DB::truncate

We have a replicated environment with one master site, and one slave, running Berkeley DB XML 2.5.16 on top of Berkeley DB 4.8.26. When we run XmlManager.truncateContainer() from our Java code (which in turn calls the truncate function on a __db struct) we receive a PANIC on the replication slave, and the error log shows this message:
Log sequence error: page LSN 770 1283626; previous LSN 770 1311669
transaction failed at [770][1311738]
Error processing txn [770][1317615]
PANIC: Invalid argument
Is this a known issue?
Thanks,
Alexander.

This is not a known issue. Can you send me an email at
[email protected] and send me the log files 770 from
both the master and client (compressed) so that I can see what
is in the log at those LSNs?
Please keep both the master and client envs put aside so that
if we need to look at any of the databases, they are there. Thanks.
Sue LoVerso
Oracle

Similar Messages

Print a report on doc format truncate data

hi
I have a report launching with a form in an oracle applications, when I print a report on pdf format looks ok
but when I print the same report on doc format truncate data on left and right side.
Can you help me
thanks

Hi Herbe
Reports does not support .doc format. Are you referring .rtf format?
In any case, you must contact Oracle Support to get the issue resolved.
Regards
Sripathy

Why does FireFox truncate part of an E-mail of more than one page when I try to print it out? How can I sent an E-mail blaet to several but only show one name o

When I try to print out an E-mail that is longer than one page, part of the 2nd page is truncated. I then have to go to Safari to print out the entire E-mail without part of it being truncated.
When I have multiple E-mail addresses on a single E-mail, how can I send the E-mail so that each recipient only sees his/her name and E-mail address rather than everyone else that the E-mail is addressed to?
Please advise.
Thank you.
Bill Leete

Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address.

List View in Xcelsius and truncated lines

Hi @ all,
I use a List View in Xcelsius 2008 and sometimes, when the text is longer
than the column width, unfortunately the text is truncated then.
Is it possible to have then automatically two lines if the text is longer than the column width?
That was the reason why I wanted to use the “Input Text Area”. But I cannot use
the Input Text Area if I have more than 1 destination cell.
Can you help me here?
Thanks in advance for your help!
Regards,
Maggy

Hi,
You try to change or adjust the field lengths as shown below.
In properities of the list view you can see the Push button " Configure Columns" Then change the length of the fields as you like.
Regards,
G.S.Ram.

Logical standby and truncate partition

Hi,
I'm evaluation whether a logical standby database would meet our needs.
We have a live database and want a reporting database that is identical to the live one, just minutes behind in time to the live one, plus we want to create other summary tables etc on the reporting db.
Logical standby seems to meet our needs but I have one query.
- On the live db the most of the tables are organized by date partitions and only 5 days are kept with new partitions being created every night for the forthcoming days and the oldest date partitions being truncated.
On the reporting database we want to keep 30 days partitions.
Can we have all the DDL and DML from live being applied to the standby APART from the specific truncate partition statements?
Many Thanks,
Kailas

Addendum.
If you can , it is better to truncate the partition but not drop it, after exporting the partition for archive purposes. If you ever need to bring the data back, the data will go into the correct partition . If the table structure has been changed by adding or lengthening columns, this will still work OK where column names match.
Test ease of restoration of archived data to existing and non-existing partitions with altered structure (dropped columns,added columns, renamed columns) for yourself though.
Regards, Vin.
PS. When splitting maxdata partition to create new 'highest' partition, use a small initial extent then the 'next' being the expected real size needed. When the partition is truncated, the only space that should remain un-claimable will be that allocated for the initial extent.

Pages 5.1 truncates text in tables

Just discovered that Pages 5.1 truncates text in tables when exported to Pdf's even when created in Numbers and pasted. Superscripts were missing. Sometimes regular text after superscrips were missing. Too bad.

It's a bug. Until fixed, you'll have to avoid baseline shift or use an earlier version of Pages. Submit Feedback from the Pages menu to let Apple know you are finding this bug.
Jerry

Database in noarchivelog mode, truncate command issued

Database in noarchivelog mode, truncate command has been issued how to restore the table?
FACTS:-
1. DB In noarchivelog Mode
2. Cannot enable flash back mode because of 1. above
3. No exports available
4. No backup's Available.
Any thoughts ?

Oracle Support/ Professional Services has a Data Unloader (DUL) and ORA-00600 has DUDE, both of which may be able to extract information from data files that are corrupted, where the control files are lost, etc.
These are not, however, cheap utilities. Unless the data itself is really valuable, it is generally not a viable option.
Justin

Crystal 2008: Text, Can Grow=true, Max Lines=0, truncated after 2 lines

I have a fairly simple, grouped report with a handful of fields in each Detail section, one of which is a note/text field. I put the text field on its own line and set Can Grow = true, max lines = 0 so that it will display what it needs to display.
This happens to be a crystalreports.com report using data coming from Salesforce, and I can see in the source report that I have about 7 lines of text for one of my groups, but crystal is truncating it after two lines, and in the middle of a word.
The word ('for') doesn't have any obvious special characters in it, so I'm guessing that there's some sort of character limit that I'm bumping up against.
I have another record that is returning more than two lines, though; are there particular characters that could cause this? I can scrub the data and/or put Salesforce Validation Rules in place to try and prevent them from getting in.
Any suggestions would be appreciated.
Duncan

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Sporadically getting error "string or binary data would be truncated" in SQL server 2008 while inserting in a Table Type object

I am facing a strange SQL exception:-
The code flow is like this:
.Net 4.0 --> Entity Framework --> SQL 2008 ( StoredProc --> Function {Exception})
In the SQL Table-Valued Function, I am selecting a column (nvarchar(50)) from an existing table and (after some filtration using inner joins and where clauses) inserting the values in a Table Type Object having a column (nvarchar(50))
This flow was working fine in SQL 2008 but now all of sudden the Insert into @TableType is throwing  "string or binary data would be truncated" exception.
Insert Into @ObjTableType
Select * From dbo.Table
The max length of data in the source column is 24 but even then the insert statement into nvarchar temp column is failing.
Moreover, the same issue started coming up few weeks back and I was unable to find the root cause, but back then it started working properly after few hours
(issue reported at 10 AM EST and was automatically resolved post 8 PM EST). No refresh activity was performed on the database.
This time however the issue is still coming up (even after 2 days) but is not coming up in every scenario. The data set, for which the error is thrown, is valid and every value in the function is fetched from existing tables.
Due to its sporadic nature, I am unable to recreate it now :( , but still unable to determine why it started coming up or how can i prevent such things to happen again.
It is difficult to even explain the weirdness of this bug but any help or guidance in finding the root cause will be very helpful.
I also Tried by using nvarchar(max) in the table type object but it didn't work.
Here is a code similar to the function which I am using:
BEGIN
TRAN
DECLARE @PID
int = 483
DECLARE @retExcludables
TABLE
    PID
int NOT
NULL,
    ENumber
nvarchar(50)
NOT NULL,
    CNumber
nvarchar(50)
NOT NULL,
    AId
uniqueidentifier NOT
NULL
declare @PSCount int;
select @PSCount =
count('x')
from tblProjSur ps
where ps.PID
= @PID;
if (@PSCount = 0)
begin
return;
end;
declare @ExcludableTempValue table (
        PID
int,
        ENumber
nvarchar(max),
        CNumber
nvarchar(max),
        AId
uniqueidentifier,
        SIds
int,
        SCSymb
nvarchar(10),
        SurCSymb
nvarchar(10)
with SurCSymbs as (
select ps.PID,
               ps.SIds,
               csl.CSymb
from tblProjSur ps
            right
outer join tblProjSurCSymb pscs
on pscs.tblProjSurId
= ps.tblProjSurId
inner join CSymbLookup csl
on csl.CSymbId
= pscs.CSymbId
where ps.PID
= @PID
    AssignedValues
as (
select psr.PID,
               psr.ENumber,
               psr.CNumber,
               psmd.MetaDataValue
as ClaimSymbol,
               psau.UserId
as AId,
               psus.SIds
from PSRow psr
inner join PSMetadata psmd
on psmd.PSRowId
= psr.SampleRowId
inner join MetaDataLookup mdl
on mdl.MetaDataId
= psmd.MetaDataId
inner join PSAUser psau
on psau.PSRowId
= psr.SampleRowId
            inner
join PSUserSur psus
on psus.SampleAssignedUserId
= psau.ProjectSampleUserId
where psr.PID
= @PID
and mdl.MetaDataCommonName
= 'CorrectValue'
and psus.SIds
in (select
distinct SIds from SurCSymbs)
    FullDetails
as (
select asurv.PID,
Convert(NVarchar(50),asurv.ENumber)
as ENumber,
Convert(NVarchar(50),asurv.CNumber)
as CNumber,
               asurv.AId,
               asurv.SIds,
               asurv.CSymb
as SCSymb,
               scs.CSymb
as SurCSymb
from AssignedValues asurv
left outer
join SurCSymbs scs
on    scs.PID
= asurv.PID
and scs.SIds
= asurv.SIds
and scs.CSymb
= asurv.CSymb
--Error is thrown at this statement
insert into @ExcludableTempValue
select *
from FullDetails;
with SurHavingSym as (
select distinct est.PID,
                        est.ENumber,
                        est.CNumber,
                        est.AId
from @ExcludableTempValue est
where est.SurCSymb
is not
null
delete @ExcludableTempValue
from @ExcludableTempValue est
inner join SurHavingSym shs
on    shs.PID
= est.PID
and shs.ENumber
= est.ENumber
and shs.CNumber
= est.CNumber
and shs.AId
= est.AId;
insert @retExcludables(PID, ENumber, CNumber, AId)
select distinct est.PID,
Convert(nvarchar(50),est.ENumber)
ENumber,
Convert(nvarchar(50),est.CNumber)
CNumber,
                        est.AId
from @ExcludableTempValue est
RETURN
ROLLBACK
TRAN
I have tried by converting the columns and also validated the input data set for any white spaces or special characters.
For the same input data, it was working fine till yesterday but suddenly it started throwing the exception.

Remember, the CTE isn't executing the SQL exactly in the order you read it as a human (don't get too picky about that statement, it's at least partly true enough to say it's partly true), nor are the line numbers or error messages easy to read: a mismatch
in any of the joins along the way leading up to your insert could be the cause too. I would suggest posting the table definition/DDL for:
- PSMetadata, in particular PSRowID, but just post it all
- tblProjectSur, in particularcolumns CSymbID and TblProjSurSurID
- cSymbLookup, in particular column CSymbID
- PSRow, in particular columns SampleRowID, PID,
- PSAuser and PSUserSur, in particualr all the USERID and RowID columns
- SurCSymbs, in particular colum SIDs
Also, a diagnostic query along these lines, repeat for each of your tables, each of the columns used in joins leading up to your insert:
Select count(asurv.sid) as count all
, count(case when asurv.sid between 0 and 9999999999 then 1 else null end) as ctIsaNumber
from SurvCsymb
The sporadic nature would imply that the optimizer usually chooses one path to the data, but sometimes others, and the fact that it occurs during the insert could be irrelevant, any of the preceding joins could be the cause, not the data targeted to be inserted.

Why are results from xmlgen.getxml truncated?

I have a table with 25 rows in it that displays all contents with a SELECT * statement. However, if I wrap this statement in an xmlgen.getxml the result is truncated. I'm sure this is a novice issue, and this novice would appreciate any insight.
Thanks in advance,
Rich
query:
SELECT xmlgen.getxml('SELECT * FROM dbotemp.portfolio') xml from dual
result:
XML
<?xml version = '1.0'?>
<ROWSET>
<ROW num="1">
<PORTFOLIO_ID>187</PORTF
1 row selected.

you get a clob and clobs are normely truncated
when you use the statement ins SQL*PLus try: "set long 10000"
and you will see the whole result

Data getting truncated while exporting report to a text file in crystal 10?

Hi All,
I am using crystal 10.When exporting report to a text file ,a dialog prompts asking for Character perinch with a default value 9.If I change the value from 9 to 16 i am getting the correct data(that means character per inch value is 16) and it update "CharPerInch" value in registry under following location to 16.
HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal Reports\Export\Text
The dialog asked for character per inch also has option to select not to prompt again and i also selected that in first go.
When i export the report again in text format it didn't prompt for number of character per inch but the data gets truncated.
What i believe is even though it updates entry in registry and reads, it is not using the same value for export. It never consider the value that is in registry, if the check box is not selected then it is using the value entered in the dialog and if the check box is selected then in the next run it uses the default value as 9.
Can anyone suggest me how to override this problem ? Is there any other setting place in registry where i can enter the number of character per inch.I don't want to crystal to prompt always for character per inch.

Hi Venkateswaran,
The other option to avoid truncation of the data could be
Right click the text filed
Click on Format Text to open the Format Editor
On Common tab check the text box for Can Grow.
This will prevent the data from truncating in preview as well as while exporting to text.
Otherwise you will have to set the characters per inch to 16 each time. I donu2019t see changing the registry value causing any difference here.
Regards,
Aditya Joshi

Fields are getting truncated

Hi,
I am doing re-development,while doing data loading I am getting some fields value truncated but as i had checked the transfer rule and update rules are all mapped correct and the field lengh is also correct .
Like our Company Code is 1000 and in the new development PSA that value is comming to be only 10.
Thanks

Hi....
there are no routines present in update rule as well as in transfer rule.
Thanks,
Pooja
Edited by: Pooja Bhandari on Feb 18, 2009 7:23 AM

How to truncate the values from the table

Hi All,
I am working on an issue..where we are first deleting all the records from the table and then based on few conditions we are putting the records back in that table...when we tried to run this program along with few others those who are doing almost the same stuff we are having issues...we tried to schedule few jobs related to these programs only...but after a ceratin amount of time couple of jobs got canceled...I was talking to my basis guy and he said the problem is ratehr then truncating the records from the table we are deleting the records and it's taking lots and lots of space to execute...so we need to truncate the records from the table insted of deleting it...we are using the following the statement right now:
    DELETE FROM ZTUS_PG.
    COMMIT WORK.
So can you please tell me how can we truncate the values from this table instead of just deleting them and what would be effect of this.
Thanks,
Rajeev Gupta

I don't think basis is saying you should delete all the records from the table. They are saying remove the table and it's contents (a much faster thing to do). I'm not sure this the right thing to do, but you can have a look at:
http://publib.boulder.ibm.com/infocenter/db2luw/v9/index.jsp?topic=/com.ibm.db2.udb.apdv.sample.doc/doc/admin_scripts/s-truncate-db2.htm
Something like:
EXEC SQL.
TRUNCATE TABLE ZTUS_PG REUSE STORAGE
ENDEXEC.
COMMIT WORK.                      "Empty table is committed here
Rob
Edited by: Rob Burbank on Dec 1, 2008 4:06 PM

One track is always truncated when I try to import

This is the weirdest thing. I am running iTunes 7.7 on my MacBook, although this problem appears to have occurred ages ago when I originally ripped this CD.
It's a store-bought classical CD, which I very much like. When I put it in the drive, it shows up in iTunes, and all of the track lengths show up correctly. The crucial one here is track 1, which is 8:30 long. If I play it from there, I get the whole track, no problems.
If I then import the CD, all of the tracks come in correctly, except this one. It comes in as only being 2:12 long. That is, if I look at the CD, it still claims to be 8:30 and it claims to have successfully imported, but if I look at the music library, it claims to be 2:12, and when I play it, it's truncated.
I checked the start and stop times with Get Info, and they match what I'm seeing -- if I try to set the imported file to be 8:30, it won't let me do it.
The CD was made in 1990, if that's relevant (I was wondering if perhaps there was some attempt at copy-protection denying me a legal use).
When I try to copy the file by drag-and-drop from CD to desktop, I also get an error, so I'm wondering if the file is just corrupted on the CD. (Other files on the same CD copy okay.)
I've rebooted, I've reimported, I've tried everything I could think of. I have no earthly idea what's going on here.
Any ideas? Any way to recover this piece of music if the CD is corrupted such that it only allows playback but cannot be copied?
-- Aimee

It sounds like there might be some weird error on the disc. iTunes' ripper isn't necessarily the best for dealing with damaged discs, give this one a whirl:
http://sbooth.org/Max/

Truncating arabic data/text when deployed on 10gAS, where as Eng is Ok

DETAILS:
When I run a report using report builder everything is fine. But when I deploy that same report on Application server & when I run from browser, the arabic data in the report is getting truncated ! where as English text/data is ok.
To solved this problem I have to expand each text / item in report builder. But why with arabic only? And how the report is working fine when run using Report Builder? For some reports even after expanding still gets truncated while deployed on Application server.
I think the FIX is around PDF. when report is deployed on AS, then output is generated in PDF & then above problem is encountered. Where as executed in Report Builder, output is generated in previewer which is fine.
please help
Edited by: Mubeen on Mar 18, 2009 2:56 AM

I have experiecnce with this problem... and unfortunatly ther's not solution.
Some trigger (like when-mouse-enter or when-mouse-live) don't work with form deployed on web. I suppose that these triggers are not supported in deployd on web because the "client" browser shuld be constantly comunicate with the runtime engine.

I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

Try opening Disk Utility in your Applications-Utilities folder and repair permissions.

DB::truncate

Similar Messages

Maybe you are looking for