DBACOCKPIT Connection for SAP systems with SAP Router

Hello!
We are trying to integrate all the remote SAP systems and their databases (primarily Oracle) into DBACOCKPIT of SAP Solution Manager 7.1.
Our SAP Solution Manager is running on Windows with Oracle 11.2.0.2
The most SAP systems (Unix and Windows) can only be reached from SAP Solution Manger over the SAP Router connection.
It means no direct ping from Solution Manager server to the Server of managed system will work.
Question
Is it possible to integrate such SAP systems (with SAP Router) into DBACOCKPIT of Solution Manager?
According to sap note 1265134 only the DBCON-connection will be required.
By doing so (tcode SOLMAN_SETUP), we get TNS errors.
Do we miss some additional steps (adapting tnsnames.ora of SOLMAN with the entry of managed system), etc.?
Thank you!
regards

SAP-SDN wrote:
> We of course can reach these systems via SM59.
>
> The question still is whether or not the several SAP systems with Oracle that can be reached from Solution Manager over SAP Router can be integrated into DBACOCKPIT of SAP Solution Manager in order to gather/ analyze performance data?
Systems can be reached via SM59, then what's the problem ?
In fact, this 'is' the standard procedure. This is as normal as you could have Solution manager in same 'network' with rest of the remote systems.
Answer should be yes, you can manage several remote sap systems from sap solution manager dbacockpit.
Thanks

Similar Messages

Webinar- Connect Third Party Systems with SAP B1 – DI API, DI Server, B1WS

Webinar happened on 21st August.
Get the Presentation, Video recording and answers of all the questions asked in the webinar through the below link.
Webinar- Connect Third Party Systems with SAP B1 - DI API, DI Server, B1WS

Hi Oleksiy,
I don't see anything strange in your code. You should receive an error message but it shoudn't loop without end ;o(
The only thing I can propose you is to create a message for support, they will have a deepest look into your problem.
Regards
Trinidad.

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

App.server load balancing for SAP System with 1 PS

Hi,
In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer.
After activating the "App.server load balancing" setting in SAP system definition the application servers are becoming visible in CPS with their load factors (number of BGD wp's on app.servers) and load numbers (number of active jobs on app.servers).
This is so far fine, but the additional functionality is not working as I would expect, I have issues with 2 functionalities:
1. Based on documentation after activating also the XAL connection the CPS should submit the job on app.server with best performance based on XAL monitoring data filling the TARGET_SERVER parameter.
This functionality is not working for me at all
2. A useful functionality after activating the "App.server load balancing" setting is that the ProcessServer is going to "Overloaded" status when all BGD wp's of SAP system are occupied, thus restricting submitting new jobs during overload situation. But I had an issue also with this functionality, after SAP system recovery from overload situation, the CPS still remained in Overload status (so no new jobs were submitted).
As a workaround I had increased the treshold values for loads on all app.servers for this SAP system, what was fine for several days, but after a while I believe this was a reason of unexpected performance issues in CPS, therefore I have deactivated the 'App.server load balancing" setting at all for this ProcessServer.
I would appreciate your feedbacks with this functionality.
Thanks and Regards,
Ernest Liczki

Hi Preetish,
This connect string option is to loadbalance RFC connections. These are balanced upon login, once you are connected to a particular application server (AS) you stay on that server until you reconnect.
Since CPS uses multiple RFC connections, this will result in the connections being distributed over the available AS resources which is fine as long as they are generally evenly loaded. If you have certain AS hosts that are continuosly more loaded than the rest, then you probably don't want the CPS RFC connections to end up on these servers.
The original question is about loadbalancing of batch jobs over the available AS resources, and this is done independent of the RFC connection load balancing. Even if all CPS RFC connections are pinned to the DB/CI host, you can still loadbalance jobs over the available SAP AS hosts, either by using SAPs builtin balancing, or the CPS algorithm by activating the checkbox as indicated in the first entry in this thread.
Finally, to reply to Ernest's question: I believe there are some fixes on the app load balancing in the latest release, M26.17 should be available on the SWDC now.
Regards,
Anton.
Edited by: Anton Goselink on May 29, 2009 9:06 PM

Integration of SAP Cloud for Customer with third party / legacy / non-sap system using SAP Netweaver PI

Hello,
has anyone experience with the Integration of a 3rd Party System with SAP C4C using SAP Netweaver Process Integration?
Is this a process of days, weeks or months?
Any documentation on this?
I am thankful for every Input!
BR, Roman

Roman,
Please read through the integration guides available on the SAP service marketplace as they address this specific topic in great detail.
http://service.sap.com/cloud4customer
The time duration of the project depends on the business process complexity being resolved and the level of integration desired between the different enterprise solutions in the landscape.
Thank you.

Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?

hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,

Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol

How we can integrate ep system with SAP R/3 system

I want to integrate SAP EP(7.0) system with SAP R/3.Can any body guide me the step by step method to integrate the above two system.
How we can configure SLD with J2EE engin?How we can established the JCO connection?
Thanks
Kundan

Hi,
Why don't you use search functionality in SDN? You can get lots of guides. This question is repeated lots of times.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/how%252bto%252bconnect%252bto%252bsap%252br3%252bsystem%252bthrough%252benterprise%252bportal%252b7.0%252busing%252ban%252biview.
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3d7db2e5-0601-0010-4a88-9f3498f8142f
Regards,
Harini S

Integrating SAP System with Third Party Software

Hi,
I am working on an implementation project and need to integrate SAP system with a third party system. SInce I am a functional consultant, I am finding it tough to understand the integration issues. Can somebody explain me how to link up the two systems and what are the various tools available for this ?
Regards,
Rohit

Hi,
Inorder to integrate various systems we have various interface methodologies provided by SAP.
SAP systems use the following interface technologies:
ALE: Application Link Enabling
BAPI: Business Application Programming Interface
CPI-C: Common Program Interface Communication
EDI: Electronic Data Interchange
HTTP: HyperText Transfer Protocol
LU 6.2: Logical Unit Type 6.2
RFC: Remote Function Call
OLE: Object Linking and Embedding
SMTP: Simple Mail Transfer Protocol
SOAP: Simple Object Access Protocol
TCP/IP: Transmission Control Protocol / Internet Protocol
XML: Extensible Markup Language
In general we use ALEs and BAPIs.
The ALE uses IDOCs as the data transfer medium and need various middle ware systems inorder to receive and process these IDOCs.
BAPIs use Remote enabled functions which can be accessed from any platform also using any language ( like JAVA, VB etc).
Thanks and regards.

Installing SAP system with MSCS

Hi,
Anyone can give me the steps for installing a SAP system with MS cluster?
Window server 2003, MS. SQL 2005, SAP ECC6.0
Regards
Chin

Hi,
Refer SAP Installation guide in http://service.sap.com/instguides
I will give an overview about the installation process.
Basic setup of MSCS 5.2 for SAP involves 2 systems, we will name it as node A(First MSCS node) and B(Additional MSCS node)
3 Cluster groups should be created for SAP, Database, Quorum
MSCS should be configured between node A and B, test the cluster by moving the groups between node A and B. Its very important to note that, Quorum disk group should not be taken offline. If its goes offline there are chances of cluster getting crashed.
Steps to be followed for SAP Cluster Installation
     In Cluster Admin, move the disk groups and shared disks to first MSCS node.
     On the first MSCS node, install the MS SQL Server 2005 64-Bit
             In Cluster Admin, move the disk groups and shared disks to Additional MSCS node.
     On the Additional MSCS node, install the MS SQL Server 2005 64-Bit
     In Cluster Admin, move the disk groups and shared disks to first MSCS node.
     Install the Central Services Instance for ABAP (ASCS) on first MSCS node.
     Install the Central Services Instance for Java (SCS) on first MSCS node.
     Cluster the First MSCS node
     Install the Database Instance on the First MSCS node
     Cluster the Additional MSCS node
     Install Enqueue Replication Server for ABAP and Java(Optional)
     Install the Central Instance
     Install at least one Dialog Instance
Before starting the installation, make sure that system logged on as Cluster Administrator.
Hope it helps
Regards
KT

Problem connectivity of Web Dympro with SAP Netweaver

Hi guys,
I've a problem connectivity of Web Dympro with SAP Netweaver
I installed Sap NW in a machine on the local network with IP 192.168.x.y, and I can connect to it without problems; I can use the portal and implement jobs in Visual Composer.
After installing Sap Developer Studio, I connected it successfully to the NW through the menu "Preferences->SAP j2EE engine" selecting the option "SAP J2EE is installed on remote hosts" and inserting IP address of the machine with NW (192.168.x.y) and port 3900.
Using these parameters the logon works, in fact I can see the tab "J2EE engine".
The problem is that when I try to make the deploy, Web Dynpro asks me the SDM password (that I'm sure I've inserted correctly) but it returns the following error to me:
Deployment aborted
Settings
SDM host : SVR-NW
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
Result
=> deployment aborted : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2010.09.01.07.31.29':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [svr-nw] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
I want to add that I use Win XP Prof, and I set the same credentials (user "Administrator" and the correct password) I used on the machine where SAP NW is installed.

Hi Michele,
There were 2 cases I explained, and the second was the one in case your SDM was blocked. Did you try the first one?
Anyways, here is something more that you can try to get it working. In case the SDM password is valid, did you log into the portal as the Administrator? If yes, then you must have been asked to change the password. If you did change the password there, login to the remoteGUI using the Master password (abcd1234) and change the password there also to the same password you use for Administrator on the Portal. Now try again.
In case the above doesnt work, start the configtool.bat from \usr\sap\J2E\JC01\j2ee\configtool and go to secure store. Here define the J2E passwords again (the same new password you gave for the Administrator in the portal), save and restart the server. I think it would work then
Hope that helps you out!
Bye,
Sameer
P.S - the main thing is that the error you got was Authentication failure using the Administrator username. Thats why you have to make sure that the password for the SDM is the same as what you gave for the Administrator login in the portal. So after you login into the remoteGUI, CHANGE the password to what you have for the Administrator(just like the one in the portal).
Message was edited by: Sameer Jagirdar

Trouble in a SAP system with load balancing

Hello masters:
I had a trouble with workitems that came from a SAP system with load balancing. They doesn't receive the workitem ID in the UWL.
I created another system in the portal as a "dedicated application server", and made the necessary configuration in order to replace the first one, and then my workitems worked fine.
However, I would like to know what appened with the first system created as "system with load balancing". Why this system didn´t pass the workitem ID to the application (web dynpro abap) that execute the workitems?
Thank you.

I hope there was some missing configuration in the first case which was not replicating the workitem from SAP Inbox to UWL.
Thanks
Arghadip

How to connect MS-sql server with SAP BW

hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.

Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful...

Is it possible to install two SAP system with same SID but different instance numbers on one host?

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
If yes, then how?
If no, then why?
Thanks in advance.
Regards,
Sarim

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
The next issue will be with the SAP file systems like /sapmnt/SID
The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
These are few of the many problems I can think of.
So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
Regards
RB

Plz send step by step process for Outlook integration with SAP

Hi Basis experts
Plz send step by step process for Outlookexpress integration with SAP.
plz send if anybody have at the earliest.
advance Thanks& regards to all
Supriya

Dear Supriya,
If it is in SAP then please go through the below mentioed site
http://www.duet.com/
please tell me where in you want to integrate?
Outlook Configuration with SAP-EP is a PPT file.
please mail me your id i will send it accross.

DBACOCKPIT Connection for SAP systems with SAP Router

Similar Messages

Maybe you are looking for