Dbca does not come out after 100%

I have installed and configuredthe Oracle 9i Rel2 on RH Linux 9.
When I followed dbca steps to create a database, it does not come out after reaching 100%. I had to kill the process to end it. What could be reason? Because of this the init<SID> file is also not created.
Please explain
Mehul Trivedi

I have installed Oracle9i on RH9 and I was able to use
the dbca and really If your swap values in the OS are fine
I do know whatelse you can check.
If you want to create a database and the dbca is not
functioning you have another option ( Create it manually )
Chapter 2
Administrator's Guide Contents / Search / Index / PDF
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96521.pdf
Joel P�rez

Similar Messages

  • MBP does not come back after hybernation

    Hello everyone,
    I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
    I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
    I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
    The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
    I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
    When I turn it back on the second time, it boots up.
    Anyone else have a problem with this?
    Thanks for listening!
    Mark

    Hello Gweedo!
    Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
    http://discussions.apple.com/thread.jspa?threadID=1394449
    I have been perusing through that topic and hopefully they will come up with a fix for this.
    The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
    This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
    I even have the 'smartsleep' installed.
    Thanks for commenting everybody!
    Mark

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • External hard drive does not come out in desktop

    greetings! whenever i plug in an external hard drive or a USB flash disk through usb, it does not come out in the desk top. before, it used to come out, now it doesn't. i am still using the exact macbook. i think i touched something in the settings. please help

    Go to finder and choose preferences under finder in the menu bar. Now check and see if under General you have the choices clicked of what you want to show on the desk top.

  • Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

    Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
    I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
    Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
    I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
    I'm using Firefox 30.0 and Windows 7 (64 bit).
    Thanks.

    Hi moose53,
    Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
    If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

  • I have a disk in my mac and came not get it out?  I use the command E key to eject but it does note come out?

    I have a disk in my mac but it does note come out useing command e to eject? how do i get it out or do I have to get it jixed?

    Force eject a stuck cd/dvd
    First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
    If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
    Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
    If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
    Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
    Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
    If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
    Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???,

    My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???

    Return it for a warranty replacement.

  • Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

    Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

    so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

  • System does not come up after homogeneous system copy

    Hi there,
    after a regular system copy of our Java-only Portal the system does not come up.
    'startsap' warns with these messages :
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/jdbdictionary/jddi.jar file stated but does not exist !
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/ext/antlr/antlr.jar file stated but does not exist !
    Warning : /usr/sap/SPE/JC51/j2ee/cluster/bootstrap/../server0/bin/system/frame.jar file stated but does not exist !
    and, yes , these really important directories do not exist - under /usr/sap/<SID>/JCxy/j2ee/cluster/server0 there is
    only ONE directory , which is 'apps' .
    database starts, but not the j2ee engine
    OS :Solaris 10, Oracle DB
    I'm confused (i did the system copy 2 times, because I did not believe what I saw ....)
    Regards,
    Ronny

    >
    Sunny Pahuja wrote:
    > Hi,
    >
    > Have you done system refresh with sapinst ?? was it successful or not ?? Could you please paste dev_server, std_Server and dev_dispatcher logs here ?
    >
    > Thanks
    > Sunny
    Hi Sunny,
    thanx for your answer.
    There are NO logs, either dev_server* nor dispatcher.
    the only thing I found were under the work-directory, the dev_jcmon says :
    [Thr  1] Wed Oct 27 11:01:40 2010
    *[Thr  1] *** ERROR => Can't attach to administration shared memory (rc = 3) [jcmonxx_mt.c 228]*
    and the bootstrap says mainly that it could not find the framework :
    [Thr  1] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr  1] JLaunchRequestQueueInit: create pipe listener thread
    [Thr  2] JLaunchRequestFunc: Thread 2 started as listener thread for np messages.
    [Thr  3] WaitSyncSemThread: Thread 3 started as semaphore monitor thread.
    [Thr  1] Tue Oct 26 10:00:01 2010
    [Thr  1] SigISetDefaultAction : default handling for signal 18
    [Thr  1] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr  1] CPIC (version=701.2009.01.26)
    [Thr  1] [Node: bootstrap] java home is set by profile parameter
            Java Home: /usr/java
    [Thr  1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SPE/JC51/exe/jvmx.jar
    That make 'sense', because there is nothing  it could find ..
    Regards Ronny

  • Monitor does not come out of sleep Mac-Mini Mini-DVI to Dual  DVI-D cable

    I have an August 2009 Mac-Mini that I'm using with an Apple supplied Mini-DVI to DVI adapter along with a DVI-D Dual Link Cable connect to a Sceptre X7XV-Naga+ LCD monitor.
    The monitor is going into sleep mode on its own with no way to disable this feature on the monitor itself. I've disabled sleep mode on the Mac-Mini in the power setting in System Preferences.
    When in sleep mode and I move the mouse or press a key, the monitor will not come out of sleep mode. From other posts, I read that the issue might be that I wasn't using a Dual-Link DVI-D cable, so I bought one and installed such a cable. That has not resolved the problem. The monitor will not come out of sleep mode. When I have the monitor connected with a mini-display port to VGA adapter instead of a DVI-D cable, it will come out of sleep mode every time.
    Message was edited by: Annorax64

    I know it's a year later, but I'm not finding much through search.
    I have the same exact problem.  Difference being I'm using an iMac with 10.7.5.
    Same video board and monitor - ATI Radeon HD 6750M video card connected via DisplayPort to Samsing S24A850DW.
    I've tried two different mini-DisplayPort to DisplayPort cables and no change.
    I think I read that 10.8.3 might fix the issue.  Anyone that can confirm that, or has another solution?

  • Powermac CD does not come out

    Ever since i got this powermac, it constantly does not spit out cds when i eject. I tried Disk util, Open firmware, unix, finder, mouse at startup, and only mouse at startup works sometimes. Other times, it holds on to it continuosly.
    Please help!
    ( I don't know if this has already been answered or posted)
    it has been through a history of bad hard drive fixing itself, also.
    Powermac G5 Mac OS X (10.4.7) Weird history of Crash Repair
    Powermac G5   Mac OS X (10.4.7)   Weird history of Crash Repair

    There was a series of PowerMac's that got the wrong sized spacers for the superdrive and therefore the tray may not eject correctly due to height problems.
    Contact Apple and give them your serial number.
    If your handy you can switch out the superdrive yourself and Apple will just send you the replacement.

  • HDMI does not come back after disconnect

    Hello Archers,
    this one is bugging me for a while now, perhaps someone has an idea.
    I have a headless ARCH home server that mainly has the following purposes:
    1. being a 24/7 file/backup/ssh server for family and friends
    2. being an MPD server connected to my music system
    The setup may seem a bit exotic. The computer is connected to the music system via HDMI over an S/PDIF audio extractor to the music system. This is because the machine replaced a RaspberryPi that really had crappy analog audio output and my music system has an optical input and can perform the digital to analog conversion itself. I have not installed Pulse just alsa and jack2-dbus.
    aplay -l shows the following:
    **** Liste der Hardware-Geräte (PLAYBACK) ****
    Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC887-VD Analog [ALC887-VD Analog]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
    Sub-Geräte: 0/1
    Sub-Gerät #0: subdevice #0
    The Problem:
    Whenever I switch off the music system and later switch it back on, the HDMI-connection is lost and does not get reestablished. I tried various things but essentially only a reboot of the machine helps (which opposes purpose 1 of the machine). On the RaspberryPi I did not have that problem, probably due to the hdmi_force_hotplug=1 in /boot/config.txt.
    My Observations so far:
    The first problem that made the sound disappear was the screen blanker on the console after 10 minutes. This can be prevented with
    setterm --term linux --blank 0 >/dev/tty1 # You need write permission on /dev/tty1 for this to work!
    There are no appearant error or warning messages when using e.g. aplay or speaker-test, just no sound at all
    There are tipps in the forums/the internet sugesting to disable power management on the display involving xset and xrandr. However, I have no X running and the tools complain that they cannot find/open the display
    In /proc/asound/PCH/codec#2 I find the HDMI codec to show the following as long as it is connected after a reboot:
    Codec: Intel Valleyview2 HDMI
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x80862882
    Subsystem Id: 0x80860101
    Revision Id: 0x100000
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    State of AFG node 0x01:
    Power states: D0 D3
    Power: setting=D0, actual=D0
    GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
    Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
    Device: name="HDMI 0", type="HDMI", device=3
    Converter: stream=8, channel=0
    Digital: Enabled GenLevel
    Digital category: 0x2
    IEC Coding Type: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
    Power states: D0 D3
    Power: setting=D0, actual=D0
    Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
    Converter: stream=0, channel=0
    Digital: Enabled
    Digital category: 0x0
    IEC Coding Type: 0x0
    PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
    Power states: D0 D3
    Power: setting=D0, actual=D0
    Node 0x04 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
    Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
    Control: name="IEC958 Playback Con Mask", index=0, device=0
    Control: name="IEC958 Playback Pro Mask", index=0, device=0
    Control: name="IEC958 Playback Default", index=0, device=0
    Control: name="IEC958 Playback Switch", index=0, device=0
    Control: name="ELD", index=0, device=3
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=01, enabled=1
    Power states: D0 D3
    Power: setting=D0, actual=D0
    Connection: 2
    0x02* 0x03
    Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x80]
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x58560020: [N/A] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x2, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Power states: D0 D3
    Power: setting=D0, actual=D0
    Connection: 2
    0x02 0x03*
    Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x80]
    Pincap 0x09000094: OUT Detect HBR HDMI DP
    Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
    Pin-ctls: 0x40: OUT
    Unsolicited: tag=00, enabled=0
    Power states: D0 D3
    Power: setting=D0, actual=D0
    Connection: 2
    0x02 0x03*
    Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
    After disconnect/reconnect it changes to this:
    Codec: Intel Valleyview2 HDMI
    Address: 2
    AFG Function Id: 0x1 (unsol 0)
    Vendor Id: 0x80862882
    Subsystem Id: 0x80860101
    Revision Id: 0x100000
    No Modem Function Group found
    Default PCM:
    N/A
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    State of AFG node 0x01:
    Power: setting=UNKNOWN, actual=UNKNOWN, Error, Clock-stop-OK, Setting-reset
    Invalid AFG subtree
    I figured that the problem is probably related to powermanagement, so I experimented with powertop. This resulted in a reduced consumption of 1W when idle, which is nice but did not solve the original problem...
    The Questions
    Is there a way to completely reinit the HDMI subsystem just like on a reboot?
    Is there an option comparable to hdmi_force_hotplug=1 on the pi that forces the HDMI signal to stay up?
    Thank You for Your time!
    Best regards,
    Lars

    I can confirm what zofiel said. I have tested it by connecting a TV and HDMI reactivitated by switching from X to console. However, this option only works one time and requires X running in the first place, which I usually have not on a headless server, but it made me think: Obviousely the X server needs to activate the graphics in the first place. Then I came up with an idea for a really messy work around. I could try to remotely start X. Normally, this is not possible and you get:
    % startx
    /usr/lib/xorg-server/Xorg.wrap: Only console users are allowed to run the X server
    xinit: giving up
    xinit: unable to connect to X server: Connection refused
    xinit: server error
    You can force it to work:
    sudo startx
    You get lots of error messages, but HDMI audio is back, even if one kills the X process afterwards with Ctrl+C (Audio stops, but resumes two seconds later). The downside is that starting X with sudo messes up permissions with the x related files in your home directory and you will have problems to use startx afterwards, so it is probably better to use su instead of sudo. If root does not have a properly configured .xinitrc file then one can also just execute the desktop environment directly e.g., for XFCE:
    su - root -c "startxfce4"
    Then kill it with Ctrl+C and you should have HDMI Audio working.
    So now I could pack this in a script followed by some command to kill it, but, well, it is an ugly workaround
    Is there really no better way?

  • Audio does not come out of my left speak

    Hello,
    I just installed a fresh installation of Vista two days ago.
    When I installed it, I had a Sound Blaster Li've! 5. card in my machine, and the card did not work until I installed KM audio drivers (which made only the 2 rear speakers work).
    Today I went out and bought the X-Fi Xtreme Audio card.
    The installation appeared to work, and I installed the Vista drivers from www.soundblaster.com.
    When I go to audio management, and test the speakers, audio comes out of all 5.
    BUT - when Windows Media Player, MediaSource 5, and any other system sound plays... my front left and rear left speakers do not play a thing.
    I know they are working, because when I tried the surround audio from http://www.microsoft.com/windows/windowsmedia/democenter/9series/avquality/wmapromp3/default.htm
    they all played, but when I played stereo... it only came out of front right and rear left.
    ALSO - I can't seem to find the Entertainment Mode, and some other features advertised on the box and guide that came with the CD.
    Does anybody know what I can do to fix these issues? Help would be greatly appreciated.
    Thanks,
    Anthony Coy

    Hello, Alexander meerkat. 
    Thank you for visiting Apple Support Communities.
    I would start with resetting the System Management Controller.  Here is the article on how to process these steps.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Cheers,
    Jason H.

  • My Macbook Pro does not come on after powering off.

    Lately when I power off my Macbook Pro overnight, it does not power on the next day.  Also, now my background is no longer showing.

    Hi ngros,
    Here are some troubleshooting steps for your MacBook Pro not turning on:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    One of the items is to Reset the SMC.  Afte you do that, set your Desktop background again and see if it stays through a restart.
    Thank you for using Apple Support Communities.
    Nubz

  • Pc does not come out of sleep mode, no display on monitor, no response from mouse or keyboard.

    Computer acts as though it is in sleep mode, does not respond to keyboard or mouse input. Confirmed monitor is OK. turning power on and of does not fix this issue. any ideas on how this migt be fixed?

    The key issue is power. Please use this guide to test the PSU.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

Maybe you are looking for