Dbca: how to change template location ?

my disk (windows partition) is corrupted, can't create any file on it.
Want to save my database using dbca (create template with file) - save the templates on another partition or USB-disk.
But I have to change the location where the template will to be created.
default is OH/assistants/dbca/templates..
Any idea?

It fails...
I used:
dbca -silent -createCloneTemplate -sourceSID DEMO1 -datafileJarLocation G:\test -templateName DEMO1 -sysDBAUserName sys -sysDBAPassword lutz11 -maintainFileLocations FALSE
But it did not work:
Informationen aus der Quelldatenbank werden erfasst
4% abgeschlossen
8% abgeschlossen
13% abgeschlossen
17% abgeschlossen
22% abgeschlossen
Datendateien sichern
28% abgeschlossen
88% abgeschlossen
Vorlagendatei wird erstellt
100% abgeschlossen
Weitere Einzelheiten finden Sie in der Log-Datei "D:\app\lkahlenb\cfgtoollogs\db
ca\silent2.log".
He tried to write the log into my corrupted partion, and fails at this point (like dbca interactive - quiclkly ends at template create)

Similar Messages

  • How to change default location of password file ?

    Hi all,
    Can i change the location of my password file from default to any other user defined location ?
    If yes then how ?
    Thanx in advance.
    Deep

    Dad you moved here?
    Can i change the location of my password file ?

  • How to change file location path at run time in OWB 10g

    Hello all,
    We want to load several files with the same name but from different folders into a single table.
    The information about the paths is stored in an oracle table.
    Is there any best practice to achieve this?
    Our approach is to loop on the number of sources and execute the mapping after changing the location path. We found how to make the loop, and have the apropriate OMB command to update the location path, but we are still looking for a way to call this OMB plus command in a process flow or a mapping. Any idea?
    We also succeeded in loading the file from an unregistered location, which is necessary to be able to update the path, but I'm not sure this is really the best approach. Any advise?
    Thanks in advance for your help!
    best regards
    Cedric.

    Hi,
    I can provide you with an idea on this, dont know if it will work or not.
    Suppose, you need to load 5 files in different folder locations into a single table. Call the mapping 5 times in a process flow. If you log in to the database, and go the table all_directories in your target schema, you will find an entry for the actual path of the file you are trying to laod. I think if this path is updated before each run of the mapping, you can load all files into the target table. Only thing you have to do is call a procedure which will update this record in all_directories table with the different locations each time you want and then plug in this procedure before each call to the mapping in a process flow and see if it works or not?
    Regards
    -AP

  • How to change the location of all fotos in the iPhoto library?

    my iPhoto 11 library is stored locally on my macbook.
    however, my fotos (the actualy bits) are stored externally on a NAS box.
    (or in other words: option "Importing: [ ] Copy items to the iPhoto Library" is not checked)
    recently i purchased a timecapsule and i now want to move all fotos from the NAS box to the timecapsule.
    i am looking for a way to batch-change the location of all fotos from let's say "/Volumes/MyNas/..." to "/Volumes/MyTimecapsule/...".
    can this be done? any ideas?
    thank you.
    ps: i know how to deal with xml and .db/.apdb files. so don't be gentle on me ;-)

    Not really unless you search the forums and find the older post describing how to hack the SQLite database to accomplish this
    Or use Aperture which can do this easily
    However if you are using your Time Capsule as a Time Machine bakcup volume it is not a good place to put your photos - if you do you have no backup of them which means that sooner of later you will lsoe them - and sooner or later TM will fill the volume and make it impossible to add photos
    LN

  • How to change datasource location in CR V10

    How to change the datasource location in CR10, I need to use same table in different database. I tried in "Set Datasource Location" but it is not updating to the new one which i have selected. please help me on this.
    Thanks,
    S Aravind.

    Hi Try like this,
    Go to the Database option on the top > Select Set data source option.
    The top portion of the Set Data source Location window shows the current connection and part at the bottom is where you would make a connection to the new database
    Once the connection has been made, select 'one' table from the current connection and then select a matching table in the new connection and click on the 'Update' button. Do this for all the tables one by one.

  • CS5 Installation - how to change shortcut location

    Using the Adobe Application Manager Enterprise Edition for automating the CS5 packag
    e deployment is used and works fine. But I need to change the location of the shortcuts. Don't know how to do that, installing into the root of ProgramMenu Folder needs to be customised for each product and subproduct. Any Idea?

    Edit the install.db file for each package.
    eg, for Photoshop, it is located in \Build\Setup\payloads\AdobePhotoshop12-Core.
    The table containing shortcut details is "CreateLocAlias" and the field name is "directory"
    Or you can use a custom action (VBScript or similar) at the end of the installation, whichever method you prefer.

  • How do change Download location

    Pls how do I change download location in my Firefox

    Link to Mozilla help page on downloads
    https://support.mozilla.org/en-US/kb/find-and-manage-downloaded-files

  • HT5467 How to change the location service set up when the icon is not inactive?

    I can not setting up the location services and change individual location service for each application since the icon are all in the dead icon and I cannot change anything. Is there anyway to make those icons in active?

    Here is what I was referring to - when in Control Center, I have the database locations. (sources, targets, OWF etc). Under a database location I selected the connector/location name under Connectors. When I select Deploy Action to Drop the connector/location name will remain. However, if you were to check in the database or the Repository Browser (Locations Report) you will see that the db link is gone. At this point you can safely modify the Locations info in the Connection Explorer (in Design Center). On the other hand, if you want the location to be deleted all together then now you can delete it in the Connection Explorer panel. If you did the prior drop step then at this point all db link info should be gone from the database.

  • How to change the location value after it is registered

    hello,
    I want to change the location (A) to a new schema. From what I am understanding, I need to unregister the old locatin(A) in repository browser, and then re-register it in control center, and change the schema name to my new target.
    Now, I have unregisted A in the repository browser. When I come back to control center, and click the register, everything is grey out which means I cannot change the value (but i need to change the value for service name and schema), except the password value. and on the top, it says 'this location has not been registered. please complete the location parameters'.But I know on the old version, like owb 9.0.5, the grey out means this location is registered. So I am really comfused now. The location is unregisted, why cant I change the value of this location?
    any suggestion will be appreciated.

    Here is what I was referring to - when in Control Center, I have the database locations. (sources, targets, OWF etc). Under a database location I selected the connector/location name under Connectors. When I select Deploy Action to Drop the connector/location name will remain. However, if you were to check in the database or the Repository Browser (Locations Report) you will see that the db link is gone. At this point you can safely modify the Locations info in the Connection Explorer (in Design Center). On the other hand, if you want the location to be deleted all together then now you can delete it in the Connection Explorer panel. If you did the prior drop step then at this point all db link info should be gone from the database.

  • How to change the location of footnotes?

    I want to change the locations my footnotes.
    Instead of a footnote beneath the box, I want to place it in a different textbox.
    Most easily is to make a textbox on a masterpage and link it with the footnote 'placer'.
    I have attached a sample of I want to display my footnotes. Just beneath the page - separately -
    Thank you very much for reading my question. I hope somebody knows the answer.

    Thank you for your reply.
    Q: "What would you do if there are two or more notes in a column?"
    A: Add one or two more line in the textbox on the master page, plus noting more sources next to each other. Which makes it possible to note approximately 12 sources.
    But really? No way to I can get InDesign's footnotes outside the story's frame? Noway?!
    Really sure about that? I use Adobe CC and I cannot believe that it isn't possible. Serious? I thought you can make every kind of lay-out with InDesign.

  • Using dbca silent mode change the location of datafiles how to force it

    Hello
    usually i create oracle databases using the create database command, however im trying this time to use the dbca -silent -createDatabase -templateName General_Purpose.dbc - i have edited the General_Purpose.dbc to have the control files. datafiles etc to go to a different location other then the $ORACLE_BASE and no luck so far, whatever i do even changing the $oracle_base just dumps all into a location, how can i force it / change it - this is Oracle 11GR2 on linux
    see sample of my General_Purpose.dbc
    <initParam name="control_files" value="/u01/oradata/control01.ctl, /u02/oradata/control02.ctl"/>
    <initParam name="diagnostic_dest" value="/backup/oracle/oradata"/>
    Name id="1" Tablespace="SYSTEM" Contents="PERMANENT" Size="700" autoextend="true" blocksize="1024">/u01/oradata/system01.dbf</Name>
    <Name id="2" Tablespace="SYSAUX" Contents="PERMANENT" Size="512" autoextend="true" blocksize="1024">/u02/oradata/sysaux01.dbf</Name>
    <Name id="3" Tablespace="UNDOTBS1" Contents="UNDO" Size="25" autoextend="true" blocksize="1024">/u01/oradata/undotbs01.dbf</Name>
    <Name id="4" Tablespace="USERS" Contents="PERMANENT" Size="5" autoextend="true" blocksize="1024">/u02/oradata/users01.dbf</Name>
    thank you

    I think you should use :
    [-datafileDestination <destination directory for all database files> | -datafileNames <a text file containing database objects such as controlfiles, tablespaces, redo log files and spfile to their corresponding raw device file names mappings in name=value format.>] [-datafileDestination <destination directory database for all files> |-datafileNames <a text file containing database objects such as controlfiles, tablespaces, redo log files and spfile to their corresponding raw device file names mappings in name=value format.>]Read this please
    http://docs.oracle.com/cd/E17559_01/em.111/e16599/appdx_creating_db_templates.htm#CJACEDCD

  • How to change the location PC suite store files ??...

    I have a N95, and recently install PC suite on my PC, but I can not have all my pictures and videos store in my C: drive because it's my system drive and I would like to have all PC suite's data stored into my D drive, which is my data drive.
    How can I configure (change) the default file location setting of PC suite ?
    Thanks in advance

    the applications in pc suite each work independantly of each other, so you need to dig into the settings of the application you are using and change the default location

  • How to Change the Location of the Anchor Point

    Hi
    Very new to affter effects.... i was wondering if you guys could please tell me how to move the blue anchor for animation of text please.

    If you just want to move the anchor point on your text layer you can do it by hand instead of going in and manually adjusting it from the transform menu as Dave suggested. 
    However, by what you've written it seems like there may be some confusion about what moving the anchor point actually accomplishes.  So just to clarify, the anchor point, or the small crosshair icon usually in the middle or corner of the layer, is actually a customizable location that essentially dictates the center around which the position, scale and/or rotation values will change when your layer is animated over time with keyframes.
    For example, if you would like to move the anchor point so that your text rotates around a point near the corner of the layer, you can press the Y key to activate the Pan Behind Tool and move the anchor point to the corner.  If you have CS6 you can hold down the Command Key to lock the anchor point to the center, corner or edge of your layer.  A little square will appear around the Anchor Point when it's ready to lock.
    If you've keyframed some of the properties on a layer and would like to temporarily see how your layer looks without messing up any animation you've done on it, simply duplicate the layer by selecting it in the Comp's layer panel and going to Edit - Copy and Edit - Paste.  That way you can do whatever you'd like on the duplicated layer wihout harming your original  Then do one or more of the following:
    A.) You can reset all of the trnsform properties of the layer by clicking Reset.  This will set your layer back to it's default transform settings.
    B.) Or, you can delete all of the keyframes on an individual property by clicking the stopwatch again.
    C.) Also, clicking the light yellow diamond next to the Source Name will delete a single keyframe and the arrows on either side will move the playhead from keyframe to keyframe.  You can of course always delete keyframes manually by selecting them in the timeline and hitting delete.  Holding Shift will snap the playhead to each keyframe.
    I hope this helps and if you're still having trouble I highly reccomend you start here to learn After Effects or go here for additional information.

  • How to change the location of rendered files ?

    Hi guys,
    After finishing I was playing around & exploring the SHARE option.
    I did SHARE > MEDIA BROWSER then select Mac & PC. Then I click PUBLISH.
    What happened next was, FCPX starts rendering ! How come it did not prompt & ask me where I want the rendered files to be located at ?
    Upon seacrhing, I manage to locate it at EXTERNAL HARDDISK > FINAL CUT PROJECTS folder.
    How do I change the destination ?
    Thanks

    Tom Wolsky wrote:
    You can't. The Media Browser is a function of working with other applications. It must be in that location for the other applications to recognize it. You can always move or copy the files out of there when you're done. You might prefer Apple devices which has the same sharing options I believe.
    Thanks Tom,
    You are correct.
    For my pupose, I should have chosen Apple Devices instead.
    But I still don't understand what the option Media Bowser is for ? I mean why must other application recognize this file to work ? Can give example ?
    Thanks

  • How to change the location of Apex Listener?

    Dear all,
    after I changed the directory of location of Apex Listener, I got
    Internal Errorwhen tried to access Apex.
    How to fix this problem?
    regards,
    Val

    Hello Valerie,
    probably this problem is caused by the file/directory access rights on the apex.home (the place where the APEX Listener stores its configuration). The default location would be ${java.io.tmpdir} which again defaults to */tmp/apex* in most cases. However, this is mostly a global location, not a user specific one. On the other hand, the files are created with write acces limited to the owner and read access limited to owner and group. So if you try to start with a different user, the APEX Listener tries to use the same location, but cannot access the files as needed and hence fails. root obviously will not have this problem, but I would recommend not to use this account for any service you run.
    You can set a start option to make the APEX Listener use a different location for apex.home that is read-/writable for your current user. This could like
    java -Dapex.home=/home/user/apex -jar ./apex.warOf course you can change the directory to any place that fits to your system.
    For more information on start parameters, you could take a look into the APEX Listeners Install and Development Guide.
    -Udo

Maybe you are looking for