DDIC ACTIVATION error while uploading the patch sapkb70009

hi
when uploading the patch of sap basis in ides , m facing an error of ddic activation and transport error 8 .
pls suggest the reasons after this and help me into it .
Thx & Regards
Shilpa

Hi Shilpa,
You can refer Note 822379 - Known problems with Support Packages in SAP NW 7.0 AS ABAP.
This note describes the problems with SP dependencies , the recommended SP queues etc.
If doesnot help pls provide us the import log
Best Regards
Umesh

Similar Messages

UCCX 8.0 "Error while uploading the file. Please try again."

I was on UCCX version 8.0.2.11003-10 and i was able to upload an script with the same name as an old one (overwrite).
Upgrade to UCCX 8.0.2.11004-12 and now I am receiving the error: "Error while uploading the file. Please try again."
There was a bug CSCth09248 that affected version 7 but supposed to be fixed on version 8 and was fixed on an earlier version. But after moving to a minor patch, problem came back...
Any ideas?

Hi,
I belive the bug was initially opened to fix the issue when uploading script fails when using wizard to configure uccx.
But now they have re-opened the same bug instead of opened a new one for the issue that you have.
I looked at the case attached to that bug, case # 617145545. Below is the problem description that customer has which is same as yours and this bug has been re-opened to fix this particular problem.
When I tried to upload a modified script with an existing file name, the message "script file already exists.
Overwrite existing script file, continue?" comes up and when I select "OK" then,
it dispaly Status "Error while uploading the file. Please try again".
If I remove an existing file first, it will upload fine.
Using UCCX Admin 8.0.2.11004-12 and UCCX Editor 8.0(2.0).
Thanks
Ankita

Error : While applying the Patch 4440000

Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.

Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein

Error While uploading the Function and Function_BP

Hello,
I am getting the following error while uploading the Functions and Funtions_BP using the Rule Upload functions.
com.virsa.cc.comp.Function_upload.onActionUploadFunc(Function_upload.java:302) com.virsa.cc.comp.wdp.InternalFunction_upload.wdInvokeEventHandler(InternalFunction_upload.java:150) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The files which i am uploading the file from the Best practises only.
What is the reason for this error?
Did any one get this error?
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Aug 4, 2009 12:32 PM

Hello Kumar,
Have you uploaded the SAP text and object files? Upload them first and then try to upload functions.
Harleen
SAP GRC RIG

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

(409) Conflict Error while uploading the file into Sharepoint library

Getting the below error while uploading the file into Sharepoint library.
(409) Conflict. at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() at Microsoft.SharePoint.Client.File.SaveBinary(ClientContext context, String serverRelativeUrl,
Stream stream, String etag, Boolean overwriteIfExists
I have used the below code:
ClientOM.File.SaveBinaryDirect(clientContext, "/Shared%20Documents/NewDocument.pptx", memoryStream, true);
Thanks in advance.

May be issue is with path.
https://server/ should be there instead of
subsite path(https://server/path/path)
in the client context
Check the below link
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/fbb38b10-1127-48a6-a65f-0301edd766c4/the-remote-server-returned-an-error-409-conflict-error-while-uploading-files-to-sharepoint?forum=sharepointdevelopmentlegacy

Error while uploading the PAR file of Production to UAT-

Hi Experts,
Could you please help me out in resolving the error which i'm facing while uploading the PAR file.
1. I have downloaded the par file from the production, imported to my NWDS.
2. Made changes to my HeadiView.jsp
3. I want to test my implementation in UAT.So i have uploaded the PAR to UAT system.
4. Below is the error i'm getting from the Log trace.
#1.#D27E2000F002008200000020000BD0FE0004436CD4EBF6C2#1200034614604#com.sap.porta
l.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#BVISHALA#17971##adcapsap18.
uk_QP0_16441150#BVISHALA#5d8f9460c01111dcafa2d27e2000f002#Thread[PRT-Async 2,5,P
RT-Async]##0#0#Error##Java###06:56_11/01/08_16441150
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in in
it method
Component : com.tw.navigation.Masthead.HeaderiView
        at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
lComponentContext.java:251)
        at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refr
esh(PortalComponentContextItem.java:271)
        at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getC
ontext(PortalComponentContextItem.java:316)
        at com.sapportals.portal.prt.component.PortalComponentRequest.getCompone
ntContext(PortalComponentRequest.java:387)
        at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.j
ava:443)
        at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391
        at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.j
ava:233)
        at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:6
36)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
nt(AbstractPortalComponent.java:388)
        at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:816
        at com.sapportals.portal.prt.component.CachablePortalComponent.handleEve
nt(CachablePortalComponent.java:703)
        at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
.java:252)
        at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
ava:368)
        at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
java:340)
        at com.sapportals.portal.navigation.PortalLauncher.doOnNodeReady(PortalL
auncher.java:318)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
nt(AbstractPortalComponent.java:388)
        at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
.java:252)
        at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
ava:368)
        at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
java:340)
        at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(P
ortalRequestManager.java:642)
        at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(
ServletConnection.java:240)
        at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatc
her.java:524)
        at java.security.AccessController.doPrivileged(AccessController.java:242
        at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.ja
va:407)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.se
rvice(InvokerServlet.java:156)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
Impl.doWork(RequestDispatcherImpl.java:321)
        at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
Impl.forward(RequestDispatcherImpl.java:377)
        at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServle
t(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReq
uest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
t(RequestAnalizer.java:387)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
t(RequestAnalizer.java:365)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebCo
ntainer(RequestAnalizer.java:944)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(Requ
estAnalizer.java:266)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:9
5)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor
.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSes
sionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRu
nner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:3
7)
        at java.security.AccessController.doPrivileged(AccessController.java:215
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.ja
va:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:1
70)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationExc
eption: Could not instantiate implementation class com.btexx.pct.easyWCM.navigat
ion.masthead.HeaderiView of Portal Component com.tw.navigation.Masthead.HeaderiV
iew because: Could not find implementation class
        at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
stanceInternal(PortalComponentItemFacade.java:242)
        at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getCo
mponentInstance(PortalComponentItemFacade.java:160)
        at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponen
tInstance(PortalComponentItem.java:732)
        at com.sapportals.portal.prt.component.PortalComponentContext.getCompone
nt(PortalComponentContext.java:103)
        at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
lComponentContext.java:242)
        ... 44 more
Caused by: java.lang.ClassNotFoundException: com.btexx.pct.easyWCM.navigation.ma
sthead.HeaderiView
        at java.lang.Class.forNameImpl(Native Method)
        at java.lang.Class.forName(Class.java:152)
        at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
stanceInternal(PortalComponentItemFacade.java:228)
        ... 48 more
Kindly help me to resolve this issue.
Many Thanks,
B.Vishali.

Hi,
The problem might be caused by the version inconsistency of your J2EE and Portal Platform.
Please check the version of your J2EE and Portal.
Best Regards,
Assaf

Error while uploading the attachement in IW32.

Hi,
Getting the error message "Include file in PC application Try again?" in the message box "Read Error during PC Upload"
while uploading the attachement in IW32.

hello
The issue is no application issue but BC one. are you using Office 2007 or 2003 or 2010?
please first check the information from OSS note 1237688, and see if entries exist for the Office release document classes (for exmple docx, xlsx etc.) in OAD2.
i hope can be any of help.
Regards,
Jane

Error while updating the Patch

Hi,
I defined import queue to import the patches for SAP_BASIS, but while importing the patches it gives error "Current program has been modified while running", & screen become blank, I try so many times to continue & after that I click from menu error -> Exit.
After this I again started importing patches & the patches are imported successfully with the remaining steps.
I want to know is this is a proper steps or It cause any inconsistency to the system? Please suggest.
Regards,
Rajesh

Hi Rajesh,
This is a very much standard practice when you are applying , specifically SAP_BASIS . There will be no impact because of this, you can go a head with other required patches.
Regards,
Hari.
PS: Awarding point's will get you some points.

Error while uploading the file from Allpcation server in LSMW-7th step

Hi Experts,
what should be the specific CODE PAGE should be maintained while uploading the file from application server in LSMW-7th Step
Thanks in advance,
KSR

Hi
I mean that there is any seperate CODE PAGE which comes at the bottom of screen while uploading the file from the application server in 7th step.
Is there any specific CODE PAGE to be maintained...
Thanks in advance
Oarsk

AIR for iOS getting error while uploading the app, ITMS-9000 "Missing Provisioning Profile"

hi!
I get this error, when uploading the binary to Itunes. Any help, on how to solve out this problem ? And what does it mean ?

for install on devices, you need to use a distribution cert. and a distribution provisioning profile for adhoc. When ready for AppStore you can use same distribution cert. but distribution provision profile for appstore. i completely use Windows PC for my entire process and use testflight to distribute to my testers. I'm not sure how the process is for simulator on the Mac is. I just the use mac to create my certs and profiles and then application loader.
When you tried upload to testflight did u use a distribution cert (p12) and an adhoc distibution provisioning profile. Also are the devices you are sending to are also registered to that profile.
Also ive been doing this for 3 years now but consider myself a newbie still cuz I'm self taught and still learning and my ways of doing things in an unorthodox way but on average I have about 10 uploads of updates or new apps to the AppStore a year and haven't had an app rejected. These forms will be your best resource of info with users like @colin.

Error while applying the patch 9239089

Dear All,
I have installed the Oracle E-Business Suite Release 12(12.1.1) on Windows 2003 (32-bit) OS successfully.Its a single node installation.
Hardware & Software Specifications:
- Intel Core 2 Duo, CPU 2.40 GHz
- 2 GB of RAM
- 180 GB Hard Drive
- Windows XP Professional with Sevice Pack 2
The problem is when I try to apply a patch 9239089, it gives error atleast 2-3 times as below
An error occurred while relinking application programs.
Continue as if it were successful [No] :
And the Patch gets completed.
Find the log of the patch below:
An error occurred while extracting files from library.
Continue as if it were successful [No] : Yes
Done extracting object modules from product libraries.
STOP_TASK: [Perform libout actions] [] [Mon Mar 28 2011 18:07:15]
STRT_TASK: [Perform version checking] [] [Mon Mar 28 2011 18:07:15]
Performing version checking...
Log and Info File sync point:
Mon Mar 28 2011 18:07:15
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
STOP_TASK: [Perform version checking] [] [Mon Mar 28 2011 18:07:15]
STRT_TASK: [Determine directories to create] [] [Mon Mar 28 2011 18:07:15]
Skipping...
Determine directories to create for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine directories to create] [] [Mon Mar 28 2011 18:07:15]
STRT_TASK: [Determine executables to link] [] [Mon Mar 28 2011 18:07:15]
Determining what executables to link...
STOP_TASK: [Determine executables to link] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine forms executable files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine forms to generate for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine forms executable files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine Reports PL/SQL library files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine Oracle Reports libraries to generate for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine Reports PL/SQL library files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine Reports files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine reports to generate for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine Reports files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Determine message files to generate] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Determine if need to generate message files for Specified driver
since no such action is present for this driver file
STOP_TASK: [Determine message files to generate] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Find bugs with no active actions] [] [Mon Mar 28 2011 18:07:16]
Looking for active bug fixes with no active actions...
About to turn off duplicate actions: Mon Mar 28 2011 18:07:16
Start of adptod(): Mon Mar 28 2011 18:07:16
Actions scanned: 382
Duplicate actions: 0
End of adptod(): Mon Mar 28 2011 18:07:16
Done turning off duplicate actions: Mon Mar 28 2011 18:07:16
About to turn off bugs with no active actions: Mon Mar 28 2011 18:07:16
Start of adpunb(): Mon Mar 28 2011 18:07:16
Active bugs at start: 72
Bugs turned off: 71
Outer loop iterations: 72
Actions scanned: 47
End of adpunb(): Mon Mar 28 2011 18:07:16
Done turning off bugs with no active actions: Mon Mar 28 2011 18:07:16
About to save release list to filesystem: Mon Mar 28 2011 18:07:16
Done saving release list to filesystem: Mon Mar 28 2011 18:07:16
STOP_TASK: [Find bugs with no active actions] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Display customized files] [] [Mon Mar 28 2011 18:07:16]
Reading customized files list (if any)...
Did not find customized files registration file
"D:\oracle\PROD\apps\apps_st\appl\admin\applcust.txt"
The file may have been uploaded to the database.
This patch replaces the following customized files:
No customized files are replaced by this patch.
STOP_TASK: [Display customized files] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Copy files] [] [Mon Mar 28 2011 18:07:16]
Copying files into installation area...
No files were selected for copying.
STOP_TASK: [Copy files] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Forcecopy files] [] [Mon Mar 28 2011 18:07:16]
Skipping...
ForceCopy files into installation area for Specified driver
since no such action is present for this driver file
STOP_TASK: [Forcecopy files] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Perform libin actions] [] [Mon Mar 28 2011 18:07:16]
Archiving object modules into product libraries...
No object modules were selected for archiving.
STOP_TASK: [Perform libin actions] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Create directories] [] [Mon Mar 28 2011 18:07:16]
Skipping...
Create Directories for Specified driver
since no such action is present for this driver file
STOP_TASK: [Create directories] [] [Mon Mar 28 2011 18:07:16]
STRT_TASK: [Relink executables] [] [Mon Mar 28 2011 18:07:16]
Relinking executables...
An error occurred while relinking application programs.
Continue as if it were successful [No] : Yes
AutoPatch is exiting successfully.
sqlplus -s APPS/***** @D:\oracle\PROD\apps\apps_st\appl\ad\12.0.0\sql\adtimrpt.sql 15831 adt15831
Spooling to adt15831.lst
Spooling to adt15831.csv
A job timing report has been generated for the current session.
You should check the file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\out\adt15831.lst
for details.
Purging timing information for prior sessions.
sqlplus -s APPS/***** @D:\oracle\PROD\apps\apps_st\appl\ad\12.0.0\sql\adtpurge.sql 10 1000
Done purging timing information for prior sessions.
AutoPatch is complete.
AutoPatch may have written informational messages to the file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\log\9239089.lgi
Errors and warnings are listed in the log file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\log\9239089.log
and in other log files in the same directory.
Regards,
Vinayak K

Hi,
Find the Output
D:\oracle\PROD\apps\apps_st\appl>make -v
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i686-pc-cygwin
D:\oracle\PROD\apps\apps_st\appl>gnumake -v
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for Windows32
D:\oracle\PROD\apps\apps_st\appl>APPSPROD_ebstest.cmd
ECHO is off.
ECHO is off.
Tue 03/29/2011 07:05 PM
ECHO is off.
ECHO is off.
This script requires the following files:
ECHO is off.
C:\MSV\VC\bin\bin\vcvars32.bat
ECHO is off.
APPSORA.cmd exiting with status 0
D:\oracle\PROD\apps\apps_st\appl>echo %PATH%
D:\oracle\PROD\apps\apps_st\appl\au\12.0.0\bin;D:\oracle\PROD\apps\apps_st\appl\
fnd\12.0.0\bin;D:\oracle\PROD\apps\apps_st\appl\ad\12.0.0\bin;D:\oracle\PROD\app
s\tech_st\10.1.3\appsutil\jdk\jre\bin;D:\oracle\PROD\apps\tech_st\10.1.3\perl\5.
8.3\bin\MSWin32-x86-multi-thread\;D:\oracle\PROD\apps\apps_st\comn\util\unzip\un
zip;D:\oracle\PROD\apps\tech_st\10.1.3\appsutil\jdk\bin;D:\oracle\PROD\apps\tech
st\10.1.2\bin;D:\oracle\PROD\apps\techst\10.1.3\appsutil\jdk\bin;D:\oracle\PRO
D\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;C:\cygwin\bin;C:\WINDOWS;C:\WINDOWS\s
ystem32;D:\oracle\PROD\apps\tech_st\10.1.3\ant\bin
D:\oracle\PROD\apps\apps_st\appl>
Regards,
Vinayak K

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

Error while uploading the general maintenance task list with LSMW

Hi friends,
I am uploading the general maintenance task list with the help of Standard Batch/Direct input method in LSMW. I am using the internal number range for task list.
First task list is getting created properly, but while creating second task list, system is giving the error as "external number range is not assigned for task list and task list with this group ID is already created in the system."
This is because, on initial screen, system automatically takes the group ID of the task list that is created earlier.
My question is
1. How to get rid of the group number that is automatically gets populated in group field of initial screen, while creating the next task list?
2. Is it possible to assign a common identifier in all structure (Header, Operation etc) for single task list, so that system can differentiate between two task lists?
In Equipment task list, we can differentiate the task list with equipment id and group counter.
Please note the following point before replying to my question.
1. I don't want to upload the general maintenance task list with external number assignment.
Thanks in advance for early reply.

I have the same problem....
Please can somebody help me?

Error while applying the patch 9909156

while applying patch 9909156. I am getting jsp compilation errors in the patch log
[1634474] !!COMPILATION ERROR(0) ibeCRgpPartnerPriCreate.jsp:
this is similar MOS doc 579439.1 - Application Of Patch 5720979 Results In COMPILATION ERROR(0) ibeCOtdOrdCancelMain.jsp. Can you confirm please?
Patch 6128322 is for module iStore which is inactive on our system . Patch 5720979 was applied to the system (most likely as cumulative CPU). Can you confirm that given the module is inactive if we need to apply patch 6128322

This is the error in the log file we are using 11.5.10.2
[1634474] !!COMPILATION ERROR(0) ibeCRgpBusinessCreate.jsp:
_ibeCRgpBusinessCreate.java:856: cannot find symbol
symbol : variable USERNAME_NOT_FOUND
location: class oracle.apps.ibe.um.UserManager
String usernameTestStatusCode=UserManager.USERNAME_NOT_FOUND;
^
_ibeCRgpBusinessCreate.java:858: cannot find symbol
symbol : variable SELF_REGISTRATION
location: class oracle.apps.ibe.um.UserManager
usernameTestStatusCode=UserManager.checkUsernameExists(usernameUpper, UserManager.SELF_REGISTRATION);
^
_ibeCRgpBusinessCreate.java:896: cannot find symbol
symbol : variable USERNAME_NOT_FOUND
location: class oracle.apps.ibe.um.UserManager
else if(ibeRegKnownUser==null && ! usernameTestStatusCode.equals(UserManager.USERNAME_NOT_FOUND))

DDIC ACTIVATION error while uploading the patch sapkb70009

Similar Messages

Maybe you are looking for