Datasource migration from 3.5 to 7

Hi Expert,
BI 7 was installed in the environment with datasource 3.5 actviated in source system. I am not sure do I need to migrate datasources from 3.5 to 7.0? Can experts please share with me on what are the features available in datasource 7.0? Will datasource 7.0 improve on delta loading? Is migration a must from datasources 3.5 to 7.0?
Your reply is much appreciated.
Thanks and regards,
Kang Ring

Hi,
As correctly pointed out, the datasource migration is not required unless you plan to achieve the following:
1. RDA (Real Time data acquisition)
2. Direct access to master data.
3. Remote activation of datasource (meaning from BW itself, you can acitvate DS in ECC)
However the only checkpoint is that if you are using hierarchies, those have to be loaded with 3.5 datasources as 7.0 does not support hierarchies. It is supported in 7.3
Also check the link for BI 7.0 new features.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm

Similar Messages

COPA Datasource Migration from 3.x to BI 7.0

Hi Experts,
I am facing an issue to restore the migrated COPA datasource from 3.5 to BI 7.0.
I am doing this migration as mentioned below
1.selected the 3.x datasource and in context menu used migrate
2.used option "with export"
3_.No transport request was requested_
4.successfully migrated.
I am not getting the option "restore datasource" in the context menu of the migrated datasource.
I want to use this option if the solution is not working in the new BI 7.0 flow.
Thank you in advance for your inputs.
PKC

Hi Raghavendra
Thank u for ur earlier response.
I have tried your proposal. But, could did not succeed.
My issue Is I am not getting the option "restore datasource" after the migration & transport request is not requested while migration and hence the migrated datasource is locked as local object.
Thank x
PKC

Datasource migration error from 3.5 to BI 7.0 - SP16

During Master data/text Datasource migration from 3.5 to BI 7.0 using export option, system migrates the datasource and shows error message 'The OLTP source 0COSTCENTER_ATTR for source system EC3150 not present', at the same replicate data source does not find a datasource. At the same time unable to replicate datasource. If you go outside the session and come back, everything works fine.
BI 7.0 system package level is SP16, upgrade to the system was done some time back.
Pls. share your experience in migration 3.5 datasources to BI 7.0 for both Master data and Transaction data.
Did any one experience similar issue like this?

I get the same error with a different object after upgrading a BI Business Content data source from 3.x to 7.0
It tells me "The OLTP source 2LIS_08TRTK for source system RD1CLNT230 not present".
Thx,
Gregg

Migrating from WebLogic v8.1.3 to v10.3: Datasources and Connection Pools

I took the liberty to migrate my OLD BEA WebLogic v8.1.3 domain (i.e. sample) to Oracle WebLogic v10.3. Everything appears to run smoothly BUT when I try to connect to the Hypersonic Database I had from the OLD environment, I get connection errors (i.e. weblogic.common.ResourceException). I can see from the NEW 10.3 environment that the migration utility creates two (2) datasources (sampleDS and samplePool). However, when clicking through the screens, I do not see how sampleDS refers to the samplePool out of the box from the migration utility. When I start the WebLogic domain with startWebLogic.cmd...here is the code to launch the actual DB instance:
cd hsqldb
start "Sample DB (HSQLDB)" %JAVA_HOME%\bin\java -classpath hsqldb.jar -Xms32m -Xmx128m org.hsqldb.Server -database sampleDB -port 15553 -silent false -trace false
cd ..
This works quite well and launches a window that has the following:
| Sample DB (HSQLDB)
| server.properties not found, using command line or default properties
| Opening database: sampleDB
| server.port =15553
| server.database =sampleDB
| server.silent =false
| HSQLDB server 1.7.1 is running
| Use SHUTDOWN to close normally, Use [CTRL] + [C] to abort abruptly
| Wed Jun 16 10:18:48 EDT 2010 Listening for connections ...
|_________________________________________________________
This is the right screen and confirms my database is up and running and waiting for connections. Somehow, when I migrated from 8.1 to 10.3 something is not configured correctly and my sampleDS is not properly leveraging the samplePool. Can anyone shed any light on this problem?
I have went through most of the posts and can not seem to understand what happens to the DS and Pools during the migration and specifically how do I reconnect the two to ensure that I can connect to the database. The app is up and running fine in WebLogic v10.3 but without the dB connection, I am stuck at the login screen.
Thanks for any help...

I took the liberty to migrate my OLD BEA WebLogic v8.1.3 domain (i.e. sample) to Oracle WebLogic v10.3. Everything appears to run smoothly BUT when I try to connect to the Hypersonic Database I had from the OLD environment, I get connection errors (i.e. weblogic.common.ResourceException). I can see from the NEW 10.3 environment that the migration utility creates two (2) datasources (sampleDS and samplePool). However, when clicking through the screens, I do not see how sampleDS refers to the samplePool out of the box from the migration utility. When I start the WebLogic domain with startWebLogic.cmd...here is the code to launch the actual DB instance:
cd hsqldb
start "Sample DB (HSQLDB)" %JAVA_HOME%\bin\java -classpath hsqldb.jar -Xms32m -Xmx128m org.hsqldb.Server -database sampleDB -port 15553 -silent false -trace false
cd ..
This works quite well and launches a window that has the following:
| Sample DB (HSQLDB)
| server.properties not found, using command line or default properties
| Opening database: sampleDB
| server.port =15553
| server.database =sampleDB
| server.silent =false
| HSQLDB server 1.7.1 is running
| Use SHUTDOWN to close normally, Use [CTRL] + [C] to abort abruptly
| Wed Jun 16 10:18:48 EDT 2010 Listening for connections ...
|_________________________________________________________
This is the right screen and confirms my database is up and running and waiting for connections. Somehow, when I migrated from 8.1 to 10.3 something is not configured correctly and my sampleDS is not properly leveraging the samplePool. Can anyone shed any light on this problem?
I have went through most of the posts and can not seem to understand what happens to the DS and Pools during the migration and specifically how do I reconnect the two to ensure that I can connect to the database. The app is up and running fine in WebLogic v10.3 but without the dB connection, I am stuck at the login screen.
Thanks for any help...

Migrated from SOA 10.1.3.1 to 10.1.35, Error While Deploying an Application

I have migrated from Application server 10.1.3.1 to 10.1.3.5 by applying patches. After that i have tried to deploy a application, I got this error
Operation failed with error: [resonance:resonance] - Exception creating EntityManagerFactory using PersistenceProvider class oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider for persistence unit
Please reply as soon as possible, It's very urgent , I am trying to resolve this issue for the past 1 week

The Error which is present in the logs as follows
*10/05/12 16:05:18 Stop process*
*10/05/12 16:06:58 Start process*
May 12, 2010 4:07:04 PM com.evermind.server.XMLDataSourcesConfig parseRootNode
INFO: Legacy datasource detected...attempting to convert to new syntax.
May 12, 2010 4:07:05 PM com.evermind.server.XMLApplicationServerConfig randomize
JtaAdminPassword
INFO: Updating JtaAdmin account
*10/05/12 16:07:17 Oracle Containers for J2EE 10g (10.1.3.5.0) initialized*
May 12, 2010 4:10:28 PM com.evermind.server.XMLDataSourcesConfig parseRootNode
INFO: Legacy datasource detected...attempting to convert to new syntax.
*10/05/12 16:10:41 WARNING: Code-source /home/oracle/product/j2ee/resonance/appli*
cations/resonance/resonance/WEB-INF/lib/toplink.jar (from WEB-INF/lib/ directory
in /home/oracle/product/j2ee/resonance/applications/resonance/resonance/WEB-INF
*/lib) has the same filename but is not identical to /home/oracle/product/toplink*
*/jlib/toplink.jar (from <code-source> (ignore manifest Class-Path) in META-INF/b*
oot.xml in /home/oracle/product/j2ee/home/oc4j.jar). If it contains different ve
rsions of the same classes, it will be masked as the latter is already visible i
n the search path of loader resonance.web.resonance:0.0.0.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
*10/05/12 16:10:59 oracle.oc4j.admin.internal.DeployerException: [resonance:reson*
ance] - Exception creating EntityManagerFactory using PersistenceProvider class
oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider for persistence
unit ResonanceUnit.
*10/05/12 16:10:59 at com.evermind.server.ejb.exception.DeploymentException*
*.exceptionCreatingEntityManagerFactory(DeploymentException.java:130)*
*10/05/12 16:10:59 at com.evermind.server.ejb.persistence.PersistenceUnitMa*
nagerImpl.createContainerEntityManagerFactory(PersistenceUnitManagerImpl.java:19
*7)*
*10/05/12 16:10:59 at com.evermind.server.ejb.persistence.PersistenceUnitMa*
nagerImpl.initializePersistenceUnit(PersistenceUnitManagerImpl.java:159)
*10/05/12 16:10:59 at com.evermind.server.ejb.persistence.PersistenceUnitManagerImpl.initialize(PersistenceUnitManagerIm*
pl.java:87)
*10/05/12 16:10:59 at com.evermind.server.http.HttpApplication.createDefaultPersistenceUnitManager(HttpApplication.java:*
*875)*
*10/05/12 16:10:59 at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:844)*
*10/05/12 16:10:59 at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:435)*
*10/05/12 16:10:59 at com.evermind.server.Application.getHttpApplication(Application.java:592)*
*10/05/12 16:10:59 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReferen*
ce(HttpSite.java:2280)
*10/05/12 16:10:59 at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:2199)*
*10/05/12 16:10:59 at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1833)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:304)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:120)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:92)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.ApplicationDeployer.bindWebApp(ApplicationDeployer.java:825)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:276)*
*10/05/12 16:10:59 at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:100)*
*10/05/12 16:10:59 at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52*
*10/05/12 16:10:59 at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)*
*10/05/12 16:10:59 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.j*
ava:298)
*10/05/12 16:10:59 at java.lang.Thread.run(Thread.java:595)*
*10/05/12 16:11:00 WARNING: DeployerRunnable.run [resonance:resonance] - Exception creating EntityManagerFactory using Persist*
enceProvider class oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider for persistence unit ResonanceUnit.oracle.
*oc4j.admin.internal.DeployerException: [resonance:resonance] - Exception creating EntityManagerFactory using PersistenceProvi*
der class oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider for persistence unit ResonanceUnit.
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:133)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:595)
Help me

Regarding Migration from Weblogic 10.3.0 to 10.3.3

We have configured a domain in our weblogic 10.3.0 installation. With in this domain A J2EE application has been deployed with datasources configuration, JAAS configuration.
Is it possible to migrate to Weblogic 10.3.3 without making any changes in our existing application configuration and domain setup?
If yes can any one please tell us what is the procedure?
Thanks in advance.

Hi,
first of all could you please clarify the need for migration from BO XI 3.0 to 3.1, as you can simply apply SP1 on top of 3.0 and it becomes 3.1.
if you have considered this and still needs to migrate, following are the 3 posible options.
1. Live-Live Migration - Import Wizard is the tool
2. BIAR - Live Migration - Import Wizard is the tool
Please reffer the Import Wizrd User guide for the option 1 and 2 link provided in the above thread.
Also the 3rd option is to perform the Databse and Filesystem copy, find the step below.
Launch CCM from the Destination System
Copy all of the file store from your Source implementation to the file store folder for your Destination implementation
Stop SIA - right click and select properties - Go to the Configuration tab - Click on the button to specify the data source -
Select "Copy Data from another Data Source". This will copy the data from your source to the Destination.
Regards,
Ramu.

Problem in mapping after migration from 3.x to 7.x infosource

HI Experts,
I have a problem while mapping the data source 2lis_03_bf to info cube 0ic_cs01.
we have a flow like this now after migration done.
Datasource->transfer rules->infosource->transformation->info cube
Now we dont require infosource and its respetive transformation, we are going to map directly from data source to info cube.but we have routines available in info cube related transformation.i.e. coming from infosource to info cube .
I would like to create a new transformation directly from Datasource to info cube but all the source fields are not available in target cube. How to map them.do i have to map all the target fields or i have to map according to the transfer rules target fields. what is the funda to make a transformation and mapping the source and target fields.
Could anyone please through some light here..
Thanks much in advance.

sunil kumar wrote:
Hi,
>
> As said above convert transfer rules to transformations (right click on transfer rules -> additional prop -> create transformation)
>
> Then right click on datasource -> Migrate
>
> After doing this, your datasource will be linked to Infocube directly with one transformations automatically.
>
> Regards,
> Sunil
Hi Sunil & Sravan,
THanks for ur quick reply.As you said click on transfer rules and create transformation.As i can see in my system i have a transformation from data source to infosource .i.e. starting with RSDS_ and then another transformation from info source to info cube.i.e. starting with TRCS_ . what i did was created a transformation by right click on info cube and by giving data source name as 2LIS_03_BF .this is a manual transformation i am mapping manually.Is this a correct way? Please tell me how to do it.
as i have to do this immediately.
Thanks in advance

Migration from 3.5.1 to 9.3.0

Hi,
I am also trying to migrate from 3.5.1 to 9.30 and getting an error unsuceesful log on.
I have instralled 3.5.1 on a different machine Windows server 2003 and Oracle 9i.
I ahve installed 9.3.0 on other machine and Oracle 10G.
While creating the application on 3.5.1 it has taken the user ge_adm ( which is also my windows NT login).
Now when i am trying to create user on 3.5.1, it comes with error invalid user name. Its not taking admin as user id also.
Now I am trying these steps for migration:
1. Copy the HspJSHome.properties file that you backed up before installing Planning 9.3.0.1
to the same folder that contains the new PlanningSystemDB.properties file. The location is
based on the application server being used.
2.Run the PropFileMig utility (PropFileMig.cmd) located in <drive letter>:
\Hyperion\Planning\Utils
Launch the Hyperion Configuration Utility. Under Planning, perform the Edit Datasource
task for each application you want to upgrade.
4. Restart the Planning application server and log on to Planning using this URL: http://
<hostname>:8300/HyperionPlanning/LogOn.jsp.
these 4 steps ran succesfully. However I have started facing problem from 5th step onwards.
Select the application you want to migrate from the drop-down list of applications. A
message is displayed that the application version needs to be migrated.
6. Enter your username and password again and select the application. Then click Migrate
(note that the LogOn button changed to Migrate). The application is migrated to the 9.3.0.1
release and you are logged on.
No migration button is there and I am not able to login in to the migrated application.
Please let me know what should I do?
Need urgent help.
Any help would be highly appreciated.
Thanks and Regards,
Pankaj Mehta.

Hi,
The steps I usually take are (I am basing this on version 9.3.1 though but I dont think it differs that much) :-
Create a fresh planning application on version 9.3.0 make sure the admin is the same name as your old 3.5.1 planning app
Go into the oracle tables for the planning app and look at table HSP_USERS, store the SID value against user 50001
Go into the oracle planning system tables and HSPSYS_APPLICATION, clear out the version field for the application in question.
Stop Planning
Drop your 9.3.0 Planning App schema and Copy your old 3.5.1 planning oracle schema into the same locatiion
Go into the HSP_USERS table and update the SID for user id 50001
Start planning
Go to planning web and you should see your application when you try and log in it should take you to a migrate screen.
Hope this is a start.
Cheers
John

Migration from Access to Oracle 10g (Problem with migration wizard)

Hi
I have an access database which I want to migrate to Oracle DB.
I have created 2 connections.
1. Access connection with the source database
2. Oracle connection.
I have associated the oracle connection to the repository.
When I go through 'MIGRATION WIZARD' process. I am not able to view the source database file while capturing. Tried it several times.
Need a help in this
Regards,
Arjun
Edited by: 919650 on Mar 9, 2012 2:47 AM

Arjun,
you cannot do an online migration with MS Access as you can do with other foreign datasources. You can only do an offline migration.
The first step that you need to do is to call the Microsoft Access Exporter. Click on Tools - Migration - Microsoft Access Exporter and chose the exporter of the MS Access version that you are using.
The exporter creates an xml file for you. After the exporter has finished you can do the migration, click on Tools - Migration - Migrate, but in Step 4 please select "Offline", and then you can select the xml file that the exporter has created. The following steps in the Migration assistant are then doing the migration for you.
You might also want to read the chapter "Before Migrating From Microsoft Access" in the online help of SQL Developer.
Regards
Wolfgang

Regarding Migration from Testing to Development

Hi All,
I am going to migrate from Windows 32-bit to unix 64 bit. I am using hyperion 9.3.1. I dont know, how to migrate from windows 32 bit to unix 64 bit.
I want to migrate Planning, Essbase and Shared Services. This is the first time, i am doing the migration. Please guide me in this situation. Its very urgent for me.
My Doubts
1) What are the files(In planning, essbase and shared Services) i have to copy for the migration?
2) What are the steps, i have to follow during the migration?
Please guide me in this situation. If u have any documents for migration, please share with me. This is my mail id : [email protected]
Thanks,
Lakshmi

Hi,
I am doing the migration for Planning. I am following the below stepts for migration. I am stuck in the middle.
The below are some steps to use in Migrating .
1. Create a new database on Production RDBMS Server for your planning application.
I created a new database (MIGRDB)
2. Configure a data source on Production Planning Server.
I configured the datasource
3. Create fresh planning application on Production Server and Ensure the admin is the same as your planning application on Development Server.
I created the new planning application in developement server
4. Go into the database tables for the planning app on Production Server and look at table HSP_USERS; store the SID value against user 50001.
How to find the SID for the new database? Here i want to replace the 50001 with new database sid value(step 1 - MIGRDB)
Please guide me in this situation.
Thanks,
Lakshmi

EJB perfomance issue while migrating from weblogic 10.0 to 10.3

Hi,
I have an EJB service which I am migrating from 10.0 to 10.3
The service contains an entityManager.find() method which takes less than 2 secs to execute on 10.0 and more than 10 secs on 10.3.
The code snippet and the log trace are as below --
Code:
      logger.debug("Looking up Person for id " + personId);
   Person info = entityMngr.find(Person.class, personId);
    if(info != null) {
        logger.debug("Found Person" + info.getFirstName() + " " + info.getLastName() + " for id " + personId);
log entries:
05/31/2010 *02:35:25,197* DEBUG persistence.bean.PersistenceService [[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)':822] - Looking up Person for id 12014
05/31/2010 *02:35:36,272* DEBUG persistence.bean.PersistenceService [[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)':829] - Found Person Vitasha Harinarine for id 12014
Could somebody please help me debugging this issue? The code has not changed before migrating to 10.3. I have checked that the datasources on both environments are exactly the same.
Any help would be greatly appreciated.
Thanks in advance!
Regards,
Nishtha

Don't do that. The ClassLoader used to manage web components is the child of the classloader used to manage EJB components - the servlet can use EJB classes, the EJB's cannot use web classes.
This is also very poor practice as it couples the business logic layers of you system to the presentation - only the reverse should be done. WLS 6.0 is behaving appropriately.
Chuck

Migrating from WLS 8.1 SP5 to Sp6

We have successfully runned WLS 8.1 SP5
When we were migrating from SP5 to SP6 in starting logs had been occured strange errors:
<Jul 6, 2007 3:01:49 PM EEST> <Error> <JDBC> <BEA-001263> <Data Source named edx.servman.databasePool should not point to the Pool edxUserConnectionPool, Poo
l edxUserConnectionPool has already been referenced by the another TxDataSource.>
<Jul 6, 2007 3:01:49 PM EEST> <Error> <JDBC> <BEA-001263> <Data Source named edx.user.databasePool should not point to the Pool edxUserConnectionPool, Pool e
dxUserConnectionPool has already been referenced by the another TxDataSource.>
<Jul 6, 2007 3:01:49 PM EEST> <Error> <JDBC> <BEA-001263> <Data Source named jdbc.ecs_serial_trans should not point to the Pool edxUserConnectionPool, Pool e
dxUserConnectionPool has already been referenced by the another TxDataSource.>
All these DSources have been running on SP5 on the same pool. But this config doesn't work on SP6. What is issue?

Anton Gavazuk wrote:
We have successfully runned WLS 8.1 SP5
When we were migrating from SP5 to SP6 in starting logs had been occured strange errors:
<Jul 6, 2007 3:01:49 PM EEST> <Error> <JDBC> <BEA-001263> <Data Source named edx.servman.databasePool should not point to the Pool edxUserConnectionPool, Poo
l edxUserConnectionPool has already been referenced by the another TxDataSource.>
<Jul 6, 2007 3:01:49 PM EEST> <Error> <JDBC> <BEA-001263> <Data Source named edx.user.databasePool should not point to the Pool edxUserConnectionPool, Pool e
dxUserConnectionPool has already been referenced by the another TxDataSource.>
<Jul 6, 2007 3:01:49 PM EEST> <Error> <JDBC> <BEA-001263> <Data Source named jdbc.ecs_serial_trans should not point to the Pool edxUserConnectionPool, Pool e
dxUserConnectionPool has already been referenced by the another TxDataSource.>
All these DSources have been running on SP5 on the same pool. But this config doesn't work on SP6. What is issue?Hi. This is a known issue with 81sp6. Ask support for the patch
for CR308071. We document that it is forbidden to have multiple
XA datasources pointing to the same pool, and we now enforce that,
but the bug is that we were also preventing mulitple datasources
to non-XA pools as well.
Joe

Migration from 3.x to 7.0 - Approach

Hello -
Want to get a confirmation:
1/ If there is no migration from 3.x to 7.0
   - Cannot use Transformations
   - Cannot us DTP
2/ If there is a migration, then
- Have to reconstruct Datasource to Target Mapping Entirely
    (e.g., 0MATERIAL InfoObjects to 0MATERIAL_ATTR Datasource)
     The R/3 field mapping to InfoObjects has to be completely redone, since there
     is no proposal
- What do most of the experienced folks do to ease the effort of reconstruction
3/ I understand that if there is no migration, cannot use RDA , remote activation of DS, error stack, and the items mentioned in point # 1, but these are nic to haves. Do you see a real advantage to the migration
Thanks - and points will be awarded
- abhi

Hello:
I think you are referring to DataSource migration?
1 - You CAN use transformations and you CAN use DTP without migrating the DataSource, this is known as an "emulated DataSource".
2 - NO "reconstruction" is required. Keep in mind that if you migrate a DataSource to 7.0 form, that transfer rules are deleted. Therefore, before DataSource migration you should use the "create transformation" functionality from existing transfer rules. This functionality will generate a proposed transformation, including proposed ABAP OO routines where ABAP routines had existed previously.
3 - you can use error stack with an emulated DataSource. In general, migrating to the new DataSource form ensures you have completely moved to the new dataflow concept in a consistent manner.   The new dataflow has good advantages from a performance standpoint, in that you can parallelize the data load. The error stack is a big advantage from a data quality standpoint. The overall approach using DTP's is a step forward in that the dataflow occurs in a more transparent manner in process chains and monitoring.
Thanks for any points you choose to assign.
Best Regards -
Ron Silberstein
SAP

Planning Migration from Development Server to Testing Server

Hi All,
I am doing migration from development env to testing env. I am stuck in the middle of the migration. Anyone please guide me in this situation. Its very urgent for me. I am following below steps for the planning migration
1. Create a new database on Production RDBMS Server for your planning application.
I created the new database for my planning application.
2. Configure a data source on Production Planning Server.
     I configured the new datasource on planning.
3. Create fresh planning application on Production Server and Ensure the admin is the same as your planning application on Development Server.
     I created the new planning application on production server. Its working fine with admin login.
4. Go into the database tables for the planning app on Production Server and look at table HSP_USERS; store the SID value against user 50001.
     I save the SID value against 50001 in a notepad
5. Go into the database planning system tables on Production Server and HSPSYS_APPLICATION, clear out the version field for the application you have created.
     I removed the version for the application i created
6. Stop Planning.
     I stopped the planning services
7. Restore the planning application database on Development over the one created in the first step (to the Production Server Database).
     In this steps only, i am facing diffculities.
     How to take the backup of development database? (Here, i want to the take the database backup of planning application schema or entire oracle databat in development server)
     How to restore to testing env database
Please anyone guide me in this situtation. Please......
8. Go into the HSP_USERS table and update the SID for user id 50001
9. Start planning
10. Go to planning web and you should see your application when you try and log in it should take you to a migrate screen.
11. If you are requiring to migrate users as well, you will have to make sure you create them in Shared Services and then use the updateusers utility in the planning bin directory.
Thanks,
Lakshmi

Hi Mars,
Thanks for your reply. I did the same as you specified. I used Imp instead of import, exp instead of export.
7. Restore the planning application database on Development over the one created in the first step (to the Production Server Database).
I restored the Planning dmp here
8. Go into the HSP_USERS table and update the SID for user id 50001
Here, SID remains the same after restore the backup from the development server(SID same for Development and testing Server)
9. Start planning
I started the Planning Services.
10. Go to planning web and you should see your application when you try and log in it should take you to a migrate screen
I am facing problem here.
While login into planning application, its not redirect to migrate screen. Its normally login to the application
Thanks,
Lakshmi

Creation of domain issues - migration from weblogic 10.3.0 to 10.3.5 versio

Hello,
i would like to kindly ask for a help with following issue:
Basically we are migrating from the 10.3.0 to the 10.3.5 version. We are building the domain using the template in "silent mode". And when i try to create the domain with new weblogic 10.3.5 im getting some errors.
The command to run the creation of the domain is following:
${WL_HOME}/common/bin/config.sh -mode=silent -silent_script=${SILENT_SCRIPT} -log=${WLLOGFILE} >> ${LOGFILE} 2>&1
returnCode=$?
SILENT_SCRIPT contains following commands:
read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar";
write domain to "/local/wg372/BM/appl/BmDomain";
set OverwriteDomain "true";
close template;
When i setup new env(solaris) with weblogic 10.3.5 im getting following error when the silent_script command (*write domain to "/local/wg372/BM/appl/BmDomain";*) is executed:
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar"
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "/local/wg372/BM/appl/BmDomain"
2011-07-18 16:53:00,505 ERROR [runScript] com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask - There was an error executing the script: /local/wg372/BM/appl/installer/silent_script
java.lang.NullPointerException
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.buildSecurityInfo(SecurityGenerateLDIFT.java:460)
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.<init>(SecurityGenerateLDIFT.java:119)
     at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:718)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
     at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
     at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:35)
     at com.oracle.cie.wizard.domain.helpers.Executor.runSilentScript(Executor.java:68)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:551)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:335)
     at com.oracle.cie.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
     at java.lang.Thread.run(Thread.java:662)
In Windows env im getting following error:
create.domain:
[exec] -mode="silent" -silent_script=J:/_dev/build/installer/silent_script
[exec] << read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] >> succeed: read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] << write Domain to "J:/_dev/build/BmDomain"
[exec] CFGFWK-60550: Script execution aborted. The script may contain an error.
[exec] null
CFGFWK-60550: - doc says
CFGFWK-60550: Script execution aborted. The script may contain an error.
Cause:
Action:
Level: 1
Type: ERROR
Impact: Configuration
I tried to google for this issue, look into the weblogic documentation but with no luck.
So i would like to kindly ask, if anyone of you perhaps could give me a hint/advise with this problem.
Thanks in advance.

Hi,
thanks for the reply but im not sure if we are talking about the same thing. What i need is to upgrade the weblogic "DOMAIN" not the weblogic installation itself.
Anyway,
after some googling and testing im again stucked with another issue:
1. First i have created the old doman (10.3.0)
2. Then i have tested the domain with the new weblogic version 10.3.5 - as it should be (and is) compatible within those 2 versions
---> worked fine
3. Then via offline WLST(of weblogic 10.3.5) i have managed to create new template with command writeTemplate(nameOfTemplate.jar)
4. But when i try to create the new domain with the new template via WLST(of weblogic 10.3.5) im again stucked (im able to read the template in wlst but not able to writeDomain ) - error:
wls:/offline> readTemplate('/home/wg372/tmp/new_template.jar')
wls:/offline/BmDomain>writeDomain('/home/wg372/tmp/new_domain')
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/BmDomain>dumpStack()
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.writeDomain$15(/var/tmp/WLSTOfflineIni6651397525640719781.py:71)
at org.python.pycode._pyx3.call_function(/var/tmp/WLSTOfflineIni6651397525640719781.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx24.f$0(<console>:1)
at org.python.pycode._pyx24.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:795)
... 29 more
I tried to have a look around for the "The application location must have write permission." problem but again with no luck.
Furthemore when i try to do the same with old domain template, with old version of WLST (of weblogic 10.3.0), i have no problems with creating of the domain.
Any ideas?
Ill keep you updated :-)

Datasource migration from 3.5 to 7

Similar Messages

Maybe you are looking for