DB2, Log File has reached its saturation point" DIA8309C Log file was full,

Hello Experts,
I have successfully installed a ECC 6.0 System-ABAP + JAVA (DB2 v9.5 windows server 2008-x64 bit).
Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17.
However now i suddenly cannot connect to database and SAP is down.
C:\Users\dsqadm.DUCATI>r3trans -d
This is r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = DB6                              --- DB2DB
DFT = 'DSQ'"
r3trans finished (0012).
db2diag.log:-
ADM1823E  The active log is full and is held by application handle "51886".  Terminate this application by COMMIT, ROLLBACK or FORCE APPLICATION.
"Log File has reached its saturation point" DIA8309C Log file was full.
"Backup pending.  Database has been made recoverable.  Backup now required."  DIA8168C Backup pending for database .
Also, regarding DB2 licensing,i have a query:
db2licm -l gives the following:
C:\Users\db2dsq.DUCATI>db2licm -l
Product name:                     "DB2 Enterprise Server Edition"
License type:                     "CPU Option"
Expiry date:                      "Permanent"
Product identifier:               "db2ese"
Version information:              "9.5"
Enforcement policy:               "Soft Stop"
Features:
DB2 Database Partitioning:        "Licensed"
DB2 Performance Optimization ESE: "Licensed"
DB2 Storage Optimization:         "Licensed"
DB2 Advanced Access Control:      "Not licensed"
DB2 Geodetic Data Management:     "Not licensed"
IBM Homogeneous Replication ESE:  "Not licensed"
Product name:                     "DB2 Connect Server"
License type:                     "Trial"
Expiry date:                      "10/19/2009"
Product identifier:               "db2consv"
Version information:              "9.5"
I have applied both sap and DB2 license. Is everything ok regarding licensing of DB v9.5 for using with SAP?
I am new to DB2 database and looking for expert guidance regarding the above mentioned issues.
Thanks,
Rakesh

C:\Users\db2dsq.DUCATI>db2 get dbm cfg
          Database Manager Configuration
     Node type = Enterprise Server Edition with local and remote clients
Database manager configuration release level            = 0x0c00
Maximum total of files open               (MAXTOTFILOP) = 16000
CPU speed (millisec/instruction)             (CPUSPEED) = 4,723442e-007
Communications bandwidth (MB/sec)      (COMM_BANDWIDTH) = 1,000000e+002
Max number of concurrently active databases     (NUMDB) = 8
Federated Database System Support           (FEDERATED) = NO
Transaction processor monitor name        (TP_MON_NAME) =
Default charge-back account           (DFT_ACCOUNT_STR) =
Default database monitor switches
   Buffer pool                         (DFT_MON_BUFPOOL) = ON
   Lock                                   (DFT_MON_LOCK) = ON
   Sort                                   (DFT_MON_SORT) = ON
   Statement                              (DFT_MON_STMT) = ON
   Table                                 (DFT_MON_TABLE) = ON
   Timestamp                         (DFT_MON_TIMESTAMP) = ON
   Unit of work                            (DFT_MON_UOW) = ON
Monitor health of instance and databases   (HEALTH_MON) = OFF

Similar Messages

  • I need to log into my icloud account but it has reached its limit can i reset this ?

    i cannot get my icloud account on my device it says it has reached its maximum amount of account

    No, that cant be reset.  You won't be able to create a new account using that device.  Your only options are to either re-use one of the accounts previously created on it, or create a new account using a different iOS device or Mac, if you have one.

  • Can you tell when a loaded SWF has reached its final frame?

    I used loadMovie to load an external SWF into the bottom-half
    of a main "shell" swf. When that loaded SWF finishes playing (it's
    just an animation), I need to populate a text field with the word
    "DONE" . The text field resides on the _root, so I need some way to
    know when the loaded SWF has reached its last frame...
    This would obviously be easy if I had the .FLA of the loaded
    SWF because I could just write the actionscript on the last frame
    of that SWF to populate the _root textfield. Alas, I do not have
    the source FLA of that loaded SWF, so I need some way to have the
    main "shell" SWF/FLA know when that loaded SWF has reached its end.
    Is this possible???
    Thanks!!!

    DIY_Lobotomy,
    > The reality of my situation is that there's a "menu" of
    sorts that
    > gets loaded into "contentClip". This "menu" has a bunch
    of links.
    So far, so good.
    > When clicked, each link loads a DIFFERENT swf into
    "contentClip".
    > It is THOSE swfs that I need to note the end of.
    That's still okay.
    > So, there's actually more than one, and they're not
    exactly being
    > loaded directly from my main movie, since they're
    actually loaded
    > based on a link being clicked in the movie that is
    currently loaded
    > into "containerClip"
    The concept is still the same, no matter what. No matter how
    deep the
    one-clip-loads-another chain goes, you have to keep taps on
    each chain link.
    When the final link has loaded, you'll be able to make your
    object reference
    to that movie clip. That movie clip -- because it's an
    instance of the
    MovieClip class -- will have the _currentframe and
    _totalframes properties.
    You'll just be checking *that* cliip's properties instead of
    the one named
    contentClip in my own example.
    You can loop using onEnterFrame or, if you prefer, with
    setInterva().
    That doesn't much matter either, so long as you repeatedly
    poll the deepest
    clip to test its current frame against its last frame (this
    all assumes that
    the clip being tested is a linear animation whose end
    corresponds to its
    last frame; otherwise, you could check _currentframe against
    any arbitrary
    frame number).
    > I hope that wasn't too confusing! Do you still have a
    solution???
    Not too confusing to understand, but it might be confusing
    to route
    through in practice. Not confusing, actually, but meticulous
    ... you'll
    have to be careful with your pathing. Nested movie clips are
    very much like
    nested folders on your hard drive. Their instance names
    relate to the
    folder names.
    Now, if that menu doesn't have an instance name you provided
    -- or if
    any fork along the path has an instance name you can't
    control -- you can
    still reference the nested movie clips. If you test your file
    in the
    Debugger panel, you'll see all the instances laid out in
    hierarchical order.
    You'll see that automatic instance names are provided
    (something like
    "instance1", "instance2", etc.).
    David Stiller
    Contributor, How to Cheat in Flash CS3
    http://tinyurl.com/2cp6na
    "Luck is the residue of good design."

  • Creative Cloud Membership has reached its limit for hosted sites

    I have had a paid Adobe Muse Creative Cloud membership for about 2 years now, and only used one website. I understand I can host up to 5. But for some reason when I try to launch a new site, I am told my membership has reached its limit for hosted sites. Can someone please tell me if I have some test pages I'm hosting (or something) and how I can erase them so I can make room for my new site. These are only personal sites so I do not need a business catalyst url for testing. I have the two domains active now and just need to be able to have both go live.
    My email is [email protected]
    The web page I'm trying to launch is www.ninetiesband.com. The only site that should be active right now is www.wearenightsbridge.com.
    Thank you for any help you can provide.
    -Mickey

    Hello Mickey,
    I checked your subscription details, and it looks like you're subscribed to Adobe Muse single app subscription, and not Creative Cloud subscription. When you sign up for Muse single app subscription (yearly), you get one free site to host with Business Catalyst. You only get 5 sites when you have a full Creative cloud subscription.
    Cheers
    Parikshit

  • Why am I getting a "Adobe Creative Cloud Membership has reached its limit for hosted sites" message?

    I just tried to push my FIRST "free" Creative Cloud site live and got the message "Your Adobe Creative Cloud Membership has reached its limit for hosted sites. To push this site live you will need to purchase an additional hosting plan." I thought CC membership was supposed to give you 5 free hosted web basics sites?
    I am a premium BC partner and so far have my partner site and a paid Webcommerce site . In addition to the site I'm trying to put live I have 2 other trial sites (think they are designated as WebMarketing sites) of which one is expired. So where does the limit come in as this is so far my only WebBasics site?
    Please help as I need this live urgently (without additional expense).

    Hi Judy
    Appologies for this un-answered post, if any related issue is still active please reach out to our support directly.

  • Cloud Membership has reached its limit for hosted sites.

    I have a full subscriptin to the cloud but when I try to push my new Muse site live Iget the following error: "Your Adobe Creative Cloud Membership has reached its limit for hosted sites."  After much research I have kind of figured out that when I upgraded my trial version of Muse only to a paid version of the Adobe Cloud, the system may think I am still a trial member.  I sent in a ticket but three says later it's still not fixed.  Anyone one else had this issue?

    I have only ever used one email address. [email protected]  I'm not sure why it would should that I have even used one site since I have never published a website live.  I have only played around with 3 different sites... all of which should still be temporary.  The site I am trying to push live right now is outsidetheveil.com. 

  • Empty File has to write after Message Processing in File Adapter..!!

    Hi,
    File to File Scenario.
    Once the file is processed and placed in the receiver folder, I need to generate one empty file with the original file name but with different extension (DON). This is used to indicate that the full file is written in the folder.
    Example:
    Original file has to write like "Output_Final.CSV"
    Empty file has to be placed like "Output_Final.DON"
    Is there any way I can achieve this requirement.?
    Thanks
    Deepthi.

    I have no clue of removing the same using Graphical mapping ..
    I hope you have set the option of Write Empty File if not try this and still doesnot work
    then need to look for java or ABAP mapping
    chekc the below thread may help
    Re: How to create empty Payload
    Rajesh

  • Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file [help]

    Hi,
    I have a excel file that I have been using since beginning of year.
    Yesterday, I tried to open it but a message comes out "
    Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
    After I click yes, the page is blank. The file is about 400kb in size.
    I have try open and repair and third party repair program and not working also.
    I would appreciate a lot if you can help me.
    Thank you very much.

    Per your post, this problem might be caused by malware on the affected machine.
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
    In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx) to kill the malware, and then repair Excel file itself.
    If this is not the case, feel free to post back and let me know. Thanks.
    Tony Chen
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to enable a reminder for when a shared review has reached its end date?

    I thought Acrobat will send the initiator of a shared review a reminder before the "end review" date is reached. This will allow him/her to check with the reviewers how they are going.
    It seems we aren't receiving that reminder anymore.
    When I setup the shared review process initially I thought I saw a reminder that the review is ending in a day or so.
    Lately it looks like that has stopped...
    We use Acrobat X Pro & Std, SharePoint and Outlook 2010
    Appreciate your help

    Acrobat doesn't send scheduled emails and never has done. You have the option to manually 'email all reviewers' via the Tracker dialog, and of course when someone opens the PDF they'll be told the deadline.

  • I have just attempted an archive and install of my OS, the status bar has reached a certain point and does not seem to load any further. Help?

    The installer has been stuck at "44 minutes remaining" for about 2 hours now, I don't want to quit the installer incase I lose any files. I have no idea what to do now
    Before doing the archive install I ran disk utility and came up with no problems. I have completed two previous archive and installs after a few issues I had with my MB. I suspect my HD is failing however it has never just stopped loading like this before.
    Any info would be greatly appreciated.

    So your n 10.5 and you have archived and installed before, and it stalled this time,
    You likely ran out of drive space or even hit a bad sector on the drive.
    Reboot the machine holding the shift key down, that hopefully should get you in so you can delete the previous archived versions of OS X.
    Your user accounts and files are stored seperate and even if archived with OS X, it's a copy of the orginals.
    Once you get in, copy these like Users folders to a external drive as soon as possible and disconnect.

  • SP2013 On Premise - Site Collection says it has reached its size quota, but its specified quota is much higher. How should I fix this?

    Hi,
    We have an on-premise SharePoint 2013 environment.  We set the mysite quota up to 500 meg.  However, some of the mysites are getting up to 100 meg, and then giving an error message saying that the quota has been met.  Has anyone ever run into
    this issue before?  I'd really appreciate some advice on this one.
    Thanks. =)

    Yes, In central admin, I can see the site is 100 meg, and there isn't anything in the recylcing bin, as well.  But, I think I found the answer here: http://www.sharepointwendy.com/2012/07/updating-quota-template-doesnt.html
    Basically, updating the template does not update the quota on the sites that are already using the template.  You have to set those sites' to use the templates they are using...again.
    I'm testing this now.
    Cheers!
    Edit: yup, this was it!  After the site template is updated, the sites that already use the template at that time, also need to be updated!

  • .ipa file has 100 times of the the original file size

    For the last 1 1/2 years I've been working on a digital songbook. Each article has audio files (2mb), overlays, pdf scores and html content.
    With DPS App Builder I finally made the distribution app (.zip) and the developer app (.ipa) which I couldn't download, because the .ipa file was incredibly large and I always got the message that my macbook has not enough memory.
    So I build a second folio with just 10 articles and total of approximately 20 MB file size (mp3, pdf, html content).
    Now I could download the .ipa file from DPS app builder, but the file size is 2,12 GB - more than 100 times larger than the size of the files used in this 10 articles.
    To be quite honest: i don't know what to do, because I never was expecting that. What big mistake do I make?

    The most likely problem is that at least one of your Web Content overlays points to an .html file in a Documents folder or Desktop folder. With Web Content overlays, DPS uploads the entire contents of the folder (and all subfolders) in which the .html file appears. So check to make sure that the HTML files you link to are properly isolated.

  • FIle hasnt reached RFC

    I am sending a file to RFC
    I see checkered flag in MONI
    I see gree receiver CC
    The RFC on the R3 hasnt received the contents that i sent
    I have following Questions
    1. Is my source file reached RFC? IF yes where do I need to check? receiver side CC green implies file sent succesfully?
    2. On the RFC side, how do I check if the sender file has reached R3 and to RFC? where will the file reach first in R3?
    3. How do I execute the RFC function module on the R3 side?
    I know name of the FM ... its a customized FM
    help !!!!
    Nikhil.

    Hi,
    First of all, have imported the RFC in XI?
    Is your Connection works fine?
    Is your RFC is <b>Remote Enabled</b>? (under Attribute tab in R/3 tcode SE37) if not make it remote enabled.
    Now your answeres are as below:
    <b>1. Is my source file reached RFC? IF yes where do I need to check? receiver side CC green implies file sent succesfully?</b>
    Ans  Check in Moni R/3 side, also check the queues SMQ1.
    <b>2. On the RFC side, how do I check if the sender file has reached R3 and to RFC? where will the file reach first in R3?</b>
    Ans: In R/3 check in the respective tables as you mentioned the below ques that you have a Z FM, then you must be knowing the table names.
    <b>3. How do I execute the RFC function module on the R3 side?
    I know name of the FM ... its a customized FM</b>
    Ans: No need to execute the RFC for your scenario. (but for your knowledge, use Tcode se37-->enter the RFC name and press ececute button)
    Regards,
    Sarvesh

  • Pick a file based upon its extension

    Hi Experts,
    I have a requirment. I have to pick a file based upon its extension, i.e., the file having a particular extension, should be picked up before fiiles having a diferent extension.
    Is this possible using only the adapter configuration?
    Thanks and Regards,
    Sanjeev.

    Hi Sanjeev ,
    Have a look at following PDF .These will be helpful to create your Road map
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4f61fddf-0601-0010-7ab5-fb749538f6ab
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d458a870-0601-0010-caab-b99c79741964
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    BPM Steps..
    http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/frameset.htm
    /people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
    Reward points if it is useful
    Thanks
    Sunil Singh

  • Comenity saturation point

    A question I'd like to put out there for the board. I've enjoyed the nice Comenity store card CLI's as much as anyone and appreciate them. I try to do them in moderation although Barney's has gone a little crazy for all of us! I also have some new Comenity Signature Visas and a new Comenity Capital Mastercard. In the past, posters have mentioned that Synchrony has maximums and saturation points with the amount of credit they give out. I'm wondering if the same can be true of Comenity in months to come. Right now it seems limitless to many people. But personally, I'd rather save the CLI's for the Comenity Signature Visas and Mastercard if taking larger CLI's on the Comenity store cards meant less chance of CLI's on the major cc's or smaller VISA and MC CLI's due to taking it on the store cards. This may or may not happen going forward, but since pretty much every bank has a saturation point, wanted to put it out thre for discussion. This issue is a little separate from using common sense when requesting CLI's, which it helps for us all to do. That's not really the issue (although a good point). It's more of a planful or strategic requesting of CLI's and for those of us who have Comenity Visa and MC, something to consider. No bank is limitless in what it gives out. Thanks.

    One can only hope.

Maybe you are looking for

  • How can I update an already saved "bookmark all tabs" group with a current group of tabs? Or add only the changes??

    Example of problem: I have already saved a group of tabs using the "bookmark all tabs" feature. I open that group of tabs in a new browser window. Then I modify that group of tabs that I have open, adding new ones, removing old ones. How can I replac

  • Non-breaking space character

    I am loading an XML with all of my tags.  Within that XML, there are nbsp; characters.  I parse those and make them into  .  I do read the string properly when accessing, although when i try to set a htmlText of a label or text object, the &#xA0 is a

  • Error in recovery media creation

    I bought  a new HP laptop recently.Its a HP PAVILION G6 2320TX.I ran the Recovery Media  Creation .After the initial setup and burning of files onto my first dvd,when it comes to verify, i am getting an error that states "We are experiencing errors i

  • Conditional Build Tags in Table

    I have a table with three rows (in the middle of the table) that are conditional tags. When I generate the Webhelp output for the version that excludes the tagged rows, I end up with blank lines in the table where the tagged rows were omitted. How do

  • Labview installation - not compatible directory

    I have problem with installing LabVIEW 2014 64bit on my Windows 8.1 Proffesional 64 bit machine. Story: I downloaded LabVIEW 2014 and installed it only to find out its 32bit version. I wandted 64bit version so when i found it i downloaded it. Then i