PM

Data security (Data from SAP BW) for AD users

Hi All,
I have a scenario.
BO env : Business Objects 3.1 Sp3
Sap Integration kit Sp3
My target is to implement AD SSO & also provide data security for data from SAP BW. Currently there are no roles & authorization defined in the sap System. My plan was
Step 1:- Implement AD SSO in Business Objects
Step 2: Map the AD users in SAP system
Step 3:- Crate roles in SAP System
Step 4:- Assign the users roles
Steps 5:- (Not sure) :- Map the users (Now in SAP) to BO & then aliases them with the users from AD.
Pleas let me know if this would be correct approach... if not please suggest.... I am kind of new to SAP BO integration with experience in BO admin

Step 1: Setup Windows AD SSO on your BOBJ server
Step 2: Import Windows AD groups in BO
Step 2- Setup Server-side SNC between BO and your SAP system
Step 3:- Create roles in SAP System and import them in BO
Step 4:- Assign SAP users the created roles
Step 5: - In the CMC create SAP aliases for your Windows AD accounts
Step 6: - Setup your reports and/or universe connections to use SSO.
For more information on server side SNC check the installation guide of the integration Kit.
Regards,
Stratos

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

Question on the flow of the data from SAP R/3 to SAP BW

hai bwgurus,
I am learner of sap bw ,i have small doubt in the extracting the data from sap r/3 to sap bw i.e
Extraction is always performed only on master data table not on transaction table , Am I right or wrong pls correct me with an detailed explanation ?
EmailId:[email protected]
Regards
Raju

Hi raju,
Extraction is always on Masterdata and as well as transaction data.
a transaction is event that ocurs on masters(like business example would be there will be a distributor who orders certain quantity of material so Disturbutor will be the companies sole distrubutor who comes under master and transaction data is the qty of materila he purchsed).All the transactions occur in SAP r/3 and that data will be replicated to BW for Data ware hosue and reporting.
Reg
Ram
""assign points if it helps""

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

Regarding Extracting Data from SAP CRM

Hi,
1) What are steps to extract data fron SAP CRM? I heared that we get different types of errors while extracting data from SAP CRm to BW when compared to BW
2) From which tables BW system is getting data when we extract data from SAP CRM Lead management, Opportunities, Activities and CIC?
Can anybody please let me know the answers for these ..........
Thanks in Advance,
Sowji
[email protected]

Hi Sowjanya,
Pls ch this link:
regarding bw crm extraction
CRM extraction
CRM Extraction
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/CRMAnalytics.htm
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Steps:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Datasources used in CRM-BW extraction are:
0crm_sales_act_1,
0BBP_STSMA_TEXT
0CRMFOCST_TEXT
0CRM_ACCPLN_ATTR
0CRM_ACCPLN_TEXT
0CRM_BILL_BLCK_TEXT
0CRM_CANC_PARTY_TEX
0CRM_CANRSN_TEXT
0CRM_CATEGORY_ATTR
0CRM_CATEGORY_TEXT
0CRM_CLASS_TEXT
0CRM_DECOTP_TEXT
0CRM_DECO_TEXT
0CRM_DIRECT_TXT
0CRM_ECROPT_TEXT
0CRM_FINCLASS_TEXT
0CRM_ITM_OBJ_TYPE_T
0CRM_ITM_TYPE_TEXT
0CRM_JRGUID_TEXT
0CRM_OBJ_TYPE_TEXT
0CRM_OPGUID_TEXT
There many more!
Check the datasources in rsa6 of crm system under CRM node. Documentation is available in SAP help.
*pls search SDN For more info*
*pls assign points if info is useful*
Regards
CSM reddy

Transfer Data from SAP system to non-SAP system

Hi all,
I want to send material no, site and price data from SAP system to non-SAP system. Would you tell me how can I do it
Thanks
Arif
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Oct 16, 2011 10:38 PM

Hi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh

Data from SAP BW

Hi All.
If the data is coming from SAP BW to SAP APO for DP then where the data will go ?
Can the data from SAP BW come directly to Planning Area. If so then how to see the data in Planning Area.
Thanks a lot in advance for your help,
Prabhat Sahay

Hi Kumar
Just to answer your question, in most cases, the data is pulled from BW cube to APO cube and from APO cube into the planning area if you have a separate standalone BW system other than APO BW. As Senthil as stated, BW first pulls the data from the datasource (ERP, legacy systems, flat files, etc), massages it and the converted/transformed data is sent to APO cubes. From APO cubes, the data can be sent to DP/SNP planning areas.
If you dont have a separate standlaone BW system, the data can be fetched into APO BW and then directly sent to Planning areas from APO cubes.
I hope this gives some clarity to your query. Let me know if you need further details.
Rgds, Sandeep
Edited by: Sandeep Budhiraja on Jul 1, 2010 1:51 AM

Message Type for Material Master Data Changes

Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]

Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa

Datasource for material reservation data from SAP R/3 (RESB & RKPF table)

Similar Messages

Maybe you are looking for