DBACockpit - External MSSQL Error

Hi All,
I'm trying to establish a connection to an external MSSQL server in Solution Manager DBACockpit following sap note 1316740.
However when I run the connection test I get the following error :-
-- ERROR The version of the monitor schema is impermissible (should be/is: 0610.0800.0007/ )
What is this and how do I fix it?
Thanks
Craig

Doesn't matter I read sap note 1774329, which lead me to the fact the version of the Microsoft SNAC was out of date.  Updated this and redid the whole configuration and now fixed.
Cheers
Craig

Similar Messages

  • Error when loggong on for external ID "": Error during SAML 2.0 logon

    Hi,
    I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
    N  SAML20 SP (client 400): Incoming Response
    N  SAML20 Binding:          POST
    N  SAML20 IdP Name:         http://xxxxxx/adfs/services/trust
    N  SAML20 Status Code:      urn:oasis:names:tc:SAML:2.0:status:Responder
    N  SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
    N  SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
    N  *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c       16519]
    N  {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
    N  *** ERROR => SAML-Trace: Returncode = 222 [sign.c       16519]
    N  *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c       16519]
    N  *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c       16519]
    I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
    I have added the identity provider through transaction SAML2, but it does not seem to be working.
    Here is a decrypted SAML assertion:
    <samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
      Version="2.0"
      IssueInstant="2015-04-02T00:21:06.477Z"
      Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
      Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
      InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
      xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
      >
      <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
      <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
      <ds:SignedInfo>
      <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
      <ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
      <ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
      <ds:Transforms>
      <ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
      <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
      </ds:Transforms>
      <ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
      <ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
      </ds:Reference>
      </ds:SignedInfo>
      <ds:SignatureValue>xxxxxxx</ds:SignatureValue>
      <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
      <ds:X509Data>
      <ds:X509Certificate>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</ds:X509Certificate>
      </ds:X509Data>
      </KeyInfo>
      </ds:Signature>
      <samlp:Status>
      <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
      <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
      </samlp:StatusCode>
      </samlp:Status>
    </samlp:Response>

    Hi Brian,
    I am not sure but you could check below thread and couple of sap note.
    Single Sign On - Sharepoint 2010 to SAP using ADFS
    1799402 - Automatic account creation for SAML 2.0 SP
    1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
    It may help you to resolve / identify the cause of the issue.
    BR
    AKJ

  • IMac G5 won't boot, external interrupt error

    I started my iMac G5 and did get the chime but it automatically goes into OF mode. The fans run loudly and it continously scrolls an "external interrupt" error with a bunch of jargon that goes by so fast I can't read it.
    I tried resetting SMU, none of the bootup key sequences work, I can't boot from disk and it won't go into target disk mode. I've searched online "external interrupt" which has been an issue for others, but haven't found an answer to the problem yet.
    I just tried resetting SMU again. This time I got the chime again, but now have a black screen. After about 30 seconds of nothing the fans start running and the screen remains black. Help please!

    Worth trying a few more times:
    Resetting the SMU on a G5 iMac:
    http://support.apple.com/kb/HT1767
    and on resetting the PMU on a Power Mac G5, G4 and G3 :
    http://support.apple.com/kb/HT1939?viewlocale=en_US
    http://support.apple.com/kb/HT1436

  • XML parsing error: xml processing instruction not at start of external entity (error code 17)

    I created a form and recieve the filled in form by email from participants. It has always worked in the past. Recently when importing data into the master form (from filled in forms in xml files sent by applicants) I am getting this error message..."xml processing instruction not at start of external entity (error code 17), line 2, column 1...." pointing to the file of data (xml) I am trying to input.  If I pull up old data forms (from 2009) they work, but now I am getting this error.  I run Adobe Design Premium CS3 for Windows.  Can anyone tell me what to do to fix?

    I created a form and recieve the filled in form by email from participants. It has always worked in the past. Recently when importing data into the master form (from filled in forms in xml files sent by applicants) I am getting this error message..."xml processing instruction not at start of external entity (error code 17), line 2, column 1...." pointing to the file of data (xml) I am trying to input.  If I pull up old data forms (from 2009) they work, but now I am getting this error.  I run Adobe Design Premium CS3 for Windows.  Can anyone tell me what to do to fix?

  • "Auth type not supported by External DB" error for web-auth SSIDs

    Hello
    We're having a problem with web-authentication on our 4404/WisM controllers since we moved to software rev 5.x (currently running 5.1.151.0).
    With software rev 4.x our web-auth SSIDs would send the authentication requests to a Cisco ACS4.0 which would then authenticate the users against MS Active directory.
    Now (with rev 5.x) the same SSIDs cannot authenticate users against AD, the error in the ACS is:
    Auth type not supported by External DB
    Found the following Cisco Doc regarding the problem: Cisco Secure ACS and Windows AD EAP/802.1x port authentication fails with the Auth type not supported by External DB error message - Case Number K24308566. Done a packet capture on ACS to see authentications coming in and the ones that fail with above error are using CHAP - from the Cisco documentation, MS AD doesn't support CHAP.
    Any ideas on how I can get the web-auth working again with software rev 5.x ?
    Thanks
    Andy

    my apologies - theres a setting under Controller - General for Web Radius Authentication. changed this from CHAP to PAP and its now working ok.

  • Cannot delete files from external HD error code-50

    I keep getting error code-50 when trying to delete a file from my external HD (western digital).  I've restarted everything, it is not a special character problem.  I have been using this HD for about a year and this problem just recently started.  Also I cannot run disk utility verify because the HD does not show up in disk utility.  Not sure if it ever did but I never had problems until now.

    beecazz wrote:
    Also I cannot run disk utility verify because the HD does not show up in disk utility.
    That sounds like cause for concern, but I don't know whether it's connected with the -50 error.
    Do you have backup to restore from if things take a turn for the worse?
    For the deleting problem you could look at the following link. Trash It! seems to solve many Trash problems:
    http://www.thexlab.com/faqs/trash.html

  • Unable to open external list : Error : Unable to render the data. If the problem persists, contact your web server administrator.

    Hi,
    Please note we are using SQL Server 2008 for sharepoint. Does it matter for this issue?
    Please help.
    Thanks.

    Hi,
    According to your post, my understanding is that you failed to open external list.
    Please change the External Content’s connection properties’ Authentication Mode to BDC identity.
    Then launch the SharePoint 2013 Management Shell and run the PowerShell commands to remove the error.
    Here is a similar thread for your reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/69d937e6-f4a3-40e0-b57f-67cddb4ed12e/sharepoint-2013-unable-to-render-the-data-if-the-problem-persists-contact-your-web-server?forum=sharepointcustomization
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • External Table Error

    While Creating an external table I got following error
    ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-00554: error encountered while parsing access parameters
    KUP-01005: syntax error: found "missing": expecting one of: "badfile, byteordermark, characterset, column, data, delimited, discardfile, disable_directory_link_check, exit, fields, fixed, load, logfile, language, nodiscardfile, nobadfile, nologfile, date_cache, processing, readsize, string, skip, territory, varia¿gÀ"
    KUP-01007: at line 2 column 14
    ORA-06512: at
    My CREATE TABLE Syntax is as follow
    CREATE TABLE APPL_NOTE_EXT
    CUS_ID NUMBER(10),
    TEXT VARCHAR2(2000 ),
    PAGE_NUM NUMBER(3)
    ORGANIZATION EXTERNAL
    ( TYPE ORACLE_LOADER
    DEFAULT DIRECTORY EXT_TABLE
    ACCESS PARAMETERS
    RECORDS DELIMITED BY newline
    MISSING FIELD VALUES ARE NULL
    FIELDS
    CUS_ID POSITION (2:10) ,
    TEXT POSITION (39:1737),
    PAGE_NUM POSITION (13:14)
    LOCATION ('APPNOTES.TXT')
    REJECT LIMIT Unlimited
    NOPARALLEL
    NOMONITORING;

    This is the result I obtained after creating the table with your script:
    Table created.
    SQL> desc APPL_NOTE_EXT
    Name                                      Null?    Type
    CUS_ID                                             NUMBER(10)
    TEXT                                               VARCHAR2(2000)
    PAGE_NUM                                           NUMBER(3)The only issue I faced was the directory object. I had to create it. May be you don't have privileges on the specified ext_table directory. Please verify.
    ~ Madrid

  • Release of External Activities - Error

    Hi all,
    I am trying to release few external activities for which Info Rec field is present. I have entered all the external purchasing parameters for the external activity like Vendor, Purchasing Group, Material Group, Info Rec but it is giving me the error while releasing the external activities:
    "Procurement w/o material from vendor with plant assignment not defined".
    Then when i click on tick button again i get one message stating "Purchase Requisition cannot be generated for this activity"
    My requirement is that when i release this external activities, it should generate a purchase requisition. I have set the Purchase Req. field to "After Release" as well but still it is not working.
    Can anyone please help me with this. Hope to hear from you all.
    Kind Regards,
    Mayuresh Ayachit.

    Hi Ramesh,
    You are right. But my requirement was when you enter Info Rec purchasing data like Vendor, Material group is copied into your external activity. Then you set the Purchase Req field to "After Release" and when you release the external activity, a Purchase Requistion is generated.
    But when i do this i get the error as i described before. I tried doing what you said and that works. I have one more question for you. Do you know what the system status "EOPD" (External Operation Partially Delivered) means. What is the significance of this status and when do you get it?
    Regards,
    Mayuresh Ayachit.

  • Copying Files To/From External Drive: Error -36

    I recently purchased a WD 700 GB drive that I'm using as a network drive using AirportExtreme. Today, while trying to copy files from either of my internal drives to the WD drive, I get error -36 messages. If I'm copying a folder of files and click on the option "skip" after receiving an error message for a particular file then the entire copy transaction aborts. I have taken the following steps:
    1) Disconnected WD from netywork and connected it directly to my G5.
    2) Ran Disk Utilities and got 1 error on 1 of the 3 partitions which was repaired.
    3) Re-ran Disk Utilities and got no error.
    Tried moving folders of files and groups of files from WD to G5 and received same error -36 message.
    Tried moving folders of files and groups of files from G5 to WD and received same error -36 message. Cannot move even a single file - of ANY size - w/o getting error -36 message.
    4) Checked permissions and "ignore ownership" settings on volumes concerned then logged in under root.
    Same problem continues. Tried moving files between my internal drives - no problem. Now here's the thing: the only files I have moved to the WD drive thus far are my music files. The iTunes Library on my G5 is pointed at an iTunes folder with these files inside. Last 2 weeks or so there's been no problem.
    I NEED TO GET THESE MUSIC FILES OFF or COPIED or BURNED to another disk. In that vein I tried:
    5) Unsuccessfully creating an image file of the files on the WD but always ended up with a much too small and empty .dmg file.
    6) Burning files to DVD - same error -36 messages.
    7) Repaired permissions on my G5 - just 'cause. No help.
    8) Re-ran Disk Utilities on WD: repairs not needed.
    9) Re-booted; error -36 messages continue to pop up.
    I'm at a loss as to what to do and am especially peeved because I bought the WD at the suggestion of a clerk at the Apple Store even after I pointed out to him that the WD was getting very mixed reviews on Apple's site. I'm not angry with the clerk but at myself for purchasing the WD even with my misgivings.
    How can I copy to another disk the ONLY copy of my music files from the WD drive so I can either reformat or return it?
    Dual 2 GHz G5, 17" MacBook Pro, MacMini, Apple iPhone   Mac OS X (10.4.10)   2 Apple 20" Cinema Display, Proview 17" display, External Acomdata Disk Drive

    A couple of ideas:
    1. Do you have an iSight camera or an iPod connected to another Firewire port? If so, unplug them so that the only Firewire device is the drive.
    2. Unplug everything except the keyboard and mouse and download and reapply the 10.4.10 COMBO update. Make sure no other program is running when you apply the update, and do nothing whatsoever until the update finishes.
    3. Have you tried plugging the drive into another computer to see if it works? If so, copy files off on the other computer and burn them from there.
    4. Does your iTunes work and access the files? Have you tried creating CDs from iTunes?
    If all else fails and you have a spare drive slot in the G5 that will take the type of drive in the enclosure, you could always try removing it from the enclosure and putting it into the G5 and see if it works there. The problem could be the innards of the drive enclosure rather than the drive itself.
    Francine
    Francine
    Schwieder

  • Trying to backup my MacBook Pro onto my External Harddrive, error

    I am trying to backup my Macbook Pro onto my External harddrive (the same one I always do), and for some reason all of the sudden I get the error message that says that the backup disk is not available. When I click on the time machine icon at the top it just says that the latest back up is just delayed. What should I do?

    Your query strongly suggests that you are using thiis particular HHD for Time Machine backups.  It seems that your MBP simply is not recognizing the HDD.
    When connected it should appear on you desktop.
    If it does not, I would connect another HDD to determine if there is an issue with the Time Machine drive.  If another drive is recognized then use the same USB cord with the Time Machine drive.  If still no success, make an appointment with the Apple Store Genius bar and bring the drive along with your MBP.
    Ciao.

  • Can't back-up MBP hard drive to external, getting errors

    I am trying to back up my hard drive to an external (WD My Passport Essential SE) in Disk Utilities (after booting failed). Was getting error-61 until I changed the external format to Mac OS X compatible. But now I am getting an input/output error.
    I'm probably going to need to erase my HD and reinstall Lion, so I HAVE to back-up. I really could use some guidance.

    RoobeeLee wrote:
    Well, FYI: turns out that it was all due to a bad hard drive (wouldn't mount?). So the HD was replaced, and a valuable lesson was learned: Back-Up before you have a problem! Thanks for your input.
    Murphy, that infamous foe, does have the habit of showing up at the most inopportune of moments.
    ds store wrote:
    Use a powered USB hub with port powered drives.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents
    Or use FW drives while you still can. MUCH better performance and since the FW bus has 1.5A available for the peripheral, vs the USB's 0.5A, can handle a wider range of buspowered drives, especially the terabyte monsters.

  • Conflict between Logic Pro and external device error in Logic Pro X./cpu problems

    hi Logic users,
    using a MacBookPro 15 inch Retina, 2,7 GHz intel Core i7, 16 GB Ram, OSX 10,8,5, Logic X 10.0.4.
    i am wondering if you can help me out with the following problem i cant solve:
    when starting logic x with a not too big arrangement, lets say using one third to half of cpu, i open u-he plugin Diva and the cpu is going up on full range and the following error appears: "sample-rate 39299 (number always changes) reconized. Check conflict between logic pro x and external device"
    as external device im running a VirusTi and as audio-device Apogge Duet. when dis-connecting both devices, i have the same problem.
    putting the sample buffer up to the highest rate, doesnt change anything.
    same arrangements on friends computers dont show that problem, so it has to be something wrong in my set up.
    anybody has an idea?
    would be much appreciated for your help,
    thanx-

    Have you used Diva's preset Accuracy system to reduce CPU load?
    accuracy
    Click on the Main button at the bottom of the window. To the right of the Master section are two selectors called Accuracy and OfflineAcc. In the current version of Diva these are global parameters i.e. they remain fixed across all presets, per loaded instance:
    draft........CPU-friendly, but FM will sound rough and resonance is primitive i.e. NOT zero delay! fast......... Fine for older computers and/or when you need more polyphony in acceptable quality great...... The best compromise between quality and polyphony on high-power computers divine..... Top-quality zero delay feedback filters... but can your computer can handle it?
    OfflineAcc only has two options – same or best (i.e. divine in the current version).
    Some host applications may have problems rendering to audio at the selected accuracy, but the
    better ones include an “inform plug-ins of offline rendering status” or similar.
    I typically work in draft mode and then switch to Devine or best when freezing the track or bouncing the entire project...

  • External table error in windows environment

    Can i create external table from directory which is on network drive not on local server where oracle is intsalled. I am receiving follwoing error when I try to query external table poinittng to directory object on network drive in windows. Thanks
    ERROR at line 1:
    ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-04063: unable to open log file BRIDGIES_EXTERNAL_4564_4844.log
    OS error The system cannot find the file specified.
    ORA-06512: at "SYS.ORACLE_LOADER", line 19

    I suspect not. Copy the file to a local disk location, point the directory or a directory to it, update the external table definition if necessary, repeat. If this run works then you have your answer.
    HTH -- Mark D Powell --

  • External definition error

    I am trying to import the following XSD as an External Definition in Repository.
    I am getting the following Error. Please help me.
    Error
    Activation of the change list canceled
    Check result for External Definition Request | http://ABC.COM: Document check found errors 
    Cause: The loaded document does not contain valid XML 
    Error when parsing XML document com.sap.aii.utilxi.xml.xdom.XDOMException$ParseError: Error when parsing the XML document (External entity from address http://xml.cxml.org/schemas/cXML/1.2.014/cXML.dtd in XML document is not supported
    XSD
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE cXML SYSTEM "http://xml.cxml.org/schemas/cXML/1.2.014/cXML.dtd">
    <cXML payloadID="[email protected]"
          timestamp="2005-01-13T00:00:16+00:00">
       <Header>
          <From>
             <Credential domain="NetworkId">
                <Identity>AN13000000259</Identity>
             </Credential>
          </From>
          <To>
             <Credential domain="NetworkId">
                <Identity>AN01000000001</Identity>
             </Credential>
          </To>
          <Sender>
             <Credential domain="NetworkId">
                <Identity>AN13000000259</Identity>
                <SharedSecret>abracadabra</SharedSecret>
             </Credential>
             <UserAgent>Our Procurement System 3.0</UserAgent>
         </Sender>
       </Header>
       <Request>
          <GetPendingRequest lastReceivedTimestamp="2005-01-12T00:00:25+00:00"
                maxMessages="20">
             <MessageType>StatusUpdateRequest</MessageType>
          </GetPendingRequest>
       </Request>
    </cXML>

    Hi,
    The structure that you posted dose'nt look like XSD its like a XML. Actually you have created a Schema based on DTD and not XSD. Did you use Altova to create this, then please select W3Schema instead of DTD while creating it.
    The following is the strucutre I got when I created using the XML you have posted.
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
         <xs:complexType name="CredentialType">
              <xs:sequence>
                   <xs:element ref="Identity"/>
                   <xs:element name="SharedSecret" type="xs:string" minOccurs="0"/>
              </xs:sequence>
              <xs:attribute name="domain" type="xs:string" use="required"/>
         </xs:complexType>
         <xs:element name="Identity" type="xs:string"/>
         <xs:element name="cXML">
              <xs:complexType>
                   <xs:sequence>
                        <xs:element name="Header">
                             <xs:complexType>
                                  <xs:sequence>
                                       <xs:element name="From">
                                            <xs:complexType>
                                                 <xs:sequence>
                                                      <xs:element name="Credential" type="CredentialType"/>
                                                 </xs:sequence>
                                            </xs:complexType>
                                       </xs:element>
                                       <xs:element name="To">
                                            <xs:complexType>
                                                 <xs:sequence>
                                                      <xs:element name="Credential" type="CredentialType"/>
                                                 </xs:sequence>
                                            </xs:complexType>
                                       </xs:element>
                                       <xs:element name="Sender">
                                            <xs:complexType>
                                                 <xs:sequence>
                                                      <xs:element name="Credential" type="CredentialType"/>
                                                      <xs:element name="UserAgent" type="xs:string"/>
                                                 </xs:sequence>
                                            </xs:complexType>
                                       </xs:element>
                                  </xs:sequence>
                             </xs:complexType>
                        </xs:element>
                        <xs:element name="Request">
                             <xs:complexType>
                                  <xs:sequence>
                                       <xs:element name="GetPendingRequest">
                                            <xs:complexType>
                                                 <xs:sequence>
                                                      <xs:element name="MessageType" type="xs:string"/>
                                                 </xs:sequence>
                                                 <xs:attribute name="lastReceivedTimestamp" type="xs:string" use="required"/>
                                                 <xs:attribute name="maxMessages" type="xs:string" use="required"/>
                                            </xs:complexType>
                                       </xs:element>
                                  </xs:sequence>
                             </xs:complexType>
                        </xs:element>
                   </xs:sequence>
                   <xs:attribute name="payloadID" type="xs:string" use="required"/>
                   <xs:attribute name="timestamp" type="xs:string" use="required"/>
              </xs:complexType>
         </xs:element>
    </xs:schema>
    Thanks,
    Prakash

Maybe you are looking for