Date Picker not allowing to capture time

Hello Friends,
I am trying to create a tabular form on a table[create SQL as below].
CREATE TABLE "JOB_RUN_DETAILS"
   (     "JOB_NAME" VARCHAR2(100),
     "SCH_RUN_DATE" DATE,
     "START_DATE" DATE,
     "END_DATE" DATE,
     "STATUS" VARCHAR2(100),
     "ID" NUMBER NOT NULL ENABLE
/My idea of the tabular form is to allow entry of time both hours and minutes from the date picker along with date for <b>"START_DATE", "END_DATE" </b> items.
But I dont see a possibility to do that for hours and minutes. But I remember having seen this in Apex 3.2, not sure if I missed some thing while page making or this feature of Date Picker is left intentionally in the new release.
Please share any ideas you have.
Thanks,
Chaitu.

My understanding is you are trying to create a Tabular form using the Table which you specified, you are expecting time part to be displayed in the Date Picker column ?.
The Time part of hours and Minutes will be displayed based on the format mask used for the Application or the item. if the format mask is DD-MM-YYYY HH24:MI then you will see the hour and minute part with the Date Picker.

Similar Messages

ICal Week view, Date is not aligned with the Time(schedule) of each date

Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

Hi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

In which IT To Date is not allowed & not having more than one record

Hi all,
Could you please tell me "In which IT To Date is not allowed & not having more than one record ?"
Thanks in advance
Regards,
Asiya

Hi,
Just go through IT0003 and see if it fulfills the requirements or not.
Param

Pocket Data: Connection not allowed!

I tried to use WLAN to connect to internet suuccessfully. When I use 3G to connect to internet, I get an error message "Pocket Data: Connection not allowed!". Can someone advise what does it mean - fault at operator side or phone settings.
Thanks!

Hi scottxe
You don't mention whether this is brand new phone with a new network provider, as the GPRS packet data server connection has to be activated; this sometimes takes 1-2 days!
Happy to have helped forum in a small way with a Support Ratio = 37.0

PO data should not allow to change

Dear Forums,
Can any body so kind to find a way in solve the following business requirement:
In my client business scenario the PR only subjected to release. PO against the PR not go for any release.
My client require the user should not allow to change the data of PO which is pick from PR (PO created reference to PR).
For example : user should not allow to change the quantity in the PO which capture from PR while creating the PO reference to PR.
Your early reply should highly appreciated.
Regards,
sp sahu

Hi,
there is no standard way of doing this and I am not sure that it should be done.
How are you going to be able to correct errors and set deletion flags, delivery completerd flags etc. if the PO is blocked for change?
If you really want to do this then I would create a new document type that has the requisition reference field set to mandatory. This means that the document tyoe can ONLY be used for creating POs that refer to requisitions. Then change the field settings for this new PO document to display only in ME22n.
That way, POs that don't reference a requisition will use another PO document type that has the fields set to open for input in ME22n.
Would this do what you need to do?
You should also look at the EVO and EFB parameters and config (in the Purcashing config menu under environment data > Default values for buyers (the EVO paraneters are maintained here) The EFB parameter (the more powerful settings) is configured in the purchasing > Authorisation Management > Define function authorisations for buyers)
Read the configuration text help and note the flags and what they do.
Steve B

Date picker not working in explorer

Hi, I am user explorer for my browsing the Bank website, secured account. I could not select the date from the datepicker, But in other android phone it is possible.
My Nokia lumia 820 is not allowing me to pick the date

Hi Ragu,
The forum is to discuss the problem about HTML, CSS and JavaScript in IE. If your code doesn’t work in IE, please post here. But if it doesn’t work in lumia 820, I recommend you post thread on Windows Phone forum for effective response. Thank you for understanding.
Please refer to the following link.
http://social.msdn.microsoft.com/Forums/wpapps/en-us/home?category=wpapps%2Cwpdev%2Cwindowsphone%2Cwindowsmobile%2Cwindowsphonezh.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Default value of date picker not showing in sql query

Hi,
I have a tabular form page with a query similar to the following:
select emp_name, salary from emp_table where trunc(hire_date)=trunc(to_date(:P42_START_DATE))
where P42_START_DATE is the name of a date picker item.
I set the source type of the date picker to be "Only when current value in session state is null" and the value to be "select trunc(next_day(sysdate,'MON')-7) from dual;" - basically the monday of the current week. I set the sequence of the date picker to be 5, and the sequence of the region to be 10. Now, when I open this page, no data gets pulled. I checked the page source, and the value of the date picker input is being set to "17-NOV-2008", but it somehow isn't reflected in the sql query.
Data does get retrieved if I manually set the date in the date picker, but I'd like it to default to the monday of the current week. What am I doing wrong?
Thanks

nope, still same problem.
I used javascript alerts to help debug, and here might be some useful information.
The computation to set the value of :P42_START_DATE is set to run "before header", but when I put this following javascript in the header:
<script language="javascript">
var c = $v('P42_START_DATE');
alert(c);
</script>
the alert box is blank (ie :P42_START_DATE is empty). Putting the same exact script in the footer gives 24-Nov-2008 in the alert box. Now, the SQL query is run sometime after the first alert and before the second alert, I believe. Why would the value of :P42_START_DATE not be getting set at the correct time?
P42_START_DATE is a date picker item that belongs to the region SCHEDULE (which is where the sql query is). I set the sequence of the region to 10, and the sequence of the date picker and computation to be 5 and 6. Even so, does this mean that the sql query is executing before the call to the computation, because the region needs to be created before any items can be created that belong to the region?

Does not allow to set time characteristics while performing Partition

I had loaded the monthly inventory cube without setting any partition.
Now, when I tried to partition the cube thru RSDCUBE >> Change >> DB performance >> Partition, the time characteristic is greyed off and does not allow to set.
Is it becuase the cube had been loaded? Can I perform the partition now that I had compressed the request in the cube?

Yes you are correct....You want to modify an InfoCube into which data has already been loaded. You use remodeling to change the structure of the object without losing data.
You use partitioning to split the total dataset for an InfoProvider into several, smaller, physically independent and redundancy-free units. This separation improves system performance when you analyze data delete data from the InfoProvider.
You can only partition a dataset using one of the two partitioning criteria u2018calendar monthu2019 (0CALMONTH) or u2018fiscal year/period (0FISCPER). At least one of the two InfoObjects must be contained in the InfoProvider.
But you are trying to partition the cube which already has data so...You choose Repartitioning...
Repartitioning can be useful if you have already loaded data to your InfoCube, and:
●      You did not partition the InfoCube when you created it.
●      You loaded more data into your InfoCube than you had planned when you partitioned it.
●      You did not choose a long enough period of time for partitioning.
●      Some partitions contain no data or little data due to data archiving over a period of time.
Let me know if you need help with the steps to perform repartitioning

Date Picker - only allow future dates?

Does anyone know of a way to control the date picker to only allow the selection of future dates? I would like to force my users to use the date picker, but will need to shade out or grey-out dates less than sysdate+3. This will be used for scheduling payments in the future and should not allow a user to pick a past date or a date within two future days of the current date.
Thanks in advance for your help,
Todd

Vikas,
I have followed the instructions on that page, but I'm a little unsure about one step. The instructions say, In the HTML Header of the Page Attributes enter "INCLUDE_DHTML_CALENDAR_SCRIPTS"
My current HTML Header of the Page Attributes has this code:
<script language="JavaScript" type="text/javascript">
--(this is commented out) htmldb_delete_message='"DELETE_CONFIRM_MSG"';
</script>
I'm not sure where to add the "INCLUDE_DHTML_CALENDAR_SCRIPTS" text. Do I need something before or after that quoted string?
I'm getting the following error message when I run the page:
ORA-06550: line 22, column 6: PLS-00103: Encountered the symbol ";" when expecting one of the following: begin case declare end exception exit for goto if loop mod null pragma raise return select update while with << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe The symbol "exit" was substituted for ";" to continue.
Error ERR-2904 Unable to set shortcut value.
OK

Date picker not showing for datetime type in advanced search page

Hi,
I have an advanced search page in my SharePoint 2013 site. There is a property which is of type datetime. For that I'm not getting a date picker. I don't know why this is not working. It is showing the date picker in SharePoint 2010 but not in 2013. Can
anyone help me on this? Thanks in advance.
Thanks,
Jawahar
Im searching more abt me...........

A date picker was never supported in Advanced Search.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Date picker not showing up in iOS Reader with multiple dates?

Hi all,
The date picker for iOS shows up for forms with a single date box. However, with multiple forms, the keyboard pops up instead of the date picker. It still handles correctly formatting-wise, but it's become a bit of hassle with having to type the date instead of simply filling out today. Is this a bug or by design?

Hi jncasino,
We are not able to reproduce this issue at our end. Could you please share the file having this issue to help us investigate and fix this issue?
Thanks,
-Shilpi

Date picker not displayed--OAF

Hi
I have a messagetextinput field on my page which is intially rendered false.
In process request i am setting the the rendered property to true and datatype to DATE by coding as below:
OAMessageTextInputBean bean1 =
(OAMessageTextInputBean)webBean.findChildRecursive("Col");
bean1.setRendered(true);
bean1.setDataType("DATE");
but still when the page opens messagetextinput field is not showing the date picker.
Kindly guide me to resolve the issue.
Thanks.
Manish

Hi,
Instead of setting the datatype to DATE programatically, can u set that in you page itself using property inspector.
In PR, just set the rendered property to true.
--Sushant

Date Picker not working in Crystal XI Developer

Post Author: laksh_hari
CA Forum: Crystal Reports
Hi,
I recently purchased Crystal Reports XI and am running it on Windows Vista.. The Date picker control does not popup for any date parameter fields.. Can you please let me know why it does that and how I can rectify that?

hi,
I'm able to do this as I chose the validation type JAVA.
Rgds,
Shahnawaz
Edited by: 907938 on Feb 24, 2012 5:22 AM

Date picker not working in new DIF R12.1.3

hi,
I've created a date picker as per guidelined in dev guide. but when my doc gets created it's not showing it.
Any help?
Rgds,
Shahnawaz

hi,
I'm able to do this as I chose the validation type JAVA.
Rgds,
Shahnawaz
Edited by: 907938 on Feb 24, 2012 5:22 AM

Update using date picker not working?

Hello,
This might be simple for a lot of people here but I can't get it going...
The problem is that, I have a tabular form with 1 text field and 1 date field. I am using a PL/SQL anonymous block transaction to insert/update a view based on the field values. Insert is fine but update on the date field is not working - but no errors. The date field is a date picker('DD-MON-YYYY') column. Kindly help check the problem. Thank you.
Below are some codes that might be helpful
-- update statement in the block
update del_ignore_conchold_v
set     conc_prog_name = apex_application.g_f03(v_row)
       ,remove_entry_date = apex_application.g_f04(v_row)
where   row_id = apex_application.g_f02(v_row);
-- update trigger on the view
CREATE OR REPLACE TRIGGER APPS_TEST.del_ignore_conchold_v_upd_tr
   instead of update
   ON APPS_TEST.DEL_IGNORE_CONCHOLD_V referencing new as new old as old
   for each row
begin
   update apps.del_ignore_conchold_tbl@PROD
      set conc_prog_name = :new.conc_prog_name,
          remove_entry_date = :new.remove_entry_date
    where conc_prog_name = :old.conc_prog_name
    and   remove_entry_date = :old.remove_entry_date;
end;Thanks,
Rownald

Hello,
The output for g_f03(v_row) and g_f04(v_row) appear to be fine. g_f03 only has the actual text and g_f04 has the date(from date picker field) with format like 22-OCT-2009. Below is an excerpt of the code & debug log - might be of help.
Thanks as always.
        if apex_application.g_f02(v_row) is not null then
            wwv_flow.debug('MY PROCESS: g_f02 ' || apex_application.g_f02(v_row));
            wwv_flow.debug('MY PROCESS: g_f03 ' || apex_application.g_f03(v_row));
            wwv_flow.debug('MY PROCESS: g_f04 ' || apex_application.g_f04(v_row));
            -- update stmt
            update del_ignore_conchold_v
            set     conc_prog_name = apex_application.g_f03(v_row)
                   ,remove_entry_date = apex_application.g_f04(v_row)
            where   row_id = apex_application.g_f02(v_row);
            wwv_flow.debug('MY PROCESS: g_f03 ' || apex_application.g_f03(v_row));
            wwv_flow.debug('MY PROCESS: g_f04 ' || apex_application.g_f04(v_row));
-- debug log --
0.09: ...Do not run process "AddRows", process point=AFTER_SUBMIT, condition type=, when button pressed=ADD
0.09: ...Process "Save_Transaction": PLSQL (AFTER_SUBMIT) declare v_row binary_integer; begin for i in 1..apex_application.g_f01.count loop v_row := apex_application.g_f01(i); if apex_application.g_f02(v_row) is not null then wwv_flow.debug('MY PROCESS: g_f02 ' || apex_appli
0.09: MY PROCESS: g_f02 AAE2DlAHKAAAA0qAAB
0.10: MY PROCESS: g_f03 Delete data from temporary table
0.10: MY PROCESS: g_f04 22-OCT-2009
0.11: MY PROCESS: g_f03 Delete data from temporary table
0.11: MY PROCESS: g_f04 22-OCT-2009
0.15: ...Process "Reset Pagination": RESET_PAGINATION (AFTER_SUBMIT) reset_pagination
0.15: Branch point: AFTER_PROCESSINGRownald

Date Picker not allowing to capture time

Similar Messages

Maybe you are looking for