DDIC_ACTIVATION-Support Package - Hanged

Hello all,
What exactly i can do if my support package of SAPKB70009 hanged at DDIC_ACTIVATION phase any clues from Gurus.
Cheers,
Rahul

Rahul,
1. Check whether you have a previous backup
2. Delete the entry in table PAT01 (after copying it out)
3. Change the entry in PAT03 back to ready for import
4. You need to check in STMS import monitor that it is not in there as importing and if it is, delete it from the monitor
5. Check any cofile for entries inside it indicating it is importing.
6. Check for any batch job hanging and SM12 locks
there's probably other things that can give it grief but cannot think of them.
Then try importing the other pack.
I hope it goes fine.
Cheers
Deepanshu Sharma

Similar Messages

  • DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0

    Hi Gurus,
    I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
    I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
    Can you please help to reset the queue and implementing this support package.
    Thank you,
    Regards,
    Ganesh

    Paste the SPAM log here.
    Regards,
    Nick Loy

  • Support Package SAPKB71101 hangs while applying

    Hi,
    I am applying basis support package SAPKB71101, it is getting hanged in Main Import. I was trying to import from last 4 days. But still it is hanged in the Main Import only. When i try to check the log in Slog, i am getting the warning as /usr/sap/trans/tmp/SAPKKB711001.PI7 is already in use (1890), I'm waiting 1 sec  (20100325184152). My name: Pid 26022.
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (1850), I'm waiting 3 sec (20100325183950). My name: pid 26022
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (230), I'm waiting 5 sec (20100325184000). My name: pid 8531 o
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (830), I'm waiting 5 sec (20100325184001). My name: pid 11084
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (1860), I'm waiting 1 sec (20100325184022). My name: pid 26022
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (240), I'm waiting 4 sec (20100325184031). My name: pid 8531 o
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (840), I'm waiting 3 sec (20100325184031). My name: pid 11084
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (1870), I'm waiting 3 sec (20100325184054). My name: pid 26022
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (850), I'm waiting 1 sec (20100325184056). My name: pid 11084
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (250), I'm waiting 4 sec (20100325184100). My name: pid 8531 o
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (1880), I'm waiting 4 sec (20100325184119). My name: pid 26022
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (860), I'm waiting 5 sec (20100325184125). My name: pid 11084
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (260), I'm waiting 5 sec (20100325184131). My name: pid 8531 o
    WARNING: /usr/sap/trans/tmp/SAPKKB71101.PI7 is already in use (1890), I'm waiting 1 sec (20100325184152). My name: pid 26022
    I am getting this warning continously. Please suggest me the solution.
    Regards
    Karunakar

    Hi,
    Could you check if a (tp or R3trans)  still exists  for the same PID.
    If this process does, exist, you can
    1. wait for a time when no normal transports (STMS, tp, ...) run.
    2. wait for a time when nothing is done in SPAM or SAINT.
    3. also no client exports or imports should be done, so no tp or  R3trans process should run on the System.
    4. If then still tp or R3trans processes run, kill the R3trans  processes at Operating system level.
    5. wait a bit and then also the tp processes should end with an error.
    6. check again tht no tp and no R3trans process exists on the  server.
    7. Go to /usr/sap/trans/tmp and check whether there is file names SAPKKB71101.PI7.
        rename the file SAPKKB71101.PI7 to SAPKKB71101.PI7.old
       The system will create a file again in DIR_TRANS/tmp when new TP process is trigger later.
    Read note #12746.
    Best Regards
    Niraj

  • DDIC_ACTIVATION ERROR WHILW APPLYING SUPPORT PACKAGES

    Hi all,
    While applying support package(KB62019),i got error(DDIC_Activation)..
    How to resolve it?
    Thanks in advance.

    Hi,
    Which support package are you applying ? Have a look at these notes: 782140 and 447925.
    Search for SAPKB62019 in this note and you will get a solution to that. The note refers to some more notes. Please follow the instuctions in the note carefully.
    Cheers,
    Sunil
    PS: Reward points for helpful answers.

  • Error in "Test IMPORT" during applying BASIS Support Package

    Hi All,
    I'm applying basis support package from SAPKB70014 to SAPKB70018,
    now it hangs in Import phase:     TEST_IMPORT, there maybe something wrong with the import object.
    For detail screenshots, please kindly have a look at URL: http://nickfiles.150m.com/Question_1.html
    And for the detail import log, please have a look at http://nickfiles.150m.com/SAPPB70015.html.
    I think the root cause is located in:
    2EETW165 Function "TMW_TAOAGENT (TMW_TAOINTERFACE|01)" does not fit into the existing function group "(TMW_CLIENT_INTERFACES|06)".
    2 ETW167 Please transport the whole function group.
    But I do not know how to solve it. Could anyone help me?
    Thank you very much.
    Best regards,
    Nick

    Hi Nick,
    This is the solution to your Issue..
    Note 1156706 - Function TMW_TAOAGENT (TMW_TAOINTERFACE 01) does not fit...
    Other SAPnote you can read .. for your help..
    Note 42379 - SPAM aborts at step TEST_IMPORT
    Note 1092979 - TMW_TAOAGENT: Repairing function group after SAPKB70013
    Hope it will solve your issue ....
    All teh best !!

  • Support Package Apply

    hi,
       To get the TDS certificate in a new format (funvtionality) we have to apply new support package.
       My system is ECC-6.0 & SPAM/SAINT version is 7.00/0023.
       So i applied SPAM/SAINT 7.00/0034. & it was succesed & after that when appply Basis SAPKB70012
       it was succesfully by when i again execute T-code SPAM it is showing Error in ABAP_GENRATION 
      Can anybody suggest me.
    Thanks in advance
    Regards
    Manoj

    hi,
       thanks for respons. i went to SE38-->RSSPAM10 i got this report
                                    SPAM                                   SAINT                                                  
         Name       Update        Test      Standard     Downt.min.        Test      Standard     Downt.min.
    1  PROLOGUE         X         X         X         X         X         X         X
    2  CHECK_REQUIREMENTS         X         X         X         X         X         X         X
    3  DISASSEMBLE         X         X         X         X         X         X         X
    4  CREATE_COMPONENTS                             X         X         X
    5  ADD_TO_BUFFER         X         X         X         X         X         X         X
    6  MODIFY_BUFFER         X         X         X         X         X         X         X
    7  ADD_SYNCMARKS                                  X         X
    8  IMPORT_OBJECT_LIST         X         X         X         X         X         X         X
    9  OBJECTS_LOCKED_?         X         X         X         X         X         X         X
    10 TEST_IMPORT         X         X         X         X         X         X         X
    11 ADDON_CONFLICTS_?              X         X         X         X         X         X
    12 OPTIMIZE_OBJLISTS                                   
    13 SCHEDULE_RDDIMPDP         X              X         X              X         X
    14 CREATE_VERS_BEFORE                   X         X              X         X
    15 SPDD_SPAU_CHECK              X         X         X         X         X         X
    16 DDIC_IMPORT                   X         X              X         X
    17 AUTO_MOD_SPDD                   X         X              X         X
    18 RUN_SPDD_?                   X         X              X         X
    19 LOCK_EU                        X                   X
    20 INACTIVE_IMPORT                        X                   X
    21 DDIC_ACTIVATION                   X         X              X         X
    22 IMPORT_PROPER         X              X         X              X         X
    23 PREPARE_XPRA                   X         X              X         X
    24 UNLOCK_EU                        X                   X
    25 AUTO_MOD_SPAU                   X         X              X         X
    26 XPRA_EXECUTION                   X         X              X         X
    27 ABAP_GENERATION                   X         X              X         X
    28 RUN_SPAU_?              X         X         X         X         X         X
    29 CLEAR_OLD_REPORTS                        X                   X
    30 EPILOGUE         X         X         X         X         X         X         X

  • Support Package Problem

    Hi Experts,
      While applying the support package of BASIS (KB70012) and ABAP (KA70012) in SAP ECC 6.0.we get the following error.
    <i>The import was stopped, since an error occurred during the phase
    DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
        -   Error in phase: DDIC_ACTIVATION
        -   Reason for error: TP_CANNOT_CONNECT_SYSTEM
        -   Return code: 0230
       -   Error message: Cant create any process
    When I go through the command mode and type tp connect <sid> & tp connect <sid> pf=g:\usr\sap\trans\bin\ TP_DOMAIN_S10.PFL
    It’s give the following error.
    G:\usr\sap\trans>tp connect S10
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 372.04.04 (release 700)
    E-TPSETTINGS could not be opened.
    EXIT
    ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
    Error in TPSETTINGS: transdir not set.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0208
    tp finished with return code: 208
    meaning:
      error in transportprofil (param missing, unknown,...)
    G:\usr\sap\trans>tp connect S10 pf=G:\usr\sap\trans\bin\TP_DOMAIN_S10.PFL
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 372.04.04 (release 700)
    Connection to Database of S10 was successful.
    punesrv02\usr\sap\trans\tmp\C071023.S10 for transport: ALL: No such file or di
    rectory
    punesrv02\usr\sap\trans\tmp\SLOG0743.S10.LOC: No such file or directory
    PANIC --> exiting
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0212
    tp finished with return code: 212
    meaning:
      could not access file as supposed (see dev_tp or SLOG0743.S10 for more details
    Please help me.

    Hi Sateesh,
    It seems like your transport management system is not configured properly, Just check your CTS. is it configured properly.
    Check your transport directory too.
    when you imort a support patch it creates a file in this location. this message are co,img that means you transport directory is not configured properly.
    \punesrv02\usr\sap\trans\tmp\C071023.S10 for transport: ALL: No such file or di
    rectory
    punesrv02\usr\sap\trans\tmp\SLOG0743.S10.LOC: No such file or directory
    Regards
    Subhash

  • Scheduled Packages Hanging (BPC ver 5.0)

    Hello,
    We are having a problem "scheduling" standard SSIS packages for e.g. import package. When we schedule a package, the package runs successfully for 3 or 4 days (i.e. 3 to 4 cycles) but the package hangs after that. When this happens event though the "Package Schedule Status" shows the status "Running" and the package itself is not executed ("View Package Status" does not show any activity on the package).
    Has anyone encountered this issue? If so how can we solve this? (This is a significant issue for us since we cannot reliably schedule any packages)
    FYI, we are still on BPC ver 5.0.
    Thank you & regards
    Raja

    Iwould venture a guess that if you are seeing the issue in version 5.0 SP (ANY), that the issue was subsequently solved and fixed in either 5.1 SP(X) or 7.0SP(X).  The best chance of determining this is to log a ticket with SAP support for clarification on timing of the issue and resolution.  Otherwise, you would need to search the Release Notes from version 5.1 forward to see if and when the problem was resolved.
    My immediate advice is to plan accordingly for an upgrade to the newest BPC version on either the MIcrosoft or Netweaver platform.  As it relates to the issue at hand; You may want to try to truncate the log table every 2 days and see if that impacts the locking, otherwise, check for any proceses that run on the server or take it offline in the middle of you running the package.  I would imagine any MS updates or backup processes will "kill" the process mid stream.
    Hope this helps.

  • Support package update error

    Dear all,
    I am currently update my system.
    The current version is ECC6 EHP7 based on NW7.4
    SAP_BASIS 740 0002
    SAP_ABA 740 0002
    I would like to upgrade to SPS level 5
    We use DB2 LUW 10.5
    In the update phase, we encountered an error message:
    SQL-error "-203-SQL0203N  A reference to column "TABNAME" is ambiguou
    2EETP345 s.  SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL
    As I can see  in the log file, error messages are as below
    ===========================
    3 ETP399 "SHPOSITION", DD30L."AUTOSUGGEST" AS "AUTOSUGGEST" FROM "DD31S"
    3 ETP399 INNER JOIN "DD30L" ON "SHLPNAME" = "SUBSHLP" WHERE "AS4LOCAL" =
    3 ETP399 'A' AND "AS4LOCAL" = 'A' AND "HIDEFLAG" = ' ' AND "AUTOSUGGEST" = 'X'
    3 ETP399 
    2WETP000 06:42:38: Retcode 1: error in DDL statement for "V_DSH_ASSIGNED                " - repeat
    2EETP345 06:42:50: Retcode 1: SQL-error "-203-SQL0203N  A reference to column "SHLPNAME" is ambiguo
    2EETP345 us.  SQLSTATE=42702" in DDL statement for "V_DSH_ASSIGNED                "
    2 ETP399  --------------- DB-ROLLBACK() ---------------
    2EETP334 06:42:50: error in DDL, nametab for "V_DSH_ASSIGNED" not activated
    3 ETP379X06:42:50: activating Nametab "V_DSH_TF_DETAIL":
    3 ETP355Xstatements:
    3 ETP399 CREATE VIEW "V_DSH_TF_DETAIL" AS SELECT DD02L."TABNAME" AS
    3 ETP399 "TABNAME", DD03L."FIELDNAME" AS "FIELDNAME", DD02L."TABCLASS" AS
    3 ETP399 "TABCLASS", DD03L."SHLPORIGIN" AS "SHLPORIGIN" FROM "DD02L" INNER
    3 ETP399 JOIN "DD03L" ON "TABNAME" = "TABNAME" WHERE "AS4LOCAL" = 'A' AND
    3 ETP399 "AS4LOCAL" = 'A'
    3 ETP399 
    2WETP000 06:42:50: Retcode 1: error in DDL statement for "V_DSH_TF_DETAIL               " - repeat
    2EETP345 06:43:02: Retcode 1: SQL-error "-203-SQL0203N  A reference to column "TABNAME" is ambiguou
    2EETP345 s.  SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL               "
    2 ETP399  --------------- DB-ROLLBACK() ---------------
    2EETP334 06:43:02: error in DDL, nametab for "V_DSH_TF_DETAIL" not activated
    2 ETP301 ----------------------------------------------------------------------
    3 ETP361 "0" Shadow-Nametabs activated, DDL executed
    2 ETP362 "2" Shadow-Nametab activations failed
    2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/03/19 06:42:38")
    2 ETP363 End  : Act. of Shadow-Nametabs with DDL ("2014/03/19 06:43:02")
    2 ETP301 ----------------------------------------------------------------------
    2 ETP301 ----------------------------------------------------------------------
    2 ETP364 Begin: Act. of Shadow-Nametabs ("2014/03/19 06:43:02")
    2 ETP301 ----------------------------------------------------------------------
    2 ETP301 ----------------------------------------------------------------------
    2 ETP338XTouch Load of nametabs
    ===========================
    I have checked another system which is also ehp7 based on NW740 0005, the view "V_DSH_TF_DETAIL" totally doesn't exist, but that is oracle database, here in my case is DB2 database, I have searched for SAP OSS but seems no sap notes for it.
    Do you have any idea how to solve this problem? Big thanks!
    Best regards,
    Fresh man

    Hi Ashutosh,
    Many thanks for your reply, yes this definitely solve my problem.
    But I feel quite confused what's the real reason.
    Several weeks ago, I update a system (EHP7+Oracle) from 74002 to 74005, with SUM, no such problem, however this time, its EHP7+DB2 10.5, from 74002 to 74004, with SPAM, met this kind of problem...
    The support packages are totally the same...
    is it because I should upgrade from 02 to 05 directly? 04 has problem?
    or I should update with SUM instead of SPAM?
    or it is because of DB2??
    or I should involve other packages like something like ST into the update queue?
    Best regards,
    Fresh

  • Support Package error

    Hi Experts,
    Currently i am installing suppport package for  PI 7.10.
    SP : SAP_BASIS.
    Just newly installed the sap system -> after kernel upgrade, i applied latest SPAM verion - 27.
    NowBusiness package SAP -basis is in the process. I started the package three hours back. still is in the process. i chcked the log files /usr/sap/trans/tmp/SAPIB71006.<SID>
    ====================================================================     ).
    4 ETW000   1 entry for SOTR_TEXT rejected - language not installed (00127991401D
    1DEBBA864FE336A2EB85J*
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW000   0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85E*)
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW000   0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85D*)
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW000   0 entries for SOTR_HEAD imported (00127991401D1DEBB0E8673749278B85*).
    4 ETW690 COMMIT "0" "1008778130"
    4 ETW000   0 entries for SOTR_TEXT imported (00127991401D1DEBB0E8673749278B85J*
    4 ETW000   1 entry for SOTR_TEXT rejected - language not installed (00127991401D
    1DEBB0E8673749278B85J*
    4 ETW690 COMMIT "0" "1008778130"
    =====================================================================
    Observed that error says `entry for SOTR_TEXT rejected - language not installed`
    I have not installed the language import till now. I am wondering that that could be an issue.
    My logs are keep updating. symptom tells than till import is in the progress.
    Could someone reply, Does the Language import must  for Support package installation ?.
    Now Spam screen says that  `Main import ` on the screen.
    Thanks
    Thirumal

    Hi Vani,
    Thank you very much,
    SAP_Basis package has been successfully completed. As  u said language import not required to update support packages.
    It took me around 7 hours to complete the update.Now i have started the Rest of the Business package.
    It seems its totally killing my time.  I think it shouldnot take this much time to complete a single package I need to install other packages like .
    SAP_ABA, PI_Basis,SAP_BW and ST_PI.
    Hi Vamshi,
       Thank you. Finally package completed.
    Thanks and Regards
    Thirumal

  • Import Basis Support Package 7.00 error

    Hi All,
    I wanted to apply Basis support package 9 for release 7.00 for our solution manager 4.0 system.
    When i started, it gave an error in the phase ADDON_CONFLICT? stage.. The message is as below:
    Phase ADDON_CONFLICTS_?: Explanation of Errors
    Conflicts were found between the Support Packages that you want to
    import and the Add-Ons installed in the system. To guarantee the
    consistency of your system, the import is interrupted until all Conflict
    Resolution Transports (CRTs) for the listed Support Packages are
    included in the queue.
    To include the CRTs in the queue, proceed as follows:
    - Write down the Support Packages and Add-Ons that have conflicts.
    - Leave this screen by choosing 'Cancel' (F12).
    - Load the CRTs for the Support Packages with conflicts from the SAP
      Service Marketplace or request them from your Add-On supplier.
    - Define the extended queue again in the Support Package Manager.
    - Import the queue. The Support Package Manager executes all steps from
      the beginning.
    If the problem involves an SAP Add-On, see SAP Note 53902, which tells
    you which CRTs resolve the conflicts. Otherwise contact the supplier of
    your Add-On for details on how to proceed.
    The following contains a table of Support Packages for each Add-On for
    which conflicts were detected. The column 'Information on the Conflict
    Resolution' specifies how you can resolve a conflict. For more
    information, select the corresponding 'Information for the Conflict
    Resolution'.
    Conflicts Between Add-On ST 400 and Support Packages
    Software Component   Release      Support Package        Information on
                                                             Conflict Resolution
    SAP_BASIS            700          SAPKB70009             Include CRT
    Can anyone guide me how to proceed.
    Thanks,
    Sailesh K

    Hi Shailesh,
    You are employing one or more Add-Ons in your system, apply patches regularly and want to know how the consistency of your Add-Ons is guaranteed. The list of Add-Ons installed in your system is stored in table AVERS.
    During patch application the SAP Patch Manager (SPAM) checks for conflicts between patches in the queue and the installed Add-Ons. A conflict occurs if an object delivered in a patch is also delivered in an Add-On. If conflicts are detected, SPAM stops processing at step ADDON_CONFLICTS_? and asks the user to load the corresponding CRTs into his system. The attributes of such CRTs match the Add-On id, Add-On release and patch predecessor (i.e. the patch in conflict).
    The patch application can only resume if all CRTs are selected in the patch queue. To resolve a conflict SPAM does not check if the conflicting object is contained in a CRT. It suffices that the corresponding CRT has been selected in the patch queue. All conflicts raised by its patch predecessor(s) are then resolved in one go.
    CRTs were introduced to protect the consistency of Add-Ons during the application of patches, such as Hot Packages and Legal Change Patches (LCP). There are two types of CRTs:
    1. Conflict Resolution Transports (CRT)
    A CRT resolves conflicts between one patch and one version of an Add-On including all previous versions. Example:
    Consider a system where Add-On IS-X is installed. During the application of patches P1 and P2 SPAM detected conflicts between the patches and the Add-On.
    To resolve these conflicts two separate CRTs are required, CRT1 and CRT2. A consistent patch queue looks like this:
        P1
        CRT1
        P2
        CRT2
    SPAM will only let you resume the patch application if you redefine the patch queue containing all four patches. You can see the name of the patch for which a CRT resolves a conflict in the "Predecessor" field in the patch queue dialog.
    2. Collective Conflict Resolution Transports (CCRT) are similar to CRTs but resolve conflicts between several patches and an Add-On. Example:
    Consider the previous example but this time the conflicts between patches P1, P2 and Add-On IS-X are resolved not by two CRTs but by one Collective CRT (CCRT) CCRT1. A consistent patch queue looks like this:
    P1
    P2
    CCRT1
    SPAM will only let you resume the patch application if you redefine the patch queue containing all three patches. The CCRT is added at the end of its highest predecessor, here P2. You can see the highest predecessor for a CCRT in field "Valid to patch#" when you scroll the patch queue dialog to the right.
    Keep in mind that a CCRT describes a range of patches for which conflicts are resolved, with the lower limit being the predecessor and higher limit the highest predecessor.
    Cheers,
    Shyam

  • Error in the phase IMPORT_PROPER while applying support packages

    Dear All,
    I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
    I have successfully applied the kernel patch and started applying the support packages,  i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
    ========================================================================================================
    START imp all              SCD        20081229080538              DDIC         sealcpro 20081229080537
    INFO: event SAP_IMPORT_START triggered successfully
    INFO  TBATG CONVERSION OF  SCD N      not needed                  DDIC         sealcpro 20081229080537
    START tp_getprots          SCD P      20081229080539              DDIC         sealcpro 20081229080537
    2EETP000 sap_dext called with msgnr "1":
    2EETP000      db call info
    2EETP000 function:   db_setget
    2EETP000 fcode:      RT_SETB (65535)
    2EETP000 tabname:    TRBAT
    2EETP000 len (char): 0
    2EETP000 key:
    2EETP000 retcode:    1
    1AETP000 exit in function texitnow
    ERROR: EXIT(16) -> process ID is: 5319
    STOP  imp all              SCD   0016 20081229080602              DDIC         sealcpro 20081229080537
    =========================================================================================================
    And also when i look at the Support package import logs they show that
    TEST IMPORT
    Import ABAP Dictionary Objects and
    ABAP Dictionary Activation phases ended with return code 4
    But i dont think this can give any problem.
    I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
    I had to start SAP and only then i was able to connect to the SERVER again.
    Can you please help me on this..
    For any more information plz let me know
    Thanks and regards
    Hunky

    Dear Balaji,
    Thank you very much for the reply...
    I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
    But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
    ===================================================================
    DBIF_REPO_INTERNAL_ERROR
    Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
    An unspecified internal error occurred in the SAP-internal
    database interface.
    For further analysis the SAP system log should be examined
    (transaction SM21).
    Check the entries in the developer trace of the relevant work process
    (transaction ST11).
    Attempted to access component "LOAD" of program
    "CX_SY_OPEN_SQL_DB=============CP ".
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_INTERNAL_ERROR" " "
    "SAPLSTPA" or " "
    ==========================================================================
    Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
    So i request you to kindly help me on this as i am running out of time in delivering my server.
    Waiting for all the valuble replies
    Thank you in advance
    Regards
    Hunky

  • Import support package SAPKB70015 at PI System is stuck on IMPORT_PROPER

    Dear Expert,
    I have some problem when import support package SAPKB70015 at PI System.
    IT had shown as below.
    Main import
    Transport request : SAPKB70015
    System : CXI
    tp path : tp
    Version and release: 372.04.08 700
    sap_dext called with msgnr 4:
    db call info
    function: db_report_interface
    fcode: UPDATE_REPORT
    tabname: TEXT
    len (char): 40
    key: /OSP/CL_CJS_CONTEXT===========CP
    retcode: 4
    Main import
    End date and time : 20081120021353
    Ended with return code: ===> 12 <===
    And I checked the transport log,It shown as below.
    4 ETW690 COMMIT "360444" "53156878"
    3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
    4 ETW000 1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT ).
    4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP A replaced.
    4 ETW000 dev trc ,00000 Thu Nov 20 02:13:53 2008 39924798 39.924798
    4 ETW000 http://dbsloci. ,00000 *** ERROR => Cannot update a LOB column for more than one row piecewise
    4 ETW000 85 39.924883
    4 ETW000 dev trc ,00000 sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
    e=REPOTEXT
    4 ETW000 66 39.924949
    4 ETW000 dev trc ,00000 prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
    4 ETW000 53 39.925002
    4 ETW000 dev trc ,00000 IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
    0a4220,vda_p=0x111e21a60
    4 ETW000 58 39.925060
    4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
    4 ETW000 48 39.925108
    4 ETW000 dev trc ,00000 OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
    11e222c0
    4 ETW000 55 39.925163
    4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
    4 ETW000 47 39.925210
    4 ETW000 dev trc ,00000 UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
    4 ETW000 51 39.925261
    4 ETW000 dev trc ,00000 RETURNING "DATA" INTO :A4; 29 39.925290
    4 ETW000 dbrepolo ,00735 ***LOG BZY=>unexpected return code 2 calling dbrepolo#? @ 735
    4 ETW000 75 39.925365
    2EETW000 sap_dext called with msgnr "4":
    2EETW000 -
    db call info -
    2EETW000 function: db_report_interface
    2EETW000 fcode: UPDATE_REPORT
    2EETW000 tabname: TEXT
    2EETW000 len (char): 40
    2EETW000 key: /OSP/CL_CJS_CONTEXT===========CP
    2EETW000 retcode: 4
    1 ETP154 MAIN IMPORT
    1 ETP110 end date and time : "20081120021353"
    1 ETP111 exit code : "12"
    1 ETP199 ######################################
    System information
    SAP = NW2004s SR3
    Database = Oracle 10.2.0.2
    OS versions = AIX 5.3
    Tp version = 700 Unicode 179
    R3trans version = 700 Unicode 183
    PS.I checked tp connect return code 0 and R3trans u2013s return code 0
    Could you please suggest how to fix this problem?
    Thank you very much
    Jaturong

    Iu2019ve updated database statistics and then try to reimport the package again. But It canu2019t import package.
    Are you still getting the same error after you retry the statistics update?

  • Applying BASIS support package 14 on IDES (DB2 & Windows)

    Hi all,
       I am trying to apply BASIS support package on IDES. Currently  process is running on IMPORT 2 step.  I run in diaglog and it was continuously showing MOVE NAMETABS at the end.  and in ST22 I see thousands of dumps being generated and almost all are related to    SYNTAX_ERROR
    Short text
        Syntax error in program "SAPLSALC ".
    at happened?
      Error in the ABAP Application Program
      The current ABAP program "SAPLSALI" had to be terminated because it has
      come across a statement that unfortunately cannot be executed.
      The following syntax error occurred in program "SAPLSALC " in include "LSALCU65
       " in
      line 1:
      "Function "SALC_INFO_GET_TREE" not found in Function Library."
      The include has been created and last changed by:
      Created by: "SAP "
      Last changed by: "SAP "
      Error in the ABAP Application Program
      The current ABAP program "SAPLSALI" had to be terminated because it has
      come across a statement that unfortunately cannot be executed.
    Can anyone of you help me on this issue.
    AWAITING REPLY
    Thanks

    >    I am trying to apply BASIS support package on IDES. Currently  process is running on IMPORT 2 step.  I run in diaglog and it was continuously showing MOVE NAMETABS at the end.  and in ST22 I see thousands of dumps being generated and almost all are related to    SYNTAX_ERROR
    There are a few known issues with KB70014, those are documented in
    Note 822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
    Markus

  • Error in Applying Java support packages through JSPM

    Hi All,
    While Applying support packages, Package CAF 7.00 SP 13 is through an error
    help required.
                       For detailed information see the log file of the Deploy Service.
    07/12/05 21:55:26 -  ***********************************************************
    Dec 5, 2007 9:55:26 PM   Info: End of log messages of the target system.
    Dec 5, 2007 9:55:26 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
    Dec 5, 2007 9:55:26 PM   Error: Aborted: development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0', grouped by software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/cafUIptn~common..
    Reason: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
         com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Dec 5, 2007 9:55:26 PM   Info: Starting to save the repository
    Dec 5, 2007 9:55:28 PM   Info: Finished saving the repository
    Dec 5, 2007 9:55:28 PM   Info: Starting: Update: Selected software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0' updates currently deployed software component 'CAF'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.0.20060221161956''/'0'.
    Dec 5, 2007 9:55:28 PM   Error: Aborted: software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
    Failed deployment of SDAs:
    development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0' : aborted
    Please, look at error logs above for more information!
    Dec 5, 2007 9:55:28 PM   Info: Starting to save the repository
    Dec 5, 2007 9:55:30 PM   Info: Finished saving the repository
    Dec 5, 2007 9:55:30 PM   Info: Starting: Update: Selected software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0' updates currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.1.20060302145618''/'0'.
    Dec 5, 2007 9:55:30 PM   Error: Aborted: software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0':
    No further description found.
    Dec 5, 2007 9:55:30 PM   Info: Starting to save the repository
    Dec 5, 2007 9:55:32 PM   Info: Finished saving the repository
    Dec 5, 2007 9:55:32 PM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
    Dec 5, 2007 9:55:32 PM   Error: -
    At least one of the Deployments failed -
    Regards,
    Prashant.

    Hello Prashant.
    Check this supporting SAP note 1010640. It will solve your problem.
    This is typical problem when you upgrade from < SP8 to higher version.
    You need to Undeploy the CAF components from the system using SDM first and then reply the patches from JSPM.
    It should go with out errors.
    Let us know if this worked.
    *Reward points for helpful answer.
    Regards,
    Prashant P.

Maybe you are looking for