Dates does not follow import from iPhoto

Hi!
I wanted to learn Aperture 3 so I imported my iPhoto library with a couple of Events and stuff, but when I got going I noticed that tha date of every picture I imported was set to 2001-01-01 01:00:00. But when I import them from Photo Stream the dates are right.
Why did this happen, and is there any way to fix it? It took a long time to import the library, so I don't wan't to try that as a first option...
Thanks!

I also observed this problem on some images imported from iPhoto. In all cases the the date has already been wrong in iPhoto after upgrading the iPhoto library to version 9.3.2. And when importing to Aperture the wrong date was transferred.
The problem (with the images I inspected) was, that the edited versions show the wrong capture date, not the original (master) image files. The originals have the correct capture date in the EXIF information.
In my Aperture library I recovered the date by collecting all images with the wrong date in a smart album, selectig them and using the "Photos > New version from Original" command.
The new versions all had the correct date.
BTW: For my images the date was not 2001, but 1901 - more than a hundred years off I only saw this in Aperture in the "Date created" Exif tag, not in the "Date" tag. iPhoto is showing the full year 1901.
Regards
Léonie

Similar Messages

After installing Mountain Lion, why screen server does not detect photos from iPhoto?

After installing Mountain Lion, why the screen server does not detect photos from iPhoto?

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

Dates Under Project After Import from Iphoto

Is anybody else having this bug?
After importing my library from iphoto, the dates shown under the projects are not showing a 'to' date!
They are ok when the project is on one date, and they show the 'from' date, but never a 'to' date!
Anybody else?

It sounds as though you may have imported the thumbnails but I can't imagine how.
It all depends on what you mean by very low quality.
Your iPhoto pictures will be around 4,000x3,000 pixels but when they are imported into a standard def timeline they will be around 720x540 which is a tremendous reduction.
They should still look OK but not as good as the brilliant hi-res originals.
Message was edited by: Ian R. Brown

ADE Does Not Recognize Import From Nook

I have loaded some books directly from B&N to my nook. The file format that B&N uses is the ISBN number, dot epub. For example 97803454.epub. However, when I connect my Nook to my computer when ADE is open, I am not able to drag and drop the file to ADE; I get an error message that the document is licensed to another user. I can place the file in the ADE folder through Windows Explorer and then add the item to the library, and the item appears but under status, "errors" appears and I am not able to open the file. All I see in the library is the ISBN number.
Is there a way to make this file recognizable in ADE.
Thanks in advance for any assistance.

ADE does not ( yet ) support books purchased from B&N.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

Anyone have a real answer? Imovie 11/snowleo and now imovie does not import from iphoto..

.. anyone have a real answer? Imovie 11/snowleo and now imovie does not import from iphoto

romantiq_rik wrote:
Karsten, I mentioned "IPHOTO to IMOVIE" photo transfer.
In fact, you did not.
We had NO idea if it was a photo or a pocket-camera movie you were trying to import from iPhoto.
You also didn't describe what happens when you try to import.
romantiq_rik wrote:
My pics are already in "IPHOTO" i want to import them into "IMOVIE" and although the
pics appear in the last import tab in the "IPHOTO" librabry, they will not show up in "IMOVIE"
when i click on the photo icon to import them...i see pics from previous imports only., but not the current one that iam attempting to import. It is not an device issue.
this just started happening when i updated to "IMOVIE 11"
OK, that's a bit more information.
iMovie was probably already running when you imported the pictures into iPhoto and wasn't aware of the last import.
Try to quit iMovie and iPhoto, then launch iMovie again. The last import should show up.
Please take a few seconds to proof read your posts and also make then easy to read (no large letters, no underlining, no double line breaks in the middle of a sentence etc).

Why does get-attachment 1aspx appear on pictures imported from Iphoto

Pictures imported from Iphoto into Imovie not as clear as originals. There is a note with each picture ...get-attachment 1aspx. Could this be the reason? What does this message mean?

iPhoto shows you the image at full resolution. If the image is tiny then it's tiny.
You can magnify an image by 300%. In edit mode hold the option key and tap the 2 or 3 button.

Lightroom: Capture time for videos imported from iphoto is not showing in metadata

Hi, I imported all my photos and videos from iphoto to Lightroom recently using the iphoto import plugin. I think all my photos were imported but I noticed that all my videos have no capture time, so they became grouped together in my collections. But I think I can still see their capture time in the "grey text" in each photo. Why did this happen and how do I resolve this issue? I really want my capture times to be in the video metadata and also want to see my videos in the right chronological order with my videos. Strangely, videos imported into Lightroom directly from my camera SD card do not have this issue, only the ones imported from iphoto do. Thanks!

LR does not properly handle video metadata in general, and in particular it often botches capture time. Sometimes this works: Select one video, do Metadata > Edit Capture Time, and then click Change All (without actually changing Corrected Time). If that sets the capture time to the correct time, then you can select all the problem videos, do Metadata > Edit Capture Time, and click Change All. If you have a small number of videos, you can manually correct the capture time using Edit Capture Time.
Please see this thread in the official Adobe feedback forum for more details, vote on it, and add your opinion: Lightroom: Metadata applied to videos in Lightroom isn't available in other applications

ORA-23327: imported deferred rpc data does not match GLOBAL NAME of ..

Hi,
We took an export of a production database in Oracle 9i (9.2.0.7) and created a new database on a test server with Oracle 10g (10.1.0.5)
The original production database was called DC20 and our new test database is called SD20.
Looking at the logs after the import we're seeing this error:
"ORA-23327: imported deferred rpc data does not match GLOBAL NAME of importing db"
We've looked into it a little and it seems to make sense because the names of the databases are different, and from what we've read, we really didn't need to do a full import including SYSTEM anyway. We also came across a solution telling us:
"If you are not using Replication on the target database, these errors can be ignored. However, you should subsequently remove all the replication objects by running:
$ORACLE_HOME/rdbms/admin/catrepr.sql, then catproc.sql"
What I was wondering was if someone could validate that running these scripts and ignoring the errors will be ok, or if they'll cause us issues further down the line.
In case its needed, heres my Export parameter file
"FULL=Y
DIRECT=Y
LOG=E:\Exports\DC20\Log\expDC20.LOG
FILE=E:\Exports\DC20\Data\DC20.DMP"
and heres my Import parameter file
"FULL=Y
COMMIT=Y
GRANTS=N
IGNORE=Y
BUFFER=500000
FILE=E:\Imports\SD20\data\SD20.dmp
LOG=E:\imports\SD20\log\impSD20.LOG"
Thanks for your help!

Thanks Neil, we did already see this note and added it to our list of possible solutions. After we found this one, we also found the one I quoted, which would seem to be the path of least resistance (it would save a good 10 hours in import time if nothing else).
However, if we can't do what I'm asking about in my original post however, the note you mentioned will be our next route..

Rejected...We found that your app does not follow the iOS Data Storage Guidelines,

Where and how do I fix this?
We found that your app does not follow the iOS Data Storage Guidelines, which is required per the App Store Review Guidelines.
In particular, we found that on launch and/or content download, your app stores 3.54MB. To check how much data your app is storing:
- Install and launch your app
- Go to Settings > iCloud > Storage & Backup > Manage Storage
- If necessary, tap "Show all apps"
- Check your app's storage
The iOS Data Storage Guidelines indicate that only content that the user creates using your app, e.g., documents, new files, edits, etc., should be backed up by iCloud.
Temporary files used by your app should only be stored in the /tmp directory; please remember to delete the files stored in this location when the user exits the app.
Data that can be recreated but must persist for proper functioning of your app - or because customers expect it to be available for offline use - should be marked with the "do not back up" attribute. For NSURL objects, add the NSURLIsExcludedFromBackupKey attribute to prevent the corresponding file from being backed up. For CFURLRef objects, use the corresponding kCFURLIsExcludedFromBackupKey attribute.

You're submitting a Newsstand app, right? This error is still under investigation, but the current workaround is create SD (1024x768/768x1024) cover images for your HD (2048x1536) folio renditions and try again.
More info here:
http://forums.adobe.com/message/4730637#4730637

Does anybody know why I get doubles of every image I import from iPhoto 11 to Aperture?

With the upcoming demise of the MobileMe Galleries, I'm making lots of changes to how photos are organized. I'm moving the galleries to a new host. But, I want to pull most of the events, etc from iPhoto 11 to Aperture. iPhoto 11 has been a nightmare to me, and I just want to be done with it. I find that when I import albums from iPhoto to Aperture, I'm getting doubles of every single image. I've set Aperture not to import duplicates, and messed around in other ways, but it's still requiring a LOT of time to delete all these duplicates. Anybody have an idea to fix this?

There's nothing broken and nothing to be fixed. When you migrate from iPhoto to Aperture it imports all the versions - Masters and previews - to the Aperture Library. This is so your migration is lossless.
When you import from iPhoto to Aperture you'll note the versions are tagged 'iPhoto original', 'iPhoto edited' etc so this means it's simple to find the versions in Aperture and delete the ones you might not want.
Regards
TD

I can not gain access to my gmail accounts because it is blocking thunderbird from getting my mail because Mozilla does not follow Industry Security Standards

because it is blocking thunderbird from getting my mail because Mozilla does not follow Industry Security Standards

Says who? Where are you getting this?
I guess you believe the "Less Secure App" rubbish that gmail is putting out.
Gmail has an option to allow these "less secure app" into their secure world.
I also hear that the gmail world is flat. :)

Get an error message when importing from iPhoto says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space."

I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.

I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.

Error: ORA-16796: one or more properties could not be imported from the dat

DGMGRL> CREATE CONFIGURATION prod as
PRIMARY DATABASE IS prod
CONNECT IDENTIFIER IS prod;Configuration "prod" created with primary database "prod"
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
can any one help me out , i am not sure what could be the problem.
i checked the listner and tnsnames every thing looks good, if u want me to post any thing else plz do let me know
thanks
firdous

16796, 0000, "one or more properties could not be imported from the database"
// *Cause: The broker was unable to import property values for the database
//          being added to the broker configuration. This error indicates:
//          - The Oracle Net service name specified in DGMGRL CREATE
//            CONFIGURATION or ADD DATABASE command was not one that provides
//            access to the database being added.
//          - There were no instances running for the database being added.
// *Action: Remove the database from the configuration using the REMOVE
//          CONFIGURATION or REMOVE DATABASE command. Make sure that the
//          database to be added has at least one instance running and that the
//          Oracle Net service name provides access to the running instance.
//          Also check the broker log file for additional information.
//          Then, reissue the CREATE CONFIGURATION or ADD DATABASE command.

Missing faces/places after event import from iPhoto to A3

Hello,
I am interested in switching from iPhoto 09 (8.1.1) to Aperture 3. I downloaded the Trial Version yesterday evening. I have a very big iPhoto library (28.000+ pictures) and I did not want to import all of them right now. I wanted just a few events in A3 to play around with it.
I imported 3 different events into A3 via File - Import - Show iPhoto Browser. I selected the 3 events and put them per drag & drop into project. The few pictures were imported really quickly but I have some problems afterwards.
1. All the pictures are missing the faces and places which I assigned them in iPhoto.
2. Except the pictures taken with the iPhone - they had the places assigned to them.
3. I do not have any issues with the keywords. They are all there.
First I though I made a mistake somewhere. So I tried this at my OneToOne at the Apple Store today. We did the same thing on their iMac and had the same issues. After importing an event we were missing the places and faces.
When I got home I created a new user on my MacBook and tried the same thing with that user account. I created a new iPhoto library (with a few pictures in it) and a new A3 library. I imported pictures with assigned faces and places and some pictures taken with the iPhone as well.
Every time I import a few events A3 does the same thing:
~ It imports the different events into different albums in one project.
~ All the photos taken with the iPhone will keep the places pin.
~ All other photos will loose their places pin.
~ All imported photos will loose their faces names.
~ All pictures will keep their keywords.
Does anybody else have this problem? Any ideas?

I'm having a similar problem with missing Places after importing from iPhoto 09 to A3.
After scratching my head over it, I created a new account on my Mac, imported some pictures from my camera and iPhone, and did some tests with Places. Here's what I figured out:
To retain the Faces and Places information from iPhoto, you need to use Aperture's
File-->Import-->iPhoto Library...
command, not the
File-->Import-->Show iPhoto Browser...
command.
My testing indicates that Faces were imported successfully, but Places are imported with caveats:
Places data was correctly imported for the following cases:
1. iPhone pictures with embedded GPS location.
2. Pictures whose Places location was assigned with the Paste Location feature in iPhoto.
3. Pictures whose location was individually assigned with the i (information) button and then manually searched for in the Places map.
Places data was NOT imported when the location was assigned to the entire Event in iPhoto. That is, rather than assigning locations to individual photos, I assigned a location to the entire Event, then that location information was NOT successfully imported into Aperture.
I have reported this as a bug to Apple. I hope this helps clarify the behavior for you.
...David

Dates does not follow import from iPhoto

Similar Messages

Maybe you are looking for