Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

Similar Messages

Data model 0G: No authorization for entity type Account (Company Code) - activity Display

Hello Expert,
I have a problem with authorization in MDG-F.
I want to create Account with Collective processing. After, entered Entity type, Edition and Chart of account, Blocking message "Data model 0G: No authorization for entity type Account (Company Code) - activity Display" is displayed.
But, i checked in PFCG transaction, for this user profil, activity are : create or generate, Change and display. So, for me , it is correct.
Please, check screen shot below :
Blocking message :
and in PFCG transaction
Could you help me to solve this point?
Kind regards,
Heri RAOELISON

Hi Heri,
the system behavior is correct. The account in company code consists of three entity types:
1) COA - Chart of Accounts (Type 3)
2) ACCOUNT - Account (A-Segment, related to ECC table SKA1, Type 1)
3) ACCCCDET - Account in Company Code (B-Segment, releated to ECC table SKB1, Type 1).
3) includes 1) and 2) whereas 2) includes 1). If you grant authorization only for 3) but not for 1) and 2), you cannot do anything.
Best regards
Michael

Provision account key missing for condition type FRA1 in schema ZIMPOR

Hi,
While maintaining the condition value in PO, the below message displayed.
"Provision account key missing for condition type FRA1 in schema ZIMPOR"
Thanks and regards
Murugesan

Go to
Spro>MM>Pur>Conditions>Define Price Determination Process>Define Calculation Schema
here select ZIMP and click control data
in that maintain "Account key" for FRA1 cond type in the Account key Column..
(Second column from right side)

Provision account key missing for condition type FRB1 in schema

Provision account key missing for condition type FRB1 in schema is the error coming while i enter freight value at PO
how to set this
krishna

Hi Krishna,
Go to Pricing procedure using M/08 , here against the Freight condition type ( FB1), enter the accrual key ( ex. FRE)and account key ( ex. FR1 or FR2).
After saving to the customizing request, again create the PO.
Thanks & Regards,
Amjad

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay.

Provision account key missing for condition type ZPFV in schema ZUELOC

Hi
We have defined the condition type ZPFV for freight value & mentioning the same while creating po and in past we had prepared so many po by using this.
we hv not change any thing & today we are getting message " Provision account key missing for condition type ZPFV in schema ZUELOC"
What to do???????
Thanks
Ketan Vala

hi..
If the accrual is ticked in condition type in M/06, it should have an account key assigned to the condition type in the pricing procedure in M/08.
Go to your contion type ZPFV and check whether you have checked Accrual or not..
then go to ur pricing procedure ZUELOC and check the last two colums for your condito type i.e. Account Key and Accrual Key.
Maintain these..
try this if it works.
Thanks...

Range Number Missing for invoice type

Dear Experts,
I am getting an error "Range number missing for invoice type FR01 in Sls Org F2" while creating Invoice
FR01 is my sales Organisation F2 is my billing document type. I couldn't able to understand where exactly i missed the configuration
Number Range is rightly assigned to the Billing Type.
Can anyone help me in finding the solution.
Thanks and Regards
Yoganand

Hi
Standard message is :Range number missing for invoice type &1 in SlsOrg &2
And you are getting: "Range number missing for invoice type FR01 in Sls Org F2"
there is swaping between invoice type and sale Org in your message.
Also In message class only text has been maintain not type. Type will be decided by code written as runtime.
Hence take help of your ABAPer and debugg the program to find out exact location of this error.
try and revert

Sign of payment is missing for update type SE3005

Hi
When I am trying to create a security transaction the following error is displayed.
- Sign of payment is missing for update type SE3005.
But, when I remove tick from the check box for CM relevant I am able to create the same. The path is CFM - TM - General Settings - Link to Cash Management - Specify update types for Cash Management.
Can someone clarify on this.
with best wishes,
Mahesh

Hi Lorenz,
Thanks for the Response. But we have not configured the Payment Reporting functionality for any of our Treasury products.
However the issue has got resolved as the configuration settings were missing in :
Treasury and Risk Management >Transaction Manager > Securities > Position Management > Securities Account Management > Update Types > Specify Update Types for Securities Account Management.
Now it has been configured for update type SAM1800.
Regards,
Eesha.

The customizing navigation for transaction type 165

Hi All,
Could anyone show me the customizing navigation for transaction type 165?
Thanks a lot

Hi,
transaction AO73:
CU:
-> Asset Accounting
-> Transactions
-> Acquisitions
-> Define Transaction Types for Acquisitions
regards Bernhard

Reverse posting key specification is missing for posting key 80

A FI document was wrongly posted with posting key "80" instead of 40. And now we are not able to reverse it. System is giving following error --
"Reverse posting key specification is missing for posting key 80"
Document posted as
50     207200     CASH - MAIN-O.H.     762.00-
40     410120     CONVEYANCE EXPENSES     702.00
<b>80     402440     STAFF WELFARE EXPENS     60.00</b>
Please suggest
Thanks & Regards

Hi,
Go to OB41, select the posting key 80 and in the third tab "Other attributes" mention Reversal Posting key. Like you can observe for posting key 40, reversal key 50 would have been assigned.
Pl assign points, if helpful.

Data Warehouse and ETL tools for data verification ?

Data Warehouse and ETL tools for data verification ?
How need to to data verification using ETL tool ? Also how to relate this thing to datawaehouse ?
Thanks in Advance

Hi Shyamal Kumar,
1) BW it self facilitates to do the ETL (Extraction Transformation Loading) steps:
     example:
                 Extraction - from SAP or other data bases
                 Transformation - using transfer rules, Updates rules
                 Loading - Loading into ODS, Cube, master data
2) Typically used ETL tools in the industry are:
     a)   datastage from Ascential (owned by IBM)
     b)   Informatica
     c)   Mercator
Regards, BB

No quality notification type has been defined for inspection type 89

Hi
When I am creating a manual inspection lot and want to create a quality notification it gives me this error "No quality notification type has been defined for inspection type 89" where do I assign the notifications to the inspection lot.???
I want to know where do I configure it??
Regards
Suresh

Hi
Path for assigning the Qualtiy notification type to Qualtiy inspection type:
SPRO--> Qualtiy Mangement --> Qualtiy inspection --> Inspection lot creation -->
Maintain Inspection types.
Select the inspection type and goto details screen
You can find notification type field in the details.Give the value and Save.
Regards
Ramakrishna

Can start date be set before valid for date for an equipment?

Can start date be set before valid for date for an equipment?

Hello,
Generally when a asset/equipment is purchased that is the valid from date and when commissioning done and it becomes operational then that date is start up date. So logically start up date should not before valid from date, it could be same.
Can you elaborate why you want start up date before valid from date ?
Thanks
Naveen

Customizing missing for salary year ..!!

Hi,
I have implemented ESS/MSS buisness package 1.0 in EP 7.0
while opening claims task for an employee from UWL in portal.. it gives me warning "Customizing missing for salary year".
What is the reason for it and what customization need to be done in ESS to remove this warning ..??
regards,
Jigar Oza

Any suggestion...!!!

Data syncup issue - Custom extractor for revenue recognition data from ECC into BW

Hi there,
We have created a custom extractor on top of a Function Module (FM) in ECC that reads data primarily from VBREVE table. Currently, we have close to 10 million records and full load isn't a preferred option so we built in a delta mechanism using "Created On" (ERDAT) and "Posting Date" (BUDAT). The idea is to do an initial full load and then switch over to delta loads on a nightly basis for data where:
"Created On" OR "Posting Date" is within last 6 months.
This will ensure if any updates are made to the existing VBREVE entries, this change will be reflected in the BW DSO, provided the "Created On" or "Posting Date" fall within last 6 months. The issue comes up if in ECC a billing plan is cut down to a smaller term, let's say from 3 years to 2 years, the entries for the 1 year will be deleted from VBREVE table. How can I pick up this change in BW DSO since this data has already been loaded in the past? Addition of entries are okay but I need to address the deletion on entries in VBREVE table so that it reflects this in BW DSO. Any ideas how I can accomplish this? In the example on the screenshots, BW still shows the before image and I need to be able to get it to sync up with ECC as per the after image.
-Rohit

Dear Rohit,
The case is complicated , there can be workaround using the changedon date from VBAK table. if the billing plan is changed in the sales order VBAK will be updated for changedon.
1) If the billing plan deletion is a very specific case, then using the change log tables find out which are the sales order for which there has been billing plan change. Store this sales order details in DSO day wise. call it DSO1
2) Create a self transformation to the DSO ( DSO2) where you are currently loading from the table VBREVE (DSO2 to DSO2 -For loading data from the same DSO) .Transformation should have reverse record mode given as a constant.
3) load the data DSO2 from DSO2 by filling up sales order details from DSO1 in the DTP filter.
( This will reverse the complete entry for the sales order in DSO2 for the sales order for which billing plan has been changed)
4) Now load afresh for these sales order again from source system to DSO2 from the table VBREVE.
You can also use VBAK changedon date to trigger this load.
Hope I have not confused you
Regards
Gajesh

Date type-specific Customizing missing for date type ACTActPln

Similar Messages

Maybe you are looking for