Deactivate inspection type from material master

Dears
i have a inspetion qty with satus LTCA CHCR(Cancelled inspection lot)
Now i need to deactivate inspection type from material master
system not allowing to deavtivate as inspection lot was there
how to remove the insepction qty form system
Any tips
Faisal

Hi Faisal,
Hi Faisal,
Try this way,,,
Run QA08
Enter the Plant, Material Code
Then go for the Fourth tab "Mass Processing"
Activate the check box for Activate Despite Inspection Stock and Create Change Documents
Then insert the inspection type.
Execute
System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.
Select the Line item and Save.
Pls let me know if doesn't work.
Regards,
Shyamal
Let's do it again, When you complete the following steps, are you getting any list of materials there? after completing it up to
System will prompt a screen similar to Inspection set up from MM02, there deactivate the inspection type and press Enter.

Similar Messages

TCode for collective changes in inspection type in Material Master

Hi
Can any one tell me the TCODE for mass changes for inspection type in Material Master.
Charuhas

you can use MM17 or through LSMW or create a BDC through ABAP.
Regards,
qsm sap

Update inspection type in material master

Dear Experts,
Can anybody please tell me how I can activate inspection type 09 in all material master for all plant in one shot.
And how I can extend material to another plant in one shot. e.g We have 450 material created for plant 1000 & now we want to extend all that material for plant 1200.
Regards,
Raja

Can anybody please tell me how I can activate inspection type 09 in all material master for all plant in one shot.
use QA08, which is spcific designed as mass maintenance transaction for this purpose
Edited by: Jürgen L. on Aug 2, 2010 11:26 AM

Need to extract Post to inspection stock field from material master

Hi Guys,
I need to extract the Post to insp.stock indicator from material master QM view for all FERT materials, i have tried with MARC table but no use. Is there any alternative way to download this from the material master?, kindly help me resolve this.
Thanks
S.Murali

I got it from table QMAT.
Thanks
S.Murali

Deactivate inspection type 08 against mvt type 413

Dear Sir
Whenever planning person does 413 oe 413E movement for sales order transfer there is an error message combination of stock error and when i deactivate 08 from material master, they are able to do it.My concern why the error is shown nor inspection lot is genreated and how to deactivate against this movement.
regards
kunal

Dear,
You don't want inspection for 413 and 413 E then you need to active tick mark for both.
Also in Movement Type/Update Control/Inspection Lot Origin select movement type 413 check 08 insp orgin is there? from material master deactive 08 insp type. then system will not generate lot.
Please try this and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 9, 2009 4:33 PM

Standard price comes from material master

Dear All
How to get Material master standard price into purchase order instead of Purchase Info record.without creation P.R
best regrads
R.T

Hi,
That can be possible.. Pl go throgh the below process..
IMG- MM- Purchasing - Conditions- Define price determination process-
Define condition type- Select ur condition type(PBXX or PB00)- In condition there is option "Cond.Category" here put T or S.
Then create PO system automaticaly pick ur MAV or standard price from Material master.
Arun

Material Description to be overwritten in PR/PO from material master

Hi,
when we create a PO/PR from ME51n and ME21n the material description field is mandatory hence inspite of making setting as display only in SPRO the inital screen will except any description and will save it.
Is there any thing else by which the description data can be overwritten from material master so that even if the user enters any xyz description the system overwrites it from the material master.
Regards,
Reena

Hi,
You can very well achieve it by making the field "Material description" a "Display" field in the IMG path: Maintain screen layout at document level
However, you have to use the right "Field selection key" to make the screen changes. For eg. for NB purchase order, the field selection key would be NBF and not ME21N.
The field selection key that is applicable for the document type can be found in "Define Document types" img activity.
I have checked this and it works perfectly fine for both PR & PO.
Once you enter the material number in PR (or PO), the material description is brought from material master and then the field is greyed out. (thought initially the matl. description field looks editable).
<< Moderator message - Point begging removed >>
Cheers.
Prabhu S
Edited by: Rob Burbank on Nov 24, 2011 10:24 AM

Message Type for Material Master Data Changes

Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]

Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa

How to identify undefined classification material list from material master

Hi ,
1. I would like to identify the materials which is not having classification view from material master. 2. how to maintain the same in mass transaction. kindly give replies for the same.
Thanks,
Hari

Hello Kara,
To main classification in all materials follow the below process.
Go to t code MM50.
Insert material no. or number range, and material view from Maintenance status (classification) and after that press execute (F8) button.
Click on the check box and press Maintain materials button.
Select required class types and press enter.
Finally press save button.
Thanks.
Ashfaque Hasan.

Make optional from material master of Schedule Margin Key

Hi PP Guys
I am using MRP Type PD & there is no floats in schedule margin key.
So client want make a optional of schedule margin key from material master.
I tried from L-G --> Material Master --> Field Selection --> Assign Fields to Field Selection Gruops / Mainatin Field Selectio to data Screens.
Bur here this filed is optional.
I think some relation from MRP Type or What ?.
Pls suggest.
Regards
Ashish

Dear Asish,
This is the required master data to create order also, based on this only all your order dates are calculated, like when to release the order, start and finish and finaly material available to dispatch.
So for MRP calculation and to promise the delivery to sale order also it is must.
When u create order this gets copied to the order this u can see in production order Genaral data tab.
i hope u r clear
sree

Adding a new long-text type to Material Master

We need to add a long-text type to Material master, in addition to Basic, Inspection and Internal comment texts.
What would be the best way to do this?
Is there configuration that will allow the generation of a new tab in MM01 - Additional data screen, along with Basic, Inspection etc or should we create a new Screen exit for the new Text type to be edited?
If a screen Exit is available could you please name it?
Thanks a lot for the help - in Advance.

Hi,
You can add your own tabstrip in material master and put your long texts on it.
Please have a look at transactions OMT3C, OMT3B, OMT3E.
All customizing for material master extention can be found in SPRO -> Logistics - General -> Material Master -> Configuring the Material Master.
Krzys

Need to create a Store Business document type for material master and store a sharepoint link

Hello,
I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a store business document that it will automatically saves to sharepoint?)
Thanks,
Ran.

>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!!

How can we update insp. type in material master on mass basis.

Hi Team,
We are using LSMW for material master. I was told that we can not update inspection type through LSMW. Is it possible thru LSMW if not, how can we update insp. type in material master on mass basis.
Is there any T-Code to update mass chages for inspection type in material.
Please suggest.
Thanks

Hi,
You can use TCode -QA08.
This Tcode have facility to Inspection Type activation in single / mass material.
Also useful for deactivation, special setting at Inspection Type level.
Regards,
JM

Inter company PO is not pulling the valuation price from Material Master

Hi Experts,
We have a scenario, Inter-company PO with pricing procedure which pulls Material Price from Material Master (Std Price), similar to intra company PO
Even after maintaining the std price in the supplying plant , system is not pulling the Valuation price from Material master only for a particular Material
I checked the Plant level attributes ( for ex: Plant Mat status, client level status and everything looks fine )
Could you guys please mention what would be the issue ?
Thanks in advance
Illayaraja

Hi,
Is there a routine which pulls the value? then you need debug with ABAP help for that routine where its failing to pull
Thanks
Diwakar

Purchase group in Purchase order from creator not from Material Master

Hi All,
Can you please help me with the next one?
Points rewarded.
In the materialmaster is purchase group 44B entered but
The default purchase group of the buyer is 55C. Is it possible
that the value 55C is automaticaly placed in the PO when
the buyer creates the Purchase order?
At this moment always the default value from Material
master is proposed.
Thank you in advance,
Eric.

Hi,
You have to look at the overall process.
The idea of the Purchasing Group is to indicate which buyer manages that material in that plant.
SO when the system (or a user) generates a requisition for that item at that plant, the system then knows who should convert it etc.
So my question to you would be, "why have you got a default P group in the material master record that is NOT the buyer who manages that item at that plant?"
If several buyers share a list of materials then just use one P group for the "group" of buyers, instead of separate P groups for each buyer.
The system doesn't have the option to automatically overwrite the P group on the requisition because this may be someone just "helping out" the buyer who is busy and so it does not mean that the requisition should be changed to be linked to this other P group.
You already have the field "created by" on the PO and so if you need to report on who created what, then simply use this field instead of P group.
But the P group on the material master (and therefore the requisition) shoudl ALWAYS be the P group that will convert reqs for this item plant combination.
Steve B

Deactivate inspection type from material master

Similar Messages

Maybe you are looking for